forked from Minki/linux
2d05c392b8
P1010RDB Overview
-----------------
1Gbyte DDR3 (on board DDR)
32Mbyte 16bit NOR flash
32Mbyte SLC NAND Flash
256 Kbit M24256 I2C EEPROM
128 Mbit SPI Flash memory
I2C Board 128x8 bit memory
SD/MMC connector to interface with the SD memory card
2 SATA interface
1 internal SATA connect to 2.5. 160G SATA2 HDD
1 eSATA connector to rear panel
USB 2.0
x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface.
x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet
eTSEC1: Connected to RGMII PHY VSC8641XKO
eTSEC2: Connected to SGMII PHY VSC8221
eTSEC3: Connected to SGMII PHY VSC8221 eCAN
Two DB-9 female connectors for Field bus interface UART
DUART interface: supports two UARTs up to 115200 bps for console display
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
281 lines
6.0 KiB
Plaintext
281 lines
6.0 KiB
Plaintext
/*
|
|
* P1010 RDB Device Tree Source
|
|
*
|
|
* Copyright 2011 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/include/ "p1010si.dtsi"
|
|
|
|
/ {
|
|
model = "fsl,P1010RDB";
|
|
compatible = "fsl,P1010RDB";
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
ethernet2 = &enet2;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
ifc@ffe1e000 {
|
|
/* NOR, NAND Flashes and CPLD on board */
|
|
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
|
|
0x1 0x0 0x0 0xff800000 0x00010000
|
|
0x3 0x0 0x0 0xffb00000 0x00000020>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x2000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
|
|
partition@40000 {
|
|
/* 256KB for DTB Image */
|
|
reg = <0x00040000 0x00040000>;
|
|
label = "NOR DTB Image";
|
|
};
|
|
|
|
partition@80000 {
|
|
/* 7 MB for Linux Kernel Image */
|
|
reg = <0x00080000 0x00700000>;
|
|
label = "NOR Linux Kernel Image";
|
|
};
|
|
|
|
partition@800000 {
|
|
/* 20MB for JFFS2 based Root file System */
|
|
reg = <0x00800000 0x01400000>;
|
|
label = "NOR JFFS2 Root File System";
|
|
};
|
|
|
|
partition@1f00000 {
|
|
/* This location must not be altered */
|
|
/* 512KB for u-boot Bootloader Image */
|
|
/* 512KB for u-boot Environment Variables */
|
|
reg = <0x01f00000 0x00100000>;
|
|
label = "NOR U-Boot Image";
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
nand@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,ifc-nand";
|
|
reg = <0x1 0x0 0x10000>;
|
|
|
|
partition@0 {
|
|
/* This location must not be altered */
|
|
/* 1MB for u-boot Bootloader Image */
|
|
reg = <0x0 0x00100000>;
|
|
label = "NAND U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 1MB for DTB Image */
|
|
reg = <0x00100000 0x00100000>;
|
|
label = "NAND DTB Image";
|
|
};
|
|
|
|
partition@200000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00200000 0x00400000>;
|
|
label = "NAND Linux Kernel Image";
|
|
};
|
|
|
|
partition@600000 {
|
|
/* 4MB for Compressed Root file System Image */
|
|
reg = <0x00600000 0x00400000>;
|
|
label = "NAND Compressed RFS Image";
|
|
};
|
|
|
|
partition@a00000 {
|
|
/* 15MB for JFFS2 based Root file System */
|
|
reg = <0x00a00000 0x00f00000>;
|
|
label = "NAND JFFS2 Root File System";
|
|
};
|
|
|
|
partition@1900000 {
|
|
/* 7MB for User Area */
|
|
reg = <0x01900000 0x00700000>;
|
|
label = "NAND User area";
|
|
};
|
|
};
|
|
|
|
cpld@3,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1010rdb-cpld";
|
|
reg = <0x3 0x0 0x0000020>;
|
|
bank-width = <1>;
|
|
device-width = <1>;
|
|
};
|
|
};
|
|
|
|
soc@ffe00000 {
|
|
spi@7000 {
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spansion,s25sl12801";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partition@0 {
|
|
/* 1MB for u-boot Bootloader Image */
|
|
/* 1MB for Environment */
|
|
reg = <0x0 0x00100000>;
|
|
label = "SPI Flash U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 512KB for DTB Image */
|
|
reg = <0x00100000 0x00080000>;
|
|
label = "SPI Flash DTB Image";
|
|
};
|
|
|
|
partition@180000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00180000 0x00400000>;
|
|
label = "SPI Flash Linux Kernel Image";
|
|
};
|
|
|
|
partition@580000 {
|
|
/* 4MB for Compressed RFS Image */
|
|
reg = <0x00580000 0x00400000>;
|
|
label = "SPI Flash Compressed RFSImage";
|
|
};
|
|
|
|
partition@980000 {
|
|
/* 6.5MB for JFFS2 based RFS */
|
|
reg = <0x00980000 0x00680000>;
|
|
label = "SPI Flash JFFS2 RFS";
|
|
};
|
|
};
|
|
};
|
|
|
|
can0@1c000 {
|
|
fsl,flexcan-clock-source = "platform";
|
|
};
|
|
|
|
can1@1d000 {
|
|
fsl,flexcan-clock-source = "platform";
|
|
};
|
|
|
|
usb@22000 {
|
|
phy_type = "utmi";
|
|
};
|
|
|
|
mdio@24000 {
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <3 1>;
|
|
reg = <0x1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <0x0>;
|
|
};
|
|
|
|
phy2: ethernet-phy@2 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <0x2>;
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@b0000 {
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
enet1: ethernet@b1000 {
|
|
phy-handle = <&phy1>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
enet2: ethernet@b2000 {
|
|
phy-handle = <&phy2>;
|
|
tbi-handle = <&tbi1>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe09000 {
|
|
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
|
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
|
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
|
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
|
>;
|
|
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe0a000 {
|
|
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
|
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
|
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
|
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
|
>;
|
|
ranges = <0x2000000 0x0 0x80000000
|
|
0x2000000 0x0 0x80000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
};
|