forked from Minki/linux
6e0832fa43
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
690 lines
17 KiB
C
690 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/**
|
|
* APM X-Gene PCIe Driver
|
|
*
|
|
* Copyright (c) 2014 Applied Micro Circuits Corporation.
|
|
*
|
|
* Author: Tanmay Inamdar <tinamdar@apm.com>.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/memblock.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci-acpi.h>
|
|
#include <linux/pci-ecam.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../pci.h"
|
|
|
|
#define PCIECORE_CTLANDSTATUS 0x50
|
|
#define PIM1_1L 0x80
|
|
#define IBAR2 0x98
|
|
#define IR2MSK 0x9c
|
|
#define PIM2_1L 0xa0
|
|
#define IBAR3L 0xb4
|
|
#define IR3MSKL 0xbc
|
|
#define PIM3_1L 0xc4
|
|
#define OMR1BARL 0x100
|
|
#define OMR2BARL 0x118
|
|
#define OMR3BARL 0x130
|
|
#define CFGBARL 0x154
|
|
#define CFGBARH 0x158
|
|
#define CFGCTL 0x15c
|
|
#define RTDID 0x160
|
|
#define BRIDGE_CFG_0 0x2000
|
|
#define BRIDGE_CFG_4 0x2010
|
|
#define BRIDGE_STATUS_0 0x2600
|
|
|
|
#define LINK_UP_MASK 0x00000100
|
|
#define AXI_EP_CFG_ACCESS 0x10000
|
|
#define EN_COHERENCY 0xF0000000
|
|
#define EN_REG 0x00000001
|
|
#define OB_LO_IO 0x00000002
|
|
#define XGENE_PCIE_VENDORID 0x10E8
|
|
#define XGENE_PCIE_DEVICEID 0xE004
|
|
#define SZ_1T (SZ_1G*1024ULL)
|
|
#define PIPE_PHY_RATE_RD(src) ((0xc000 & (u32)(src)) >> 0xe)
|
|
|
|
#define XGENE_V1_PCI_EXP_CAP 0x40
|
|
|
|
/* PCIe IP version */
|
|
#define XGENE_PCIE_IP_VER_UNKN 0
|
|
#define XGENE_PCIE_IP_VER_1 1
|
|
#define XGENE_PCIE_IP_VER_2 2
|
|
|
|
#if defined(CONFIG_PCI_XGENE) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
|
|
struct xgene_pcie_port {
|
|
struct device_node *node;
|
|
struct device *dev;
|
|
struct clk *clk;
|
|
void __iomem *csr_base;
|
|
void __iomem *cfg_base;
|
|
unsigned long cfg_addr;
|
|
bool link_up;
|
|
u32 version;
|
|
};
|
|
|
|
static u32 xgene_pcie_readl(struct xgene_pcie_port *port, u32 reg)
|
|
{
|
|
return readl(port->csr_base + reg);
|
|
}
|
|
|
|
static void xgene_pcie_writel(struct xgene_pcie_port *port, u32 reg, u32 val)
|
|
{
|
|
writel(val, port->csr_base + reg);
|
|
}
|
|
|
|
static inline u32 pcie_bar_low_val(u32 addr, u32 flags)
|
|
{
|
|
return (addr & PCI_BASE_ADDRESS_MEM_MASK) | flags;
|
|
}
|
|
|
|
static inline struct xgene_pcie_port *pcie_bus_to_port(struct pci_bus *bus)
|
|
{
|
|
struct pci_config_window *cfg;
|
|
|
|
if (acpi_disabled)
|
|
return (struct xgene_pcie_port *)(bus->sysdata);
|
|
|
|
cfg = bus->sysdata;
|
|
return (struct xgene_pcie_port *)(cfg->priv);
|
|
}
|
|
|
|
/*
|
|
* When the address bit [17:16] is 2'b01, the Configuration access will be
|
|
* treated as Type 1 and it will be forwarded to external PCIe device.
|
|
*/
|
|
static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
|
|
{
|
|
struct xgene_pcie_port *port = pcie_bus_to_port(bus);
|
|
|
|
if (bus->number >= (bus->primary + 1))
|
|
return port->cfg_base + AXI_EP_CFG_ACCESS;
|
|
|
|
return port->cfg_base;
|
|
}
|
|
|
|
/*
|
|
* For Configuration request, RTDID register is used as Bus Number,
|
|
* Device Number and Function number of the header fields.
|
|
*/
|
|
static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
|
|
{
|
|
struct xgene_pcie_port *port = pcie_bus_to_port(bus);
|
|
unsigned int b, d, f;
|
|
u32 rtdid_val = 0;
|
|
|
|
b = bus->number;
|
|
d = PCI_SLOT(devfn);
|
|
f = PCI_FUNC(devfn);
|
|
|
|
if (!pci_is_root_bus(bus))
|
|
rtdid_val = (b << 8) | (d << 3) | f;
|
|
|
|
xgene_pcie_writel(port, RTDID, rtdid_val);
|
|
/* read the register back to ensure flush */
|
|
xgene_pcie_readl(port, RTDID);
|
|
}
|
|
|
|
/*
|
|
* X-Gene PCIe port uses BAR0-BAR1 of RC's configuration space as
|
|
* the translation from PCI bus to native BUS. Entire DDR region
|
|
* is mapped into PCIe space using these registers, so it can be
|
|
* reached by DMA from EP devices. The BAR0/1 of bridge should be
|
|
* hidden during enumeration to avoid the sizing and resource allocation
|
|
* by PCIe core.
|
|
*/
|
|
static bool xgene_pcie_hide_rc_bars(struct pci_bus *bus, int offset)
|
|
{
|
|
if (pci_is_root_bus(bus) && ((offset == PCI_BASE_ADDRESS_0) ||
|
|
(offset == PCI_BASE_ADDRESS_1)))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static void __iomem *xgene_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
|
|
int offset)
|
|
{
|
|
if ((pci_is_root_bus(bus) && devfn != 0) ||
|
|
xgene_pcie_hide_rc_bars(bus, offset))
|
|
return NULL;
|
|
|
|
xgene_pcie_set_rtdid_reg(bus, devfn);
|
|
return xgene_pcie_get_cfg_base(bus) + offset;
|
|
}
|
|
|
|
static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
struct xgene_pcie_port *port = pcie_bus_to_port(bus);
|
|
|
|
if (pci_generic_config_read32(bus, devfn, where & ~0x3, 4, val) !=
|
|
PCIBIOS_SUCCESSFUL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/*
|
|
* The v1 controller has a bug in its Configuration Request
|
|
* Retry Status (CRS) logic: when CRS is enabled and we read the
|
|
* Vendor and Device ID of a non-existent device, the controller
|
|
* fabricates return data of 0xFFFF0001 ("device exists but is not
|
|
* ready") instead of 0xFFFFFFFF ("device does not exist"). This
|
|
* causes the PCI core to retry the read until it times out.
|
|
* Avoid this by not claiming to support CRS.
|
|
*/
|
|
if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
|
|
((where & ~0x3) == XGENE_V1_PCI_EXP_CAP + PCI_EXP_RTCTL))
|
|
*val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
|
|
|
|
if (size <= 2)
|
|
*val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
|
|
static int xgene_get_csr_resource(struct acpi_device *adev,
|
|
struct resource *res)
|
|
{
|
|
struct device *dev = &adev->dev;
|
|
struct resource_entry *entry;
|
|
struct list_head list;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
INIT_LIST_HEAD(&list);
|
|
flags = IORESOURCE_MEM;
|
|
ret = acpi_dev_get_resources(adev, &list,
|
|
acpi_dev_filter_resource_type_cb,
|
|
(void *) flags);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to parse _CRS method, error code %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
if (ret == 0) {
|
|
dev_err(dev, "no IO and memory resources present in _CRS\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
entry = list_first_entry(&list, struct resource_entry, node);
|
|
*res = *entry->res;
|
|
acpi_dev_free_resource_list(&list);
|
|
return 0;
|
|
}
|
|
|
|
static int xgene_pcie_ecam_init(struct pci_config_window *cfg, u32 ipversion)
|
|
{
|
|
struct device *dev = cfg->parent;
|
|
struct acpi_device *adev = to_acpi_device(dev);
|
|
struct xgene_pcie_port *port;
|
|
struct resource csr;
|
|
int ret;
|
|
|
|
port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
|
|
if (!port)
|
|
return -ENOMEM;
|
|
|
|
ret = xgene_get_csr_resource(adev, &csr);
|
|
if (ret) {
|
|
dev_err(dev, "can't get CSR resource\n");
|
|
return ret;
|
|
}
|
|
port->csr_base = devm_pci_remap_cfg_resource(dev, &csr);
|
|
if (IS_ERR(port->csr_base))
|
|
return PTR_ERR(port->csr_base);
|
|
|
|
port->cfg_base = cfg->win;
|
|
port->version = ipversion;
|
|
|
|
cfg->priv = port;
|
|
return 0;
|
|
}
|
|
|
|
static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
|
|
{
|
|
return xgene_pcie_ecam_init(cfg, XGENE_PCIE_IP_VER_1);
|
|
}
|
|
|
|
struct pci_ecam_ops xgene_v1_pcie_ecam_ops = {
|
|
.bus_shift = 16,
|
|
.init = xgene_v1_pcie_ecam_init,
|
|
.pci_ops = {
|
|
.map_bus = xgene_pcie_map_bus,
|
|
.read = xgene_pcie_config_read32,
|
|
.write = pci_generic_config_write,
|
|
}
|
|
};
|
|
|
|
static int xgene_v2_pcie_ecam_init(struct pci_config_window *cfg)
|
|
{
|
|
return xgene_pcie_ecam_init(cfg, XGENE_PCIE_IP_VER_2);
|
|
}
|
|
|
|
struct pci_ecam_ops xgene_v2_pcie_ecam_ops = {
|
|
.bus_shift = 16,
|
|
.init = xgene_v2_pcie_ecam_init,
|
|
.pci_ops = {
|
|
.map_bus = xgene_pcie_map_bus,
|
|
.read = xgene_pcie_config_read32,
|
|
.write = pci_generic_config_write,
|
|
}
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI_XGENE)
|
|
static u64 xgene_pcie_set_ib_mask(struct xgene_pcie_port *port, u32 addr,
|
|
u32 flags, u64 size)
|
|
{
|
|
u64 mask = (~(size - 1) & PCI_BASE_ADDRESS_MEM_MASK) | flags;
|
|
u32 val32 = 0;
|
|
u32 val;
|
|
|
|
val32 = xgene_pcie_readl(port, addr);
|
|
val = (val32 & 0x0000ffff) | (lower_32_bits(mask) << 16);
|
|
xgene_pcie_writel(port, addr, val);
|
|
|
|
val32 = xgene_pcie_readl(port, addr + 0x04);
|
|
val = (val32 & 0xffff0000) | (lower_32_bits(mask) >> 16);
|
|
xgene_pcie_writel(port, addr + 0x04, val);
|
|
|
|
val32 = xgene_pcie_readl(port, addr + 0x04);
|
|
val = (val32 & 0x0000ffff) | (upper_32_bits(mask) << 16);
|
|
xgene_pcie_writel(port, addr + 0x04, val);
|
|
|
|
val32 = xgene_pcie_readl(port, addr + 0x08);
|
|
val = (val32 & 0xffff0000) | (upper_32_bits(mask) >> 16);
|
|
xgene_pcie_writel(port, addr + 0x08, val);
|
|
|
|
return mask;
|
|
}
|
|
|
|
static void xgene_pcie_linkup(struct xgene_pcie_port *port,
|
|
u32 *lanes, u32 *speed)
|
|
{
|
|
u32 val32;
|
|
|
|
port->link_up = false;
|
|
val32 = xgene_pcie_readl(port, PCIECORE_CTLANDSTATUS);
|
|
if (val32 & LINK_UP_MASK) {
|
|
port->link_up = true;
|
|
*speed = PIPE_PHY_RATE_RD(val32);
|
|
val32 = xgene_pcie_readl(port, BRIDGE_STATUS_0);
|
|
*lanes = val32 >> 26;
|
|
}
|
|
}
|
|
|
|
static int xgene_pcie_init_port(struct xgene_pcie_port *port)
|
|
{
|
|
struct device *dev = port->dev;
|
|
int rc;
|
|
|
|
port->clk = clk_get(dev, NULL);
|
|
if (IS_ERR(port->clk)) {
|
|
dev_err(dev, "clock not available\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
rc = clk_prepare_enable(port->clk);
|
|
if (rc) {
|
|
dev_err(dev, "clock enable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xgene_pcie_map_reg(struct xgene_pcie_port *port,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct device *dev = port->dev;
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
|
|
port->csr_base = devm_pci_remap_cfg_resource(dev, res);
|
|
if (IS_ERR(port->csr_base))
|
|
return PTR_ERR(port->csr_base);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
|
|
port->cfg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(port->cfg_base))
|
|
return PTR_ERR(port->cfg_base);
|
|
port->cfg_addr = res->start;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xgene_pcie_setup_ob_reg(struct xgene_pcie_port *port,
|
|
struct resource *res, u32 offset,
|
|
u64 cpu_addr, u64 pci_addr)
|
|
{
|
|
struct device *dev = port->dev;
|
|
resource_size_t size = resource_size(res);
|
|
u64 restype = resource_type(res);
|
|
u64 mask = 0;
|
|
u32 min_size;
|
|
u32 flag = EN_REG;
|
|
|
|
if (restype == IORESOURCE_MEM) {
|
|
min_size = SZ_128M;
|
|
} else {
|
|
min_size = 128;
|
|
flag |= OB_LO_IO;
|
|
}
|
|
|
|
if (size >= min_size)
|
|
mask = ~(size - 1) | flag;
|
|
else
|
|
dev_warn(dev, "res size 0x%llx less than minimum 0x%x\n",
|
|
(u64)size, min_size);
|
|
|
|
xgene_pcie_writel(port, offset, lower_32_bits(cpu_addr));
|
|
xgene_pcie_writel(port, offset + 0x04, upper_32_bits(cpu_addr));
|
|
xgene_pcie_writel(port, offset + 0x08, lower_32_bits(mask));
|
|
xgene_pcie_writel(port, offset + 0x0c, upper_32_bits(mask));
|
|
xgene_pcie_writel(port, offset + 0x10, lower_32_bits(pci_addr));
|
|
xgene_pcie_writel(port, offset + 0x14, upper_32_bits(pci_addr));
|
|
}
|
|
|
|
static void xgene_pcie_setup_cfg_reg(struct xgene_pcie_port *port)
|
|
{
|
|
u64 addr = port->cfg_addr;
|
|
|
|
xgene_pcie_writel(port, CFGBARL, lower_32_bits(addr));
|
|
xgene_pcie_writel(port, CFGBARH, upper_32_bits(addr));
|
|
xgene_pcie_writel(port, CFGCTL, EN_REG);
|
|
}
|
|
|
|
static int xgene_pcie_map_ranges(struct xgene_pcie_port *port,
|
|
struct list_head *res,
|
|
resource_size_t io_base)
|
|
{
|
|
struct resource_entry *window;
|
|
struct device *dev = port->dev;
|
|
int ret;
|
|
|
|
resource_list_for_each_entry(window, res) {
|
|
struct resource *res = window->res;
|
|
u64 restype = resource_type(res);
|
|
|
|
dev_dbg(dev, "%pR\n", res);
|
|
|
|
switch (restype) {
|
|
case IORESOURCE_IO:
|
|
xgene_pcie_setup_ob_reg(port, res, OMR3BARL, io_base,
|
|
res->start - window->offset);
|
|
ret = pci_remap_iospace(res, io_base);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case IORESOURCE_MEM:
|
|
if (res->flags & IORESOURCE_PREFETCH)
|
|
xgene_pcie_setup_ob_reg(port, res, OMR2BARL,
|
|
res->start,
|
|
res->start -
|
|
window->offset);
|
|
else
|
|
xgene_pcie_setup_ob_reg(port, res, OMR1BARL,
|
|
res->start,
|
|
res->start -
|
|
window->offset);
|
|
break;
|
|
case IORESOURCE_BUS:
|
|
break;
|
|
default:
|
|
dev_err(dev, "invalid resource %pR\n", res);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
xgene_pcie_setup_cfg_reg(port);
|
|
return 0;
|
|
}
|
|
|
|
static void xgene_pcie_setup_pims(struct xgene_pcie_port *port, u32 pim_reg,
|
|
u64 pim, u64 size)
|
|
{
|
|
xgene_pcie_writel(port, pim_reg, lower_32_bits(pim));
|
|
xgene_pcie_writel(port, pim_reg + 0x04,
|
|
upper_32_bits(pim) | EN_COHERENCY);
|
|
xgene_pcie_writel(port, pim_reg + 0x10, lower_32_bits(size));
|
|
xgene_pcie_writel(port, pim_reg + 0x14, upper_32_bits(size));
|
|
}
|
|
|
|
/*
|
|
* X-Gene PCIe support maximum 3 inbound memory regions
|
|
* This function helps to select a region based on size of region
|
|
*/
|
|
static int xgene_pcie_select_ib_reg(u8 *ib_reg_mask, u64 size)
|
|
{
|
|
if ((size > 4) && (size < SZ_16M) && !(*ib_reg_mask & (1 << 1))) {
|
|
*ib_reg_mask |= (1 << 1);
|
|
return 1;
|
|
}
|
|
|
|
if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
|
|
*ib_reg_mask |= (1 << 0);
|
|
return 0;
|
|
}
|
|
|
|
if ((size > SZ_1M) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 2))) {
|
|
*ib_reg_mask |= (1 << 2);
|
|
return 2;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void xgene_pcie_setup_ib_reg(struct xgene_pcie_port *port,
|
|
struct of_pci_range *range, u8 *ib_reg_mask)
|
|
{
|
|
void __iomem *cfg_base = port->cfg_base;
|
|
struct device *dev = port->dev;
|
|
void *bar_addr;
|
|
u32 pim_reg;
|
|
u64 cpu_addr = range->cpu_addr;
|
|
u64 pci_addr = range->pci_addr;
|
|
u64 size = range->size;
|
|
u64 mask = ~(size - 1) | EN_REG;
|
|
u32 flags = PCI_BASE_ADDRESS_MEM_TYPE_64;
|
|
u32 bar_low;
|
|
int region;
|
|
|
|
region = xgene_pcie_select_ib_reg(ib_reg_mask, range->size);
|
|
if (region < 0) {
|
|
dev_warn(dev, "invalid pcie dma-range config\n");
|
|
return;
|
|
}
|
|
|
|
if (range->flags & IORESOURCE_PREFETCH)
|
|
flags |= PCI_BASE_ADDRESS_MEM_PREFETCH;
|
|
|
|
bar_low = pcie_bar_low_val((u32)cpu_addr, flags);
|
|
switch (region) {
|
|
case 0:
|
|
xgene_pcie_set_ib_mask(port, BRIDGE_CFG_4, flags, size);
|
|
bar_addr = cfg_base + PCI_BASE_ADDRESS_0;
|
|
writel(bar_low, bar_addr);
|
|
writel(upper_32_bits(cpu_addr), bar_addr + 0x4);
|
|
pim_reg = PIM1_1L;
|
|
break;
|
|
case 1:
|
|
xgene_pcie_writel(port, IBAR2, bar_low);
|
|
xgene_pcie_writel(port, IR2MSK, lower_32_bits(mask));
|
|
pim_reg = PIM2_1L;
|
|
break;
|
|
case 2:
|
|
xgene_pcie_writel(port, IBAR3L, bar_low);
|
|
xgene_pcie_writel(port, IBAR3L + 0x4, upper_32_bits(cpu_addr));
|
|
xgene_pcie_writel(port, IR3MSKL, lower_32_bits(mask));
|
|
xgene_pcie_writel(port, IR3MSKL + 0x4, upper_32_bits(mask));
|
|
pim_reg = PIM3_1L;
|
|
break;
|
|
}
|
|
|
|
xgene_pcie_setup_pims(port, pim_reg, pci_addr, ~(size - 1));
|
|
}
|
|
|
|
static int xgene_pcie_parse_map_dma_ranges(struct xgene_pcie_port *port)
|
|
{
|
|
struct device_node *np = port->node;
|
|
struct of_pci_range range;
|
|
struct of_pci_range_parser parser;
|
|
struct device *dev = port->dev;
|
|
u8 ib_reg_mask = 0;
|
|
|
|
if (of_pci_dma_range_parser_init(&parser, np)) {
|
|
dev_err(dev, "missing dma-ranges property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the dma-ranges from DT */
|
|
for_each_of_pci_range(&parser, &range) {
|
|
u64 end = range.cpu_addr + range.size - 1;
|
|
|
|
dev_dbg(dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n",
|
|
range.flags, range.cpu_addr, end, range.pci_addr);
|
|
xgene_pcie_setup_ib_reg(port, &range, &ib_reg_mask);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* clear BAR configuration which was done by firmware */
|
|
static void xgene_pcie_clear_config(struct xgene_pcie_port *port)
|
|
{
|
|
int i;
|
|
|
|
for (i = PIM1_1L; i <= CFGCTL; i += 4)
|
|
xgene_pcie_writel(port, i, 0);
|
|
}
|
|
|
|
static int xgene_pcie_setup(struct xgene_pcie_port *port, struct list_head *res,
|
|
resource_size_t io_base)
|
|
{
|
|
struct device *dev = port->dev;
|
|
u32 val, lanes = 0, speed = 0;
|
|
int ret;
|
|
|
|
xgene_pcie_clear_config(port);
|
|
|
|
/* setup the vendor and device IDs correctly */
|
|
val = (XGENE_PCIE_DEVICEID << 16) | XGENE_PCIE_VENDORID;
|
|
xgene_pcie_writel(port, BRIDGE_CFG_0, val);
|
|
|
|
ret = xgene_pcie_map_ranges(port, res, io_base);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = xgene_pcie_parse_map_dma_ranges(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
xgene_pcie_linkup(port, &lanes, &speed);
|
|
if (!port->link_up)
|
|
dev_info(dev, "(rc) link down\n");
|
|
else
|
|
dev_info(dev, "(rc) x%d gen-%d link up\n", lanes, speed + 1);
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_ops xgene_pcie_ops = {
|
|
.map_bus = xgene_pcie_map_bus,
|
|
.read = xgene_pcie_config_read32,
|
|
.write = pci_generic_config_write32,
|
|
};
|
|
|
|
static int xgene_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *dn = dev->of_node;
|
|
struct xgene_pcie_port *port;
|
|
resource_size_t iobase = 0;
|
|
struct pci_bus *bus, *child;
|
|
struct pci_host_bridge *bridge;
|
|
int ret;
|
|
LIST_HEAD(res);
|
|
|
|
bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
port = pci_host_bridge_priv(bridge);
|
|
|
|
port->node = of_node_get(dn);
|
|
port->dev = dev;
|
|
|
|
port->version = XGENE_PCIE_IP_VER_UNKN;
|
|
if (of_device_is_compatible(port->node, "apm,xgene-pcie"))
|
|
port->version = XGENE_PCIE_IP_VER_1;
|
|
|
|
ret = xgene_pcie_map_reg(port, pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = xgene_pcie_init_port(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res,
|
|
&iobase);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_request_pci_bus_resources(dev, &res);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = xgene_pcie_setup(port, &res, iobase);
|
|
if (ret)
|
|
goto error;
|
|
|
|
list_splice_init(&res, &bridge->windows);
|
|
bridge->dev.parent = dev;
|
|
bridge->sysdata = port;
|
|
bridge->busnr = 0;
|
|
bridge->ops = &xgene_pcie_ops;
|
|
bridge->map_irq = of_irq_parse_and_map_pci;
|
|
bridge->swizzle_irq = pci_common_swizzle;
|
|
|
|
ret = pci_scan_root_bus_bridge(bridge);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
bus = bridge->bus;
|
|
|
|
pci_assign_unassigned_bus_resources(bus);
|
|
list_for_each_entry(child, &bus->children, node)
|
|
pcie_bus_configure_settings(child);
|
|
pci_bus_add_devices(bus);
|
|
return 0;
|
|
|
|
error:
|
|
pci_free_resource_list(&res);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id xgene_pcie_match_table[] = {
|
|
{.compatible = "apm,xgene-pcie",},
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver xgene_pcie_driver = {
|
|
.driver = {
|
|
.name = "xgene-pcie",
|
|
.of_match_table = of_match_ptr(xgene_pcie_match_table),
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = xgene_pcie_probe,
|
|
};
|
|
builtin_platform_driver(xgene_pcie_driver);
|
|
#endif
|