forked from Minki/linux
f7781b0675
If the watchdog control register indicates that the watchdog hardware is disabled even after we tried to enable it, there is no point to instantiate the driver. Cc: Zoltán Böszörményi <zboszor@pr.hu> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
65 lines
1.7 KiB
C
65 lines
1.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* sp5100_tco: TCO timer driver for sp5100 chipsets.
|
|
*
|
|
* (c) Copyright 2009 Google Inc., All Rights Reserved.
|
|
*
|
|
* TCO timer driver for sp5100 chipsets
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
/*
|
|
* Some address definitions for the Watchdog
|
|
*/
|
|
#define SP5100_WDT_MEM_MAP_SIZE 0x08
|
|
#define SP5100_WDT_CONTROL(base) ((base) + 0x00) /* Watchdog Control */
|
|
#define SP5100_WDT_COUNT(base) ((base) + 0x04) /* Watchdog Count */
|
|
|
|
#define SP5100_WDT_START_STOP_BIT BIT(0)
|
|
#define SP5100_WDT_FIRED BIT(1)
|
|
#define SP5100_WDT_ACTION_RESET BIT(2)
|
|
#define SP5100_WDT_DISABLED BIT(3)
|
|
#define SP5100_WDT_TRIGGER_BIT BIT(7)
|
|
|
|
#define SP5100_PM_IOPORTS_SIZE 0x02
|
|
|
|
/*
|
|
* These two IO registers are hardcoded and there doesn't seem to be a way to
|
|
* read them from a register.
|
|
*/
|
|
|
|
/* For SP5100/SB7x0/SB8x0 chipset */
|
|
#define SP5100_IO_PM_INDEX_REG 0xCD6
|
|
#define SP5100_IO_PM_DATA_REG 0xCD7
|
|
|
|
/* For SP5100/SB7x0 chipset */
|
|
#define SP5100_SB_RESOURCE_MMIO_BASE 0x9C
|
|
|
|
#define SP5100_PM_WATCHDOG_CONTROL 0x69
|
|
#define SP5100_PM_WATCHDOG_BASE 0x6C
|
|
|
|
#define SP5100_PCI_WATCHDOG_MISC_REG 0x41
|
|
#define SP5100_PCI_WATCHDOG_DECODE_EN BIT(3)
|
|
|
|
#define SP5100_PM_WATCHDOG_DISABLE ((u8)BIT(0))
|
|
#define SP5100_PM_WATCHDOG_SECOND_RES GENMASK(2, 1)
|
|
|
|
#define SP5100_DEVNAME "SP5100 TCO"
|
|
|
|
/* For SB8x0(or later) chipset */
|
|
#define SB800_PM_ACPI_MMIO_EN 0x24
|
|
#define SB800_PM_WATCHDOG_CONTROL 0x48
|
|
#define SB800_PM_WATCHDOG_BASE 0x48
|
|
#define SB800_PM_WATCHDOG_CONFIG 0x4C
|
|
|
|
#define SB800_PCI_WATCHDOG_DECODE_EN BIT(0)
|
|
#define SB800_PM_WATCHDOG_DISABLE ((u8)BIT(1))
|
|
#define SB800_PM_WATCHDOG_SECOND_RES GENMASK(1, 0)
|
|
#define SB800_ACPI_MMIO_DECODE_EN BIT(0)
|
|
#define SB800_ACPI_MMIO_SEL BIT(1)
|
|
|
|
#define SB800_PM_WDT_MMIO_OFFSET 0xB00
|
|
|
|
#define SB800_DEVNAME "SB800 TCO"
|