forked from Minki/linux
f8ae2f08d2
arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for the OMAP DSS panel driver for generic DPI displays. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
523 lines
13 KiB
C
523 lines
13 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-am3517evm.c
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments Incorporated
|
|
* Author: Ranjith Lohithakshan <ranjithl@ti.com>
|
|
*
|
|
* Based on mach-omap2/board-omap3evm.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
|
|
* whether express or implied; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c/pca953x.h>
|
|
#include <linux/can/platform/ti_hecc.h>
|
|
#include <linux/davinci_emac.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/am35xx.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/board.h>
|
|
#include <plat/common.h>
|
|
#include <plat/usb.h>
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-generic-dpi.h>
|
|
|
|
#include "mux.h"
|
|
#include "control.h"
|
|
|
|
#define AM35XX_EVM_MDIO_FREQUENCY (1000000)
|
|
|
|
static struct mdio_platform_data am3517_evm_mdio_pdata = {
|
|
.bus_freq = AM35XX_EVM_MDIO_FREQUENCY,
|
|
};
|
|
|
|
static struct resource am3517_mdio_resources[] = {
|
|
{
|
|
.start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET,
|
|
.end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET +
|
|
SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device am3517_mdio_device = {
|
|
.name = "davinci_mdio",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(am3517_mdio_resources),
|
|
.resource = am3517_mdio_resources,
|
|
.dev.platform_data = &am3517_evm_mdio_pdata,
|
|
};
|
|
|
|
static struct emac_platform_data am3517_evm_emac_pdata = {
|
|
.rmii_en = 1,
|
|
};
|
|
|
|
static struct resource am3517_emac_resources[] = {
|
|
{
|
|
.start = AM35XX_IPSS_EMAC_BASE,
|
|
.end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
|
|
.end = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
|
|
.end = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
|
|
.end = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
|
|
.end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device am3517_emac_device = {
|
|
.name = "davinci_emac",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(am3517_emac_resources),
|
|
.resource = am3517_emac_resources,
|
|
};
|
|
|
|
static void am3517_enable_ethernet_int(void)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
|
|
AM35XX_CPGMAC_C0_TX_PULSE_CLR |
|
|
AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
|
|
AM35XX_CPGMAC_C0_RX_THRESH_CLR);
|
|
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
}
|
|
|
|
static void am3517_disable_ethernet_int(void)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
|
|
AM35XX_CPGMAC_C0_TX_PULSE_CLR);
|
|
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
}
|
|
|
|
static void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
|
|
{
|
|
unsigned int regval;
|
|
|
|
pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET;
|
|
pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET;
|
|
pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET;
|
|
pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE;
|
|
pdata->version = EMAC_VERSION_2;
|
|
pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR;
|
|
pdata->interrupt_enable = am3517_enable_ethernet_int;
|
|
pdata->interrupt_disable = am3517_disable_ethernet_int;
|
|
am3517_emac_device.dev.platform_data = pdata;
|
|
platform_device_register(&am3517_emac_device);
|
|
platform_device_register(&am3517_mdio_device);
|
|
clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev),
|
|
NULL, &am3517_emac_device.dev);
|
|
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
|
|
regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
|
|
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
|
|
|
|
return ;
|
|
}
|
|
|
|
|
|
|
|
#define LCD_PANEL_PWR 176
|
|
#define LCD_PANEL_BKLIGHT_PWR 182
|
|
#define LCD_PANEL_PWM 181
|
|
|
|
static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("s35390a", 0x30),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* RTC - S35390A
|
|
*/
|
|
#define GPIO_RTCS35390A_IRQ 55
|
|
|
|
static void __init am3517_evm_rtc_init(void)
|
|
{
|
|
int r;
|
|
|
|
omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
|
|
r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
|
|
if (r < 0) {
|
|
printk(KERN_WARNING "failed to request GPIO#%d\n",
|
|
GPIO_RTCS35390A_IRQ);
|
|
return;
|
|
}
|
|
r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
|
|
if (r < 0) {
|
|
printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
|
|
GPIO_RTCS35390A_IRQ);
|
|
gpio_free(GPIO_RTCS35390A_IRQ);
|
|
return;
|
|
}
|
|
am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
|
|
}
|
|
|
|
/*
|
|
* I2C GPIO Expander - TCA6416
|
|
*/
|
|
|
|
/* Mounted on Base-Board */
|
|
static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
|
|
.gpio_base = OMAP_MAX_GPIO_LINES,
|
|
};
|
|
static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("tlv320aic23", 0x1A),
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("tca6416", 0x21),
|
|
.platform_data = &am3517evm_gpio_expander_info_0,
|
|
},
|
|
};
|
|
|
|
/* Mounted on UI Card */
|
|
static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
|
|
.gpio_base = OMAP_MAX_GPIO_LINES + 16,
|
|
};
|
|
static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
|
|
.gpio_base = OMAP_MAX_GPIO_LINES + 32,
|
|
};
|
|
static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("tca6416", 0x20),
|
|
.platform_data = &am3517evm_ui_gpio_expander_info_1,
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("tca6416", 0x21),
|
|
.platform_data = &am3517evm_ui_gpio_expander_info_2,
|
|
},
|
|
};
|
|
|
|
static int __init am3517_evm_i2c_init(void)
|
|
{
|
|
omap_register_i2c_bus(1, 400, NULL, 0);
|
|
omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
|
|
ARRAY_SIZE(am3517evm_i2c2_boardinfo));
|
|
omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
|
|
ARRAY_SIZE(am3517evm_i2c3_boardinfo));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lcd_enabled;
|
|
static int dvi_enabled;
|
|
|
|
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
|
|
defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
|
|
static void __init am3517_evm_display_init(void)
|
|
{
|
|
int r;
|
|
|
|
omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
|
|
/*
|
|
* Enable GPIO 182 = LCD Backlight Power
|
|
*/
|
|
r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
|
|
if (r) {
|
|
printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
|
|
return;
|
|
}
|
|
gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
|
|
/*
|
|
* Enable GPIO 181 = LCD Panel PWM
|
|
*/
|
|
r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
|
|
if (r) {
|
|
printk(KERN_ERR "failed to get lcd_pwm\n");
|
|
goto err_1;
|
|
}
|
|
gpio_direction_output(LCD_PANEL_PWM, 1);
|
|
/*
|
|
* Enable GPIO 176 = LCD Panel Power enable pin
|
|
*/
|
|
r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
|
|
if (r) {
|
|
printk(KERN_ERR "failed to get lcd_panel_pwr\n");
|
|
goto err_2;
|
|
}
|
|
gpio_direction_output(LCD_PANEL_PWR, 1);
|
|
|
|
printk(KERN_INFO "Display initialized successfully\n");
|
|
return;
|
|
|
|
err_2:
|
|
gpio_free(LCD_PANEL_PWM);
|
|
err_1:
|
|
gpio_free(LCD_PANEL_BKLIGHT_PWR);
|
|
}
|
|
#else
|
|
static void __init am3517_evm_display_init(void) {}
|
|
#endif
|
|
|
|
static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
|
|
{
|
|
if (dvi_enabled) {
|
|
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
|
|
return -EINVAL;
|
|
}
|
|
gpio_set_value(LCD_PANEL_PWR, 1);
|
|
lcd_enabled = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
|
|
{
|
|
gpio_set_value(LCD_PANEL_PWR, 0);
|
|
lcd_enabled = 0;
|
|
}
|
|
|
|
static struct panel_generic_dpi_data lcd_panel = {
|
|
.name = "sharp_lq",
|
|
.platform_enable = am3517_evm_panel_enable_lcd,
|
|
.platform_disable = am3517_evm_panel_disable_lcd,
|
|
};
|
|
|
|
static struct omap_dss_device am3517_evm_lcd_device = {
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
.name = "lcd",
|
|
.driver_name = "generic_dpi_panel",
|
|
.data = &lcd_panel,
|
|
.phy.dpi.data_lines = 16,
|
|
};
|
|
|
|
static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
|
|
{
|
|
}
|
|
|
|
static struct omap_dss_device am3517_evm_tv_device = {
|
|
.type = OMAP_DISPLAY_TYPE_VENC,
|
|
.name = "tv",
|
|
.driver_name = "venc",
|
|
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
|
|
.platform_enable = am3517_evm_panel_enable_tv,
|
|
.platform_disable = am3517_evm_panel_disable_tv,
|
|
};
|
|
|
|
static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
|
|
{
|
|
if (lcd_enabled) {
|
|
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
|
|
return -EINVAL;
|
|
}
|
|
dvi_enabled = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
|
|
{
|
|
dvi_enabled = 0;
|
|
}
|
|
|
|
static struct panel_generic_dpi_data dvi_panel = {
|
|
.name = "generic",
|
|
.platform_enable = am3517_evm_panel_enable_dvi,
|
|
.platform_disable = am3517_evm_panel_disable_dvi,
|
|
};
|
|
|
|
static struct omap_dss_device am3517_evm_dvi_device = {
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
.name = "dvi",
|
|
.driver_name = "generic_dpi_panel",
|
|
.data = &dvi_panel,
|
|
.phy.dpi.data_lines = 24,
|
|
};
|
|
|
|
static struct omap_dss_device *am3517_evm_dss_devices[] = {
|
|
&am3517_evm_lcd_device,
|
|
&am3517_evm_tv_device,
|
|
&am3517_evm_dvi_device,
|
|
};
|
|
|
|
static struct omap_dss_board_info am3517_evm_dss_data = {
|
|
.num_devices = ARRAY_SIZE(am3517_evm_dss_devices),
|
|
.devices = am3517_evm_dss_devices,
|
|
.default_device = &am3517_evm_lcd_device,
|
|
};
|
|
|
|
/*
|
|
* Board initialization
|
|
*/
|
|
static void __init am3517_evm_init_early(void)
|
|
{
|
|
omap2_init_common_infrastructure();
|
|
omap2_init_common_devices(NULL, NULL);
|
|
}
|
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
.interface_type = MUSB_INTERFACE_ULPI,
|
|
.mode = MUSB_OTG,
|
|
.power = 500,
|
|
.set_phy_power = am35x_musb_phy_power,
|
|
.clear_irq = am35x_musb_clear_irq,
|
|
.set_mode = am35x_musb_set_mode,
|
|
.reset = am35x_musb_reset,
|
|
};
|
|
|
|
static __init void am3517_evm_musb_init(void)
|
|
{
|
|
u32 devconf2;
|
|
|
|
/*
|
|
* Set up USB clock/mode in the DEVCONF2 register.
|
|
*/
|
|
devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
|
|
|
|
/* USB2.0 PHY reference clock is 13 MHz */
|
|
devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE);
|
|
devconf2 |= CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN
|
|
| CONF2_DATPOL;
|
|
|
|
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
|
|
|
|
usb_musb_init(&musb_board_data);
|
|
}
|
|
|
|
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
|
|
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
|
|
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
|
|
defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
|
|
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
#else
|
|
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
|
|
#endif
|
|
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
|
|
.phy_reset = true,
|
|
.reset_gpio_port[0] = 57,
|
|
.reset_gpio_port[1] = -EINVAL,
|
|
.reset_gpio_port[2] = -EINVAL
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
/* USB OTG DRVVBUS offset = 0x212 */
|
|
OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
|
|
static struct resource am3517_hecc_resources[] = {
|
|
{
|
|
.start = AM35XX_IPSS_HECC_BASE,
|
|
.end = AM35XX_IPSS_HECC_BASE + 0x3FFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = INT_35XX_HECC0_IRQ,
|
|
.end = INT_35XX_HECC0_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device am3517_hecc_device = {
|
|
.name = "ti_hecc",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(am3517_hecc_resources),
|
|
.resource = am3517_hecc_resources,
|
|
};
|
|
|
|
static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
|
|
.scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET,
|
|
.scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET,
|
|
.hecc_ram_offset = AM35XX_HECC_RAM_OFFSET,
|
|
.mbx_offset = AM35XX_HECC_MBOX_OFFSET,
|
|
.int_line = AM35XX_HECC_INT_LINE,
|
|
.version = AM35XX_HECC_VERSION,
|
|
};
|
|
|
|
static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
|
|
{
|
|
am3517_hecc_device.dev.platform_data = pdata;
|
|
platform_device_register(&am3517_hecc_device);
|
|
}
|
|
|
|
static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
|
|
};
|
|
|
|
static void __init am3517_evm_init(void)
|
|
{
|
|
omap_board_config = am3517_evm_config;
|
|
omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
|
|
|
am3517_evm_i2c_init();
|
|
omap_display_init(&am3517_evm_dss_data);
|
|
omap_serial_init();
|
|
|
|
/* Configure GPIO for EHCI port */
|
|
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
|
|
usbhs_init(&usbhs_bdata);
|
|
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
|
|
/* DSS */
|
|
am3517_evm_display_init();
|
|
|
|
/* RTC - S35390A */
|
|
am3517_evm_rtc_init();
|
|
|
|
i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
|
|
ARRAY_SIZE(am3517evm_i2c1_boardinfo));
|
|
/*Ethernet*/
|
|
am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
|
|
|
|
/* MUSB */
|
|
am3517_evm_musb_init();
|
|
}
|
|
|
|
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
|
|
.boot_params = 0x80000100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = am3517_evm_init_early,
|
|
.init_irq = omap_init_irq,
|
|
.init_machine = am3517_evm_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|