forked from Minki/linux
7caff0fc42
Add a drm_bridge driver for the Toshiba TC358767 DPI/DSI to eDP/DP bridge. Currently only DPI input with 24-bit RGB is supported. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Archit Taneja <architt@codeaurora.org>
1414 lines
36 KiB
C
1414 lines
36 KiB
C
/*
|
|
* tc358767 eDP bridge driver
|
|
*
|
|
* Copyright (C) 2016 CogentEmbedded Inc
|
|
* Author: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
|
|
*
|
|
* Copyright (C) 2016 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
|
|
*
|
|
* Initially based on: drivers/gpu/drm/i2c/tda998x_drv.c
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments
|
|
* Author: Rob Clark <robdclark@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_dp_helper.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drm_of.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
/* Registers */
|
|
|
|
/* Display Parallel Interface */
|
|
#define DPIPXLFMT 0x0440
|
|
#define VS_POL_ACTIVE_LOW (1 << 10)
|
|
#define HS_POL_ACTIVE_LOW (1 << 9)
|
|
#define DE_POL_ACTIVE_HIGH (0 << 8)
|
|
#define SUB_CFG_TYPE_CONFIG1 (0 << 2) /* LSB aligned */
|
|
#define SUB_CFG_TYPE_CONFIG2 (1 << 2) /* Loosely Packed */
|
|
#define SUB_CFG_TYPE_CONFIG3 (2 << 2) /* LSB aligned 8-bit */
|
|
#define DPI_BPP_RGB888 (0 << 0)
|
|
#define DPI_BPP_RGB666 (1 << 0)
|
|
#define DPI_BPP_RGB565 (2 << 0)
|
|
|
|
/* Video Path */
|
|
#define VPCTRL0 0x0450
|
|
#define OPXLFMT_RGB666 (0 << 8)
|
|
#define OPXLFMT_RGB888 (1 << 8)
|
|
#define FRMSYNC_DISABLED (0 << 4) /* Video Timing Gen Disabled */
|
|
#define FRMSYNC_ENABLED (1 << 4) /* Video Timing Gen Enabled */
|
|
#define MSF_DISABLED (0 << 0) /* Magic Square FRC disabled */
|
|
#define MSF_ENABLED (1 << 0) /* Magic Square FRC enabled */
|
|
#define HTIM01 0x0454
|
|
#define HTIM02 0x0458
|
|
#define VTIM01 0x045c
|
|
#define VTIM02 0x0460
|
|
#define VFUEN0 0x0464
|
|
#define VFUEN BIT(0) /* Video Frame Timing Upload */
|
|
|
|
/* System */
|
|
#define TC_IDREG 0x0500
|
|
#define SYSCTRL 0x0510
|
|
#define DP0_AUDSRC_NO_INPUT (0 << 3)
|
|
#define DP0_AUDSRC_I2S_RX (1 << 3)
|
|
#define DP0_VIDSRC_NO_INPUT (0 << 0)
|
|
#define DP0_VIDSRC_DSI_RX (1 << 0)
|
|
#define DP0_VIDSRC_DPI_RX (2 << 0)
|
|
#define DP0_VIDSRC_COLOR_BAR (3 << 0)
|
|
|
|
/* Control */
|
|
#define DP0CTL 0x0600
|
|
#define VID_MN_GEN BIT(6) /* Auto-generate M/N values */
|
|
#define EF_EN BIT(5) /* Enable Enhanced Framing */
|
|
#define VID_EN BIT(1) /* Video transmission enable */
|
|
#define DP_EN BIT(0) /* Enable DPTX function */
|
|
|
|
/* Clocks */
|
|
#define DP0_VIDMNGEN0 0x0610
|
|
#define DP0_VIDMNGEN1 0x0614
|
|
#define DP0_VMNGENSTATUS 0x0618
|
|
|
|
/* Main Channel */
|
|
#define DP0_SECSAMPLE 0x0640
|
|
#define DP0_VIDSYNCDELAY 0x0644
|
|
#define DP0_TOTALVAL 0x0648
|
|
#define DP0_STARTVAL 0x064c
|
|
#define DP0_ACTIVEVAL 0x0650
|
|
#define DP0_SYNCVAL 0x0654
|
|
#define DP0_MISC 0x0658
|
|
#define TU_SIZE_RECOMMENDED (0x3f << 16) /* LSCLK cycles per TU */
|
|
#define BPC_6 (0 << 5)
|
|
#define BPC_8 (1 << 5)
|
|
|
|
/* AUX channel */
|
|
#define DP0_AUXCFG0 0x0660
|
|
#define DP0_AUXCFG1 0x0664
|
|
#define AUX_RX_FILTER_EN BIT(16)
|
|
|
|
#define DP0_AUXADDR 0x0668
|
|
#define DP0_AUXWDATA(i) (0x066c + (i) * 4)
|
|
#define DP0_AUXRDATA(i) (0x067c + (i) * 4)
|
|
#define DP0_AUXSTATUS 0x068c
|
|
#define AUX_STATUS_MASK 0xf0
|
|
#define AUX_STATUS_SHIFT 4
|
|
#define AUX_TIMEOUT BIT(1)
|
|
#define AUX_BUSY BIT(0)
|
|
#define DP0_AUXI2CADR 0x0698
|
|
|
|
/* Link Training */
|
|
#define DP0_SRCCTRL 0x06a0
|
|
#define DP0_SRCCTRL_SCRMBLDIS BIT(13)
|
|
#define DP0_SRCCTRL_EN810B BIT(12)
|
|
#define DP0_SRCCTRL_NOTP (0 << 8)
|
|
#define DP0_SRCCTRL_TP1 (1 << 8)
|
|
#define DP0_SRCCTRL_TP2 (2 << 8)
|
|
#define DP0_SRCCTRL_LANESKEW BIT(7)
|
|
#define DP0_SRCCTRL_SSCG BIT(3)
|
|
#define DP0_SRCCTRL_LANES_1 (0 << 2)
|
|
#define DP0_SRCCTRL_LANES_2 (1 << 2)
|
|
#define DP0_SRCCTRL_BW27 (1 << 1)
|
|
#define DP0_SRCCTRL_BW162 (0 << 1)
|
|
#define DP0_SRCCTRL_AUTOCORRECT BIT(0)
|
|
#define DP0_LTSTAT 0x06d0
|
|
#define LT_LOOPDONE BIT(13)
|
|
#define LT_STATUS_MASK (0x1f << 8)
|
|
#define LT_CHANNEL1_EQ_BITS (DP_CHANNEL_EQ_BITS << 4)
|
|
#define LT_INTERLANE_ALIGN_DONE BIT(3)
|
|
#define LT_CHANNEL0_EQ_BITS (DP_CHANNEL_EQ_BITS)
|
|
#define DP0_SNKLTCHGREQ 0x06d4
|
|
#define DP0_LTLOOPCTRL 0x06d8
|
|
#define DP0_SNKLTCTRL 0x06e4
|
|
|
|
/* PHY */
|
|
#define DP_PHY_CTRL 0x0800
|
|
#define DP_PHY_RST BIT(28) /* DP PHY Global Soft Reset */
|
|
#define BGREN BIT(25) /* AUX PHY BGR Enable */
|
|
#define PWR_SW_EN BIT(24) /* PHY Power Switch Enable */
|
|
#define PHY_M1_RST BIT(12) /* Reset PHY1 Main Channel */
|
|
#define PHY_RDY BIT(16) /* PHY Main Channels Ready */
|
|
#define PHY_M0_RST BIT(8) /* Reset PHY0 Main Channel */
|
|
#define PHY_A0_EN BIT(1) /* PHY Aux Channel0 Enable */
|
|
#define PHY_M0_EN BIT(0) /* PHY Main Channel0 Enable */
|
|
|
|
/* PLL */
|
|
#define DP0_PLLCTRL 0x0900
|
|
#define DP1_PLLCTRL 0x0904 /* not defined in DS */
|
|
#define PXL_PLLCTRL 0x0908
|
|
#define PLLUPDATE BIT(2)
|
|
#define PLLBYP BIT(1)
|
|
#define PLLEN BIT(0)
|
|
#define PXL_PLLPARAM 0x0914
|
|
#define IN_SEL_REFCLK (0 << 14)
|
|
#define SYS_PLLPARAM 0x0918
|
|
#define REF_FREQ_38M4 (0 << 8) /* 38.4 MHz */
|
|
#define REF_FREQ_19M2 (1 << 8) /* 19.2 MHz */
|
|
#define REF_FREQ_26M (2 << 8) /* 26 MHz */
|
|
#define REF_FREQ_13M (3 << 8) /* 13 MHz */
|
|
#define SYSCLK_SEL_LSCLK (0 << 4)
|
|
#define LSCLK_DIV_1 (0 << 0)
|
|
#define LSCLK_DIV_2 (1 << 0)
|
|
|
|
/* Test & Debug */
|
|
#define TSTCTL 0x0a00
|
|
#define PLL_DBG 0x0a04
|
|
|
|
static bool tc_test_pattern;
|
|
module_param_named(test, tc_test_pattern, bool, 0644);
|
|
|
|
struct tc_edp_link {
|
|
struct drm_dp_link base;
|
|
u8 assr;
|
|
int scrambler_dis;
|
|
int spread;
|
|
int coding8b10b;
|
|
u8 swing;
|
|
u8 preemp;
|
|
};
|
|
|
|
struct tc_data {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct drm_dp_aux aux;
|
|
|
|
struct drm_bridge bridge;
|
|
struct drm_connector connector;
|
|
struct drm_panel *panel;
|
|
|
|
/* link settings */
|
|
struct tc_edp_link link;
|
|
|
|
/* display edid */
|
|
struct edid *edid;
|
|
/* current mode */
|
|
struct drm_display_mode *mode;
|
|
|
|
u32 rev;
|
|
u8 assr;
|
|
|
|
struct gpio_desc *sd_gpio;
|
|
struct gpio_desc *reset_gpio;
|
|
struct clk *refclk;
|
|
};
|
|
|
|
static inline struct tc_data *aux_to_tc(struct drm_dp_aux *a)
|
|
{
|
|
return container_of(a, struct tc_data, aux);
|
|
}
|
|
|
|
static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
|
|
{
|
|
return container_of(b, struct tc_data, bridge);
|
|
}
|
|
|
|
static inline struct tc_data *connector_to_tc(struct drm_connector *c)
|
|
{
|
|
return container_of(c, struct tc_data, connector);
|
|
}
|
|
|
|
/* Simple macros to avoid repeated error checks */
|
|
#define tc_write(reg, var) \
|
|
do { \
|
|
ret = regmap_write(tc->regmap, reg, var); \
|
|
if (ret) \
|
|
goto err; \
|
|
} while (0)
|
|
#define tc_read(reg, var) \
|
|
do { \
|
|
ret = regmap_read(tc->regmap, reg, var); \
|
|
if (ret) \
|
|
goto err; \
|
|
} while (0)
|
|
|
|
static inline int tc_poll_timeout(struct regmap *map, unsigned int addr,
|
|
unsigned int cond_mask,
|
|
unsigned int cond_value,
|
|
unsigned long sleep_us, u64 timeout_us)
|
|
{
|
|
ktime_t timeout = ktime_add_us(ktime_get(), timeout_us);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
for (;;) {
|
|
ret = regmap_read(map, addr, &val);
|
|
if (ret)
|
|
break;
|
|
if ((val & cond_mask) == cond_value)
|
|
break;
|
|
if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) {
|
|
ret = regmap_read(map, addr, &val);
|
|
break;
|
|
}
|
|
if (sleep_us)
|
|
usleep_range((sleep_us >> 2) + 1, sleep_us);
|
|
}
|
|
return ret ?: (((val & cond_mask) == cond_value) ? 0 : -ETIMEDOUT);
|
|
}
|
|
|
|
static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
|
|
{
|
|
return tc_poll_timeout(tc->regmap, DP0_AUXSTATUS, AUX_BUSY, 0,
|
|
1000, 1000 * timeout_ms);
|
|
}
|
|
|
|
static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
|
|
{
|
|
int ret;
|
|
u32 value;
|
|
|
|
ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &value);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (value & AUX_BUSY) {
|
|
if (value & AUX_TIMEOUT) {
|
|
dev_err(tc->dev, "i2c access timeout!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return -EBUSY;
|
|
}
|
|
|
|
*reply = (value & AUX_STATUS_MASK) >> AUX_STATUS_SHIFT;
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
|
|
struct drm_dp_aux_msg *msg)
|
|
{
|
|
struct tc_data *tc = aux_to_tc(aux);
|
|
size_t size = min_t(size_t, 8, msg->size);
|
|
u8 request = msg->request & ~DP_AUX_I2C_MOT;
|
|
u8 *buf = msg->buffer;
|
|
u32 tmp = 0;
|
|
int i = 0;
|
|
int ret;
|
|
|
|
if (size == 0)
|
|
return 0;
|
|
|
|
ret = tc_aux_wait_busy(tc, 100);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
|
|
/* Store data */
|
|
while (i < size) {
|
|
if (request == DP_AUX_NATIVE_WRITE)
|
|
tmp = tmp | (buf[i] << (8 * (i & 0x3)));
|
|
else
|
|
tmp = (tmp << 8) | buf[i];
|
|
i++;
|
|
if (((i % 4) == 0) || (i == size)) {
|
|
tc_write(DP0_AUXWDATA(i >> 2), tmp);
|
|
tmp = 0;
|
|
}
|
|
}
|
|
} else if (request != DP_AUX_I2C_READ &&
|
|
request != DP_AUX_NATIVE_READ) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Store address */
|
|
tc_write(DP0_AUXADDR, msg->address);
|
|
/* Start transfer */
|
|
tc_write(DP0_AUXCFG0, ((size - 1) << 8) | request);
|
|
|
|
ret = tc_aux_wait_busy(tc, 100);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = tc_aux_get_status(tc, &msg->reply);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
|
|
/* Read data */
|
|
while (i < size) {
|
|
if ((i % 4) == 0)
|
|
tc_read(DP0_AUXRDATA(i >> 2), &tmp);
|
|
buf[i] = tmp & 0xff;
|
|
tmp = tmp >> 8;
|
|
i++;
|
|
}
|
|
}
|
|
|
|
return size;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static const char * const training_pattern1_errors[] = {
|
|
"No errors",
|
|
"Aux write error",
|
|
"Aux read error",
|
|
"Max voltage reached error",
|
|
"Loop counter expired error",
|
|
"res", "res", "res"
|
|
};
|
|
|
|
static const char * const training_pattern2_errors[] = {
|
|
"No errors",
|
|
"Aux write error",
|
|
"Aux read error",
|
|
"Clock recovery failed error",
|
|
"Loop counter expired error",
|
|
"res", "res", "res"
|
|
};
|
|
|
|
static u32 tc_srcctrl(struct tc_data *tc)
|
|
{
|
|
/*
|
|
* No training pattern, skew lane 1 data by two LSCLK cycles with
|
|
* respect to lane 0 data, AutoCorrect Mode = 0
|
|
*/
|
|
u32 reg = DP0_SRCCTRL_NOTP | DP0_SRCCTRL_LANESKEW;
|
|
|
|
if (tc->link.scrambler_dis)
|
|
reg |= DP0_SRCCTRL_SCRMBLDIS; /* Scrambler Disabled */
|
|
if (tc->link.coding8b10b)
|
|
/* Enable 8/10B Encoder (TxData[19:16] not used) */
|
|
reg |= DP0_SRCCTRL_EN810B;
|
|
if (tc->link.spread)
|
|
reg |= DP0_SRCCTRL_SSCG; /* Spread Spectrum Enable */
|
|
if (tc->link.base.num_lanes == 2)
|
|
reg |= DP0_SRCCTRL_LANES_2; /* Two Main Channel Lanes */
|
|
if (tc->link.base.rate != 162000)
|
|
reg |= DP0_SRCCTRL_BW27; /* 2.7 Gbps link */
|
|
return reg;
|
|
}
|
|
|
|
static void tc_wait_pll_lock(struct tc_data *tc)
|
|
{
|
|
/* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
|
|
usleep_range(3000, 6000);
|
|
}
|
|
|
|
static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
|
|
{
|
|
int ret;
|
|
int i_pre, best_pre = 1;
|
|
int i_post, best_post = 1;
|
|
int div, best_div = 1;
|
|
int mul, best_mul = 1;
|
|
int delta, best_delta;
|
|
int ext_div[] = {1, 2, 3, 5, 7};
|
|
int best_pixelclock = 0;
|
|
int vco_hi = 0;
|
|
|
|
dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
|
|
refclk);
|
|
best_delta = pixelclock;
|
|
/* Loop over all possible ext_divs, skipping invalid configurations */
|
|
for (i_pre = 0; i_pre < ARRAY_SIZE(ext_div); i_pre++) {
|
|
/*
|
|
* refclk / ext_pre_div should be in the 1 to 200 MHz range.
|
|
* We don't allow any refclk > 200 MHz, only check lower bounds.
|
|
*/
|
|
if (refclk / ext_div[i_pre] < 1000000)
|
|
continue;
|
|
for (i_post = 0; i_post < ARRAY_SIZE(ext_div); i_post++) {
|
|
for (div = 1; div <= 16; div++) {
|
|
u32 clk;
|
|
u64 tmp;
|
|
|
|
tmp = pixelclock * ext_div[i_pre] *
|
|
ext_div[i_post] * div;
|
|
do_div(tmp, refclk);
|
|
mul = tmp;
|
|
|
|
/* Check limits */
|
|
if ((mul < 1) || (mul > 128))
|
|
continue;
|
|
|
|
clk = (refclk / ext_div[i_pre] / div) * mul;
|
|
/*
|
|
* refclk * mul / (ext_pre_div * pre_div)
|
|
* should be in the 150 to 650 MHz range
|
|
*/
|
|
if ((clk > 650000000) || (clk < 150000000))
|
|
continue;
|
|
|
|
clk = clk / ext_div[i_post];
|
|
delta = clk - pixelclock;
|
|
|
|
if (abs(delta) < abs(best_delta)) {
|
|
best_pre = i_pre;
|
|
best_post = i_post;
|
|
best_div = div;
|
|
best_mul = mul;
|
|
best_delta = delta;
|
|
best_pixelclock = clk;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (best_pixelclock == 0) {
|
|
dev_err(tc->dev, "Failed to calc clock for %d pixelclock\n",
|
|
pixelclock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(tc->dev, "PLL: got %d, delta %d\n", best_pixelclock,
|
|
best_delta);
|
|
dev_dbg(tc->dev, "PLL: %d / %d / %d * %d / %d\n", refclk,
|
|
ext_div[best_pre], best_div, best_mul, ext_div[best_post]);
|
|
|
|
/* if VCO >= 300 MHz */
|
|
if (refclk / ext_div[best_pre] / best_div * best_mul >= 300000000)
|
|
vco_hi = 1;
|
|
/* see DS */
|
|
if (best_div == 16)
|
|
best_div = 0;
|
|
if (best_mul == 128)
|
|
best_mul = 0;
|
|
|
|
/* Power up PLL and switch to bypass */
|
|
tc_write(PXL_PLLCTRL, PLLBYP | PLLEN);
|
|
|
|
tc_write(PXL_PLLPARAM,
|
|
(vco_hi << 24) | /* For PLL VCO >= 300 MHz = 1 */
|
|
(ext_div[best_pre] << 20) | /* External Pre-divider */
|
|
(ext_div[best_post] << 16) | /* External Post-divider */
|
|
IN_SEL_REFCLK | /* Use RefClk as PLL input */
|
|
(best_div << 8) | /* Divider for PLL RefClk */
|
|
(best_mul << 0)); /* Multiplier for PLL */
|
|
|
|
/* Force PLL parameter update and disable bypass */
|
|
tc_write(PXL_PLLCTRL, PLLUPDATE | PLLEN);
|
|
|
|
tc_wait_pll_lock(tc);
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int tc_pxl_pll_dis(struct tc_data *tc)
|
|
{
|
|
/* Enable PLL bypass, power down PLL */
|
|
return regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP);
|
|
}
|
|
|
|
static int tc_stream_clock_calc(struct tc_data *tc)
|
|
{
|
|
int ret;
|
|
/*
|
|
* If the Stream clock and Link Symbol clock are
|
|
* asynchronous with each other, the value of M changes over
|
|
* time. This way of generating link clock and stream
|
|
* clock is called Asynchronous Clock mode. The value M
|
|
* must change while the value N stays constant. The
|
|
* value of N in this Asynchronous Clock mode must be set
|
|
* to 2^15 or 32,768.
|
|
*
|
|
* LSCLK = 1/10 of high speed link clock
|
|
*
|
|
* f_STRMCLK = M/N * f_LSCLK
|
|
* M/N = f_STRMCLK / f_LSCLK
|
|
*
|
|
*/
|
|
tc_write(DP0_VIDMNGEN1, 32768);
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int tc_aux_link_setup(struct tc_data *tc)
|
|
{
|
|
unsigned long rate;
|
|
u32 value;
|
|
int ret;
|
|
|
|
rate = clk_get_rate(tc->refclk);
|
|
switch (rate) {
|
|
case 38400000:
|
|
value = REF_FREQ_38M4;
|
|
break;
|
|
case 26000000:
|
|
value = REF_FREQ_26M;
|
|
break;
|
|
case 19200000:
|
|
value = REF_FREQ_19M2;
|
|
break;
|
|
case 13000000:
|
|
value = REF_FREQ_13M;
|
|
break;
|
|
default:
|
|
dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Setup DP-PHY / PLL */
|
|
value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
|
|
tc_write(SYS_PLLPARAM, value);
|
|
|
|
tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN);
|
|
|
|
/*
|
|
* Initially PLLs are in bypass. Force PLL parameter update,
|
|
* disable PLL bypass, enable PLL
|
|
*/
|
|
tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
|
|
tc_wait_pll_lock(tc);
|
|
|
|
tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
|
|
tc_wait_pll_lock(tc);
|
|
|
|
ret = tc_poll_timeout(tc->regmap, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1,
|
|
1000);
|
|
if (ret == -ETIMEDOUT) {
|
|
dev_err(tc->dev, "Timeout waiting for PHY to become ready");
|
|
return ret;
|
|
} else if (ret)
|
|
goto err;
|
|
|
|
/* Setup AUX link */
|
|
tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN |
|
|
(0x06 << 8) | /* Aux Bit Period Calculator Threshold */
|
|
(0x3f << 0)); /* Aux Response Timeout Timer */
|
|
|
|
return 0;
|
|
err:
|
|
dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int tc_get_display_props(struct tc_data *tc)
|
|
{
|
|
int ret;
|
|
/* temp buffer */
|
|
u8 tmp[8];
|
|
|
|
/* Read DP Rx Link Capability */
|
|
ret = drm_dp_link_probe(&tc->aux, &tc->link.base);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
if ((tc->link.base.rate != 162000) && (tc->link.base.rate != 270000))
|
|
goto err_dpcd_inval;
|
|
|
|
ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, tmp);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
tc->link.spread = tmp[0] & BIT(0); /* 0.5% down spread */
|
|
|
|
ret = drm_dp_dpcd_readb(&tc->aux, DP_MAIN_LINK_CHANNEL_CODING, tmp);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
tc->link.coding8b10b = tmp[0] & BIT(0);
|
|
tc->link.scrambler_dis = 0;
|
|
/* read assr */
|
|
ret = drm_dp_dpcd_readb(&tc->aux, DP_EDP_CONFIGURATION_SET, tmp);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
tc->link.assr = tmp[0] & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
|
|
|
|
dev_dbg(tc->dev, "DPCD rev: %d.%d, rate: %s, lanes: %d, framing: %s\n",
|
|
tc->link.base.revision >> 4, tc->link.base.revision & 0x0f,
|
|
(tc->link.base.rate == 162000) ? "1.62Gbps" : "2.7Gbps",
|
|
tc->link.base.num_lanes,
|
|
(tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING) ?
|
|
"enhanced" : "non-enhanced");
|
|
dev_dbg(tc->dev, "ANSI 8B/10B: %d\n", tc->link.coding8b10b);
|
|
dev_dbg(tc->dev, "Display ASSR: %d, TC358767 ASSR: %d\n",
|
|
tc->link.assr, tc->assr);
|
|
|
|
return 0;
|
|
|
|
err_dpcd_read:
|
|
dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
|
|
return ret;
|
|
err_dpcd_inval:
|
|
dev_err(tc->dev, "invalid DPCD\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
|
|
{
|
|
int ret;
|
|
int vid_sync_dly;
|
|
int max_tu_symbol;
|
|
|
|
int left_margin = mode->htotal - mode->hsync_end;
|
|
int right_margin = mode->hsync_start - mode->hdisplay;
|
|
int hsync_len = mode->hsync_end - mode->hsync_start;
|
|
int upper_margin = mode->vtotal - mode->vsync_end;
|
|
int lower_margin = mode->vsync_start - mode->vdisplay;
|
|
int vsync_len = mode->vsync_end - mode->vsync_start;
|
|
|
|
dev_dbg(tc->dev, "set mode %dx%d\n",
|
|
mode->hdisplay, mode->vdisplay);
|
|
dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
|
|
left_margin, right_margin, hsync_len);
|
|
dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
|
|
upper_margin, lower_margin, vsync_len);
|
|
dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
|
|
|
|
|
|
/* LCD Ctl Frame Size */
|
|
tc_write(VPCTRL0, (0x40 << 20) /* VSDELAY */ |
|
|
OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
|
|
tc_write(HTIM01, (left_margin << 16) | /* H back porch */
|
|
(hsync_len << 0)); /* Hsync */
|
|
tc_write(HTIM02, (right_margin << 16) | /* H front porch */
|
|
(mode->hdisplay << 0)); /* width */
|
|
tc_write(VTIM01, (upper_margin << 16) | /* V back porch */
|
|
(vsync_len << 0)); /* Vsync */
|
|
tc_write(VTIM02, (lower_margin << 16) | /* V front porch */
|
|
(mode->vdisplay << 0)); /* height */
|
|
tc_write(VFUEN0, VFUEN); /* update settings */
|
|
|
|
/* Test pattern settings */
|
|
tc_write(TSTCTL,
|
|
(120 << 24) | /* Red Color component value */
|
|
(20 << 16) | /* Green Color component value */
|
|
(99 << 8) | /* Blue Color component value */
|
|
(1 << 4) | /* Enable I2C Filter */
|
|
(2 << 0) | /* Color bar Mode */
|
|
0);
|
|
|
|
/* DP Main Stream Attributes */
|
|
vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
|
|
tc_write(DP0_VIDSYNCDELAY,
|
|
(0x003e << 16) | /* thresh_dly */
|
|
(vid_sync_dly << 0));
|
|
|
|
tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
|
|
|
|
tc_write(DP0_STARTVAL,
|
|
((upper_margin + vsync_len) << 16) |
|
|
((left_margin + hsync_len) << 0));
|
|
|
|
tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
|
|
|
|
tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
|
|
|
|
tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
|
|
DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
|
|
|
|
/*
|
|
* Recommended maximum number of symbols transferred in a transfer unit:
|
|
* DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
|
|
* (output active video bandwidth in bytes))
|
|
* Must be less than tu_size.
|
|
*/
|
|
max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
|
|
tc_write(DP0_MISC, (max_tu_symbol << 23) | TU_SIZE_RECOMMENDED | BPC_8);
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int tc_link_training(struct tc_data *tc, int pattern)
|
|
{
|
|
const char * const *errors;
|
|
u32 srcctrl = tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
|
|
DP0_SRCCTRL_AUTOCORRECT;
|
|
int timeout;
|
|
int retry;
|
|
u32 value;
|
|
int ret;
|
|
|
|
if (pattern == DP_TRAINING_PATTERN_1) {
|
|
srcctrl |= DP0_SRCCTRL_TP1;
|
|
errors = training_pattern1_errors;
|
|
} else {
|
|
srcctrl |= DP0_SRCCTRL_TP2;
|
|
errors = training_pattern2_errors;
|
|
}
|
|
|
|
/* Set DPCD 0x102 for Training Part 1 or 2 */
|
|
tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE | pattern);
|
|
|
|
tc_write(DP0_LTLOOPCTRL,
|
|
(0x0f << 28) | /* Defer Iteration Count */
|
|
(0x0f << 24) | /* Loop Iteration Count */
|
|
(0x0d << 0)); /* Loop Timer Delay */
|
|
|
|
retry = 5;
|
|
do {
|
|
/* Set DP0 Training Pattern */
|
|
tc_write(DP0_SRCCTRL, srcctrl);
|
|
|
|
/* Enable DP0 to start Link Training */
|
|
tc_write(DP0CTL, DP_EN);
|
|
|
|
/* wait */
|
|
timeout = 1000;
|
|
do {
|
|
tc_read(DP0_LTSTAT, &value);
|
|
udelay(1);
|
|
} while ((!(value & LT_LOOPDONE)) && (--timeout));
|
|
if (timeout == 0) {
|
|
dev_err(tc->dev, "Link training timeout!\n");
|
|
} else {
|
|
int pattern = (value >> 11) & 0x3;
|
|
int error = (value >> 8) & 0x7;
|
|
|
|
dev_dbg(tc->dev,
|
|
"Link training phase %d done after %d uS: %s\n",
|
|
pattern, 1000 - timeout, errors[error]);
|
|
if (pattern == DP_TRAINING_PATTERN_1 && error == 0)
|
|
break;
|
|
if (pattern == DP_TRAINING_PATTERN_2) {
|
|
value &= LT_CHANNEL1_EQ_BITS |
|
|
LT_INTERLANE_ALIGN_DONE |
|
|
LT_CHANNEL0_EQ_BITS;
|
|
/* in case of two lanes */
|
|
if ((tc->link.base.num_lanes == 2) &&
|
|
(value == (LT_CHANNEL1_EQ_BITS |
|
|
LT_INTERLANE_ALIGN_DONE |
|
|
LT_CHANNEL0_EQ_BITS)))
|
|
break;
|
|
/* in case of one line */
|
|
if ((tc->link.base.num_lanes == 1) &&
|
|
(value == (LT_INTERLANE_ALIGN_DONE |
|
|
LT_CHANNEL0_EQ_BITS)))
|
|
break;
|
|
}
|
|
}
|
|
/* restart */
|
|
tc_write(DP0CTL, 0);
|
|
usleep_range(10, 20);
|
|
} while (--retry);
|
|
if (retry == 0) {
|
|
dev_err(tc->dev, "Failed to finish training phase %d\n",
|
|
pattern);
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int tc_main_link_setup(struct tc_data *tc)
|
|
{
|
|
struct drm_dp_aux *aux = &tc->aux;
|
|
struct device *dev = tc->dev;
|
|
unsigned int rate;
|
|
u32 dp_phy_ctrl;
|
|
int timeout;
|
|
bool aligned;
|
|
bool ready;
|
|
u32 value;
|
|
int ret;
|
|
u8 tmp[8];
|
|
|
|
/* display mode should be set at this point */
|
|
if (!tc->mode)
|
|
return -EINVAL;
|
|
|
|
/* from excel file - DP0_SrcCtrl */
|
|
tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
|
|
DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
|
|
DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
|
|
/* from excel file - DP1_SrcCtrl */
|
|
tc_write(0x07a0, 0x00003083);
|
|
|
|
rate = clk_get_rate(tc->refclk);
|
|
switch (rate) {
|
|
case 38400000:
|
|
value = REF_FREQ_38M4;
|
|
break;
|
|
case 26000000:
|
|
value = REF_FREQ_26M;
|
|
break;
|
|
case 19200000:
|
|
value = REF_FREQ_19M2;
|
|
break;
|
|
case 13000000:
|
|
value = REF_FREQ_13M;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
|
|
tc_write(SYS_PLLPARAM, value);
|
|
/* Setup Main Link */
|
|
dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN | PHY_M0_EN;
|
|
tc_write(DP_PHY_CTRL, dp_phy_ctrl);
|
|
msleep(100);
|
|
|
|
/* PLL setup */
|
|
tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
|
|
tc_wait_pll_lock(tc);
|
|
|
|
tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
|
|
tc_wait_pll_lock(tc);
|
|
|
|
/* PXL PLL setup */
|
|
if (tc_test_pattern) {
|
|
ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
|
|
1000 * tc->mode->clock);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* Reset/Enable Main Links */
|
|
dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
|
|
tc_write(DP_PHY_CTRL, dp_phy_ctrl);
|
|
usleep_range(100, 200);
|
|
dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
|
|
tc_write(DP_PHY_CTRL, dp_phy_ctrl);
|
|
|
|
timeout = 1000;
|
|
do {
|
|
tc_read(DP_PHY_CTRL, &value);
|
|
udelay(1);
|
|
} while ((!(value & PHY_RDY)) && (--timeout));
|
|
|
|
if (timeout == 0) {
|
|
dev_err(dev, "timeout waiting for phy become ready");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Set misc: 8 bits per color */
|
|
ret = regmap_update_bits(tc->regmap, DP0_MISC, BPC_8, BPC_8);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/*
|
|
* ASSR mode
|
|
* on TC358767 side ASSR configured through strap pin
|
|
* seems there is no way to change this setting from SW
|
|
*
|
|
* check is tc configured for same mode
|
|
*/
|
|
if (tc->assr != tc->link.assr) {
|
|
dev_dbg(dev, "Trying to set display to ASSR: %d\n",
|
|
tc->assr);
|
|
/* try to set ASSR on display side */
|
|
tmp[0] = tc->assr;
|
|
ret = drm_dp_dpcd_writeb(aux, DP_EDP_CONFIGURATION_SET, tmp[0]);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
/* read back */
|
|
ret = drm_dp_dpcd_readb(aux, DP_EDP_CONFIGURATION_SET, tmp);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
|
|
if (tmp[0] != tc->assr) {
|
|
dev_warn(dev, "Failed to switch display ASSR to %d, falling back to unscrambled mode\n",
|
|
tc->assr);
|
|
/* trying with disabled scrambler */
|
|
tc->link.scrambler_dis = 1;
|
|
}
|
|
}
|
|
|
|
/* Setup Link & DPRx Config for Training */
|
|
ret = drm_dp_link_configure(aux, &tc->link.base);
|
|
if (ret < 0)
|
|
goto err_dpcd_write;
|
|
|
|
/* DOWNSPREAD_CTRL */
|
|
tmp[0] = tc->link.spread ? DP_SPREAD_AMP_0_5 : 0x00;
|
|
/* MAIN_LINK_CHANNEL_CODING_SET */
|
|
tmp[1] = tc->link.coding8b10b ? DP_SET_ANSI_8B10B : 0x00;
|
|
ret = drm_dp_dpcd_write(aux, DP_DOWNSPREAD_CTRL, tmp, 2);
|
|
if (ret < 0)
|
|
goto err_dpcd_write;
|
|
|
|
ret = tc_link_training(tc, DP_TRAINING_PATTERN_1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = tc_link_training(tc, DP_TRAINING_PATTERN_2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Clear DPCD 0x102 */
|
|
/* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
|
|
tmp[0] = tc->link.scrambler_dis ? DP_LINK_SCRAMBLING_DISABLE : 0x00;
|
|
ret = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET, tmp[0]);
|
|
if (ret < 0)
|
|
goto err_dpcd_write;
|
|
|
|
/* Clear Training Pattern, set AutoCorrect Mode = 1 */
|
|
tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_AUTOCORRECT);
|
|
|
|
/* Wait */
|
|
timeout = 100;
|
|
do {
|
|
udelay(1);
|
|
/* Read DPCD 0x202-0x207 */
|
|
ret = drm_dp_dpcd_read_link_status(aux, tmp + 2);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
ready = (tmp[2] == ((DP_CHANNEL_EQ_BITS << 4) | /* Lane1 */
|
|
DP_CHANNEL_EQ_BITS)); /* Lane0 */
|
|
aligned = tmp[4] & DP_INTERLANE_ALIGN_DONE;
|
|
} while ((--timeout) && !(ready && aligned));
|
|
|
|
if (timeout == 0) {
|
|
/* Read DPCD 0x200-0x201 */
|
|
ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT, tmp, 2);
|
|
if (ret < 0)
|
|
goto err_dpcd_read;
|
|
dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
|
|
dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
|
|
tmp[1]);
|
|
dev_info(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n", tmp[2]);
|
|
dev_info(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n",
|
|
tmp[4]);
|
|
dev_info(dev, "0x0205 SINK_STATUS: 0x%02x\n", tmp[5]);
|
|
dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
|
|
tmp[6]);
|
|
|
|
if (!ready)
|
|
dev_err(dev, "Lane0/1 not ready\n");
|
|
if (!aligned)
|
|
dev_err(dev, "Lane0/1 not aligned\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
ret = tc_set_video_mode(tc, tc->mode);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Set M/N */
|
|
ret = tc_stream_clock_calc(tc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err_dpcd_read:
|
|
dev_err(tc->dev, "Failed to read DPCD: %d\n", ret);
|
|
return ret;
|
|
err_dpcd_write:
|
|
dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int tc_main_link_stream(struct tc_data *tc, int state)
|
|
{
|
|
int ret;
|
|
u32 value;
|
|
|
|
dev_dbg(tc->dev, "stream: %d\n", state);
|
|
|
|
if (state) {
|
|
value = VID_MN_GEN | DP_EN;
|
|
if (tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
|
|
value |= EF_EN;
|
|
tc_write(DP0CTL, value);
|
|
/*
|
|
* VID_EN assertion should be delayed by at least N * LSCLK
|
|
* cycles from the time VID_MN_GEN is enabled in order to
|
|
* generate stable values for VID_M. LSCLK is 270 MHz or
|
|
* 162 MHz, VID_N is set to 32768 in tc_stream_clock_calc(),
|
|
* so a delay of at least 203 us should suffice.
|
|
*/
|
|
usleep_range(500, 1000);
|
|
value |= VID_EN;
|
|
tc_write(DP0CTL, value);
|
|
/* Set input interface */
|
|
value = DP0_AUDSRC_NO_INPUT;
|
|
if (tc_test_pattern)
|
|
value |= DP0_VIDSRC_COLOR_BAR;
|
|
else
|
|
value |= DP0_VIDSRC_DPI_RX;
|
|
tc_write(SYSCTRL, value);
|
|
} else {
|
|
tc_write(DP0CTL, 0);
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
tc_connector_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
return connector_status_connected;
|
|
}
|
|
|
|
static void tc_bridge_pre_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct tc_data *tc = bridge_to_tc(bridge);
|
|
|
|
drm_panel_prepare(tc->panel);
|
|
}
|
|
|
|
static void tc_bridge_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct tc_data *tc = bridge_to_tc(bridge);
|
|
int ret;
|
|
|
|
ret = tc_main_link_setup(tc);
|
|
if (ret < 0) {
|
|
dev_err(tc->dev, "main link setup error: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
ret = tc_main_link_stream(tc, 1);
|
|
if (ret < 0) {
|
|
dev_err(tc->dev, "main link stream start error: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
drm_panel_enable(tc->panel);
|
|
}
|
|
|
|
static void tc_bridge_disable(struct drm_bridge *bridge)
|
|
{
|
|
struct tc_data *tc = bridge_to_tc(bridge);
|
|
int ret;
|
|
|
|
drm_panel_disable(tc->panel);
|
|
|
|
ret = tc_main_link_stream(tc, 0);
|
|
if (ret < 0)
|
|
dev_err(tc->dev, "main link stream stop error: %d\n", ret);
|
|
}
|
|
|
|
static void tc_bridge_post_disable(struct drm_bridge *bridge)
|
|
{
|
|
struct tc_data *tc = bridge_to_tc(bridge);
|
|
|
|
drm_panel_unprepare(tc->panel);
|
|
}
|
|
|
|
static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adj)
|
|
{
|
|
/* Fixup sync polarities, both hsync and vsync are active low */
|
|
adj->flags = mode->flags;
|
|
adj->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
|
|
adj->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int tc_connector_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
/* Accept any mode */
|
|
return MODE_OK;
|
|
}
|
|
|
|
static void tc_bridge_mode_set(struct drm_bridge *bridge,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adj)
|
|
{
|
|
struct tc_data *tc = bridge_to_tc(bridge);
|
|
|
|
tc->mode = mode;
|
|
}
|
|
|
|
static int tc_connector_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct tc_data *tc = connector_to_tc(connector);
|
|
struct edid *edid;
|
|
unsigned int count;
|
|
|
|
if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) {
|
|
count = tc->panel->funcs->get_modes(tc->panel);
|
|
if (count > 0)
|
|
return count;
|
|
}
|
|
|
|
edid = drm_get_edid(connector, &tc->aux.ddc);
|
|
|
|
kfree(tc->edid);
|
|
tc->edid = edid;
|
|
if (!edid)
|
|
return 0;
|
|
|
|
drm_mode_connector_update_edid_property(connector, edid);
|
|
count = drm_add_edid_modes(connector, edid);
|
|
|
|
return count;
|
|
}
|
|
|
|
static void tc_connector_set_polling(struct tc_data *tc,
|
|
struct drm_connector *connector)
|
|
{
|
|
/* TODO: add support for HPD */
|
|
connector->polled = DRM_CONNECTOR_POLL_CONNECT |
|
|
DRM_CONNECTOR_POLL_DISCONNECT;
|
|
}
|
|
|
|
static struct drm_encoder *
|
|
tc_connector_best_encoder(struct drm_connector *connector)
|
|
{
|
|
struct tc_data *tc = connector_to_tc(connector);
|
|
|
|
return tc->bridge.encoder;
|
|
}
|
|
|
|
static const struct drm_connector_helper_funcs tc_connector_helper_funcs = {
|
|
.get_modes = tc_connector_get_modes,
|
|
.mode_valid = tc_connector_mode_valid,
|
|
.best_encoder = tc_connector_best_encoder,
|
|
};
|
|
|
|
static void tc_connector_destroy(struct drm_connector *connector)
|
|
{
|
|
drm_connector_unregister(connector);
|
|
drm_connector_cleanup(connector);
|
|
}
|
|
|
|
static const struct drm_connector_funcs tc_connector_funcs = {
|
|
.dpms = drm_atomic_helper_connector_dpms,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.detect = tc_connector_detect,
|
|
.destroy = tc_connector_destroy,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static int tc_bridge_attach(struct drm_bridge *bridge)
|
|
{
|
|
u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
|
|
struct tc_data *tc = bridge_to_tc(bridge);
|
|
struct drm_device *drm = bridge->dev;
|
|
int ret;
|
|
|
|
/* Create eDP connector */
|
|
drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
|
|
ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
|
|
DRM_MODE_CONNECTOR_eDP);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (tc->panel)
|
|
drm_panel_attach(tc->panel, &tc->connector);
|
|
|
|
drm_display_info_set_bus_formats(&tc->connector.display_info,
|
|
&bus_format, 1);
|
|
drm_mode_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_bridge_funcs tc_bridge_funcs = {
|
|
.attach = tc_bridge_attach,
|
|
.mode_set = tc_bridge_mode_set,
|
|
.pre_enable = tc_bridge_pre_enable,
|
|
.enable = tc_bridge_enable,
|
|
.disable = tc_bridge_disable,
|
|
.post_disable = tc_bridge_post_disable,
|
|
.mode_fixup = tc_bridge_mode_fixup,
|
|
};
|
|
|
|
static bool tc_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg != SYSCTRL;
|
|
}
|
|
|
|
static const struct regmap_range tc_volatile_ranges[] = {
|
|
regmap_reg_range(DP0_AUXWDATA(0), DP0_AUXSTATUS),
|
|
regmap_reg_range(DP0_LTSTAT, DP0_SNKLTCHGREQ),
|
|
regmap_reg_range(DP_PHY_CTRL, DP_PHY_CTRL),
|
|
regmap_reg_range(DP0_PLLCTRL, PXL_PLLCTRL),
|
|
regmap_reg_range(VFUEN0, VFUEN0),
|
|
};
|
|
|
|
static const struct regmap_access_table tc_volatile_table = {
|
|
.yes_ranges = tc_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(tc_volatile_ranges),
|
|
};
|
|
|
|
static bool tc_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (reg != TC_IDREG) &&
|
|
(reg != DP0_LTSTAT) &&
|
|
(reg != DP0_SNKLTCHGREQ);
|
|
}
|
|
|
|
static const struct regmap_config tc_regmap_config = {
|
|
.name = "tc358767",
|
|
.reg_bits = 16,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = PLL_DBG,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.readable_reg = tc_readable_reg,
|
|
.volatile_table = &tc_volatile_table,
|
|
.writeable_reg = tc_writeable_reg,
|
|
.reg_format_endian = REGMAP_ENDIAN_BIG,
|
|
.val_format_endian = REGMAP_ENDIAN_LITTLE,
|
|
};
|
|
|
|
static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *ep;
|
|
struct tc_data *tc;
|
|
int ret;
|
|
|
|
tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
|
|
if (!tc)
|
|
return -ENOMEM;
|
|
|
|
tc->dev = dev;
|
|
|
|
/* port@2 is the output port */
|
|
ep = of_graph_get_endpoint_by_regs(dev->of_node, 2, -1);
|
|
if (ep) {
|
|
struct device_node *remote;
|
|
|
|
remote = of_graph_get_remote_port_parent(ep);
|
|
if (!remote) {
|
|
dev_warn(dev, "endpoint %s not connected\n",
|
|
ep->full_name);
|
|
of_node_put(ep);
|
|
return -ENODEV;
|
|
}
|
|
of_node_put(ep);
|
|
tc->panel = of_drm_find_panel(remote);
|
|
if (tc->panel) {
|
|
dev_dbg(dev, "found panel %s\n", remote->full_name);
|
|
} else {
|
|
dev_dbg(dev, "waiting for panel %s\n",
|
|
remote->full_name);
|
|
of_node_put(remote);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
of_node_put(remote);
|
|
}
|
|
|
|
/* Shut down GPIO is optional */
|
|
tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(tc->sd_gpio))
|
|
return PTR_ERR(tc->sd_gpio);
|
|
|
|
if (tc->sd_gpio) {
|
|
gpiod_set_value_cansleep(tc->sd_gpio, 0);
|
|
usleep_range(5000, 10000);
|
|
}
|
|
|
|
/* Reset GPIO is optional */
|
|
tc->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(tc->reset_gpio))
|
|
return PTR_ERR(tc->reset_gpio);
|
|
|
|
if (tc->reset_gpio) {
|
|
gpiod_set_value_cansleep(tc->reset_gpio, 1);
|
|
usleep_range(5000, 10000);
|
|
}
|
|
|
|
tc->refclk = devm_clk_get(dev, "ref");
|
|
if (IS_ERR(tc->refclk)) {
|
|
ret = PTR_ERR(tc->refclk);
|
|
dev_err(dev, "Failed to get refclk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config);
|
|
if (IS_ERR(tc->regmap)) {
|
|
ret = PTR_ERR(tc->regmap);
|
|
dev_err(dev, "Failed to initialize regmap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(tc->regmap, TC_IDREG, &tc->rev);
|
|
if (ret) {
|
|
dev_err(tc->dev, "can not read device ID: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if ((tc->rev != 0x6601) && (tc->rev != 0x6603)) {
|
|
dev_err(tc->dev, "invalid device ID: 0x%08x\n", tc->rev);
|
|
return -EINVAL;
|
|
}
|
|
|
|
tc->assr = (tc->rev == 0x6601); /* Enable ASSR for eDP panels */
|
|
|
|
ret = tc_aux_link_setup(tc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Register DP AUX channel */
|
|
tc->aux.name = "TC358767 AUX i2c adapter";
|
|
tc->aux.dev = tc->dev;
|
|
tc->aux.transfer = tc_aux_transfer;
|
|
ret = drm_dp_aux_register(&tc->aux);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tc_get_display_props(tc);
|
|
if (ret)
|
|
goto err_unregister_aux;
|
|
|
|
tc_connector_set_polling(tc, &tc->connector);
|
|
|
|
tc->bridge.funcs = &tc_bridge_funcs;
|
|
tc->bridge.of_node = dev->of_node;
|
|
ret = drm_bridge_add(&tc->bridge);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to add drm_bridge: %d\n", ret);
|
|
goto err_unregister_aux;
|
|
}
|
|
|
|
i2c_set_clientdata(client, tc);
|
|
|
|
return 0;
|
|
err_unregister_aux:
|
|
drm_dp_aux_unregister(&tc->aux);
|
|
return ret;
|
|
}
|
|
|
|
static int tc_remove(struct i2c_client *client)
|
|
{
|
|
struct tc_data *tc = i2c_get_clientdata(client);
|
|
|
|
drm_bridge_remove(&tc->bridge);
|
|
drm_dp_aux_unregister(&tc->aux);
|
|
|
|
tc_pxl_pll_dis(tc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id tc358767_i2c_ids[] = {
|
|
{ "tc358767", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tc358767_i2c_ids);
|
|
|
|
static const struct of_device_id tc358767_of_ids[] = {
|
|
{ .compatible = "toshiba,tc358767", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tc358767_of_ids);
|
|
|
|
static struct i2c_driver tc358767_driver = {
|
|
.driver = {
|
|
.name = "tc358767",
|
|
.of_match_table = tc358767_of_ids,
|
|
},
|
|
.id_table = tc358767_i2c_ids,
|
|
.probe = tc_probe,
|
|
.remove = tc_remove,
|
|
};
|
|
module_i2c_driver(tc358767_driver);
|
|
|
|
MODULE_AUTHOR("Andrey Gusakov <andrey.gusakov@cogentembedded.com>");
|
|
MODULE_DESCRIPTION("tc358767 eDP encoder driver");
|
|
MODULE_LICENSE("GPL");
|