forked from Minki/linux
f9566265d7
o TSS/RSS ring validation does not take into account that either
of these ring values can be 0. This patch fixes this validation
and would fail set_channel operation if any of these ring value
is 0. This regression was added as part of commit id
34e8c406fd ("qlcnic: refactor Tx/SDS
ring calculation and validation in driver.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2344 lines
58 KiB
C
2344 lines
58 KiB
C
/*
|
|
* QLogic qlcnic NIC Driver
|
|
* Copyright (c) 2009-2013 QLogic Corporation
|
|
*
|
|
* See LICENSE.qlcnic for copyright and licensing details.
|
|
*/
|
|
|
|
#include "qlcnic_sriov.h"
|
|
#include "qlcnic.h"
|
|
#include "qlcnic_hw.h"
|
|
|
|
/* Reset template definitions */
|
|
#define QLC_83XX_RESTART_TEMPLATE_SIZE 0x2000
|
|
#define QLC_83XX_RESET_TEMPLATE_ADDR 0x4F0000
|
|
#define QLC_83XX_RESET_SEQ_VERSION 0x0101
|
|
|
|
#define QLC_83XX_OPCODE_NOP 0x0000
|
|
#define QLC_83XX_OPCODE_WRITE_LIST 0x0001
|
|
#define QLC_83XX_OPCODE_READ_WRITE_LIST 0x0002
|
|
#define QLC_83XX_OPCODE_POLL_LIST 0x0004
|
|
#define QLC_83XX_OPCODE_POLL_WRITE_LIST 0x0008
|
|
#define QLC_83XX_OPCODE_READ_MODIFY_WRITE 0x0010
|
|
#define QLC_83XX_OPCODE_SEQ_PAUSE 0x0020
|
|
#define QLC_83XX_OPCODE_SEQ_END 0x0040
|
|
#define QLC_83XX_OPCODE_TMPL_END 0x0080
|
|
#define QLC_83XX_OPCODE_POLL_READ_LIST 0x0100
|
|
|
|
/* EPORT control registers */
|
|
#define QLC_83XX_RESET_CONTROL 0x28084E50
|
|
#define QLC_83XX_RESET_REG 0x28084E60
|
|
#define QLC_83XX_RESET_PORT0 0x28084E70
|
|
#define QLC_83XX_RESET_PORT1 0x28084E80
|
|
#define QLC_83XX_RESET_PORT2 0x28084E90
|
|
#define QLC_83XX_RESET_PORT3 0x28084EA0
|
|
#define QLC_83XX_RESET_SRESHIM 0x28084EB0
|
|
#define QLC_83XX_RESET_EPGSHIM 0x28084EC0
|
|
#define QLC_83XX_RESET_ETHERPCS 0x28084ED0
|
|
|
|
static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter);
|
|
static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev);
|
|
static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter);
|
|
|
|
/* Template header */
|
|
struct qlc_83xx_reset_hdr {
|
|
#if defined(__LITTLE_ENDIAN)
|
|
u16 version;
|
|
u16 signature;
|
|
u16 size;
|
|
u16 entries;
|
|
u16 hdr_size;
|
|
u16 checksum;
|
|
u16 init_offset;
|
|
u16 start_offset;
|
|
#elif defined(__BIG_ENDIAN)
|
|
u16 signature;
|
|
u16 version;
|
|
u16 entries;
|
|
u16 size;
|
|
u16 checksum;
|
|
u16 hdr_size;
|
|
u16 start_offset;
|
|
u16 init_offset;
|
|
#endif
|
|
} __packed;
|
|
|
|
/* Command entry header. */
|
|
struct qlc_83xx_entry_hdr {
|
|
#if defined(__LITTLE_ENDIAN)
|
|
u16 cmd;
|
|
u16 size;
|
|
u16 count;
|
|
u16 delay;
|
|
#elif defined(__BIG_ENDIAN)
|
|
u16 size;
|
|
u16 cmd;
|
|
u16 delay;
|
|
u16 count;
|
|
#endif
|
|
} __packed;
|
|
|
|
/* Generic poll command */
|
|
struct qlc_83xx_poll {
|
|
u32 mask;
|
|
u32 status;
|
|
} __packed;
|
|
|
|
/* Read modify write command */
|
|
struct qlc_83xx_rmw {
|
|
u32 mask;
|
|
u32 xor_value;
|
|
u32 or_value;
|
|
#if defined(__LITTLE_ENDIAN)
|
|
u8 shl;
|
|
u8 shr;
|
|
u8 index_a;
|
|
u8 rsvd;
|
|
#elif defined(__BIG_ENDIAN)
|
|
u8 rsvd;
|
|
u8 index_a;
|
|
u8 shr;
|
|
u8 shl;
|
|
#endif
|
|
} __packed;
|
|
|
|
/* Generic command with 2 DWORD */
|
|
struct qlc_83xx_entry {
|
|
u32 arg1;
|
|
u32 arg2;
|
|
} __packed;
|
|
|
|
/* Generic command with 4 DWORD */
|
|
struct qlc_83xx_quad_entry {
|
|
u32 dr_addr;
|
|
u32 dr_value;
|
|
u32 ar_addr;
|
|
u32 ar_value;
|
|
} __packed;
|
|
static const char *const qlc_83xx_idc_states[] = {
|
|
"Unknown",
|
|
"Cold",
|
|
"Init",
|
|
"Ready",
|
|
"Need Reset",
|
|
"Need Quiesce",
|
|
"Failed",
|
|
"Quiesce"
|
|
};
|
|
|
|
static int
|
|
qlcnic_83xx_idc_check_driver_presence_reg(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 val;
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE);
|
|
if ((val & 0xFFFF))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static void qlcnic_83xx_idc_log_state_history(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 cur, prev;
|
|
cur = adapter->ahw->idc.curr_state;
|
|
prev = adapter->ahw->idc.prev_state;
|
|
|
|
dev_info(&adapter->pdev->dev,
|
|
"current state = %s, prev state = %s\n",
|
|
adapter->ahw->idc.name[cur],
|
|
adapter->ahw->idc.name[prev]);
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_update_audit_reg(struct qlcnic_adapter *adapter,
|
|
u8 mode, int lock)
|
|
{
|
|
u32 val;
|
|
int seconds;
|
|
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT);
|
|
val |= (adapter->portnum & 0xf);
|
|
val |= mode << 7;
|
|
if (mode)
|
|
seconds = jiffies / HZ - adapter->ahw->idc.sec_counter;
|
|
else
|
|
seconds = jiffies / HZ;
|
|
|
|
val |= seconds << 8;
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT, val);
|
|
adapter->ahw->idc.sec_counter = jiffies / HZ;
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qlcnic_83xx_idc_update_minor_version(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 val;
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MIN_VERSION);
|
|
val = val & ~(0x3 << (adapter->portnum * 2));
|
|
val = val | (QLC_83XX_IDC_MINOR_VERSION << (adapter->portnum * 2));
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_MIN_VERSION, val);
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_update_major_version(struct qlcnic_adapter *adapter,
|
|
int lock)
|
|
{
|
|
u32 val;
|
|
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION);
|
|
val = val & ~0xFF;
|
|
val = val | QLC_83XX_IDC_MAJOR_VERSION;
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION, val);
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qlcnic_83xx_idc_update_drv_presence_reg(struct qlcnic_adapter *adapter,
|
|
int status, int lock)
|
|
{
|
|
u32 val;
|
|
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE);
|
|
|
|
if (status)
|
|
val = val | (1 << adapter->portnum);
|
|
else
|
|
val = val & ~(1 << adapter->portnum);
|
|
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val);
|
|
qlcnic_83xx_idc_update_minor_version(adapter);
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_check_major_version(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 val;
|
|
u8 version;
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION);
|
|
version = val & 0xFF;
|
|
|
|
if (version != QLC_83XX_IDC_MAJOR_VERSION) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s:mismatch. version 0x%x, expected version 0x%x\n",
|
|
__func__, version, QLC_83XX_IDC_MAJOR_VERSION);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_clear_registers(struct qlcnic_adapter *adapter,
|
|
int lock)
|
|
{
|
|
u32 val;
|
|
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_ACK, 0);
|
|
/* Clear gracefull reset bit */
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
|
|
val &= ~QLC_83XX_IDC_GRACEFULL_RESET;
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val);
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_update_drv_ack_reg(struct qlcnic_adapter *adapter,
|
|
int flag, int lock)
|
|
{
|
|
u32 val;
|
|
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_ACK);
|
|
if (flag)
|
|
val = val | (1 << adapter->portnum);
|
|
else
|
|
val = val & ~(1 << adapter->portnum);
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_ACK, val);
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_check_timeout(struct qlcnic_adapter *adapter,
|
|
int time_limit)
|
|
{
|
|
u64 seconds;
|
|
|
|
seconds = jiffies / HZ - adapter->ahw->idc.sec_counter;
|
|
if (seconds <= time_limit)
|
|
return 0;
|
|
else
|
|
return -EBUSY;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_check_reset_ack_reg
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Check ACK wait limit and clear the functions which failed to ACK
|
|
*
|
|
* Return 0 if all functions have acknowledged the reset request.
|
|
**/
|
|
static int qlcnic_83xx_idc_check_reset_ack_reg(struct qlcnic_adapter *adapter)
|
|
{
|
|
int timeout;
|
|
u32 ack, presence, val;
|
|
|
|
timeout = QLC_83XX_IDC_RESET_TIMEOUT_SECS;
|
|
ack = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_ACK);
|
|
presence = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE);
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s: ack = 0x%x, presence = 0x%x\n", __func__, ack, presence);
|
|
if (!((ack & presence) == presence)) {
|
|
if (qlcnic_83xx_idc_check_timeout(adapter, timeout)) {
|
|
/* Clear functions which failed to ACK */
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s: ACK wait exceeds time limit\n", __func__);
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE);
|
|
val = val & ~(ack ^ presence);
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val);
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s: updated drv presence reg = 0x%x\n",
|
|
__func__, val);
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
return 0;
|
|
|
|
} else {
|
|
return 1;
|
|
}
|
|
} else {
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s: Reset ACK received from all functions\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_tx_soft_reset
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Handle context deletion and recreation request from transmit routine
|
|
*
|
|
* Returns -EBUSY or Success (0)
|
|
*
|
|
**/
|
|
static int qlcnic_83xx_idc_tx_soft_reset(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
|
|
return -EBUSY;
|
|
|
|
netif_device_detach(netdev);
|
|
qlcnic_down(adapter, netdev);
|
|
qlcnic_up(adapter, netdev);
|
|
netif_device_attach(netdev);
|
|
clear_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
dev_err(&adapter->pdev->dev, "%s:\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_detach_driver
|
|
*
|
|
* @adapter: adapter structure
|
|
* Detach net interface, stop TX and cleanup resources before the HW reset.
|
|
* Returns: None
|
|
*
|
|
**/
|
|
static void qlcnic_83xx_idc_detach_driver(struct qlcnic_adapter *adapter)
|
|
{
|
|
int i;
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
netif_device_detach(netdev);
|
|
qlcnic_83xx_detach_mailbox_work(adapter);
|
|
|
|
/* Disable mailbox interrupt */
|
|
qlcnic_83xx_disable_mbx_intr(adapter);
|
|
qlcnic_down(adapter, netdev);
|
|
for (i = 0; i < adapter->ahw->num_msix; i++) {
|
|
adapter->ahw->intr_tbl[i].id = i;
|
|
adapter->ahw->intr_tbl[i].enabled = 0;
|
|
adapter->ahw->intr_tbl[i].src = 0;
|
|
}
|
|
|
|
if (qlcnic_sriov_pf_check(adapter))
|
|
qlcnic_sriov_pf_reset(adapter);
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_attach_driver
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Re-attach and re-enable net interface
|
|
* Returns: None
|
|
*
|
|
**/
|
|
static void qlcnic_83xx_idc_attach_driver(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
if (netif_running(netdev)) {
|
|
if (qlcnic_up(adapter, netdev))
|
|
goto done;
|
|
qlcnic_restore_indev_addr(netdev, NETDEV_UP);
|
|
}
|
|
done:
|
|
netif_device_attach(netdev);
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_enter_failed_state(struct qlcnic_adapter *adapter,
|
|
int lock)
|
|
{
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
qlcnic_83xx_idc_clear_registers(adapter, 0);
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_FAILED);
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
qlcnic_83xx_idc_log_state_history(adapter);
|
|
dev_info(&adapter->pdev->dev, "Device will enter failed state\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_enter_init_state(struct qlcnic_adapter *adapter,
|
|
int lock)
|
|
{
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_INIT);
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_enter_need_quiesce(struct qlcnic_adapter *adapter,
|
|
int lock)
|
|
{
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE,
|
|
QLC_83XX_IDC_DEV_NEED_QUISCENT);
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qlcnic_83xx_idc_enter_need_reset_state(struct qlcnic_adapter *adapter, int lock)
|
|
{
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE,
|
|
QLC_83XX_IDC_DEV_NEED_RESET);
|
|
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_enter_ready_state(struct qlcnic_adapter *adapter,
|
|
int lock)
|
|
{
|
|
if (lock) {
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EBUSY;
|
|
}
|
|
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_READY);
|
|
if (lock)
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_find_reset_owner_id
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* NIC gets precedence over ISCSI and ISCSI has precedence over FCOE.
|
|
* Within the same class, function with lowest PCI ID assumes ownership
|
|
*
|
|
* Returns: reset owner id or failure indication (-EIO)
|
|
*
|
|
**/
|
|
static int qlcnic_83xx_idc_find_reset_owner_id(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 reg, reg1, reg2, i, j, owner, class;
|
|
|
|
reg1 = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_PARTITION_INFO_1);
|
|
reg2 = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_PARTITION_INFO_2);
|
|
owner = QLCNIC_TYPE_NIC;
|
|
i = 0;
|
|
j = 0;
|
|
reg = reg1;
|
|
|
|
do {
|
|
class = (((reg & (0xF << j * 4)) >> j * 4) & 0x3);
|
|
if (class == owner)
|
|
break;
|
|
if (i == (QLC_83XX_IDC_MAX_FUNC_PER_PARTITION_INFO - 1)) {
|
|
reg = reg2;
|
|
j = 0;
|
|
} else {
|
|
j++;
|
|
}
|
|
|
|
if (i == (QLC_83XX_IDC_MAX_CNA_FUNCTIONS - 1)) {
|
|
if (owner == QLCNIC_TYPE_NIC)
|
|
owner = QLCNIC_TYPE_ISCSI;
|
|
else if (owner == QLCNIC_TYPE_ISCSI)
|
|
owner = QLCNIC_TYPE_FCOE;
|
|
else if (owner == QLCNIC_TYPE_FCOE)
|
|
return -EIO;
|
|
reg = reg1;
|
|
j = 0;
|
|
i = 0;
|
|
}
|
|
} while (i++ < QLC_83XX_IDC_MAX_CNA_FUNCTIONS);
|
|
|
|
return i;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_restart_hw(struct qlcnic_adapter *adapter, int lock)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = qlcnic_83xx_restart_hw(adapter);
|
|
|
|
if (ret) {
|
|
qlcnic_83xx_idc_enter_failed_state(adapter, lock);
|
|
} else {
|
|
qlcnic_83xx_idc_clear_registers(adapter, lock);
|
|
ret = qlcnic_83xx_idc_enter_ready_state(adapter, lock);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_check_fan_failure(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 status;
|
|
|
|
status = QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_HALT_STATUS1);
|
|
|
|
if (status & QLCNIC_RCODE_FATAL_ERROR) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"peg halt status1=0x%x\n", status);
|
|
if (QLCNIC_FWERROR_CODE(status) == QLCNIC_FWERROR_FAN_FAILURE) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"On board active cooling fan failed. "
|
|
"Device has been halted.\n");
|
|
dev_err(&adapter->pdev->dev,
|
|
"Replace the adapter.\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter)
|
|
{
|
|
int err;
|
|
|
|
qlcnic_83xx_reinit_mbx_work(adapter->ahw->mailbox);
|
|
qlcnic_83xx_enable_mbx_interrupt(adapter);
|
|
|
|
/* register for NIC IDC AEN Events */
|
|
qlcnic_83xx_register_nic_idc_func(adapter, 1);
|
|
|
|
err = qlcnic_sriov_pf_reinit(adapter);
|
|
if (err)
|
|
return err;
|
|
|
|
qlcnic_83xx_enable_mbx_interrupt(adapter);
|
|
|
|
if (qlcnic_83xx_configure_opmode(adapter)) {
|
|
qlcnic_83xx_idc_enter_failed_state(adapter, 1);
|
|
return -EIO;
|
|
}
|
|
|
|
if (adapter->nic_ops->init_driver(adapter)) {
|
|
qlcnic_83xx_idc_enter_failed_state(adapter, 1);
|
|
return -EIO;
|
|
}
|
|
|
|
if (adapter->portnum == 0)
|
|
qlcnic_set_drv_version(adapter);
|
|
|
|
qlcnic_dcb_get_info(adapter->dcb);
|
|
qlcnic_83xx_idc_attach_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qlcnic_83xx_idc_update_idc_params(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
|
|
qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 1);
|
|
qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1);
|
|
set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status);
|
|
|
|
ahw->idc.quiesce_req = 0;
|
|
ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY;
|
|
ahw->idc.err_code = 0;
|
|
ahw->idc.collect_dump = 0;
|
|
ahw->reset_context = 0;
|
|
adapter->tx_timeo_cnt = 0;
|
|
ahw->idc.delay_reset = 0;
|
|
|
|
clear_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_ready_state_entry
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Perform ready state initialization, this routine will get invoked only
|
|
* once from READY state.
|
|
*
|
|
* Returns: Error code or Success(0)
|
|
*
|
|
**/
|
|
int qlcnic_83xx_idc_ready_state_entry(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
|
|
if (ahw->idc.prev_state != QLC_83XX_IDC_DEV_READY) {
|
|
qlcnic_83xx_idc_update_idc_params(adapter);
|
|
/* Re-attach the device if required */
|
|
if ((ahw->idc.prev_state == QLC_83XX_IDC_DEV_NEED_RESET) ||
|
|
(ahw->idc.prev_state == QLC_83XX_IDC_DEV_INIT)) {
|
|
if (qlcnic_83xx_idc_reattach_driver(adapter))
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_vnic_pf_entry
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Ensure vNIC mode privileged function starts only after vNIC mode is
|
|
* enabled by management function.
|
|
* If vNIC mode is ready, start initialization.
|
|
*
|
|
* Returns: -EIO or 0
|
|
*
|
|
**/
|
|
int qlcnic_83xx_idc_vnic_pf_entry(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 state;
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
|
|
/* Privileged function waits till mgmt function enables VNIC mode */
|
|
state = QLCRDX(adapter->ahw, QLC_83XX_VNIC_STATE);
|
|
if (state != QLCNIC_DEV_NPAR_OPER) {
|
|
if (!ahw->idc.vnic_wait_limit--) {
|
|
qlcnic_83xx_idc_enter_failed_state(adapter, 1);
|
|
return -EIO;
|
|
}
|
|
dev_info(&adapter->pdev->dev, "vNIC mode disabled\n");
|
|
return -EIO;
|
|
|
|
} else {
|
|
/* Perform one time initialization from ready state */
|
|
if (ahw->idc.vnic_state != QLCNIC_DEV_NPAR_OPER) {
|
|
qlcnic_83xx_idc_update_idc_params(adapter);
|
|
|
|
/* If the previous state is UNKNOWN, device will be
|
|
already attached properly by Init routine*/
|
|
if (ahw->idc.prev_state != QLC_83XX_IDC_DEV_UNKNOWN) {
|
|
if (qlcnic_83xx_idc_reattach_driver(adapter))
|
|
return -EIO;
|
|
}
|
|
adapter->ahw->idc.vnic_state = QLCNIC_DEV_NPAR_OPER;
|
|
dev_info(&adapter->pdev->dev, "vNIC mode enabled\n");
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter)
|
|
{
|
|
adapter->ahw->idc.err_code = -EIO;
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s: Device in unknown state\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_cold_state
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* If HW is up and running device will enter READY state.
|
|
* If firmware image from host needs to be loaded, device is
|
|
* forced to start with the file firmware image.
|
|
*
|
|
* Returns: Error code or Success(0)
|
|
*
|
|
**/
|
|
static int qlcnic_83xx_idc_cold_state_handler(struct qlcnic_adapter *adapter)
|
|
{
|
|
qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 0);
|
|
qlcnic_83xx_idc_update_audit_reg(adapter, 1, 0);
|
|
|
|
if (qlcnic_load_fw_file) {
|
|
qlcnic_83xx_idc_restart_hw(adapter, 0);
|
|
} else {
|
|
if (qlcnic_83xx_check_hw_status(adapter)) {
|
|
qlcnic_83xx_idc_enter_failed_state(adapter, 0);
|
|
return -EIO;
|
|
} else {
|
|
qlcnic_83xx_idc_enter_ready_state(adapter, 0);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_init_state
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Reset owner will restart the device from this state.
|
|
* Device will enter failed state if it remains
|
|
* in this state for more than DEV_INIT time limit.
|
|
*
|
|
* Returns: Error code or Success(0)
|
|
*
|
|
**/
|
|
static int qlcnic_83xx_idc_init_state(struct qlcnic_adapter *adapter)
|
|
{
|
|
int timeout, ret = 0;
|
|
u32 owner;
|
|
|
|
timeout = QLC_83XX_IDC_INIT_TIMEOUT_SECS;
|
|
if (adapter->ahw->idc.prev_state == QLC_83XX_IDC_DEV_NEED_RESET) {
|
|
owner = qlcnic_83xx_idc_find_reset_owner_id(adapter);
|
|
if (adapter->ahw->pci_func == owner)
|
|
ret = qlcnic_83xx_idc_restart_hw(adapter, 1);
|
|
} else {
|
|
ret = qlcnic_83xx_idc_check_timeout(adapter, timeout);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_ready_state
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Perform IDC protocol specicifed actions after monitoring device state and
|
|
* events.
|
|
*
|
|
* Returns: Error code or Success(0)
|
|
*
|
|
**/
|
|
static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
struct qlcnic_mailbox *mbx = ahw->mailbox;
|
|
int ret = 0;
|
|
u32 owner;
|
|
u32 val;
|
|
|
|
/* Perform NIC configuration based ready state entry actions */
|
|
if (ahw->idc.state_entry(adapter))
|
|
return -EIO;
|
|
|
|
if (qlcnic_check_temp(adapter)) {
|
|
if (ahw->temp == QLCNIC_TEMP_PANIC) {
|
|
qlcnic_83xx_idc_check_fan_failure(adapter);
|
|
dev_err(&adapter->pdev->dev,
|
|
"Error: device temperature %d above limits\n",
|
|
adapter->ahw->temp);
|
|
clear_bit(QLC_83XX_MBX_READY, &mbx->status);
|
|
set_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
qlcnic_83xx_idc_detach_driver(adapter);
|
|
qlcnic_83xx_idc_enter_failed_state(adapter, 1);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
|
|
ret = qlcnic_83xx_check_heartbeat(adapter);
|
|
if (ret) {
|
|
adapter->flags |= QLCNIC_FW_HANG;
|
|
if (!(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) {
|
|
clear_bit(QLC_83XX_MBX_READY, &mbx->status);
|
|
set_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
qlcnic_83xx_idc_enter_need_reset_state(adapter, 1);
|
|
} else {
|
|
owner = qlcnic_83xx_idc_find_reset_owner_id(adapter);
|
|
if (ahw->pci_func == owner)
|
|
qlcnic_dump_fw(adapter);
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
if ((val & QLC_83XX_IDC_GRACEFULL_RESET) || ahw->idc.collect_dump) {
|
|
clear_bit(QLC_83XX_MBX_READY, &mbx->status);
|
|
|
|
/* Move to need reset state and prepare for reset */
|
|
qlcnic_83xx_idc_enter_need_reset_state(adapter, 1);
|
|
return ret;
|
|
}
|
|
|
|
/* Check for soft reset request */
|
|
if (ahw->reset_context &&
|
|
!(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) {
|
|
adapter->ahw->reset_context = 0;
|
|
qlcnic_83xx_idc_tx_soft_reset(adapter);
|
|
return ret;
|
|
}
|
|
|
|
/* Move to need quiesce state if requested */
|
|
if (adapter->ahw->idc.quiesce_req) {
|
|
qlcnic_83xx_idc_enter_need_quiesce(adapter, 1);
|
|
qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_need_reset_state
|
|
*
|
|
* @adapter: adapter structure
|
|
*
|
|
* Device will remain in this state until:
|
|
* Reset request ACK's are recieved from all the functions
|
|
* Wait time exceeds max time limit
|
|
*
|
|
* Returns: Error code or Success(0)
|
|
*
|
|
**/
|
|
static int qlcnic_83xx_idc_need_reset_state(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_mailbox *mbx = adapter->ahw->mailbox;
|
|
int ret = 0;
|
|
|
|
if (adapter->ahw->idc.prev_state != QLC_83XX_IDC_DEV_NEED_RESET) {
|
|
qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1);
|
|
set_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
clear_bit(QLC_83XX_MBX_READY, &mbx->status);
|
|
if (adapter->ahw->nic_mode == QLCNIC_VNIC_MODE)
|
|
qlcnic_83xx_disable_vnic_mode(adapter, 1);
|
|
|
|
if (qlcnic_check_diag_status(adapter)) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s: Wait for diag completion\n", __func__);
|
|
adapter->ahw->idc.delay_reset = 1;
|
|
return 0;
|
|
} else {
|
|
qlcnic_83xx_idc_update_drv_ack_reg(adapter, 1, 1);
|
|
qlcnic_83xx_idc_detach_driver(adapter);
|
|
}
|
|
}
|
|
|
|
if (qlcnic_check_diag_status(adapter)) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s: Wait for diag completion\n", __func__);
|
|
return -1;
|
|
} else {
|
|
if (adapter->ahw->idc.delay_reset) {
|
|
qlcnic_83xx_idc_update_drv_ack_reg(adapter, 1, 1);
|
|
qlcnic_83xx_idc_detach_driver(adapter);
|
|
adapter->ahw->idc.delay_reset = 0;
|
|
}
|
|
|
|
/* Check for ACK from other functions */
|
|
ret = qlcnic_83xx_idc_check_reset_ack_reg(adapter);
|
|
if (ret) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s: Waiting for reset ACK\n", __func__);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Transit to INIT state and restart the HW */
|
|
qlcnic_83xx_idc_enter_init_state(adapter, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter)
|
|
{
|
|
dev_err(&adapter->pdev->dev, "%s: TBD\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter)
|
|
{
|
|
dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__);
|
|
clear_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
adapter->ahw->idc.err_code = -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_quiesce_state(struct qlcnic_adapter *adapter)
|
|
{
|
|
dev_info(&adapter->pdev->dev, "%s: TBD\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_idc_check_state_validity(struct qlcnic_adapter *adapter,
|
|
u32 state)
|
|
{
|
|
u32 cur, prev, next;
|
|
|
|
cur = adapter->ahw->idc.curr_state;
|
|
prev = adapter->ahw->idc.prev_state;
|
|
next = state;
|
|
|
|
if ((next < QLC_83XX_IDC_DEV_COLD) ||
|
|
(next > QLC_83XX_IDC_DEV_QUISCENT)) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s: curr %d, prev %d, next state %d is invalid\n",
|
|
__func__, cur, prev, state);
|
|
return 1;
|
|
}
|
|
|
|
if ((cur == QLC_83XX_IDC_DEV_UNKNOWN) &&
|
|
(prev == QLC_83XX_IDC_DEV_UNKNOWN)) {
|
|
if ((next != QLC_83XX_IDC_DEV_COLD) &&
|
|
(next != QLC_83XX_IDC_DEV_READY)) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s: failed, cur %d prev %d next %d\n",
|
|
__func__, cur, prev, next);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
if (next == QLC_83XX_IDC_DEV_INIT) {
|
|
if ((prev != QLC_83XX_IDC_DEV_INIT) &&
|
|
(prev != QLC_83XX_IDC_DEV_COLD) &&
|
|
(prev != QLC_83XX_IDC_DEV_NEED_RESET)) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s: failed, cur %d prev %d next %d\n",
|
|
__func__, cur, prev, next);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qlcnic_83xx_periodic_tasks(struct qlcnic_adapter *adapter)
|
|
{
|
|
if (adapter->fhash.fnum)
|
|
qlcnic_prune_lb_filters(adapter);
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_idc_poll_dev_state
|
|
*
|
|
* @work: kernel work queue structure used to schedule the function
|
|
*
|
|
* Poll device state periodically and perform state specific
|
|
* actions defined by Inter Driver Communication (IDC) protocol.
|
|
*
|
|
* Returns: None
|
|
*
|
|
**/
|
|
void qlcnic_83xx_idc_poll_dev_state(struct work_struct *work)
|
|
{
|
|
struct qlcnic_adapter *adapter;
|
|
u32 state;
|
|
|
|
adapter = container_of(work, struct qlcnic_adapter, fw_work.work);
|
|
state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE);
|
|
|
|
if (qlcnic_83xx_idc_check_state_validity(adapter, state)) {
|
|
qlcnic_83xx_idc_log_state_history(adapter);
|
|
adapter->ahw->idc.curr_state = QLC_83XX_IDC_DEV_UNKNOWN;
|
|
} else {
|
|
adapter->ahw->idc.curr_state = state;
|
|
}
|
|
|
|
switch (adapter->ahw->idc.curr_state) {
|
|
case QLC_83XX_IDC_DEV_READY:
|
|
qlcnic_83xx_idc_ready_state(adapter);
|
|
break;
|
|
case QLC_83XX_IDC_DEV_NEED_RESET:
|
|
qlcnic_83xx_idc_need_reset_state(adapter);
|
|
break;
|
|
case QLC_83XX_IDC_DEV_NEED_QUISCENT:
|
|
qlcnic_83xx_idc_need_quiesce_state(adapter);
|
|
break;
|
|
case QLC_83XX_IDC_DEV_FAILED:
|
|
qlcnic_83xx_idc_failed_state(adapter);
|
|
return;
|
|
case QLC_83XX_IDC_DEV_INIT:
|
|
qlcnic_83xx_idc_init_state(adapter);
|
|
break;
|
|
case QLC_83XX_IDC_DEV_QUISCENT:
|
|
qlcnic_83xx_idc_quiesce_state(adapter);
|
|
break;
|
|
default:
|
|
qlcnic_83xx_idc_unknown_state(adapter);
|
|
return;
|
|
}
|
|
adapter->ahw->idc.prev_state = adapter->ahw->idc.curr_state;
|
|
qlcnic_83xx_periodic_tasks(adapter);
|
|
|
|
/* Do not reschedule if firmaware is in hanged state and auto
|
|
* recovery is disabled
|
|
*/
|
|
if ((adapter->flags & QLCNIC_FW_HANG) && !qlcnic_auto_fw_reset)
|
|
return;
|
|
|
|
/* Re-schedule the function */
|
|
if (test_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status))
|
|
qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state,
|
|
adapter->ahw->idc.delay);
|
|
}
|
|
|
|
static void qlcnic_83xx_setup_idc_parameters(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 idc_params, val;
|
|
|
|
if (qlcnic_83xx_lockless_flash_read32(adapter,
|
|
QLC_83XX_IDC_FLASH_PARAM_ADDR,
|
|
(u8 *)&idc_params, 1)) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s:failed to get IDC params from flash\n", __func__);
|
|
adapter->dev_init_timeo = QLC_83XX_IDC_INIT_TIMEOUT_SECS;
|
|
adapter->reset_ack_timeo = QLC_83XX_IDC_RESET_TIMEOUT_SECS;
|
|
} else {
|
|
adapter->dev_init_timeo = idc_params & 0xFFFF;
|
|
adapter->reset_ack_timeo = ((idc_params >> 16) & 0xFFFF);
|
|
}
|
|
|
|
adapter->ahw->idc.curr_state = QLC_83XX_IDC_DEV_UNKNOWN;
|
|
adapter->ahw->idc.prev_state = QLC_83XX_IDC_DEV_UNKNOWN;
|
|
adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY;
|
|
adapter->ahw->idc.err_code = 0;
|
|
adapter->ahw->idc.collect_dump = 0;
|
|
adapter->ahw->idc.name = (char **)qlc_83xx_idc_states;
|
|
|
|
clear_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status);
|
|
|
|
/* Check if reset recovery is disabled */
|
|
if (!qlcnic_auto_fw_reset) {
|
|
/* Propagate do not reset request to other functions */
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
|
|
val = val | QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY;
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val);
|
|
}
|
|
}
|
|
|
|
static int
|
|
qlcnic_83xx_idc_first_to_load_function_handler(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 state, val;
|
|
|
|
if (qlcnic_83xx_lock_driver(adapter))
|
|
return -EIO;
|
|
|
|
/* Clear driver lock register */
|
|
QLCWRX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK, 0);
|
|
if (qlcnic_83xx_idc_update_major_version(adapter, 0)) {
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
return -EIO;
|
|
}
|
|
|
|
state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE);
|
|
if (qlcnic_83xx_idc_check_state_validity(adapter, state)) {
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
return -EIO;
|
|
}
|
|
|
|
if (state != QLC_83XX_IDC_DEV_COLD && qlcnic_load_fw_file) {
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE,
|
|
QLC_83XX_IDC_DEV_COLD);
|
|
state = QLC_83XX_IDC_DEV_COLD;
|
|
}
|
|
|
|
adapter->ahw->idc.curr_state = state;
|
|
/* First to load function should cold boot the device */
|
|
if (state == QLC_83XX_IDC_DEV_COLD)
|
|
qlcnic_83xx_idc_cold_state_handler(adapter);
|
|
|
|
/* Check if reset recovery is enabled */
|
|
if (qlcnic_auto_fw_reset) {
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
|
|
val = val & ~QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY;
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val);
|
|
}
|
|
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int qlcnic_83xx_idc_init(struct qlcnic_adapter *adapter)
|
|
{
|
|
int ret = -EIO;
|
|
|
|
qlcnic_83xx_setup_idc_parameters(adapter);
|
|
|
|
if (qlcnic_83xx_get_reset_instruction_template(adapter))
|
|
return ret;
|
|
|
|
if (!qlcnic_83xx_idc_check_driver_presence_reg(adapter)) {
|
|
if (qlcnic_83xx_idc_first_to_load_function_handler(adapter))
|
|
return -EIO;
|
|
} else {
|
|
if (qlcnic_83xx_idc_check_major_version(adapter))
|
|
return -EIO;
|
|
}
|
|
|
|
qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void qlcnic_83xx_idc_exit(struct qlcnic_adapter *adapter)
|
|
{
|
|
int id;
|
|
u32 val;
|
|
|
|
while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
|
|
usleep_range(10000, 11000);
|
|
|
|
id = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID);
|
|
id = id & 0xFF;
|
|
|
|
if (id == adapter->portnum) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s: wait for lock recovery.. %d\n", __func__, id);
|
|
msleep(20);
|
|
id = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID);
|
|
id = id & 0xFF;
|
|
}
|
|
|
|
/* Clear driver presence bit */
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE);
|
|
val = val & ~(1 << adapter->portnum);
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val);
|
|
clear_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status);
|
|
clear_bit(__QLCNIC_RESETTING, &adapter->state);
|
|
|
|
cancel_delayed_work_sync(&adapter->fw_work);
|
|
}
|
|
|
|
void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *adapter, u32 key)
|
|
{
|
|
u32 val;
|
|
|
|
if (qlcnic_sriov_vf_check(adapter))
|
|
return;
|
|
|
|
if (qlcnic_83xx_lock_driver(adapter)) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s:failed, please retry\n", __func__);
|
|
return;
|
|
}
|
|
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
|
|
if ((val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) ||
|
|
!qlcnic_auto_fw_reset) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s:failed, device in non reset mode\n", __func__);
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
return;
|
|
}
|
|
|
|
if (key == QLCNIC_FORCE_FW_RESET) {
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
|
|
val = val | QLC_83XX_IDC_GRACEFULL_RESET;
|
|
QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val);
|
|
} else if (key == QLCNIC_FORCE_FW_DUMP_KEY) {
|
|
adapter->ahw->idc.collect_dump = 1;
|
|
}
|
|
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
return;
|
|
}
|
|
|
|
static int qlcnic_83xx_copy_bootloader(struct qlcnic_adapter *adapter)
|
|
{
|
|
u8 *p_cache;
|
|
u32 src, size;
|
|
u64 dest;
|
|
int ret = -EIO;
|
|
|
|
src = QLC_83XX_BOOTLOADER_FLASH_ADDR;
|
|
dest = QLCRDX(adapter->ahw, QLCNIC_BOOTLOADER_ADDR);
|
|
size = QLCRDX(adapter->ahw, QLCNIC_BOOTLOADER_SIZE);
|
|
|
|
/* alignment check */
|
|
if (size & 0xF)
|
|
size = (size + 16) & ~0xF;
|
|
|
|
p_cache = kzalloc(size, GFP_KERNEL);
|
|
if (p_cache == NULL)
|
|
return -ENOMEM;
|
|
|
|
ret = qlcnic_83xx_lockless_flash_read32(adapter, src, p_cache,
|
|
size / sizeof(u32));
|
|
if (ret) {
|
|
kfree(p_cache);
|
|
return ret;
|
|
}
|
|
/* 16 byte write to MS memory */
|
|
ret = qlcnic_83xx_ms_mem_write128(adapter, dest, (u32 *)p_cache,
|
|
size / 16);
|
|
if (ret) {
|
|
kfree(p_cache);
|
|
return ret;
|
|
}
|
|
kfree(p_cache);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qlcnic_83xx_copy_fw_file(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info;
|
|
const struct firmware *fw = fw_info->fw;
|
|
u32 dest, *p_cache;
|
|
int i, ret = -EIO;
|
|
u8 data[16];
|
|
size_t size;
|
|
u64 addr;
|
|
|
|
dest = QLCRDX(adapter->ahw, QLCNIC_FW_IMAGE_ADDR);
|
|
size = (fw->size & ~0xF);
|
|
p_cache = (u32 *)fw->data;
|
|
addr = (u64)dest;
|
|
|
|
ret = qlcnic_83xx_ms_mem_write128(adapter, addr,
|
|
(u32 *)p_cache, size / 16);
|
|
if (ret) {
|
|
dev_err(&adapter->pdev->dev, "MS memory write failed\n");
|
|
release_firmware(fw);
|
|
fw_info->fw = NULL;
|
|
return -EIO;
|
|
}
|
|
|
|
/* alignment check */
|
|
if (fw->size & 0xF) {
|
|
addr = dest + size;
|
|
for (i = 0; i < (fw->size & 0xF); i++)
|
|
data[i] = fw->data[size + i];
|
|
for (; i < 16; i++)
|
|
data[i] = 0;
|
|
ret = qlcnic_83xx_ms_mem_write128(adapter, addr,
|
|
(u32 *)data, 1);
|
|
if (ret) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"MS memory write failed\n");
|
|
release_firmware(fw);
|
|
fw_info->fw = NULL;
|
|
return -EIO;
|
|
}
|
|
}
|
|
release_firmware(fw);
|
|
fw_info->fw = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter)
|
|
{
|
|
int i, j;
|
|
u32 val = 0, val1 = 0, reg = 0;
|
|
int err = 0;
|
|
|
|
val = QLCRD32(adapter, QLC_83XX_SRE_SHIM_REG, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
dev_info(&adapter->pdev->dev, "SRE-Shim Ctrl:0x%x\n", val);
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
if (j == 0) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"Port 0 RxB Pause Threshold Regs[TC7..TC0]:");
|
|
reg = QLC_83XX_PORT0_THRESHOLD;
|
|
} else if (j == 1) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"Port 1 RxB Pause Threshold Regs[TC7..TC0]:");
|
|
reg = QLC_83XX_PORT1_THRESHOLD;
|
|
}
|
|
for (i = 0; i < 8; i++) {
|
|
val = QLCRD32(adapter, reg + (i * 0x4), &err);
|
|
if (err == -EIO)
|
|
return;
|
|
dev_info(&adapter->pdev->dev, "0x%x ", val);
|
|
}
|
|
dev_info(&adapter->pdev->dev, "\n");
|
|
}
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
if (j == 0) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"Port 0 RxB TC Max Cell Registers[4..1]:");
|
|
reg = QLC_83XX_PORT0_TC_MC_REG;
|
|
} else if (j == 1) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"Port 1 RxB TC Max Cell Registers[4..1]:");
|
|
reg = QLC_83XX_PORT1_TC_MC_REG;
|
|
}
|
|
for (i = 0; i < 4; i++) {
|
|
val = QLCRD32(adapter, reg + (i * 0x4), &err);
|
|
if (err == -EIO)
|
|
return;
|
|
dev_info(&adapter->pdev->dev, "0x%x ", val);
|
|
}
|
|
dev_info(&adapter->pdev->dev, "\n");
|
|
}
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
if (j == 0) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"Port 0 RxB Rx TC Stats[TC7..TC0]:");
|
|
reg = QLC_83XX_PORT0_TC_STATS;
|
|
} else if (j == 1) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"Port 1 RxB Rx TC Stats[TC7..TC0]:");
|
|
reg = QLC_83XX_PORT1_TC_STATS;
|
|
}
|
|
for (i = 7; i >= 0; i--) {
|
|
val = QLCRD32(adapter, reg, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
val &= ~(0x7 << 29); /* Reset bits 29 to 31 */
|
|
QLCWR32(adapter, reg, (val | (i << 29)));
|
|
val = QLCRD32(adapter, reg, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
dev_info(&adapter->pdev->dev, "0x%x ", val);
|
|
}
|
|
dev_info(&adapter->pdev->dev, "\n");
|
|
}
|
|
|
|
val = QLCRD32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
val1 = QLCRD32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
dev_info(&adapter->pdev->dev,
|
|
"IFB-Pause Thresholds: Port 2:0x%x, Port 3:0x%x\n",
|
|
val, val1);
|
|
}
|
|
|
|
|
|
static void qlcnic_83xx_disable_pause_frames(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 reg = 0, i, j;
|
|
|
|
if (qlcnic_83xx_lock_driver(adapter)) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"%s:failed to acquire driver lock\n", __func__);
|
|
return;
|
|
}
|
|
|
|
qlcnic_83xx_dump_pause_control_regs(adapter);
|
|
QLCWR32(adapter, QLC_83XX_SRE_SHIM_REG, 0x0);
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
if (j == 0)
|
|
reg = QLC_83XX_PORT0_THRESHOLD;
|
|
else if (j == 1)
|
|
reg = QLC_83XX_PORT1_THRESHOLD;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
QLCWR32(adapter, reg + (i * 0x4), 0x0);
|
|
}
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
if (j == 0)
|
|
reg = QLC_83XX_PORT0_TC_MC_REG;
|
|
else if (j == 1)
|
|
reg = QLC_83XX_PORT1_TC_MC_REG;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
QLCWR32(adapter, reg + (i * 0x4), 0x03FF03FF);
|
|
}
|
|
|
|
QLCWR32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD, 0);
|
|
QLCWR32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD, 0);
|
|
dev_info(&adapter->pdev->dev,
|
|
"Disabled pause frames successfully on all ports\n");
|
|
qlcnic_83xx_unlock_driver(adapter);
|
|
}
|
|
|
|
static void qlcnic_83xx_take_eport_out_of_reset(struct qlcnic_adapter *adapter)
|
|
{
|
|
QLCWR32(adapter, QLC_83XX_RESET_REG, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_PORT0, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_PORT1, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_PORT2, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_PORT3, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_SRESHIM, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_EPGSHIM, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_ETHERPCS, 0);
|
|
QLCWR32(adapter, QLC_83XX_RESET_CONTROL, 1);
|
|
}
|
|
|
|
static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev)
|
|
{
|
|
u32 heartbeat, peg_status;
|
|
int retries, ret = -EIO, err = 0;
|
|
|
|
retries = QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT;
|
|
p_dev->heartbeat = QLC_SHARED_REG_RD32(p_dev,
|
|
QLCNIC_PEG_ALIVE_COUNTER);
|
|
|
|
do {
|
|
msleep(QLCNIC_HEARTBEAT_PERIOD_MSECS);
|
|
heartbeat = QLC_SHARED_REG_RD32(p_dev,
|
|
QLCNIC_PEG_ALIVE_COUNTER);
|
|
if (heartbeat != p_dev->heartbeat) {
|
|
ret = QLCNIC_RCODE_SUCCESS;
|
|
break;
|
|
}
|
|
} while (--retries);
|
|
|
|
if (ret) {
|
|
dev_err(&p_dev->pdev->dev, "firmware hang detected\n");
|
|
qlcnic_83xx_take_eport_out_of_reset(p_dev);
|
|
qlcnic_83xx_disable_pause_frames(p_dev);
|
|
peg_status = QLC_SHARED_REG_RD32(p_dev,
|
|
QLCNIC_PEG_HALT_STATUS1);
|
|
dev_info(&p_dev->pdev->dev, "Dumping HW/FW registers\n"
|
|
"PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n"
|
|
"PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n"
|
|
"PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n"
|
|
"PEG_NET_4_PC: 0x%x\n", peg_status,
|
|
QLC_SHARED_REG_RD32(p_dev, QLCNIC_PEG_HALT_STATUS2),
|
|
QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_0, &err),
|
|
QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_1, &err),
|
|
QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_2, &err),
|
|
QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_3, &err),
|
|
QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_4, &err));
|
|
|
|
if (QLCNIC_FWERROR_CODE(peg_status) == 0x67)
|
|
dev_err(&p_dev->pdev->dev,
|
|
"Device is being reset err code 0x00006700.\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qlcnic_83xx_check_cmd_peg_status(struct qlcnic_adapter *p_dev)
|
|
{
|
|
int retries = QLCNIC_CMDPEG_CHECK_RETRY_COUNT;
|
|
u32 val;
|
|
|
|
do {
|
|
val = QLC_SHARED_REG_RD32(p_dev, QLCNIC_CMDPEG_STATE);
|
|
if (val == QLC_83XX_CMDPEG_COMPLETE)
|
|
return 0;
|
|
msleep(QLCNIC_CMDPEG_CHECK_DELAY);
|
|
} while (--retries);
|
|
|
|
dev_err(&p_dev->pdev->dev, "%s: failed, state = 0x%x\n", __func__, val);
|
|
return -EIO;
|
|
}
|
|
|
|
int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev)
|
|
{
|
|
int err;
|
|
|
|
err = qlcnic_83xx_check_cmd_peg_status(p_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
err = qlcnic_83xx_check_heartbeat(p_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int qlcnic_83xx_poll_reg(struct qlcnic_adapter *p_dev, u32 addr,
|
|
int duration, u32 mask, u32 status)
|
|
{
|
|
int timeout_error, err = 0;
|
|
u32 value;
|
|
u8 retries;
|
|
|
|
value = QLCRD32(p_dev, addr, &err);
|
|
if (err == -EIO)
|
|
return err;
|
|
retries = duration / 10;
|
|
|
|
do {
|
|
if ((value & mask) != status) {
|
|
timeout_error = 1;
|
|
msleep(duration / 10);
|
|
value = QLCRD32(p_dev, addr, &err);
|
|
if (err == -EIO)
|
|
return err;
|
|
} else {
|
|
timeout_error = 0;
|
|
break;
|
|
}
|
|
} while (retries--);
|
|
|
|
if (timeout_error) {
|
|
p_dev->ahw->reset.seq_error++;
|
|
dev_err(&p_dev->pdev->dev,
|
|
"%s: Timeout Err, entry_num = %d\n",
|
|
__func__, p_dev->ahw->reset.seq_index);
|
|
dev_err(&p_dev->pdev->dev,
|
|
"0x%08x 0x%08x 0x%08x\n",
|
|
value, mask, status);
|
|
}
|
|
|
|
return timeout_error;
|
|
}
|
|
|
|
static int qlcnic_83xx_reset_template_checksum(struct qlcnic_adapter *p_dev)
|
|
{
|
|
u32 sum = 0;
|
|
u16 *buff = (u16 *)p_dev->ahw->reset.buff;
|
|
int count = p_dev->ahw->reset.hdr->size / sizeof(u16);
|
|
|
|
while (count-- > 0)
|
|
sum += *buff++;
|
|
|
|
while (sum >> 16)
|
|
sum = (sum & 0xFFFF) + (sum >> 16);
|
|
|
|
if (~sum) {
|
|
return 0;
|
|
} else {
|
|
dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_dev)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = p_dev->ahw;
|
|
u32 addr, count, prev_ver, curr_ver;
|
|
u8 *p_buff;
|
|
|
|
if (ahw->reset.buff != NULL) {
|
|
prev_ver = p_dev->fw_version;
|
|
curr_ver = qlcnic_83xx_get_fw_version(p_dev);
|
|
if (curr_ver > prev_ver)
|
|
kfree(ahw->reset.buff);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
ahw->reset.seq_error = 0;
|
|
ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL);
|
|
if (p_dev->ahw->reset.buff == NULL)
|
|
return -ENOMEM;
|
|
|
|
p_buff = p_dev->ahw->reset.buff;
|
|
addr = QLC_83XX_RESET_TEMPLATE_ADDR;
|
|
count = sizeof(struct qlc_83xx_reset_hdr) / sizeof(u32);
|
|
|
|
/* Copy template header from flash */
|
|
if (qlcnic_83xx_flash_read32(p_dev, addr, p_buff, count)) {
|
|
dev_err(&p_dev->pdev->dev, "%s: flash read failed\n", __func__);
|
|
return -EIO;
|
|
}
|
|
ahw->reset.hdr = (struct qlc_83xx_reset_hdr *)ahw->reset.buff;
|
|
addr = QLC_83XX_RESET_TEMPLATE_ADDR + ahw->reset.hdr->hdr_size;
|
|
p_buff = ahw->reset.buff + ahw->reset.hdr->hdr_size;
|
|
count = (ahw->reset.hdr->size - ahw->reset.hdr->hdr_size) / sizeof(u32);
|
|
|
|
/* Copy rest of the template */
|
|
if (qlcnic_83xx_flash_read32(p_dev, addr, p_buff, count)) {
|
|
dev_err(&p_dev->pdev->dev, "%s: flash read failed\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (qlcnic_83xx_reset_template_checksum(p_dev))
|
|
return -EIO;
|
|
/* Get Stop, Start and Init command offsets */
|
|
ahw->reset.init_offset = ahw->reset.buff + ahw->reset.hdr->init_offset;
|
|
ahw->reset.start_offset = ahw->reset.buff +
|
|
ahw->reset.hdr->start_offset;
|
|
ahw->reset.stop_offset = ahw->reset.buff + ahw->reset.hdr->hdr_size;
|
|
return 0;
|
|
}
|
|
|
|
/* Read Write HW register command */
|
|
static void qlcnic_83xx_read_write_crb_reg(struct qlcnic_adapter *p_dev,
|
|
u32 raddr, u32 waddr)
|
|
{
|
|
int err = 0;
|
|
u32 value;
|
|
|
|
value = QLCRD32(p_dev, raddr, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
qlcnic_83xx_wrt_reg_indirect(p_dev, waddr, value);
|
|
}
|
|
|
|
/* Read Modify Write HW register command */
|
|
static void qlcnic_83xx_rmw_crb_reg(struct qlcnic_adapter *p_dev,
|
|
u32 raddr, u32 waddr,
|
|
struct qlc_83xx_rmw *p_rmw_hdr)
|
|
{
|
|
int err = 0;
|
|
u32 value;
|
|
|
|
if (p_rmw_hdr->index_a) {
|
|
value = p_dev->ahw->reset.array[p_rmw_hdr->index_a];
|
|
} else {
|
|
value = QLCRD32(p_dev, raddr, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
}
|
|
|
|
value &= p_rmw_hdr->mask;
|
|
value <<= p_rmw_hdr->shl;
|
|
value >>= p_rmw_hdr->shr;
|
|
value |= p_rmw_hdr->or_value;
|
|
value ^= p_rmw_hdr->xor_value;
|
|
qlcnic_83xx_wrt_reg_indirect(p_dev, waddr, value);
|
|
}
|
|
|
|
/* Write HW register command */
|
|
static void qlcnic_83xx_write_list(struct qlcnic_adapter *p_dev,
|
|
struct qlc_83xx_entry_hdr *p_hdr)
|
|
{
|
|
int i;
|
|
struct qlc_83xx_entry *entry;
|
|
|
|
entry = (struct qlc_83xx_entry *)((char *)p_hdr +
|
|
sizeof(struct qlc_83xx_entry_hdr));
|
|
|
|
for (i = 0; i < p_hdr->count; i++, entry++) {
|
|
qlcnic_83xx_wrt_reg_indirect(p_dev, entry->arg1,
|
|
entry->arg2);
|
|
if (p_hdr->delay)
|
|
udelay((u32)(p_hdr->delay));
|
|
}
|
|
}
|
|
|
|
/* Read and Write instruction */
|
|
static void qlcnic_83xx_read_write_list(struct qlcnic_adapter *p_dev,
|
|
struct qlc_83xx_entry_hdr *p_hdr)
|
|
{
|
|
int i;
|
|
struct qlc_83xx_entry *entry;
|
|
|
|
entry = (struct qlc_83xx_entry *)((char *)p_hdr +
|
|
sizeof(struct qlc_83xx_entry_hdr));
|
|
|
|
for (i = 0; i < p_hdr->count; i++, entry++) {
|
|
qlcnic_83xx_read_write_crb_reg(p_dev, entry->arg1,
|
|
entry->arg2);
|
|
if (p_hdr->delay)
|
|
udelay((u32)(p_hdr->delay));
|
|
}
|
|
}
|
|
|
|
/* Poll HW register command */
|
|
static void qlcnic_83xx_poll_list(struct qlcnic_adapter *p_dev,
|
|
struct qlc_83xx_entry_hdr *p_hdr)
|
|
{
|
|
long delay;
|
|
struct qlc_83xx_entry *entry;
|
|
struct qlc_83xx_poll *poll;
|
|
int i, err = 0;
|
|
unsigned long arg1, arg2;
|
|
|
|
poll = (struct qlc_83xx_poll *)((char *)p_hdr +
|
|
sizeof(struct qlc_83xx_entry_hdr));
|
|
|
|
entry = (struct qlc_83xx_entry *)((char *)poll +
|
|
sizeof(struct qlc_83xx_poll));
|
|
delay = (long)p_hdr->delay;
|
|
|
|
if (!delay) {
|
|
for (i = 0; i < p_hdr->count; i++, entry++)
|
|
qlcnic_83xx_poll_reg(p_dev, entry->arg1,
|
|
delay, poll->mask,
|
|
poll->status);
|
|
} else {
|
|
for (i = 0; i < p_hdr->count; i++, entry++) {
|
|
arg1 = entry->arg1;
|
|
arg2 = entry->arg2;
|
|
if (delay) {
|
|
if (qlcnic_83xx_poll_reg(p_dev,
|
|
arg1, delay,
|
|
poll->mask,
|
|
poll->status)){
|
|
QLCRD32(p_dev, arg1, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
QLCRD32(p_dev, arg2, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Poll and write HW register command */
|
|
static void qlcnic_83xx_poll_write_list(struct qlcnic_adapter *p_dev,
|
|
struct qlc_83xx_entry_hdr *p_hdr)
|
|
{
|
|
int i;
|
|
long delay;
|
|
struct qlc_83xx_quad_entry *entry;
|
|
struct qlc_83xx_poll *poll;
|
|
|
|
poll = (struct qlc_83xx_poll *)((char *)p_hdr +
|
|
sizeof(struct qlc_83xx_entry_hdr));
|
|
entry = (struct qlc_83xx_quad_entry *)((char *)poll +
|
|
sizeof(struct qlc_83xx_poll));
|
|
delay = (long)p_hdr->delay;
|
|
|
|
for (i = 0; i < p_hdr->count; i++, entry++) {
|
|
qlcnic_83xx_wrt_reg_indirect(p_dev, entry->dr_addr,
|
|
entry->dr_value);
|
|
qlcnic_83xx_wrt_reg_indirect(p_dev, entry->ar_addr,
|
|
entry->ar_value);
|
|
if (delay)
|
|
qlcnic_83xx_poll_reg(p_dev, entry->ar_addr, delay,
|
|
poll->mask, poll->status);
|
|
}
|
|
}
|
|
|
|
/* Read Modify Write register command */
|
|
static void qlcnic_83xx_read_modify_write(struct qlcnic_adapter *p_dev,
|
|
struct qlc_83xx_entry_hdr *p_hdr)
|
|
{
|
|
int i;
|
|
struct qlc_83xx_entry *entry;
|
|
struct qlc_83xx_rmw *rmw_hdr;
|
|
|
|
rmw_hdr = (struct qlc_83xx_rmw *)((char *)p_hdr +
|
|
sizeof(struct qlc_83xx_entry_hdr));
|
|
|
|
entry = (struct qlc_83xx_entry *)((char *)rmw_hdr +
|
|
sizeof(struct qlc_83xx_rmw));
|
|
|
|
for (i = 0; i < p_hdr->count; i++, entry++) {
|
|
qlcnic_83xx_rmw_crb_reg(p_dev, entry->arg1,
|
|
entry->arg2, rmw_hdr);
|
|
if (p_hdr->delay)
|
|
udelay((u32)(p_hdr->delay));
|
|
}
|
|
}
|
|
|
|
static void qlcnic_83xx_pause(struct qlc_83xx_entry_hdr *p_hdr)
|
|
{
|
|
if (p_hdr->delay)
|
|
mdelay((u32)((long)p_hdr->delay));
|
|
}
|
|
|
|
/* Read and poll register command */
|
|
static void qlcnic_83xx_poll_read_list(struct qlcnic_adapter *p_dev,
|
|
struct qlc_83xx_entry_hdr *p_hdr)
|
|
{
|
|
long delay;
|
|
int index, i, j, err;
|
|
struct qlc_83xx_quad_entry *entry;
|
|
struct qlc_83xx_poll *poll;
|
|
unsigned long addr;
|
|
|
|
poll = (struct qlc_83xx_poll *)((char *)p_hdr +
|
|
sizeof(struct qlc_83xx_entry_hdr));
|
|
|
|
entry = (struct qlc_83xx_quad_entry *)((char *)poll +
|
|
sizeof(struct qlc_83xx_poll));
|
|
delay = (long)p_hdr->delay;
|
|
|
|
for (i = 0; i < p_hdr->count; i++, entry++) {
|
|
qlcnic_83xx_wrt_reg_indirect(p_dev, entry->ar_addr,
|
|
entry->ar_value);
|
|
if (delay) {
|
|
if (!qlcnic_83xx_poll_reg(p_dev, entry->ar_addr, delay,
|
|
poll->mask, poll->status)){
|
|
index = p_dev->ahw->reset.array_index;
|
|
addr = entry->dr_addr;
|
|
j = QLCRD32(p_dev, addr, &err);
|
|
if (err == -EIO)
|
|
return;
|
|
|
|
p_dev->ahw->reset.array[index++] = j;
|
|
|
|
if (index == QLC_83XX_MAX_RESET_SEQ_ENTRIES)
|
|
p_dev->ahw->reset.array_index = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void qlcnic_83xx_seq_end(struct qlcnic_adapter *p_dev)
|
|
{
|
|
p_dev->ahw->reset.seq_end = 1;
|
|
}
|
|
|
|
static void qlcnic_83xx_template_end(struct qlcnic_adapter *p_dev)
|
|
{
|
|
p_dev->ahw->reset.template_end = 1;
|
|
if (p_dev->ahw->reset.seq_error == 0)
|
|
dev_err(&p_dev->pdev->dev,
|
|
"HW restart process completed successfully.\n");
|
|
else
|
|
dev_err(&p_dev->pdev->dev,
|
|
"HW restart completed with timeout errors.\n");
|
|
}
|
|
|
|
/**
|
|
* qlcnic_83xx_exec_template_cmd
|
|
*
|
|
* @p_dev: adapter structure
|
|
* @p_buff: Poiter to instruction template
|
|
*
|
|
* Template provides instructions to stop, restart and initalize firmware.
|
|
* These instructions are abstracted as a series of read, write and
|
|
* poll operations on hardware registers. Register information and operation
|
|
* specifics are not exposed to the driver. Driver reads the template from
|
|
* flash and executes the instructions located at pre-defined offsets.
|
|
*
|
|
* Returns: None
|
|
* */
|
|
static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev,
|
|
char *p_buff)
|
|
{
|
|
int index, entries;
|
|
struct qlc_83xx_entry_hdr *p_hdr;
|
|
char *entry = p_buff;
|
|
|
|
p_dev->ahw->reset.seq_end = 0;
|
|
p_dev->ahw->reset.template_end = 0;
|
|
entries = p_dev->ahw->reset.hdr->entries;
|
|
index = p_dev->ahw->reset.seq_index;
|
|
|
|
for (; (!p_dev->ahw->reset.seq_end) && (index < entries); index++) {
|
|
p_hdr = (struct qlc_83xx_entry_hdr *)entry;
|
|
|
|
switch (p_hdr->cmd) {
|
|
case QLC_83XX_OPCODE_NOP:
|
|
break;
|
|
case QLC_83XX_OPCODE_WRITE_LIST:
|
|
qlcnic_83xx_write_list(p_dev, p_hdr);
|
|
break;
|
|
case QLC_83XX_OPCODE_READ_WRITE_LIST:
|
|
qlcnic_83xx_read_write_list(p_dev, p_hdr);
|
|
break;
|
|
case QLC_83XX_OPCODE_POLL_LIST:
|
|
qlcnic_83xx_poll_list(p_dev, p_hdr);
|
|
break;
|
|
case QLC_83XX_OPCODE_POLL_WRITE_LIST:
|
|
qlcnic_83xx_poll_write_list(p_dev, p_hdr);
|
|
break;
|
|
case QLC_83XX_OPCODE_READ_MODIFY_WRITE:
|
|
qlcnic_83xx_read_modify_write(p_dev, p_hdr);
|
|
break;
|
|
case QLC_83XX_OPCODE_SEQ_PAUSE:
|
|
qlcnic_83xx_pause(p_hdr);
|
|
break;
|
|
case QLC_83XX_OPCODE_SEQ_END:
|
|
qlcnic_83xx_seq_end(p_dev);
|
|
break;
|
|
case QLC_83XX_OPCODE_TMPL_END:
|
|
qlcnic_83xx_template_end(p_dev);
|
|
break;
|
|
case QLC_83XX_OPCODE_POLL_READ_LIST:
|
|
qlcnic_83xx_poll_read_list(p_dev, p_hdr);
|
|
break;
|
|
default:
|
|
dev_err(&p_dev->pdev->dev,
|
|
"%s: Unknown opcode 0x%04x in template %d\n",
|
|
__func__, p_hdr->cmd, index);
|
|
break;
|
|
}
|
|
entry += p_hdr->size;
|
|
}
|
|
p_dev->ahw->reset.seq_index = index;
|
|
}
|
|
|
|
static void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev)
|
|
{
|
|
p_dev->ahw->reset.seq_index = 0;
|
|
|
|
qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.stop_offset);
|
|
if (p_dev->ahw->reset.seq_end != 1)
|
|
dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
|
|
}
|
|
|
|
static void qlcnic_83xx_start_hw(struct qlcnic_adapter *p_dev)
|
|
{
|
|
qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.start_offset);
|
|
if (p_dev->ahw->reset.template_end != 1)
|
|
dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
|
|
}
|
|
|
|
static void qlcnic_83xx_init_hw(struct qlcnic_adapter *p_dev)
|
|
{
|
|
qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.init_offset);
|
|
if (p_dev->ahw->reset.seq_end != 1)
|
|
dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
|
|
}
|
|
|
|
static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info;
|
|
int err = -EIO;
|
|
|
|
if (request_firmware(&fw_info->fw, fw_info->fw_file_name,
|
|
&(adapter->pdev->dev))) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"No file FW image, loading flash FW image.\n");
|
|
QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID,
|
|
QLC_83XX_BOOT_FROM_FLASH);
|
|
} else {
|
|
if (qlcnic_83xx_copy_fw_file(adapter))
|
|
return err;
|
|
QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID,
|
|
QLC_83XX_BOOT_FROM_FILE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter)
|
|
{
|
|
u32 val;
|
|
int err = -EIO;
|
|
|
|
qlcnic_83xx_stop_hw(adapter);
|
|
|
|
/* Collect FW register dump if required */
|
|
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
|
|
if (!(val & QLC_83XX_IDC_GRACEFULL_RESET))
|
|
qlcnic_dump_fw(adapter);
|
|
qlcnic_83xx_init_hw(adapter);
|
|
|
|
if (qlcnic_83xx_copy_bootloader(adapter))
|
|
return err;
|
|
/* Boot either flash image or firmware image from host file system */
|
|
if (qlcnic_load_fw_file) {
|
|
if (qlcnic_83xx_load_fw_image_from_host(adapter))
|
|
return err;
|
|
} else {
|
|
QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID,
|
|
QLC_83XX_BOOT_FROM_FLASH);
|
|
}
|
|
|
|
qlcnic_83xx_start_hw(adapter);
|
|
if (qlcnic_83xx_check_hw_status(adapter))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter)
|
|
{
|
|
int err;
|
|
struct qlcnic_info nic_info;
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
|
|
memset(&nic_info, 0, sizeof(struct qlcnic_info));
|
|
err = qlcnic_get_nic_info(adapter, &nic_info, ahw->pci_func);
|
|
if (err)
|
|
return -EIO;
|
|
|
|
ahw->physical_port = (u8) nic_info.phys_port;
|
|
ahw->switch_mode = nic_info.switch_mode;
|
|
ahw->max_tx_ques = nic_info.max_tx_ques;
|
|
ahw->max_rx_ques = nic_info.max_rx_ques;
|
|
ahw->capabilities = nic_info.capabilities;
|
|
ahw->max_mac_filters = nic_info.max_mac_filters;
|
|
ahw->max_mtu = nic_info.max_mtu;
|
|
|
|
adapter->max_tx_rings = ahw->max_tx_ques;
|
|
adapter->max_sds_rings = ahw->max_rx_ques;
|
|
/* eSwitch capability indicates vNIC mode.
|
|
* vNIC and SRIOV are mutually exclusive operational modes.
|
|
* If SR-IOV capability is detected, SR-IOV physical function
|
|
* will get initialized in default mode.
|
|
* SR-IOV virtual function initialization follows a
|
|
* different code path and opmode.
|
|
* SRIOV mode has precedence over vNIC mode.
|
|
*/
|
|
if (test_bit(__QLCNIC_SRIOV_CAPABLE, &adapter->state))
|
|
return QLC_83XX_DEFAULT_OPMODE;
|
|
|
|
if (ahw->capabilities & QLC_83XX_ESWITCH_CAPABILITY)
|
|
return QLCNIC_VNIC_MODE;
|
|
|
|
return QLC_83XX_DEFAULT_OPMODE;
|
|
}
|
|
|
|
int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
int ret;
|
|
|
|
ret = qlcnic_83xx_get_nic_configuration(adapter);
|
|
if (ret == -EIO)
|
|
return -EIO;
|
|
|
|
if (ret == QLCNIC_VNIC_MODE) {
|
|
ahw->nic_mode = QLCNIC_VNIC_MODE;
|
|
|
|
if (qlcnic_83xx_config_vnic_opmode(adapter))
|
|
return -EIO;
|
|
|
|
adapter->max_sds_rings = QLCNIC_MAX_VNIC_SDS_RINGS;
|
|
adapter->max_tx_rings = QLCNIC_MAX_VNIC_TX_RINGS;
|
|
} else if (ret == QLC_83XX_DEFAULT_OPMODE) {
|
|
ahw->nic_mode = QLCNIC_DEFAULT_MODE;
|
|
adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver;
|
|
ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry;
|
|
adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS;
|
|
adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS;
|
|
} else {
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qlcnic_83xx_config_buff_descriptors(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
|
|
if (ahw->port_type == QLCNIC_XGBE) {
|
|
adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
|
|
adapter->max_rxd = MAX_RCV_DESCRIPTORS_10G;
|
|
adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
|
|
adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
|
|
|
|
} else if (ahw->port_type == QLCNIC_GBE) {
|
|
adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G;
|
|
adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
|
|
adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
|
|
adapter->max_rxd = MAX_RCV_DESCRIPTORS_1G;
|
|
}
|
|
adapter->num_txd = MAX_CMD_DESCRIPTORS;
|
|
adapter->max_rds_rings = MAX_RDS_RINGS;
|
|
}
|
|
|
|
static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter)
|
|
{
|
|
int err = -EIO;
|
|
|
|
qlcnic_83xx_get_minidump_template(adapter);
|
|
if (qlcnic_83xx_get_port_info(adapter))
|
|
return err;
|
|
|
|
qlcnic_83xx_config_buff_descriptors(adapter);
|
|
adapter->ahw->msix_supported = !!qlcnic_use_msi_x;
|
|
adapter->flags |= QLCNIC_ADAPTER_INITIALIZED;
|
|
|
|
dev_info(&adapter->pdev->dev, "HAL Version: %d\n",
|
|
adapter->ahw->fw_hal_version);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define IS_QLC_83XX_USED(a, b, c) (((1 << a->portnum) & b) || ((c >> 6) & 0x1))
|
|
static void qlcnic_83xx_clear_function_resources(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_cmd_args cmd;
|
|
u32 presence_mask, audit_mask;
|
|
int status;
|
|
|
|
presence_mask = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE);
|
|
audit_mask = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT);
|
|
|
|
if (IS_QLC_83XX_USED(adapter, presence_mask, audit_mask)) {
|
|
status = qlcnic_alloc_mbx_args(&cmd, adapter,
|
|
QLCNIC_CMD_STOP_NIC_FUNC);
|
|
if (status)
|
|
return;
|
|
|
|
cmd.req.arg[1] = BIT_31;
|
|
status = qlcnic_issue_cmd(adapter, &cmd);
|
|
if (status)
|
|
dev_err(&adapter->pdev->dev,
|
|
"Failed to clean up the function resources\n");
|
|
qlcnic_free_mbx_args(&cmd);
|
|
}
|
|
}
|
|
|
|
static int qlcnic_83xx_get_fw_info(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct qlc_83xx_fw_info *fw_info;
|
|
int err = 0;
|
|
|
|
ahw->fw_info = kzalloc(sizeof(*fw_info), GFP_KERNEL);
|
|
if (!ahw->fw_info) {
|
|
err = -ENOMEM;
|
|
} else {
|
|
fw_info = ahw->fw_info;
|
|
switch (pdev->device) {
|
|
case PCI_DEVICE_ID_QLOGIC_QLE834X:
|
|
strncpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
|
|
QLC_FW_FILE_NAME_LEN);
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_QLE844X:
|
|
strncpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME,
|
|
QLC_FW_FILE_NAME_LEN);
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "%s: Invalid device id\n",
|
|
__func__);
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void qlcnic_83xx_init_rings(struct qlcnic_adapter *adapter)
|
|
{
|
|
u8 rx_cnt = QLCNIC_DEF_SDS_RINGS;
|
|
u8 tx_cnt = QLCNIC_DEF_TX_RINGS;
|
|
|
|
adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS;
|
|
adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS;
|
|
|
|
if (!adapter->ahw->msix_supported) {
|
|
rx_cnt = QLCNIC_SINGLE_RING;
|
|
tx_cnt = QLCNIC_SINGLE_RING;
|
|
}
|
|
|
|
/* compute and set drv sds rings */
|
|
qlcnic_set_tx_ring_count(adapter, tx_cnt);
|
|
qlcnic_set_sds_ring_count(adapter, rx_cnt);
|
|
}
|
|
|
|
int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
struct qlcnic_dcb *dcb;
|
|
int err = 0;
|
|
|
|
ahw->msix_supported = !!qlcnic_use_msi_x;
|
|
|
|
qlcnic_83xx_init_rings(adapter);
|
|
|
|
err = qlcnic_83xx_init_mailbox_work(adapter);
|
|
if (err)
|
|
goto exit;
|
|
|
|
if (qlcnic_sriov_vf_check(adapter)) {
|
|
err = qlcnic_sriov_vf_init(adapter, pci_using_dac);
|
|
if (err)
|
|
goto detach_mbx;
|
|
else
|
|
return err;
|
|
}
|
|
|
|
if (qlcnic_83xx_read_flash_descriptor_table(adapter) ||
|
|
qlcnic_83xx_read_flash_mfg_id(adapter)) {
|
|
dev_err(&adapter->pdev->dev, "Failed reading flash mfg id\n");
|
|
err = -ENOTRECOVERABLE;
|
|
goto detach_mbx;
|
|
}
|
|
|
|
err = qlcnic_83xx_check_hw_status(adapter);
|
|
if (err)
|
|
goto detach_mbx;
|
|
|
|
err = qlcnic_83xx_get_fw_info(adapter);
|
|
if (err)
|
|
goto detach_mbx;
|
|
|
|
err = qlcnic_83xx_idc_init(adapter);
|
|
if (err)
|
|
goto detach_mbx;
|
|
|
|
err = qlcnic_setup_intr(adapter);
|
|
if (err) {
|
|
dev_err(&adapter->pdev->dev, "Failed to setup interrupt\n");
|
|
goto disable_intr;
|
|
}
|
|
|
|
err = qlcnic_83xx_setup_mbx_intr(adapter);
|
|
if (err)
|
|
goto disable_mbx_intr;
|
|
|
|
qlcnic_83xx_clear_function_resources(adapter);
|
|
|
|
INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work);
|
|
|
|
/* register for NIC IDC AEN Events */
|
|
qlcnic_83xx_register_nic_idc_func(adapter, 1);
|
|
|
|
/* Configure default, SR-IOV or Virtual NIC mode of operation */
|
|
err = qlcnic_83xx_configure_opmode(adapter);
|
|
if (err)
|
|
goto disable_mbx_intr;
|
|
|
|
|
|
/* Perform operating mode specific initialization */
|
|
err = adapter->nic_ops->init_driver(adapter);
|
|
if (err)
|
|
goto disable_mbx_intr;
|
|
|
|
dcb = adapter->dcb;
|
|
|
|
if (dcb && qlcnic_dcb_attach(dcb))
|
|
qlcnic_clear_dcb_ops(dcb);
|
|
|
|
/* Periodically monitor device status */
|
|
qlcnic_83xx_idc_poll_dev_state(&adapter->fw_work.work);
|
|
return 0;
|
|
|
|
disable_mbx_intr:
|
|
qlcnic_83xx_free_mbx_intr(adapter);
|
|
|
|
disable_intr:
|
|
qlcnic_teardown_intr(adapter);
|
|
|
|
detach_mbx:
|
|
qlcnic_83xx_detach_mailbox_work(adapter);
|
|
qlcnic_83xx_free_mailbox(ahw->mailbox);
|
|
ahw->mailbox = NULL;
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
void qlcnic_83xx_aer_stop_poll_work(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
struct qlc_83xx_idc *idc = &ahw->idc;
|
|
|
|
clear_bit(QLC_83XX_MBX_READY, &idc->status);
|
|
cancel_delayed_work_sync(&adapter->fw_work);
|
|
|
|
if (ahw->nic_mode == QLCNIC_VNIC_MODE)
|
|
qlcnic_83xx_disable_vnic_mode(adapter, 1);
|
|
|
|
qlcnic_83xx_idc_detach_driver(adapter);
|
|
qlcnic_83xx_register_nic_idc_func(adapter, 0);
|
|
|
|
cancel_delayed_work_sync(&adapter->idc_aen_work);
|
|
}
|
|
|
|
int qlcnic_83xx_aer_reset(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
struct qlc_83xx_idc *idc = &ahw->idc;
|
|
int ret = 0;
|
|
u32 owner;
|
|
|
|
/* Mark the previous IDC state as NEED_RESET so
|
|
* that state_entry() will perform the reattachment
|
|
* and bringup the device
|
|
*/
|
|
idc->prev_state = QLC_83XX_IDC_DEV_NEED_RESET;
|
|
owner = qlcnic_83xx_idc_find_reset_owner_id(adapter);
|
|
if (ahw->pci_func == owner) {
|
|
ret = qlcnic_83xx_restart_hw(adapter);
|
|
if (ret < 0)
|
|
return ret;
|
|
qlcnic_83xx_idc_clear_registers(adapter, 0);
|
|
}
|
|
|
|
ret = idc->state_entry(adapter);
|
|
return ret;
|
|
}
|
|
|
|
void qlcnic_83xx_aer_start_poll_work(struct qlcnic_adapter *adapter)
|
|
{
|
|
struct qlcnic_hardware_context *ahw = adapter->ahw;
|
|
struct qlc_83xx_idc *idc = &ahw->idc;
|
|
u32 owner;
|
|
|
|
idc->prev_state = QLC_83XX_IDC_DEV_READY;
|
|
owner = qlcnic_83xx_idc_find_reset_owner_id(adapter);
|
|
if (ahw->pci_func == owner)
|
|
qlcnic_83xx_idc_enter_ready_state(adapter, 0);
|
|
|
|
qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state, 0);
|
|
}
|