linux/drivers/gpu/drm/msm/disp/mdp5/mdp5_encoder.c
Thomas Gleixner caab277b1d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:07 +02:00

439 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*/
#include <drm/drm_crtc.h>
#include <drm/drm_probe_helper.h>
#include "mdp5_kms.h"
static struct mdp5_kms *get_kms(struct drm_encoder *encoder)
{
struct msm_drm_private *priv = encoder->dev->dev_private;
return to_mdp5_kms(to_mdp_kms(priv->kms));
}
#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
#include <mach/board.h>
#include <mach/msm_bus.h>
#include <mach/msm_bus_board.h>
#define MDP_BUS_VECTOR_ENTRY(ab_val, ib_val) \
{ \
.src = MSM_BUS_MASTER_MDP_PORT0, \
.dst = MSM_BUS_SLAVE_EBI_CH0, \
.ab = (ab_val), \
.ib = (ib_val), \
}
static struct msm_bus_vectors mdp_bus_vectors[] = {
MDP_BUS_VECTOR_ENTRY(0, 0),
MDP_BUS_VECTOR_ENTRY(2000000000, 2000000000),
};
static struct msm_bus_paths mdp_bus_usecases[] = { {
.num_paths = 1,
.vectors = &mdp_bus_vectors[0],
}, {
.num_paths = 1,
.vectors = &mdp_bus_vectors[1],
} };
static struct msm_bus_scale_pdata mdp_bus_scale_table = {
.usecase = mdp_bus_usecases,
.num_usecases = ARRAY_SIZE(mdp_bus_usecases),
.name = "mdss_mdp",
};
static void bs_init(struct mdp5_encoder *mdp5_encoder)
{
mdp5_encoder->bsc = msm_bus_scale_register_client(
&mdp_bus_scale_table);
DBG("bus scale client: %08x", mdp5_encoder->bsc);
}
static void bs_fini(struct mdp5_encoder *mdp5_encoder)
{
if (mdp5_encoder->bsc) {
msm_bus_scale_unregister_client(mdp5_encoder->bsc);
mdp5_encoder->bsc = 0;
}
}
static void bs_set(struct mdp5_encoder *mdp5_encoder, int idx)
{
if (mdp5_encoder->bsc) {
DBG("set bus scaling: %d", idx);
/* HACK: scaling down, and then immediately back up
* seems to leave things broken (underflow).. so
* never disable:
*/
idx = 1;
msm_bus_scale_client_update_request(mdp5_encoder->bsc, idx);
}
}
#else
static void bs_init(struct mdp5_encoder *mdp5_encoder) {}
static void bs_fini(struct mdp5_encoder *mdp5_encoder) {}
static void bs_set(struct mdp5_encoder *mdp5_encoder, int idx) {}
#endif
static void mdp5_encoder_destroy(struct drm_encoder *encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
bs_fini(mdp5_encoder);
drm_encoder_cleanup(encoder);
kfree(mdp5_encoder);
}
static const struct drm_encoder_funcs mdp5_encoder_funcs = {
.destroy = mdp5_encoder_destroy,
};
static void mdp5_vid_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_kms *mdp5_kms = get_kms(encoder);
struct drm_device *dev = encoder->dev;
struct drm_connector *connector;
int intf = mdp5_encoder->intf->num;
uint32_t dtv_hsync_skew, vsync_period, vsync_len, ctrl_pol;
uint32_t display_v_start, display_v_end;
uint32_t hsync_start_x, hsync_end_x;
uint32_t format = 0x2100;
unsigned long flags;
mode = adjusted_mode;
DBG("set mode: " DRM_MODE_FMT, DRM_MODE_ARG(mode));
ctrl_pol = 0;
/* DSI controller cannot handle active-low sync signals. */
if (mdp5_encoder->intf->type != INTF_DSI) {
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW;
}
/* probably need to get DATA_EN polarity from panel.. */
dtv_hsync_skew = 0; /* get this from panel? */
/* Get color format from panel, default is 8bpc */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (connector->encoder == encoder) {
switch (connector->display_info.bpc) {
case 4:
format |= 0;
break;
case 5:
format |= 0x15;
break;
case 6:
format |= 0x2A;
break;
case 8:
default:
format |= 0x3F;
break;
}
break;
}
}
hsync_start_x = (mode->htotal - mode->hsync_start);
hsync_end_x = mode->htotal - (mode->hsync_start - mode->hdisplay) - 1;
vsync_period = mode->vtotal * mode->htotal;
vsync_len = (mode->vsync_end - mode->vsync_start) * mode->htotal;
display_v_start = (mode->vtotal - mode->vsync_start) * mode->htotal + dtv_hsync_skew;
display_v_end = vsync_period - ((mode->vsync_start - mode->vdisplay) * mode->htotal) + dtv_hsync_skew - 1;
/*
* For edp only:
* DISPLAY_V_START = (VBP * HCYCLE) + HBP
* DISPLAY_V_END = (VBP + VACTIVE) * HCYCLE - 1 - HFP
*/
if (mdp5_encoder->intf->type == INTF_eDP) {
display_v_start += mode->htotal - mode->hsync_start;
display_v_end -= mode->hsync_start - mode->hdisplay;
}
spin_lock_irqsave(&mdp5_encoder->intf_lock, flags);
mdp5_write(mdp5_kms, REG_MDP5_INTF_HSYNC_CTL(intf),
MDP5_INTF_HSYNC_CTL_PULSEW(mode->hsync_end - mode->hsync_start) |
MDP5_INTF_HSYNC_CTL_PERIOD(mode->htotal));
mdp5_write(mdp5_kms, REG_MDP5_INTF_VSYNC_PERIOD_F0(intf), vsync_period);
mdp5_write(mdp5_kms, REG_MDP5_INTF_VSYNC_LEN_F0(intf), vsync_len);
mdp5_write(mdp5_kms, REG_MDP5_INTF_DISPLAY_HCTL(intf),
MDP5_INTF_DISPLAY_HCTL_START(hsync_start_x) |
MDP5_INTF_DISPLAY_HCTL_END(hsync_end_x));
mdp5_write(mdp5_kms, REG_MDP5_INTF_DISPLAY_VSTART_F0(intf), display_v_start);
mdp5_write(mdp5_kms, REG_MDP5_INTF_DISPLAY_VEND_F0(intf), display_v_end);
mdp5_write(mdp5_kms, REG_MDP5_INTF_BORDER_COLOR(intf), 0);
mdp5_write(mdp5_kms, REG_MDP5_INTF_UNDERFLOW_COLOR(intf), 0xff);
mdp5_write(mdp5_kms, REG_MDP5_INTF_HSYNC_SKEW(intf), dtv_hsync_skew);
mdp5_write(mdp5_kms, REG_MDP5_INTF_POLARITY_CTL(intf), ctrl_pol);
mdp5_write(mdp5_kms, REG_MDP5_INTF_ACTIVE_HCTL(intf),
MDP5_INTF_ACTIVE_HCTL_START(0) |
MDP5_INTF_ACTIVE_HCTL_END(0));
mdp5_write(mdp5_kms, REG_MDP5_INTF_ACTIVE_VSTART_F0(intf), 0);
mdp5_write(mdp5_kms, REG_MDP5_INTF_ACTIVE_VEND_F0(intf), 0);
mdp5_write(mdp5_kms, REG_MDP5_INTF_PANEL_FORMAT(intf), format);
mdp5_write(mdp5_kms, REG_MDP5_INTF_FRAME_LINE_COUNT_EN(intf), 0x3); /* frame+line? */
spin_unlock_irqrestore(&mdp5_encoder->intf_lock, flags);
mdp5_crtc_set_pipeline(encoder->crtc);
}
static void mdp5_vid_encoder_disable(struct drm_encoder *encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_kms *mdp5_kms = get_kms(encoder);
struct mdp5_ctl *ctl = mdp5_encoder->ctl;
struct mdp5_pipeline *pipeline = mdp5_crtc_get_pipeline(encoder->crtc);
struct mdp5_hw_mixer *mixer = mdp5_crtc_get_mixer(encoder->crtc);
struct mdp5_interface *intf = mdp5_encoder->intf;
int intfn = mdp5_encoder->intf->num;
unsigned long flags;
if (WARN_ON(!mdp5_encoder->enabled))
return;
mdp5_ctl_set_encoder_state(ctl, pipeline, false);
spin_lock_irqsave(&mdp5_encoder->intf_lock, flags);
mdp5_write(mdp5_kms, REG_MDP5_INTF_TIMING_ENGINE_EN(intfn), 0);
spin_unlock_irqrestore(&mdp5_encoder->intf_lock, flags);
mdp5_ctl_commit(ctl, pipeline, mdp_ctl_flush_mask_encoder(intf), true);
/*
* Wait for a vsync so we know the ENABLE=0 latched before
* the (connector) source of the vsync's gets disabled,
* otherwise we end up in a funny state if we re-enable
* before the disable latches, which results that some of
* the settings changes for the new modeset (like new
* scanout buffer) don't latch properly..
*/
mdp_irq_wait(&mdp5_kms->base, intf2vblank(mixer, intf));
bs_set(mdp5_encoder, 0);
mdp5_encoder->enabled = false;
}
static void mdp5_vid_encoder_enable(struct drm_encoder *encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_kms *mdp5_kms = get_kms(encoder);
struct mdp5_ctl *ctl = mdp5_encoder->ctl;
struct mdp5_interface *intf = mdp5_encoder->intf;
struct mdp5_pipeline *pipeline = mdp5_crtc_get_pipeline(encoder->crtc);
int intfn = intf->num;
unsigned long flags;
if (WARN_ON(mdp5_encoder->enabled))
return;
bs_set(mdp5_encoder, 1);
spin_lock_irqsave(&mdp5_encoder->intf_lock, flags);
mdp5_write(mdp5_kms, REG_MDP5_INTF_TIMING_ENGINE_EN(intfn), 1);
spin_unlock_irqrestore(&mdp5_encoder->intf_lock, flags);
mdp5_ctl_commit(ctl, pipeline, mdp_ctl_flush_mask_encoder(intf), true);
mdp5_ctl_set_encoder_state(ctl, pipeline, true);
mdp5_encoder->enabled = true;
}
static void mdp5_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_interface *intf = mdp5_encoder->intf;
if (intf->mode == MDP5_INTF_DSI_MODE_COMMAND)
mdp5_cmd_encoder_mode_set(encoder, mode, adjusted_mode);
else
mdp5_vid_encoder_mode_set(encoder, mode, adjusted_mode);
}
static void mdp5_encoder_disable(struct drm_encoder *encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_interface *intf = mdp5_encoder->intf;
if (intf->mode == MDP5_INTF_DSI_MODE_COMMAND)
mdp5_cmd_encoder_disable(encoder);
else
mdp5_vid_encoder_disable(encoder);
}
static void mdp5_encoder_enable(struct drm_encoder *encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_interface *intf = mdp5_encoder->intf;
/* this isn't right I think */
struct drm_crtc_state *cstate = encoder->crtc->state;
mdp5_encoder_mode_set(encoder, &cstate->mode, &cstate->adjusted_mode);
if (intf->mode == MDP5_INTF_DSI_MODE_COMMAND)
mdp5_cmd_encoder_enable(encoder);
else
mdp5_vid_encoder_enable(encoder);
}
static int mdp5_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc_state);
struct mdp5_interface *intf = mdp5_encoder->intf;
struct mdp5_ctl *ctl = mdp5_encoder->ctl;
mdp5_cstate->ctl = ctl;
mdp5_cstate->pipeline.intf = intf;
/*
* This is a bit awkward, but we want to flush the CTL and hit the
* START bit at most once for an atomic update. In the non-full-
* modeset case, this is done from crtc->atomic_flush(), but that
* is too early in the case of full modeset, in which case we
* defer to encoder->enable(). But we need to *know* whether
* encoder->enable() will be called to do this:
*/
if (drm_atomic_crtc_needs_modeset(crtc_state))
mdp5_cstate->defer_start = true;
return 0;
}
static const struct drm_encoder_helper_funcs mdp5_encoder_helper_funcs = {
.disable = mdp5_encoder_disable,
.enable = mdp5_encoder_enable,
.atomic_check = mdp5_encoder_atomic_check,
};
int mdp5_encoder_get_linecount(struct drm_encoder *encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_kms *mdp5_kms = get_kms(encoder);
int intf = mdp5_encoder->intf->num;
return mdp5_read(mdp5_kms, REG_MDP5_INTF_LINE_COUNT(intf));
}
u32 mdp5_encoder_get_framecount(struct drm_encoder *encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_kms *mdp5_kms = get_kms(encoder);
int intf = mdp5_encoder->intf->num;
return mdp5_read(mdp5_kms, REG_MDP5_INTF_FRAME_COUNT(intf));
}
int mdp5_vid_encoder_set_split_display(struct drm_encoder *encoder,
struct drm_encoder *slave_encoder)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_encoder *mdp5_slave_enc = to_mdp5_encoder(slave_encoder);
struct mdp5_kms *mdp5_kms;
struct device *dev;
int intf_num;
u32 data = 0;
if (!encoder || !slave_encoder)
return -EINVAL;
mdp5_kms = get_kms(encoder);
intf_num = mdp5_encoder->intf->num;
/* Switch slave encoder's TimingGen Sync mode,
* to use the master's enable signal for the slave encoder.
*/
if (intf_num == 1)
data |= MDP5_SPLIT_DPL_LOWER_INTF2_TG_SYNC;
else if (intf_num == 2)
data |= MDP5_SPLIT_DPL_LOWER_INTF1_TG_SYNC;
else
return -EINVAL;
dev = &mdp5_kms->pdev->dev;
/* Make sure clocks are on when connectors calling this function. */
pm_runtime_get_sync(dev);
/* Dumb Panel, Sync mode */
mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_UPPER, 0);
mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_LOWER, data);
mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_EN, 1);
mdp5_ctl_pair(mdp5_encoder->ctl, mdp5_slave_enc->ctl, true);
pm_runtime_put_sync(dev);
return 0;
}
void mdp5_encoder_set_intf_mode(struct drm_encoder *encoder, bool cmd_mode)
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_interface *intf = mdp5_encoder->intf;
/* TODO: Expand this to set writeback modes too */
if (cmd_mode) {
WARN_ON(intf->type != INTF_DSI);
intf->mode = MDP5_INTF_DSI_MODE_COMMAND;
} else {
if (intf->type == INTF_DSI)
intf->mode = MDP5_INTF_DSI_MODE_VIDEO;
else
intf->mode = MDP5_INTF_MODE_NONE;
}
}
/* initialize encoder */
struct drm_encoder *mdp5_encoder_init(struct drm_device *dev,
struct mdp5_interface *intf,
struct mdp5_ctl *ctl)
{
struct drm_encoder *encoder = NULL;
struct mdp5_encoder *mdp5_encoder;
int enc_type = (intf->type == INTF_DSI) ?
DRM_MODE_ENCODER_DSI : DRM_MODE_ENCODER_TMDS;
int ret;
mdp5_encoder = kzalloc(sizeof(*mdp5_encoder), GFP_KERNEL);
if (!mdp5_encoder) {
ret = -ENOMEM;
goto fail;
}
encoder = &mdp5_encoder->base;
mdp5_encoder->ctl = ctl;
mdp5_encoder->intf = intf;
spin_lock_init(&mdp5_encoder->intf_lock);
drm_encoder_init(dev, encoder, &mdp5_encoder_funcs, enc_type, NULL);
drm_encoder_helper_add(encoder, &mdp5_encoder_helper_funcs);
bs_init(mdp5_encoder);
return encoder;
fail:
if (encoder)
mdp5_encoder_destroy(encoder);
return ERR_PTR(ret);
}