forked from Minki/linux
f6ad160e6f
On P1022DS both ethernet controllers are connected to RGMII PHYs accessible via MDIO bus. Remove fixed-link property from ethernet nodes as they only required when fixed link PHYs without MDIO bus are used. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
658 lines
14 KiB
Plaintext
658 lines
14 KiB
Plaintext
/*
|
|
* P1022 DS 36Bit Physical Address Map Device Tree Source
|
|
*
|
|
* Copyright 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/ {
|
|
model = "fsl,P1022";
|
|
compatible = "fsl,P1022DS";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
pci2 = &pci2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,P1022@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
PowerPC,P1022@1 {
|
|
device_type = "cpu";
|
|
reg = <0x1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
localbus@fffe05000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0 0xffe05000 0 0x1000>;
|
|
interrupts = <19 2 0 0>;
|
|
|
|
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
|
|
0x1 0x0 0xf 0xe0000000 0x08000000
|
|
0x2 0x0 0x0 0xffa00000 0x00040000
|
|
0x3 0x0 0xf 0xffdf0000 0x00008000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x8000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x03000000>;
|
|
label = "ramdisk-nor";
|
|
read-only;
|
|
};
|
|
|
|
partition@3000000 {
|
|
reg = <0x03000000 0x00e00000>;
|
|
label = "diagnostic-nor";
|
|
read-only;
|
|
};
|
|
|
|
partition@3e00000 {
|
|
reg = <0x03e00000 0x00200000>;
|
|
label = "dink-nor";
|
|
read-only;
|
|
};
|
|
|
|
partition@4000000 {
|
|
reg = <0x04000000 0x00400000>;
|
|
label = "kernel-nor";
|
|
read-only;
|
|
};
|
|
|
|
partition@4400000 {
|
|
reg = <0x04400000 0x03b00000>;
|
|
label = "jffs2-nor";
|
|
};
|
|
|
|
partition@7f00000 {
|
|
reg = <0x07f00000 0x00080000>;
|
|
label = "dtb-nor";
|
|
read-only;
|
|
};
|
|
|
|
partition@7f80000 {
|
|
reg = <0x07f80000 0x00080000>;
|
|
label = "u-boot-nor";
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
nand@2,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,elbc-fcm-nand";
|
|
reg = <0x2 0x0 0x40000>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x02000000>;
|
|
label = "u-boot-nand";
|
|
read-only;
|
|
};
|
|
|
|
partition@2000000 {
|
|
reg = <0x02000000 0x10000000>;
|
|
label = "jffs2-nand";
|
|
};
|
|
|
|
partition@12000000 {
|
|
reg = <0x12000000 0x10000000>;
|
|
label = "ramdisk-nand";
|
|
read-only;
|
|
};
|
|
|
|
partition@22000000 {
|
|
reg = <0x22000000 0x04000000>;
|
|
label = "kernel-nand";
|
|
};
|
|
|
|
partition@26000000 {
|
|
reg = <0x26000000 0x01000000>;
|
|
label = "dtb-nand";
|
|
read-only;
|
|
};
|
|
|
|
partition@27000000 {
|
|
reg = <0x27000000 0x19000000>;
|
|
label = "reserved-nand";
|
|
};
|
|
};
|
|
|
|
board-control@3,0 {
|
|
compatible = "fsl,p1022ds-pixis";
|
|
reg = <3 0 0x30>;
|
|
interrupt-parent = <&mpic>;
|
|
/*
|
|
* IRQ8 is generated if the "EVENT" switch is pressed
|
|
* and PX_CTL[EVESEL] is set to 00.
|
|
*/
|
|
interrupts = <8 8 0 0>;
|
|
};
|
|
};
|
|
|
|
soc@fffe00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "fsl,p1022-immr", "simple-bus";
|
|
ranges = <0x0 0xf 0xffe00000 0x100000>;
|
|
bus-frequency = <0>; // Filled out by uboot.
|
|
|
|
ecm-law@0 {
|
|
compatible = "fsl,ecm-law";
|
|
reg = <0x0 0x1000>;
|
|
fsl,num-laws = <12>;
|
|
};
|
|
|
|
ecm@1000 {
|
|
compatible = "fsl,p1022-ecm", "fsl,ecm";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <16 2 0 0>;
|
|
};
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,p1022-memory-controller";
|
|
reg = <0x2000 0x1000>;
|
|
interrupts = <16 2 0 0>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <43 2 0 0>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <43 2 0 0>;
|
|
dfsrr;
|
|
|
|
wm8776:codec@1a {
|
|
compatible = "wlf,wm8776";
|
|
reg = <0x1a>;
|
|
/*
|
|
* clock-frequency will be set by U-Boot if
|
|
* the clock is enabled.
|
|
*/
|
|
};
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2 0 0>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2 0 0>;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,espi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <59 0x2 0 0>;
|
|
espi,num-ss-bits = <4>;
|
|
mode = "cpu";
|
|
|
|
fsl_m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,espi-flash";
|
|
reg = <0>;
|
|
linux,modalias = "fsl_m25p80";
|
|
spi-max-frequency = <40000000>; /* input clock */
|
|
partition@0 {
|
|
label = "u-boot-spi";
|
|
reg = <0x00000000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@100000 {
|
|
label = "kernel-spi";
|
|
reg = <0x00100000 0x00500000>;
|
|
read-only;
|
|
};
|
|
partition@600000 {
|
|
label = "dtb-spi";
|
|
reg = <0x00600000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@700000 {
|
|
label = "file system-spi";
|
|
reg = <0x00700000 0x00900000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ssi@15000 {
|
|
compatible = "fsl,mpc8610-ssi";
|
|
cell-index = <0>;
|
|
reg = <0x15000 0x100>;
|
|
interrupts = <75 2 0 0>;
|
|
fsl,mode = "i2s-slave";
|
|
codec-handle = <&wm8776>;
|
|
fsl,playback-dma = <&dma00>;
|
|
fsl,capture-dma = <&dma01>;
|
|
fsl,fifo-depth = <15>;
|
|
fsl,ssi-asynchronous;
|
|
};
|
|
|
|
dma@c300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,eloplus-dma";
|
|
reg = <0xc300 0x4>;
|
|
ranges = <0x0 0xc100 0x200>;
|
|
cell-index = <1>;
|
|
dma00: dma-channel@0 {
|
|
compatible = "fsl,ssi-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupts = <76 2 0 0>;
|
|
};
|
|
dma01: dma-channel@80 {
|
|
compatible = "fsl,ssi-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupts = <77 2 0 0>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupts = <78 2 0 0>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupts = <79 2 0 0>;
|
|
};
|
|
};
|
|
|
|
gpio: gpio-controller@f000 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8572-gpio";
|
|
reg = <0xf000 0x100>;
|
|
interrupts = <47 0x2 0 0>;
|
|
gpio-controller;
|
|
};
|
|
|
|
L2: l2-cache-controller@20000 {
|
|
compatible = "fsl,p1022-l2-cache-controller";
|
|
reg = <0x20000 0x1000>;
|
|
cache-line-size = <32>; // 32 bytes
|
|
cache-size = <0x40000>; // L2, 256K
|
|
interrupts = <16 2 0 0>;
|
|
};
|
|
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,eloplus-dma";
|
|
reg = <0x21300 0x4>;
|
|
ranges = <0x0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupts = <20 2 0 0>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupts = <21 2 0 0>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupts = <22 2 0 0>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupts = <23 2 0 0>;
|
|
};
|
|
};
|
|
|
|
usb@22000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x22000 0x1000>;
|
|
interrupts = <28 0x2 0 0>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
mdio@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,etsec2-mdio";
|
|
reg = <0x24000 0x1000 0xb0030 0x4>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
interrupts = <3 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupts = <9 1 0 0>;
|
|
reg = <0x2>;
|
|
};
|
|
};
|
|
|
|
mdio@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,etsec2-mdio";
|
|
reg = <0x25000 0x1000 0xb1030 0x4>;
|
|
};
|
|
|
|
enet0: ethernet@B0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
fsl,magic-packet;
|
|
fsl,wake-on-filer;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
queue-group@0{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB0000 0x1000>;
|
|
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
|
|
};
|
|
queue-group@1{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB4000 0x1000>;
|
|
interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@B1000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
queue-group@0{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB1000 0x1000>;
|
|
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
|
|
};
|
|
queue-group@1{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB5000 0x1000>;
|
|
interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
|
|
};
|
|
};
|
|
|
|
sdhci@2e000 {
|
|
compatible = "fsl,p1022-esdhc", "fsl,esdhc";
|
|
reg = <0x2e000 0x1000>;
|
|
interrupts = <72 0x2 0 0>;
|
|
fsl,sdhci-auto-cmd12;
|
|
/* Filled in by U-Boot */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
|
|
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
|
|
"fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <45 2 0 0 58 2 0 0>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0x97c>;
|
|
fsl,descriptor-types-mask = <0x3a30abf>;
|
|
};
|
|
|
|
sata@18000 {
|
|
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
|
|
reg = <0x18000 0x1000>;
|
|
cell-index = <1>;
|
|
interrupts = <74 0x2 0 0>;
|
|
};
|
|
|
|
sata@19000 {
|
|
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
|
|
reg = <0x19000 0x1000>;
|
|
cell-index = <2>;
|
|
interrupts = <41 0x2 0 0>;
|
|
};
|
|
|
|
power@e0070{
|
|
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
|
|
reg = <0xe0070 0x20>;
|
|
};
|
|
|
|
display@10000 {
|
|
compatible = "fsl,diu", "fsl,p1022-diu";
|
|
reg = <0x10000 1000>;
|
|
interrupts = <64 2 0 0>;
|
|
};
|
|
|
|
timer@41100 {
|
|
compatible = "fsl,mpic-global-timer";
|
|
reg = <0x41100 0x100 0x41300 4>;
|
|
interrupts = <0 0 3 0
|
|
1 0 3 0
|
|
2 0 3 0
|
|
3 0 3 0>;
|
|
};
|
|
|
|
timer@42100 {
|
|
compatible = "fsl,mpic-global-timer";
|
|
reg = <0x42100 0x100 0x42300 4>;
|
|
interrupts = <4 0 3 0
|
|
5 0 3 0
|
|
6 0 3 0
|
|
7 0 3 0>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <4>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "fsl,mpic";
|
|
device_type = "open-pic";
|
|
};
|
|
|
|
msi@41600 {
|
|
compatible = "fsl,p1022-msi", "fsl,mpic-msi";
|
|
reg = <0x41600 0x80>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xe0 0 0 0
|
|
0xe1 0 0 0
|
|
0xe2 0 0 0
|
|
0xe3 0 0 0
|
|
0xe4 0 0 0
|
|
0xe5 0 0 0
|
|
0xe6 0 0 0
|
|
0xe7 0 0 0>;
|
|
};
|
|
|
|
global-utilities@e0000 { //global utilities block
|
|
compatible = "fsl,p1022-guts";
|
|
reg = <0xe0000 0x1000>;
|
|
fsl,has-rstcr;
|
|
};
|
|
};
|
|
|
|
pci0: pcie@fffe09000 {
|
|
compatible = "fsl,p1022-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xf 0xffe09000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupts = <16 2 0 0>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 4 1
|
|
0000 0 0 2 &mpic 5 1
|
|
0000 0 0 3 &mpic 6 1
|
|
0000 0 0 4 &mpic 7 1
|
|
>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xe0000000
|
|
0x2000000 0x0 0xe0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@fffe0a000 {
|
|
compatible = "fsl,p1022-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xf 0xffe0a000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupts = <16 2 0 0>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 0 1
|
|
0000 0 0 2 &mpic 1 1
|
|
0000 0 0 3 &mpic 2 1
|
|
0000 0 0 4 &mpic 3 1
|
|
>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xe0000000
|
|
0x2000000 0x0 0xe0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
|
|
pci2: pcie@fffe0b000 {
|
|
compatible = "fsl,p1022-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xf 0xffe0b000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupts = <16 2 0 0>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 8 1
|
|
0000 0 0 2 &mpic 9 1
|
|
0000 0 0 3 &mpic 10 1
|
|
0000 0 0 4 &mpic 11 1
|
|
>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xe0000000
|
|
0x2000000 0x0 0xe0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
};
|