forked from Minki/linux
3b79919946
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
316 lines
7.5 KiB
Plaintext
316 lines
7.5 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada 370 and Armada XP SoC
|
|
*
|
|
* Copyright (C) 2012 Marvell
|
|
*
|
|
* Lior Amsalem <alior@marvell.com>
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
* Ben Dooks <ben.dooks@codethink.co.uk>
|
|
*
|
|
* This file contains the definitions that are common to the Armada
|
|
* 370 and Armada XP SoC.
|
|
*/
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
/ {
|
|
model = "Marvell Armada 370 and XP SoC";
|
|
compatible = "marvell,armada-370-xp";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
compatible = "marvell,sheeva-v7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts-extended = <&mpic 3>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
interrupt-parent = <&mpic>;
|
|
pcie-mem-aperture = <0xf8000000 0x7e00000>;
|
|
pcie-io-aperture = <0xffe00000 0x100000>;
|
|
|
|
devbus_bootcs: devbus-bootcs {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs0: devbus-cs0 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs1: devbus-cs1 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs2: devbus-cs2 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs3: devbus-cs3 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
|
|
|
rtc: rtc@10300 {
|
|
compatible = "marvell,orion-rtc";
|
|
reg = <0x10300 0x20>;
|
|
interrupts = <50>;
|
|
};
|
|
|
|
i2c0: i2c@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <31>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@11100 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <32>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@12000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <41>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@12100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <42>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pin-ctrl@18000 {
|
|
reg = <0x18000 0x38>;
|
|
};
|
|
|
|
coredivclk: corediv-clock@18740 {
|
|
compatible = "marvell,armada-370-corediv-clock";
|
|
reg = <0x18740 0xc>;
|
|
#clock-cells = <1>;
|
|
clocks = <&mainpll>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>,
|
|
<0x20250 0x8>;
|
|
};
|
|
|
|
mpic: interrupt-controller@20a00 {
|
|
compatible = "marvell,mpic";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
msi-controller;
|
|
};
|
|
|
|
coherencyfab: coherency-fabric@20200 {
|
|
compatible = "marvell,coherency-fabric";
|
|
reg = <0x20200 0xb0>, <0x21010 0x1c>;
|
|
};
|
|
|
|
timer: timer@20300 {
|
|
reg = <0x20300 0x30>, <0x21040 0x30>;
|
|
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
|
|
};
|
|
|
|
watchdog: watchdog@20300 {
|
|
reg = <0x20300 0x34>, <0x20704 0x4>;
|
|
};
|
|
|
|
cpurst: cpurst@20800 {
|
|
compatible = "marvell,armada-370-cpu-reset";
|
|
reg = <0x20800 0x8>;
|
|
};
|
|
|
|
pmsu: pmsu@22000 {
|
|
compatible = "marvell,armada-370-pmsu";
|
|
reg = <0x22000 0x1000>;
|
|
};
|
|
|
|
usb0: usb@50000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x50000 0x500>;
|
|
interrupts = <45>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@51000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x51000 0x500>;
|
|
interrupts = <46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
eth0: ethernet@70000 {
|
|
reg = <0x70000 0x4000>;
|
|
interrupts = <8>;
|
|
clocks = <&gateclk 4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio: mdio@72004 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "marvell,orion-mdio";
|
|
reg = <0x72004 0x4>;
|
|
clocks = <&gateclk 4>;
|
|
};
|
|
|
|
eth1: ethernet@74000 {
|
|
reg = <0x74000 0x4000>;
|
|
interrupts = <10>;
|
|
clocks = <&gateclk 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata: sata@a0000 {
|
|
compatible = "marvell,armada-370-sata";
|
|
reg = <0xa0000 0x5000>;
|
|
interrupts = <55>;
|
|
clocks = <&gateclk 15>, <&gateclk 30>;
|
|
clock-names = "0", "1";
|
|
status = "disabled";
|
|
};
|
|
|
|
nand_controller: nand-controller@d0000 {
|
|
compatible = "marvell,armada370-nand-controller";
|
|
reg = <0xd0000 0x54>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <113>;
|
|
clocks = <&coredivclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdio: mvsdio@d4000 {
|
|
compatible = "marvell,orion-sdio";
|
|
reg = <0xd4000 0x200>;
|
|
interrupts = <54>;
|
|
clocks = <&gateclk 17>;
|
|
bus-width = <4>;
|
|
cap-sdio-irq;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi0: spi@10600 {
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
|
|
<MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
|
|
<MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
|
|
<MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
|
|
<MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
|
|
<MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
|
|
<MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
|
|
<MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
|
|
<MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
interrupts = <30>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@10680 {
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
|
|
<MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
|
|
<MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
|
|
<MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
|
|
<MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
|
|
<MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
|
|
<MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
|
|
<MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
|
|
<MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
interrupts = <92>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
/* 2 GHz fixed main PLL */
|
|
mainpll: mainpll {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <2000000000>;
|
|
};
|
|
};
|
|
};
|