forked from Minki/linux
a0386bba70
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
584 lines
13 KiB
C
584 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for 93xx46 EEPROMs
|
|
*
|
|
* (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/nvmem-provider.h>
|
|
#include <linux/eeprom_93xx46.h>
|
|
|
|
#define OP_START 0x4
|
|
#define OP_WRITE (OP_START | 0x1)
|
|
#define OP_READ (OP_START | 0x2)
|
|
#define ADDR_EWDS 0x00
|
|
#define ADDR_ERAL 0x20
|
|
#define ADDR_EWEN 0x30
|
|
|
|
struct eeprom_93xx46_devtype_data {
|
|
unsigned int quirks;
|
|
unsigned char flags;
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data at93c46_data = {
|
|
.flags = EE_SIZE1K,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data at93c56_data = {
|
|
.flags = EE_SIZE2K,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data at93c66_data = {
|
|
.flags = EE_SIZE4K,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
|
|
.flags = EE_SIZE1K,
|
|
.quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ |
|
|
EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = {
|
|
.flags = EE_SIZE1K,
|
|
.quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE,
|
|
};
|
|
|
|
struct eeprom_93xx46_dev {
|
|
struct spi_device *spi;
|
|
struct eeprom_93xx46_platform_data *pdata;
|
|
struct mutex lock;
|
|
struct nvmem_config nvmem_config;
|
|
struct nvmem_device *nvmem;
|
|
int addrlen;
|
|
int size;
|
|
};
|
|
|
|
static inline bool has_quirk_single_word_read(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
return edev->pdata->quirks & EEPROM_93XX46_QUIRK_SINGLE_WORD_READ;
|
|
}
|
|
|
|
static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH;
|
|
}
|
|
|
|
static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE;
|
|
}
|
|
|
|
static int eeprom_93xx46_read(void *priv, unsigned int off,
|
|
void *val, size_t count)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = priv;
|
|
char *buf = val;
|
|
int err = 0;
|
|
int bits;
|
|
|
|
if (unlikely(off >= edev->size))
|
|
return 0;
|
|
if ((off + count) > edev->size)
|
|
count = edev->size - off;
|
|
if (unlikely(!count))
|
|
return count;
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
while (count) {
|
|
struct spi_message m;
|
|
struct spi_transfer t[2] = { { 0 } };
|
|
u16 cmd_addr = OP_READ << edev->addrlen;
|
|
size_t nbytes = count;
|
|
|
|
if (edev->pdata->flags & EE_ADDR8) {
|
|
cmd_addr |= off;
|
|
if (has_quirk_single_word_read(edev))
|
|
nbytes = 1;
|
|
} else {
|
|
cmd_addr |= (off >> 1);
|
|
if (has_quirk_single_word_read(edev))
|
|
nbytes = 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
|
|
cmd_addr, edev->spi->max_speed_hz);
|
|
|
|
if (has_quirk_extra_read_cycle(edev)) {
|
|
cmd_addr <<= 1;
|
|
bits += 1;
|
|
}
|
|
|
|
spi_message_init(&m);
|
|
|
|
t[0].tx_buf = (char *)&cmd_addr;
|
|
t[0].len = 2;
|
|
t[0].bits_per_word = bits;
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
t[1].rx_buf = buf;
|
|
t[1].len = count;
|
|
t[1].bits_per_word = 8;
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
err = spi_sync(edev->spi, &m);
|
|
/* have to wait at least Tcsl ns */
|
|
ndelay(250);
|
|
|
|
if (err) {
|
|
dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
|
|
nbytes, (int)off, err);
|
|
break;
|
|
}
|
|
|
|
buf += nbytes;
|
|
off += nbytes;
|
|
count -= nbytes;
|
|
}
|
|
|
|
if (edev->pdata->finish)
|
|
edev->pdata->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
|
|
{
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
int bits, ret;
|
|
u16 cmd_addr;
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
cmd_addr = OP_START << edev->addrlen;
|
|
if (edev->pdata->flags & EE_ADDR8)
|
|
cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1;
|
|
else
|
|
cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS);
|
|
|
|
if (has_quirk_instruction_length(edev)) {
|
|
cmd_addr <<= 2;
|
|
bits += 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "ew%s cmd 0x%04x, %d bits\n",
|
|
is_on ? "en" : "ds", cmd_addr, bits);
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(t));
|
|
|
|
t.tx_buf = &cmd_addr;
|
|
t.len = 2;
|
|
t.bits_per_word = bits;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
ret = spi_sync(edev->spi, &m);
|
|
/* have to wait at least Tcsl ns */
|
|
ndelay(250);
|
|
if (ret)
|
|
dev_err(&edev->spi->dev, "erase/write %sable error %d\n",
|
|
is_on ? "en" : "dis", ret);
|
|
|
|
if (edev->pdata->finish)
|
|
edev->pdata->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t
|
|
eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
|
|
const char *buf, unsigned off)
|
|
{
|
|
struct spi_message m;
|
|
struct spi_transfer t[2];
|
|
int bits, data_len, ret;
|
|
u16 cmd_addr;
|
|
|
|
if (unlikely(off >= edev->size))
|
|
return -EINVAL;
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
cmd_addr = OP_WRITE << edev->addrlen;
|
|
|
|
if (edev->pdata->flags & EE_ADDR8) {
|
|
cmd_addr |= off;
|
|
data_len = 1;
|
|
} else {
|
|
cmd_addr |= (off >> 1);
|
|
data_len = 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr);
|
|
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
|
|
t[0].tx_buf = (char *)&cmd_addr;
|
|
t[0].len = 2;
|
|
t[0].bits_per_word = bits;
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
t[1].tx_buf = buf;
|
|
t[1].len = data_len;
|
|
t[1].bits_per_word = 8;
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
ret = spi_sync(edev->spi, &m);
|
|
/* have to wait program cycle time Twc ms */
|
|
mdelay(6);
|
|
return ret;
|
|
}
|
|
|
|
static int eeprom_93xx46_write(void *priv, unsigned int off,
|
|
void *val, size_t count)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = priv;
|
|
char *buf = val;
|
|
int i, ret, step = 1;
|
|
|
|
if (unlikely(off >= edev->size))
|
|
return -EFBIG;
|
|
if ((off + count) > edev->size)
|
|
count = edev->size - off;
|
|
if (unlikely(!count))
|
|
return count;
|
|
|
|
/* only write even number of bytes on 16-bit devices */
|
|
if (edev->pdata->flags & EE_ADDR16) {
|
|
step = 2;
|
|
count &= ~1;
|
|
}
|
|
|
|
/* erase/write enable */
|
|
ret = eeprom_93xx46_ew(edev, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
for (i = 0; i < count; i += step) {
|
|
ret = eeprom_93xx46_write_word(edev, &buf[i], off + i);
|
|
if (ret) {
|
|
dev_err(&edev->spi->dev, "write failed at %d: %d\n",
|
|
(int)off + i, ret);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (edev->pdata->finish)
|
|
edev->pdata->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
|
|
/* erase/write disable */
|
|
eeprom_93xx46_ew(edev, 0);
|
|
return ret;
|
|
}
|
|
|
|
static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
struct eeprom_93xx46_platform_data *pd = edev->pdata;
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
int bits, ret;
|
|
u16 cmd_addr;
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
cmd_addr = OP_START << edev->addrlen;
|
|
if (edev->pdata->flags & EE_ADDR8)
|
|
cmd_addr |= ADDR_ERAL << 1;
|
|
else
|
|
cmd_addr |= ADDR_ERAL;
|
|
|
|
if (has_quirk_instruction_length(edev)) {
|
|
cmd_addr <<= 2;
|
|
bits += 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "eral cmd 0x%04x, %d bits\n", cmd_addr, bits);
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(t));
|
|
|
|
t.tx_buf = &cmd_addr;
|
|
t.len = 2;
|
|
t.bits_per_word = bits;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
ret = spi_sync(edev->spi, &m);
|
|
if (ret)
|
|
dev_err(&edev->spi->dev, "erase error %d\n", ret);
|
|
/* have to wait erase cycle time Tec ms */
|
|
mdelay(6);
|
|
|
|
if (pd->finish)
|
|
pd->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t eeprom_93xx46_store_erase(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev);
|
|
int erase = 0, ret;
|
|
|
|
sscanf(buf, "%d", &erase);
|
|
if (erase) {
|
|
ret = eeprom_93xx46_ew(edev, 1);
|
|
if (ret)
|
|
return ret;
|
|
ret = eeprom_93xx46_eral(edev);
|
|
if (ret)
|
|
return ret;
|
|
ret = eeprom_93xx46_ew(edev, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
|
|
|
|
static void select_assert(void *context)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = context;
|
|
|
|
gpiod_set_value_cansleep(edev->pdata->select, 1);
|
|
}
|
|
|
|
static void select_deassert(void *context)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = context;
|
|
|
|
gpiod_set_value_cansleep(edev->pdata->select, 0);
|
|
}
|
|
|
|
static const struct of_device_id eeprom_93xx46_of_table[] = {
|
|
{ .compatible = "eeprom-93xx46", .data = &at93c46_data, },
|
|
{ .compatible = "atmel,at93c46", .data = &at93c46_data, },
|
|
{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
|
|
{ .compatible = "atmel,at93c56", .data = &at93c56_data, },
|
|
{ .compatible = "atmel,at93c66", .data = &at93c66_data, },
|
|
{ .compatible = "microchip,93lc46b", .data = µchip_93lc46b_data, },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
|
|
|
|
static const struct spi_device_id eeprom_93xx46_spi_ids[] = {
|
|
{ .name = "eeprom-93xx46",
|
|
.driver_data = (kernel_ulong_t)&at93c46_data, },
|
|
{ .name = "at93c46",
|
|
.driver_data = (kernel_ulong_t)&at93c46_data, },
|
|
{ .name = "at93c46d",
|
|
.driver_data = (kernel_ulong_t)&atmel_at93c46d_data, },
|
|
{ .name = "at93c56",
|
|
.driver_data = (kernel_ulong_t)&at93c56_data, },
|
|
{ .name = "at93c66",
|
|
.driver_data = (kernel_ulong_t)&at93c66_data, },
|
|
{ .name = "93lc46b",
|
|
.driver_data = (kernel_ulong_t)µchip_93lc46b_data, },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, eeprom_93xx46_spi_ids);
|
|
|
|
static int eeprom_93xx46_probe_dt(struct spi_device *spi)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(eeprom_93xx46_of_table, &spi->dev);
|
|
struct device_node *np = spi->dev.of_node;
|
|
struct eeprom_93xx46_platform_data *pd;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL);
|
|
if (!pd)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32(np, "data-size", &tmp);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "data-size property not found\n");
|
|
return ret;
|
|
}
|
|
|
|
if (tmp == 8) {
|
|
pd->flags |= EE_ADDR8;
|
|
} else if (tmp == 16) {
|
|
pd->flags |= EE_ADDR16;
|
|
} else {
|
|
dev_err(&spi->dev, "invalid data-size (%d)\n", tmp);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "read-only"))
|
|
pd->flags |= EE_READONLY;
|
|
|
|
pd->select = devm_gpiod_get_optional(&spi->dev, "select",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(pd->select))
|
|
return PTR_ERR(pd->select);
|
|
|
|
pd->prepare = select_assert;
|
|
pd->finish = select_deassert;
|
|
gpiod_direction_output(pd->select, 0);
|
|
|
|
if (of_id->data) {
|
|
const struct eeprom_93xx46_devtype_data *data = of_id->data;
|
|
|
|
pd->quirks = data->quirks;
|
|
pd->flags |= data->flags;
|
|
}
|
|
|
|
spi->dev.platform_data = pd;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int eeprom_93xx46_probe(struct spi_device *spi)
|
|
{
|
|
struct eeprom_93xx46_platform_data *pd;
|
|
struct eeprom_93xx46_dev *edev;
|
|
int err;
|
|
|
|
if (spi->dev.of_node) {
|
|
err = eeprom_93xx46_probe_dt(spi);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
pd = spi->dev.platform_data;
|
|
if (!pd) {
|
|
dev_err(&spi->dev, "missing platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
edev = devm_kzalloc(&spi->dev, sizeof(*edev), GFP_KERNEL);
|
|
if (!edev)
|
|
return -ENOMEM;
|
|
|
|
if (pd->flags & EE_SIZE1K)
|
|
edev->size = 128;
|
|
else if (pd->flags & EE_SIZE2K)
|
|
edev->size = 256;
|
|
else if (pd->flags & EE_SIZE4K)
|
|
edev->size = 512;
|
|
else {
|
|
dev_err(&spi->dev, "unspecified size\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pd->flags & EE_ADDR8)
|
|
edev->addrlen = ilog2(edev->size);
|
|
else if (pd->flags & EE_ADDR16)
|
|
edev->addrlen = ilog2(edev->size) - 1;
|
|
else {
|
|
dev_err(&spi->dev, "unspecified address type\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_init(&edev->lock);
|
|
|
|
edev->spi = spi;
|
|
edev->pdata = pd;
|
|
|
|
edev->nvmem_config.type = NVMEM_TYPE_EEPROM;
|
|
edev->nvmem_config.name = dev_name(&spi->dev);
|
|
edev->nvmem_config.dev = &spi->dev;
|
|
edev->nvmem_config.read_only = pd->flags & EE_READONLY;
|
|
edev->nvmem_config.root_only = true;
|
|
edev->nvmem_config.owner = THIS_MODULE;
|
|
edev->nvmem_config.compat = true;
|
|
edev->nvmem_config.base_dev = &spi->dev;
|
|
edev->nvmem_config.reg_read = eeprom_93xx46_read;
|
|
edev->nvmem_config.reg_write = eeprom_93xx46_write;
|
|
edev->nvmem_config.priv = edev;
|
|
edev->nvmem_config.stride = 4;
|
|
edev->nvmem_config.word_size = 1;
|
|
edev->nvmem_config.size = edev->size;
|
|
|
|
edev->nvmem = devm_nvmem_register(&spi->dev, &edev->nvmem_config);
|
|
if (IS_ERR(edev->nvmem))
|
|
return PTR_ERR(edev->nvmem);
|
|
|
|
dev_info(&spi->dev, "%d-bit eeprom containing %d bytes %s\n",
|
|
(pd->flags & EE_ADDR8) ? 8 : 16,
|
|
edev->size,
|
|
(pd->flags & EE_READONLY) ? "(readonly)" : "");
|
|
|
|
if (!(pd->flags & EE_READONLY)) {
|
|
if (device_create_file(&spi->dev, &dev_attr_erase))
|
|
dev_err(&spi->dev, "can't create erase interface\n");
|
|
}
|
|
|
|
spi_set_drvdata(spi, edev);
|
|
return 0;
|
|
}
|
|
|
|
static void eeprom_93xx46_remove(struct spi_device *spi)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi);
|
|
|
|
if (!(edev->pdata->flags & EE_READONLY))
|
|
device_remove_file(&spi->dev, &dev_attr_erase);
|
|
}
|
|
|
|
static struct spi_driver eeprom_93xx46_driver = {
|
|
.driver = {
|
|
.name = "93xx46",
|
|
.of_match_table = of_match_ptr(eeprom_93xx46_of_table),
|
|
},
|
|
.probe = eeprom_93xx46_probe,
|
|
.remove = eeprom_93xx46_remove,
|
|
.id_table = eeprom_93xx46_spi_ids,
|
|
};
|
|
|
|
module_spi_driver(eeprom_93xx46_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
|
|
MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
|
|
MODULE_ALIAS("spi:93xx46");
|
|
MODULE_ALIAS("spi:eeprom-93xx46");
|
|
MODULE_ALIAS("spi:93lc46b");
|