forked from Minki/linux
bdd2648e50
The new CPU clock type allows the use of generic CPUfreq driver. Switch Exynos4x12 to using generic cpufreq driver. Previously (when exynos-cpufreq driver was used with boost functionality) ARM_EXYNOS_CPU_FREQ_BOOST_SW config option (which enabled boost functionality) selected EXYNOS_THERMAL one. After switching Exynos4x12 platforms to use cpufreq-dt driver boost support is enabled in the cpufreq-dt driver itself (because there are turbo OPPs defined in the board's DTS file). However we still would like to allow enabling boost support only if thermal support is also enabled for Exynos platforms. To achieve this make ARCH_EXYNOS config option select THERMAL and EXYNOS_THERMAL ones. Please also note that the switch to use the generic cpufreq-dt driver fixes the minor issue present with the old code (support for 'boost' mode in the exynos-cpufreq driver was enabled for all supported SoCs even though 'boost' frequency was provided only for Exynos4x12 ones). Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
334 lines
8.4 KiB
C
334 lines
8.4 KiB
C
/*
|
|
* SAMSUNG EXYNOS Flattened Device Tree enabled machine
|
|
*
|
|
* Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/serial_s3c.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_fdt.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_domain.h>
|
|
#include <linux/irqchip.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/memory.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "mfc.h"
|
|
#include "regs-pmu.h"
|
|
|
|
void __iomem *pmu_base_addr;
|
|
|
|
static struct map_desc exynos4_iodesc[] __initdata = {
|
|
{
|
|
.virtual = (unsigned long)S5P_VA_SROMC,
|
|
.pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)S5P_VA_CMU,
|
|
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
|
|
.length = SZ_128K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)S5P_VA_COREPERI_BASE,
|
|
.pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
|
|
.length = SZ_8K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)S5P_VA_DMC0,
|
|
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
|
|
.length = SZ_64K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)S5P_VA_DMC1,
|
|
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC1),
|
|
.length = SZ_64K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static struct map_desc exynos5_iodesc[] __initdata = {
|
|
{
|
|
.virtual = (unsigned long)S5P_VA_SROMC,
|
|
.pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)S5P_VA_CMU,
|
|
.pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
|
|
.length = 144 * SZ_1K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static struct platform_device exynos_cpuidle = {
|
|
.name = "exynos_cpuidle",
|
|
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
|
|
.dev.platform_data = exynos_enter_aftr,
|
|
#endif
|
|
.id = -1,
|
|
};
|
|
|
|
void __iomem *sysram_base_addr;
|
|
void __iomem *sysram_ns_base_addr;
|
|
|
|
void __init exynos_sysram_init(void)
|
|
{
|
|
struct device_node *node;
|
|
|
|
for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
|
|
if (!of_device_is_available(node))
|
|
continue;
|
|
sysram_base_addr = of_iomap(node, 0);
|
|
break;
|
|
}
|
|
|
|
for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
|
|
if (!of_device_is_available(node))
|
|
continue;
|
|
sysram_ns_base_addr = of_iomap(node, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __init exynos_init_late(void)
|
|
{
|
|
if (of_machine_is_compatible("samsung,exynos5440"))
|
|
/* to be supported later */
|
|
return;
|
|
|
|
exynos_pm_init();
|
|
}
|
|
|
|
static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
|
|
int depth, void *data)
|
|
{
|
|
struct map_desc iodesc;
|
|
const __be32 *reg;
|
|
int len;
|
|
|
|
if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
|
|
!of_flat_dt_is_compatible(node, "samsung,exynos5440-clock"))
|
|
return 0;
|
|
|
|
reg = of_get_flat_dt_prop(node, "reg", &len);
|
|
if (reg == NULL || len != (sizeof(unsigned long) * 2))
|
|
return 0;
|
|
|
|
iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0]));
|
|
iodesc.length = be32_to_cpu(reg[1]) - 1;
|
|
iodesc.virtual = (unsigned long)S5P_VA_CHIPID;
|
|
iodesc.type = MT_DEVICE;
|
|
iotable_init(&iodesc, 1);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* exynos_map_io
|
|
*
|
|
* register the standard cpu IO areas
|
|
*/
|
|
static void __init exynos_map_io(void)
|
|
{
|
|
if (soc_is_exynos4())
|
|
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
|
|
|
|
if (soc_is_exynos5())
|
|
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
|
|
}
|
|
|
|
static void __init exynos_init_io(void)
|
|
{
|
|
debug_ll_io_init();
|
|
|
|
of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
|
|
|
|
/* detect cpu id and rev. */
|
|
s5p_init_cpu(S5P_VA_CHIPID);
|
|
|
|
exynos_map_io();
|
|
}
|
|
|
|
/*
|
|
* Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
|
|
* and suspend.
|
|
*
|
|
* This is necessary only on Exynos4 SoCs. When system is running
|
|
* USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
|
|
* feature could properly detect global idle state when secondary CPU is
|
|
* powered down.
|
|
*
|
|
* However this should not be set when such system is going into suspend.
|
|
*/
|
|
void exynos_set_delayed_reset_assertion(bool enable)
|
|
{
|
|
if (of_machine_is_compatible("samsung,exynos4")) {
|
|
unsigned int tmp, core_id;
|
|
|
|
for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
|
|
tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
|
|
if (enable)
|
|
tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
|
|
else
|
|
tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
|
|
pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Apparently, these SoCs are not able to wake-up from suspend using
|
|
* the PMU. Too bad. Should they suddenly become capable of such a
|
|
* feat, the matches below should be moved to suspend.c.
|
|
*/
|
|
static const struct of_device_id exynos_dt_pmu_match[] = {
|
|
{ .compatible = "samsung,exynos5260-pmu" },
|
|
{ .compatible = "samsung,exynos5410-pmu" },
|
|
{ /*sentinel*/ },
|
|
};
|
|
|
|
static void exynos_map_pmu(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
np = of_find_matching_node(NULL, exynos_dt_pmu_match);
|
|
if (np)
|
|
pmu_base_addr = of_iomap(np, 0);
|
|
}
|
|
|
|
static void __init exynos_init_irq(void)
|
|
{
|
|
irqchip_init();
|
|
/*
|
|
* Since platsmp.c needs pmu base address by the time
|
|
* DT is not unflatten so we can't use DT APIs before
|
|
* init_irq
|
|
*/
|
|
exynos_map_pmu();
|
|
}
|
|
|
|
static const struct of_device_id exynos_cpufreq_matches[] = {
|
|
{ .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
|
|
{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
|
|
{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
|
|
{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
|
|
{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static void __init exynos_cpufreq_init(void)
|
|
{
|
|
struct device_node *root = of_find_node_by_path("/");
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(exynos_cpufreq_matches, root);
|
|
if (!match) {
|
|
platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
platform_device_register_simple(match->data, -1, NULL, 0);
|
|
}
|
|
|
|
static void __init exynos_dt_machine_init(void)
|
|
{
|
|
/*
|
|
* This is called from smp_prepare_cpus if we've built for SMP, but
|
|
* we still need to set it up for PM and firmware ops if not.
|
|
*/
|
|
if (!IS_ENABLED(CONFIG_SMP))
|
|
exynos_sysram_init();
|
|
|
|
#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
|
|
if (of_machine_is_compatible("samsung,exynos4210") ||
|
|
of_machine_is_compatible("samsung,exynos3250"))
|
|
exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
|
|
#endif
|
|
if (of_machine_is_compatible("samsung,exynos4210") ||
|
|
of_machine_is_compatible("samsung,exynos4212") ||
|
|
(of_machine_is_compatible("samsung,exynos4412") &&
|
|
of_machine_is_compatible("samsung,trats2")) ||
|
|
of_machine_is_compatible("samsung,exynos3250") ||
|
|
of_machine_is_compatible("samsung,exynos5250"))
|
|
platform_device_register(&exynos_cpuidle);
|
|
|
|
exynos_cpufreq_init();
|
|
|
|
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
|
|
}
|
|
|
|
static char const *const exynos_dt_compat[] __initconst = {
|
|
"samsung,exynos3",
|
|
"samsung,exynos3250",
|
|
"samsung,exynos4",
|
|
"samsung,exynos4210",
|
|
"samsung,exynos4212",
|
|
"samsung,exynos4412",
|
|
"samsung,exynos4415",
|
|
"samsung,exynos5",
|
|
"samsung,exynos5250",
|
|
"samsung,exynos5260",
|
|
"samsung,exynos5420",
|
|
"samsung,exynos5440",
|
|
NULL
|
|
};
|
|
|
|
static void __init exynos_reserve(void)
|
|
{
|
|
#ifdef CONFIG_S5P_DEV_MFC
|
|
int i;
|
|
char *mfc_mem[] = {
|
|
"samsung,mfc-v5",
|
|
"samsung,mfc-v6",
|
|
"samsung,mfc-v7",
|
|
"samsung,mfc-v8",
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
|
|
if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
static void __init exynos_dt_fixup(void)
|
|
{
|
|
/*
|
|
* Some versions of uboot pass garbage entries in the memory node,
|
|
* use the old CONFIG_ARM_NR_BANKS
|
|
*/
|
|
of_fdt_limit_memory(8);
|
|
}
|
|
|
|
DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
|
|
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
|
|
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
|
|
.l2c_aux_val = 0x3c400001,
|
|
.l2c_aux_mask = 0xc20fffff,
|
|
.smp = smp_ops(exynos_smp_ops),
|
|
.map_io = exynos_init_io,
|
|
.init_early = exynos_firmware_init,
|
|
.init_irq = exynos_init_irq,
|
|
.init_machine = exynos_dt_machine_init,
|
|
.init_late = exynos_init_late,
|
|
.dt_compat = exynos_dt_compat,
|
|
.reserve = exynos_reserve,
|
|
.dt_fixup = exynos_dt_fixup,
|
|
MACHINE_END
|