forked from Minki/linux
1fdb24e969
* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
209 lines
5.1 KiB
C
209 lines
5.1 KiB
C
/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb/msm_hsusb.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clkdev.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/io.h>
|
|
#include <asm/setup.h>
|
|
|
|
#include <mach/board.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/sirc.h>
|
|
#include <mach/vreg.h>
|
|
#include <mach/mmc.h>
|
|
|
|
#include "devices.h"
|
|
|
|
extern struct sys_timer msm_timer;
|
|
|
|
static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
|
|
static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156;
|
|
|
|
/* Leave smc91x resources empty here, as we'll fill them in
|
|
* at run-time: they vary from board to board, and the true
|
|
* configuration won't be known until boot.
|
|
*/
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
static int __init msm_init_smc91x(void)
|
|
{
|
|
if (machine_is_qsd8x50_surf()) {
|
|
smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
|
|
smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff;
|
|
smc91x_resources[1].start =
|
|
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
|
|
smc91x_resources[1].end =
|
|
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
|
|
platform_device_register(&smc91x_device);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(msm_init_smc91x);
|
|
|
|
static int hsusb_phy_init_seq[] = {
|
|
0x08, 0x31, /* Increase HS Driver Amplitude */
|
|
0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */
|
|
-1
|
|
};
|
|
|
|
static struct msm_otg_platform_data msm_otg_pdata = {
|
|
.phy_init_seq = hsusb_phy_init_seq,
|
|
.mode = USB_PERIPHERAL,
|
|
.otg_control = OTG_PHY_CONTROL,
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&msm_device_uart3,
|
|
&msm_device_smd,
|
|
&msm_device_otg,
|
|
&msm_device_hsusb,
|
|
&msm_device_hsusb_host,
|
|
};
|
|
|
|
static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
|
|
{51, "sdc1_dat_3"},
|
|
{52, "sdc1_dat_2"},
|
|
{53, "sdc1_dat_1"},
|
|
{54, "sdc1_dat_0"},
|
|
{55, "sdc1_cmd"},
|
|
{56, "sdc1_clk"}
|
|
};
|
|
|
|
static struct vreg *vreg_mmc;
|
|
static unsigned long vreg_sts;
|
|
|
|
static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
|
|
{
|
|
int rc = 0;
|
|
struct platform_device *pdev;
|
|
|
|
pdev = container_of(dv, struct platform_device, dev);
|
|
|
|
if (vdd == 0) {
|
|
if (!vreg_sts)
|
|
return 0;
|
|
|
|
clear_bit(pdev->id, &vreg_sts);
|
|
|
|
if (!vreg_sts) {
|
|
rc = vreg_disable(vreg_mmc);
|
|
if (rc)
|
|
pr_err("vreg_mmc disable failed for slot "
|
|
"%d: %d\n", pdev->id, rc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (!vreg_sts) {
|
|
rc = vreg_set_level(vreg_mmc, 2900);
|
|
if (rc)
|
|
pr_err("vreg_mmc set level failed for slot %d: %d\n",
|
|
pdev->id, rc);
|
|
rc = vreg_enable(vreg_mmc);
|
|
if (rc)
|
|
pr_err("vreg_mmc enable failed for slot %d: %d\n",
|
|
pdev->id, rc);
|
|
}
|
|
set_bit(pdev->id, &vreg_sts);
|
|
return 0;
|
|
}
|
|
|
|
static struct msm_mmc_gpio_data sdc1_gpio = {
|
|
.gpio = sdc1_gpio_cfg,
|
|
.size = ARRAY_SIZE(sdc1_gpio_cfg),
|
|
};
|
|
|
|
static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
|
|
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
|
|
.translate_vdd = msm_sdcc_setup_power,
|
|
.gpio_data = &sdc1_gpio,
|
|
};
|
|
|
|
static void __init qsd8x50_init_mmc(void)
|
|
{
|
|
vreg_mmc = vreg_get(NULL, "gp5");
|
|
|
|
if (IS_ERR(vreg_mmc)) {
|
|
pr_err("vreg get for vreg_mmc failed (%ld)\n",
|
|
PTR_ERR(vreg_mmc));
|
|
return;
|
|
}
|
|
|
|
msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
|
|
}
|
|
|
|
static void __init qsd8x50_map_io(void)
|
|
{
|
|
msm_map_qsd8x50_io();
|
|
msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
|
|
}
|
|
|
|
static void __init qsd8x50_init_irq(void)
|
|
{
|
|
msm_init_irq();
|
|
msm_init_sirc();
|
|
}
|
|
|
|
static void __init qsd8x50_init(void)
|
|
{
|
|
msm_device_otg.dev.platform_data = &msm_otg_pdata;
|
|
msm_device_hsusb.dev.parent = &msm_device_otg.dev;
|
|
msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
qsd8x50_init_mmc();
|
|
}
|
|
|
|
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
|
|
.atag_offset = 0x100,
|
|
.map_io = qsd8x50_map_io,
|
|
.init_irq = qsd8x50_init_irq,
|
|
.init_machine = qsd8x50_init,
|
|
.timer = &msm_timer,
|
|
MACHINE_END
|
|
|
|
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
|
|
.atag_offset = 0x100,
|
|
.map_io = qsd8x50_map_io,
|
|
.init_irq = qsd8x50_init_irq,
|
|
.init_machine = qsd8x50_init,
|
|
.timer = &msm_timer,
|
|
MACHINE_END
|