| .. |
|
include
|
|
|
|
testcases
|
of/irq: Fix bug in interrupt parsing refactor.
|
2013-11-03 23:16:35 +00:00 |
|
aks-cdu.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
am33xx-clocks.dtsi
|
ARM: dts: am33xx clock data
|
2014-01-17 12:36:35 -08:00 |
|
am33xx.dtsi
|
ARM: dts: am33xx clock data
|
2014-01-17 12:36:35 -08:00 |
|
am35xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
|
am43x-epos-evm.dts
|
ARM: dts: AM4372: Update Support for EPOS EVM
|
2013-10-20 19:16:55 +02:00 |
|
am43xx-clocks.dtsi
|
ARM: dts: am43xx clock data
|
2014-01-17 12:36:52 -08:00 |
|
am335x-base0033.dts
|
ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
|
2013-11-26 15:03:38 -08:00 |
|
am335x-bone-common.dtsi
|
ARM: dts: am335x-bone-common: correct mux mode for cmd line
|
2013-10-11 21:06:38 +02:00 |
|
am335x-bone.dts
|
ARM: dts: AM33XX: Add AES data and documentation
|
2013-10-11 21:06:40 +02:00 |
|
am335x-boneblack.dts
|
ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display
|
2013-10-11 21:06:42 +02:00 |
|
am335x-evm.dts
|
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
|
2013-11-15 16:43:53 -08:00 |
|
am335x-evmsk.dts
|
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
|
2013-11-15 16:43:53 -08:00 |
|
am335x-igep0033.dtsi
|
ARM: dts: AM33XX IGEP0033: add USB support
|
2013-11-26 15:03:39 -08:00 |
|
am335x-nano.dts
|
ARM: dts: Add support for Newflow NanoBone board
|
2013-10-22 14:56:33 +02:00 |
|
am3517_mt_ventoux.dts
|
ARM: dts: AM3XXX: Use #include for all device trees
|
2013-06-18 18:53:41 -05:00 |
|
am3517-evm.dts
|
ARM: dts: Add basic devices on am3517-evm
|
2013-12-08 14:15:46 -08:00 |
|
am3517.dtsi
|
ARM: dts: AM35xx: use DT clock data
|
2014-01-17 12:36:49 -08:00 |
|
am4372.dtsi
|
ARM: dts: am43xx clock data
|
2014-01-17 12:36:52 -08:00 |
|
animeo_ip.dts
|
ARM: at91: Animeo IP: fix mtd partition table
|
2013-12-09 11:10:13 +01:00 |
|
armada-370-db.dts
|
ARM: mvebu: re-enable PCIe on Armada 370 DB
|
2013-11-25 18:24:36 +00:00 |
|
armada-370-mirabox.dts
|
ARM: mvebu: Enable NAND controller in Armada 370 Mirabox
|
2013-11-24 03:40:19 +00:00 |
|
armada-370-netgear-rn102.dts
|
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file
|
2013-12-20 03:13:56 +00:00 |
|
armada-370-netgear-rn104.dts
|
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file
|
2013-12-20 03:13:57 +00:00 |
|
armada-370-rd.dts
|
ARM: mvebu: Enable NAND controller in A370 Reference Design board
|
2013-12-12 14:04:34 +00:00 |
|
armada-370-xp.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
|
armada-370.dtsi
|
ARM: mvebu: sort DT nodes by address
|
2013-12-12 15:00:44 +00:00 |
|
armada-xp-axpwifiap.dts
|
ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding
|
2013-08-07 20:05:05 +00:00 |
|
armada-xp-db.dts
|
ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes
|
2013-08-06 14:11:27 +00:00 |
|
armada-xp-gp.dts
|
ARM: mvebu: Enable NAND controller in Armada XP GP board
|
2013-11-24 03:40:19 +00:00 |
|
armada-xp-matrix.dts
|
arm: mvebu: add support for the Armada XP Matrix board
|
2013-10-03 15:13:01 +00:00 |
|
armada-xp-mv78230.dtsi
|
ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable
|
2013-11-23 15:29:06 +00:00 |
|
armada-xp-mv78260.dtsi
|
ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260
|
2013-11-23 15:31:07 +00:00 |
|
armada-xp-mv78460.dtsi
|
ARM: mvebu: link PCIe controllers to the MSI controller
|
2013-09-30 15:00:27 +00:00 |
|
armada-xp-netgear-rn2120.dts
|
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file
|
2013-12-20 03:13:57 +00:00 |
|
armada-xp-openblocks-ax3-4.dts
|
ARM: mvebu: dts: remove unneeded linux,default-state from led nodes
|
2013-11-23 17:34:40 +00:00 |
|
armada-xp.dtsi
|
ARM: mvebu: fix register length for Armada XP PMSU
|
2013-12-25 01:56:06 +00:00 |
|
armv7-m.dtsi
|
ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
|
2013-12-16 17:51:34 +01:00 |
|
at91-ariag25.dts
|
ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled
|
2013-05-31 16:42:27 +02:00 |
|
at91-cosino_mega2560.dts
|
ARM: at91: add support for Cosino board series by HCE Engineering
|
2013-12-09 11:10:11 +01:00 |
|
at91-cosino.dtsi
|
ARM: at91: add support for Cosino board series by HCE Engineering
|
2013-12-09 11:10:11 +01:00 |
|
at91-foxg20.dts
|
ARM: at91: switch Fox G20 board .dts to pre-processor defines
|
2013-05-31 16:42:28 +02:00 |
|
at91-qil_a9260.dts
|
ARM: at91: switch Calao QIL-A9260 board to DT
|
2013-12-19 17:27:30 +01:00 |
|
at91rm9200_pqfp.dtsi
|
ARM: at91/dt: add at91rm9200 PQFP package version
|
2013-08-21 12:18:52 +02:00 |
|
at91rm9200.dtsi
|
ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions
|
2013-12-09 11:07:15 +01:00 |
|
at91rm9200ek.dts
|
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
|
2013-12-09 15:08:57 +01:00 |
|
at91sam9g15.dtsi
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
at91sam9g15ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
at91sam9g20.dtsi
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
at91sam9g20ek_2mmc.dts
|
ARM: at91: dt: switch to pinctrl to pre-processor
|
2013-05-17 12:11:39 +02:00 |
|
at91sam9g20ek_common.dtsi
|
ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek
|
2013-10-18 16:50:13 +02:00 |
|
at91sam9g20ek.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
at91sam9g25.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
|
at91sam9g25ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
at91sam9g35.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
|
at91sam9g35ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
at91sam9g45.dtsi
|
ARM: at91/dt: add sam9 watchdog default options to SoCs
|
2014-01-28 21:33:14 +01:00 |
|
at91sam9m10g45ek.dts
|
ARM: at91: at91sam9m10g45ek: switch to PWM leds
|
2013-12-19 23:00:05 +01:00 |
|
at91sam9n12.dtsi
|
ARM: at91/dt: add sam9 watchdog default options to SoCs
|
2014-01-28 21:33:14 +01:00 |
|
at91sam9n12ek.dts
|
ARM: at91: add sound support on at91sam9n12ek board
|
2013-10-14 09:43:26 +02:00 |
|
at91sam9x5_macb0.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
|
at91sam9x5_macb1.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
|
at91sam9x5_usart3.dtsi
|
ARM: at91: add usart3 alias to dtsi
|
2013-12-02 14:14:53 +01:00 |
|
at91sam9x5.dtsi
|
ARM: at91/dt: add sam9 watchdog default options to SoCs
|
2014-01-28 21:33:14 +01:00 |
|
at91sam9x5cm.dtsi
|
ARM: at91: dt: switch to pinctrl to pre-processor
|
2013-05-17 12:11:39 +02:00 |
|
at91sam9x5ek.dtsi
|
ARM: SoC DT updates for 3.12
|
2013-09-06 13:26:27 -07:00 |
|
at91sam9x25.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
|
at91sam9x25ek.dts
|
Adding the DT support to USB gadget High-Speed aka usba.
|
2013-06-14 18:58:28 -07:00 |
|
at91sam9x35.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
|
at91sam9x35ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
at91sam9260.dtsi
|
ARM: at91/dt: add sam9 watchdog default options to SoCs
|
2014-01-28 21:33:14 +01:00 |
|
at91sam9263.dtsi
|
ARM: at91/dt: add sam9 watchdog default options to SoCs
|
2014-01-28 21:33:14 +01:00 |
|
at91sam9263ek.dts
|
ARM: at91: sam9263ek: add dt lcd support
|
2013-12-09 11:10:10 +01:00 |
|
atlas6-evb.dts
|
|
|
|
atlas6.dtsi
|
ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
|
2014-01-09 20:04:12 +08:00 |
|
bcm2835-rpi-b.dts
|
ARM: bcm2835: add USB controller to device tree
|
2014-01-02 12:08:03 -08:00 |
|
bcm2835.dtsi
|
ARM: bcm2835: add USB controller to device tree
|
2014-01-02 12:08:03 -08:00 |
|
bcm11351-brt.dts
|
ARM: dts: add usb udc support to bcm281xx
|
2013-12-23 00:14:11 -08:00 |
|
bcm11351.dtsi
|
ARM: SoC late changes for v3.14
|
2014-01-30 18:08:27 -08:00 |
|
bcm28155-ap.dts
|
ARM: dts: bcm28155-ap: Fix Card Detection GPIO
|
2014-01-31 15:11:22 -08:00 |
|
berlin2-sony-nsz-gs7.dts
|
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
|
2013-12-13 16:31:05 +01:00 |
|
berlin2.dtsi
|
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
|
2013-12-13 16:31:05 +01:00 |
|
berlin2cd-google-chromecast.dts
|
ARM: add Armada 1500-mini and Chromecast device tree files
|
2013-12-13 16:31:06 +01:00 |
|
berlin2cd.dtsi
|
ARM: add Armada 1500-mini and Chromecast device tree files
|
2013-12-13 16:31:06 +01:00 |
|
da850-enbw-cmc.dts
|
ARM: davinci: da850: Use #include for all device trees
|
2013-06-20 15:04:30 +05:30 |
|
da850-evm.dts
|
ARM: davinci: da850 evm: add GPIO pinumux entries DT node
|
2013-12-15 18:40:49 +05:30 |
|
da850.dtsi
|
ARM: davinci: da850: add GPIO DT node
|
2013-12-15 18:35:37 +05:30 |
|
dove-cm-a510.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
|
dove-cubox.dts
|
ARM: mvebu: dts: remove unneeded linux,default-state from led nodes
|
2013-11-23 17:34:40 +00:00 |
|
dove-d2plug.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
|
dove-d3plug.dts
|
ARM: dove: add initial DT file for Globalscale D3Plug
|
2013-09-30 15:00:54 +00:00 |
|
dove-dove-db.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
|
dove.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
dra7-evm.dts
|
ARM: dts: dra7-evm: add smps123 supply for CPU
|
2013-10-22 17:33:17 +02:00 |
|
dra7.dtsi
|
ARM: dts: dra7 clock data
|
2014-01-17 12:36:04 -08:00 |
|
dra7xx-clocks.dtsi
|
ARM: dts: DRA7: Add PCIe related clock nodes
|
2014-01-17 12:36:31 -08:00 |
|
ea3250.dts
|
|
|
|
ecx-2000.dts
|
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
|
2013-11-04 17:01:05 -06:00 |
|
ecx-common.dtsi
|
EDAC updates for 3.13
|
2013-11-18 14:50:17 -08:00 |
|
efm32gg-dk3750.dts
|
ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
|
2013-12-16 17:51:34 +01:00 |
|
efm32gg.dtsi
|
ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
|
2013-12-16 17:51:34 +01:00 |
|
elpida_ecb240abacn.dtsi
|
|
|
|
emev2-kzm9d.dts
|
ARM: shmobile: emev2: Use interrupt macros in DT files
|
2013-12-10 17:27:20 +09:00 |
|
emev2.dtsi
|
ARM: shmobile: emev2: Setup internal peripheral interrupts as level high
|
2013-12-10 17:27:21 +09:00 |
|
ethernut5.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
evk-pro3.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
exynos4.dtsi
|
ARM: dts: Fix missing spaces after labels for exynos
|
2013-12-21 08:24:38 +09:00 |
|
exynos4x12-pinctrl.dtsi
|
ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals
|
2013-08-06 02:49:43 +09:00 |
|
exynos4x12.dtsi
|
ARM: dts: Simplify MCT interrupt map for exynos4 SoCs
|
2013-12-21 08:24:38 +09:00 |
|
exynos5.dtsi
|
ARM: dts: Fix missing spaces after labels for exynos
|
2013-12-21 08:24:38 +09:00 |
|
exynos4210-origen.dts
|
ARM: dts: Update display clock frequency for Origen-4210
|
2013-12-16 04:41:56 +09:00 |
|
exynos4210-pinctrl.dtsi
|
ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes
|
2013-08-07 01:08:24 +09:00 |
|
exynos4210-smdkv310.dts
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
|
exynos4210-trats.dts
|
ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards
|
2013-10-16 07:25:40 +09:00 |
|
exynos4210-universal_c210.dts
|
ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board
|
2013-10-16 07:25:41 +09:00 |
|
exynos4210.dtsi
|
ARM: dts: Fix missing spaces after labels for exynos
|
2013-12-21 08:24:38 +09:00 |
|
exynos4212.dtsi
|
ARM: dts: Fix missing spaces after labels for exynos
|
2013-12-21 08:24:38 +09:00 |
|
exynos4412-odroidx.dts
|
The first half of the clk framework pull request is made up almost
|
2014-01-23 18:56:08 -08:00 |
|
exynos4412-origen.dts
|
ARM: dts: Fix definition of MSHC device tree nodes for exynos4x12
|
2013-12-21 08:01:23 +09:00 |
|
exynos4412-smdk4412.dts
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
|
exynos4412-tiny4412.dts
|
ARM: dts: add support for EXYNOS4412 based TINY4412 board
|
2014-01-04 16:12:04 +09:00 |
|
exynos4412-trats2.dts
|
The first half of the clk framework pull request is made up almost
|
2014-01-23 18:56:08 -08:00 |
|
exynos4412.dtsi
|
ARM: dts: Fix missing spaces after labels for exynos
|
2013-12-21 08:24:38 +09:00 |
|
exynos5250-arndale.dts
|
ARM: dts: Disable I2C controllers by default on Exynos5250
|
2013-12-21 08:33:23 +09:00 |
|
exynos5250-cros-common.dtsi
|
The first half of the clk framework pull request is made up almost
|
2014-01-23 18:56:08 -08:00 |
|
exynos5250-pinctrl.dtsi
|
ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250
|
2013-10-16 07:23:42 +09:00 |
|
exynos5250-smdk5250.dts
|
ARM: dts: Disable I2C controllers by default on Exynos5250
|
2013-12-21 08:33:23 +09:00 |
|
exynos5250-snow.dts
|
ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix
|
2013-12-21 10:09:25 +09:00 |
|
exynos5250.dtsi
|
The first half of the clk framework pull request is made up almost
|
2014-01-23 18:56:08 -08:00 |
|
exynos5420-arndale-octa.dts
|
ARM: dts: Add initial support for Arndale Octa board
|
2014-01-04 16:11:21 +09:00 |
|
exynos5420-pinctrl.dtsi
|
ARM: dts: Fix a typo in exynos5420-pinctrl.dtsi
|
2013-12-12 06:58:37 +09:00 |
|
exynos5420-smdk5420.dts
|
ARM: dts: Add dwmmc DT nodes for exynos5420 SOC
|
2013-12-16 04:47:32 +09:00 |
|
exynos5420.dtsi
|
The first half of the clk framework pull request is made up almost
|
2014-01-23 18:56:08 -08:00 |
|
exynos5440-sd5v1.dts
|
ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards
|
2013-10-16 07:23:55 +09:00 |
|
exynos5440-ssdk5440.dts
|
ARM: SoC DT updates for 3.13
|
2013-11-11 17:34:56 +09:00 |
|
exynos5440.dtsi
|
ARM: dts: Fix missing spaces after labels for exynos
|
2013-12-21 08:24:38 +09:00 |
|
ge863-pro3.dtsi
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
hi3620-hi4511.dts
|
ARM: dts: rename hi4511 dts file
|
2013-12-20 08:23:01 -08:00 |
|
hi3620.dtsi
|
ARM: dts: enable clock binding on Hi3620
|
2013-12-17 16:43:35 -08:00 |
|
highbank.dts
|
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
|
2013-11-04 17:01:05 -06:00 |
|
imx6dl-cubox-i.dts
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
|
imx6dl-gw51xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6dl-gw52xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6dl-gw53xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6dl-gw54xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6dl-hummingboard.dts
|
ARM: imx: initial SolidRun HummingBoard support
|
2014-01-27 14:18:09 +00:00 |
|
imx6dl-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT
|
2014-02-09 21:29:06 +08:00 |
|
imx6dl-sabreauto.dts
|
ARM: dts: imx: share pad macro names between imx6q and imx6dl
|
2013-08-22 23:29:11 +08:00 |
|
imx6dl-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
|
imx6dl-sabresd.dts
|
ARM: dts: imx: share pad macro names between imx6q and imx6dl
|
2013-08-22 23:29:11 +08:00 |
|
imx6dl-wandboard.dts
|
ARM: dts: imx6: Add support for imx6q wandboard
|
2013-08-22 23:29:28 +08:00 |
|
imx6dl.dtsi
|
ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH
|
2014-02-09 21:29:09 +08:00 |
|
imx6q-arm2.dts
|
ARM: dts: imx6: use generic node name for fixed regulator
|
2014-02-09 21:28:59 +08:00 |
|
imx6q-cm-fx6.dts
|
ARM: dts: Add initial support for cm-fx6.
|
2014-02-09 21:28:55 +08:00 |
|
imx6q-cubox-i.dts
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
|
imx6q-dmo-edmqmx6.dts
|
ARM: dts: imx6: Add support for imx6q dmo edmqmx6
|
2014-02-09 21:29:01 +08:00 |
|
imx6q-gw51xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6q-gw52xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6q-gw53xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6q-gw54xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6q-gw5400-a.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6q-phytec-pbab01.dts
|
ARM: dts: Phytec imx6q pfla02 and pbab01 support
|
2013-06-17 16:04:31 +08:00 |
|
imx6q-phytec-pfla02.dtsi
|
ARM: dts: imx6qdl: make pinctrl nodes board specific
|
2014-02-09 21:28:56 +08:00 |
|
imx6q-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT
|
2014-02-09 21:29:06 +08:00 |
|
imx6q-sabreauto.dts
|
ARM: dtsi: enable ahci sata on imx6q platforms
|
2013-08-22 23:29:25 +08:00 |
|
imx6q-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
|
imx6q-sabresd.dts
|
ARM: dtsi: enable ahci sata on imx6q platforms
|
2013-08-22 23:29:25 +08:00 |
|
imx6q-sbc6x.dts
|
ARM: dts: imx6qdl: make pinctrl nodes board specific
|
2014-02-09 21:28:56 +08:00 |
|
imx6q-udoo.dts
|
ARM: dts: imx6q-udoo: Add Ethernet support
|
2014-02-09 21:29:02 +08:00 |
|
imx6q-wandboard.dts
|
ARM: dts: imx6q-wandboard: Add sata support
|
2013-08-22 23:29:30 +08:00 |
|
imx6q.dtsi
|
ARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH
|
2014-02-09 21:29:08 +08:00 |
|
imx6qdl-cubox-i.dtsi
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
|
imx6qdl-gw51xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6qdl-gw52xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6qdl-gw53xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6qdl-gw54xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
|
imx6qdl-microsom-ar8035.dtsi
|
ARM: imx: initial SolidRun HummingBoard support
|
2014-01-27 14:18:09 +00:00 |
|
imx6qdl-microsom.dtsi
|
ARM: imx: initial SolidRun HummingBoard support
|
2014-01-27 14:18:09 +00:00 |
|
imx6qdl-sabreauto.dtsi
|
ARM: dts: imx6qdl: add spdif support for sabreauto
|
2014-02-09 21:29:20 +08:00 |
|
imx6qdl-sabrelite.dtsi
|
ARM: dts: imx6qdl-sabrelite: add pwms for backlights
|
2014-02-09 21:29:28 +08:00 |
|
imx6qdl-sabresd.dtsi
|
ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000
|
2014-02-09 21:29:04 +08:00 |
|
imx6qdl-wandboard.dtsi
|
ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000
|
2014-02-09 21:29:04 +08:00 |
|
imx6qdl.dtsi
|
ARM: dts: imx6qdl: add aliases for can interfaces
|
2014-02-09 21:29:15 +08:00 |
|
imx6sl-evk.dts
|
ARM: dts: imx6: use generic node name for fixed regulator
|
2014-02-09 21:28:59 +08:00 |
|
imx6sl-pinfunc.h
|
|
|
|
imx6sl.dtsi
|
ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH
|
2014-02-09 21:29:10 +08:00 |
|
imx23-evk.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx23-olinuxino.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx23-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
|
imx23-stmp378x_devb.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx23.dtsi
|
ARM: mxs: dts: Enable DCP for MXS
|
2014-01-05 20:49:56 +08:00 |
|
imx25-karo-tx25.dts
|
|
|
|
imx25-pdk.dts
|
|
|
|
imx25.dtsi
|
ARM: dts: imx25: Make lcdc compatible to imx21 fb
|
2013-08-22 23:29:15 +08:00 |
|
imx27-apf27.dts
|
|
|
|
imx27-apf27dev.dts
|
ARM: imx27-apf27dev: Add framebuffer support
|
2013-10-08 14:36:41 +08:00 |
|
imx27-pdk.dts
|
|
|
|
imx27-phytec-phycard-s-rdk.dts
|
ARM: dts: imx27 phyCARD-S, i2c ADC device node
|
2013-08-22 23:29:05 +08:00 |
|
imx27-phytec-phycard-s-som.dts
|
ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk
|
2013-08-22 23:29:03 +08:00 |
|
imx27-phytec-phycore-rdk.dts
|
ARM: dts: imx27-phytec-phycore-rdk: Add CAN node
|
2013-08-22 23:28:56 +08:00 |
|
imx27-phytec-phycore-som.dts
|
ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
|
2013-08-22 23:29:57 +08:00 |
|
imx27.dtsi
|
ARM: imx27: add missing #pwm-cells property
|
2013-10-18 16:27:01 +08:00 |
|
imx28-apf28.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers
|
2013-09-26 13:01:36 +08:00 |
|
imx28-apf28dev.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-apx4devkit.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-cfa10036.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-cfa10037.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-cfa10049.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-cfa10055.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-cfa10056.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-cfa10057.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-cfa10058.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-evk.dts
|
ARM: SoC DT updates for 3.13
|
2013-11-11 17:34:56 +09:00 |
|
imx28-m28cu3.dts
|
ARM: dts: mxs: Add MSR M28CU3 board
|
2013-10-05 10:16:33 +08:00 |
|
imx28-m28evk.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
|
imx28-sps1.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
|
imx28-tx28.dts
|
ARM: dts: tx28: restructure and update DTS file
|
2013-09-26 13:01:37 +08:00 |
|
imx28.dtsi
|
ARM: mxs: dts: Enable DCP for MXS
|
2014-01-05 20:49:56 +08:00 |
|
imx31-bug.dts
|
|
|
|
imx31.dtsi
|
ARM: dts: imx: Add the missing cpus node
|
2013-08-22 23:29:01 +08:00 |
|
imx35-pinfunc.h
|
|
|
|
imx51-apf51.dts
|
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
|
2013-08-22 23:29:53 +08:00 |
|
imx51-apf51dev.dts
|
ARM: imx51-apf51dev: Add parallel display support
|
2013-10-08 14:36:33 +08:00 |
|
imx51-babbage.dts
|
ARM: dts: imx51-babbage: Make DVI and WVGA panel functional
|
2013-10-09 09:38:17 +08:00 |
|
imx51-pinfunc.h
|
|
|
|
imx51.dtsi
|
ARM: dts: i.MX51: Fix OTG PHY clock
|
2013-11-11 22:58:45 +08:00 |
|
imx53-ard.dts
|
|
|
|
imx53-evk.dts
|
|
|
|
imx53-m53evk.dts
|
ARM: mx5: Add support for DENX M53EVK
|
2013-06-17 16:04:16 +08:00 |
|
imx53-mba53.dts
|
ARM i.MX53: mba53: Fix PWM backlight DT node
|
2013-07-15 08:28:10 +08:00 |
|
imx53-pinfunc.h
|
|
|
|
imx53-qsb.dts
|
ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source
|
2013-10-06 19:53:22 +08:00 |
|
imx53-smd.dts
|
|
|
|
imx53-tqma53.dtsi
|
ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2
|
2013-06-17 16:04:26 +08:00 |
|
imx53-tx53.dtsi
|
ARM: dts: add Ka-Ro tx53 devicetree
|
2013-06-17 16:04:18 +08:00 |
|
imx53.dtsi
|
ARM: imx: add ocram clock for imx53
|
2013-08-22 23:29:46 +08:00 |
|
integrator.dtsi
|
ARM: integrator: move EBI to the device tree
|
2013-12-04 16:22:31 +01:00 |
|
integratorap.dts
|
ARM: integrator: core module registers from compatible strings
|
2013-10-16 14:10:14 +02:00 |
|
integratorcp.dts
|
ARM: integrator: pass parent IRQ to the SIC
|
2014-01-03 22:26:22 +01:00 |
|
k2hk-evm.dts
|
ARM: dts: keystone: Add usb devicetree bindings
|
2013-12-12 20:29:17 -05:00 |
|
keystone-clocks.dtsi
|
ARM: keystone: dts: add paclk divider clock node
|
2013-12-12 20:29:17 -05:00 |
|
keystone.dtsi
|
ARM: dts: keystone: Add usb devicetree bindings
|
2013-12-12 20:29:17 -05:00 |
|
kirkwood-98dx4122.dtsi
|
|
|
|
kirkwood-6192.dtsi
|
ARM: Kirkwood: Add 6192 DTSI file
|
2013-12-25 02:03:36 +00:00 |
|
kirkwood-6281.dtsi
|
Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
|
2013-12-22 17:19:36 +00:00 |
|
kirkwood-6282.dtsi
|
ARM: kirkwood: 6282: sort DT nodes by address
|
2013-12-22 17:20:00 +00:00 |
|
kirkwood-cloudbox.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-db-88f6281.dts
|
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
|
2013-10-01 16:28:03 +00:00 |
|
kirkwood-db-88f6282.dts
|
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
|
2013-10-01 16:28:03 +00:00 |
|
kirkwood-db.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-dns320.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-dns325.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-dnskw.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-dockstar.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-dreamplug.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-goflexnet.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-guruplug-server-plus.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-ib62x0.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-iconnect.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-iomega_ix2_200.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-is2.dts
|
ARM: SoC board updates for 3.12
|
2013-09-06 13:34:43 -07:00 |
|
kirkwood-km_kirkwood.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-laplug.dts
|
ARM: Kirkwood: DT board setup for LaPlug
|
2013-12-25 02:03:52 +00:00 |
|
kirkwood-lschlv2.dts
|
ARM: kirkwood: Use the preprocessor on device tree files
|
2013-08-06 14:11:37 +00:00 |
|
kirkwood-lsxhl.dts
|
ARM: kirkwood: Use the preprocessor on device tree files
|
2013-08-06 14:11:37 +00:00 |
|
kirkwood-lsxl.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-mplcec4.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-mv88f6281gtw-ge.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-netgear_readynas_duo_v2.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-netgear_readynas_nv+_v2.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-ns2-common.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-ns2.dts
|
ARM: SoC board updates for 3.12
|
2013-09-06 13:34:43 -07:00 |
|
kirkwood-ns2lite.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-ns2max.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-ns2mini.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-nsa310-common.dtsi
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-nsa310.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-nsa310a.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-openblocks_a6.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-openblocks_a7.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-sheevaplug-common.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-sheevaplug-esata.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-sheevaplug.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-topkick.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kirkwood-ts219-6281.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-ts219-6282.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
|
kirkwood-ts219.dtsi
|
dt/bindings: Remove all references to device_type "ethernet-phy"
|
2014-01-16 11:11:51 +00:00 |
|
kirkwood.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
kizbox.dts
|
ARM: at91/dt: add watchdog properties to kizbox board
|
2014-01-28 21:33:38 +01:00 |
|
lpc32xx.dtsi
|
ARM: dts: lpc32xx: cpus/cpu nodes dts updates
|
2013-05-23 10:45:13 +01:00 |
|
Makefile
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
|
marco-evb.dts
|
|
|
|
marco.dtsi
|
|
|
|
mmp2-brownstone.dts
|
|
|
|
mmp2.dtsi
|
|
|
|
moxart-uc7112lx.dts
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
|
moxart.dtsi
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
|
mpa1600.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
mxs-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
|
nspire-classic.dtsi
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
|
nspire-clp.dts
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
|
nspire-cx.dts
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
|
nspire-tp.dts
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
|
nspire.dtsi
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
|
omap2.dtsi
|
ARM: dts: OMAP2: fix interrupt number for rng
|
2014-01-08 10:24:44 -08:00 |
|
omap3-beagle-xm.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
|
omap3-beagle.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
|
omap3-cm-t3x30.dtsi
|
ARM: dts: Add support for sbc-3xxx with cm-t3730
|
2013-12-18 13:13:21 -08:00 |
|
omap3-cm-t3730.dts
|
ARM: dts: Add support for sbc-3xxx with cm-t3730
|
2013-12-18 13:13:21 -08:00 |
|
omap3-devkit8000.dts
|
ARM: dts: omap3-devkit8000: fix a typo in GMPC node
|
2013-10-11 21:06:33 +02:00 |
|
omap3-evm-37xx.dts
|
ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
|
2013-10-14 11:34:37 -07:00 |
|
omap3-evm-common.dtsi
|
ARM: SoC DT updates for 3.13
|
2013-11-11 17:34:56 +09:00 |
|
omap3-evm.dts
|
ARM: dts: Add common support for omap3-evm
|
2013-10-14 11:34:37 -07:00 |
|
omap3-gta04.dts
|
ARM: dts: omap3: Adapt USB OTG to generic PHY framework
|
2013-10-20 19:16:08 +02:00 |
|
omap3-igep0020.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
|
omap3-igep0030.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
|
omap3-igep.dtsi
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
|
omap3-ldp.dts
|
ARM: dts: Add basic support for omap3 LDP zoom1 labrador
|
2013-11-25 15:15:39 -08:00 |
|
omap3-n9.dts
|
ARM: dts: add minimal DT support for Nokia N950 & N9 phones
|
2013-10-18 10:24:33 -07:00 |
|
omap3-n900.dts
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
|
omap3-n950-n9.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
|
omap3-n950.dts
|
ARM: dts: add minimal DT support for Nokia N950 & N9 phones
|
2013-10-18 10:24:33 -07:00 |
|
omap3-overo.dtsi
|
ARM: dts: omap: update usb_otg_hs data
|
2013-09-27 17:36:58 -07:00 |
|
omap3-sb-t35.dtsi
|
ARM: dts: Add support for sbc-3xxx with cm-t3730
|
2013-12-18 13:13:21 -08:00 |
|
omap3-sbc-t3730.dts
|
ARM: dts: Add support for sbc-3xxx with cm-t3730
|
2013-12-18 13:13:21 -08:00 |
|
omap3-tobi.dts
|
ARM: dts: omap3-tobi: Correct polarity for GPIO LED
|
2013-06-19 04:38:14 -05:00 |
|
omap3-zoom3.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
|
omap3.dtsi
|
The second half of the clock framework pull requeust for 3.14 is
|
2014-01-28 18:44:53 -08:00 |
|
omap3xxx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
|
omap4-cpu-thermal.dtsi
|
arm: dts: add omap4 CPU thermal data
|
2013-12-04 09:34:25 -04:00 |
|
omap4-panda-a4.dts
|
ARM: dts: OMAP2+: Use pinctrl constants
|
2013-06-18 18:53:40 -05:00 |
|
omap4-panda-common.dtsi
|
ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
|
2013-12-02 11:38:13 -08:00 |
|
omap4-panda-es.dts
|
ARM: dts: omap4-panda-es: Do not reset gpio1
|
2013-10-20 19:16:53 +02:00 |
|
omap4-panda.dts
|
ARM: dts: OMAP2+: Use #include for all device trees
|
2013-06-18 18:53:38 -05:00 |
|
omap4-sdp-es23plus.dts
|
ARM: dts: OMAP2+: Use pinctrl constants
|
2013-06-18 18:53:40 -05:00 |
|
omap4-sdp.dts
|
ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
|
2013-12-02 11:38:14 -08:00 |
|
omap4-var-som.dts
|
ARM: dts: OMAP4/5: Use existing constants for IRQs
|
2013-06-18 18:53:39 -05:00 |
|
omap4.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
|
omap5-core-thermal.dtsi
|
arm: dts: add omap5 CORE thermal data
|
2013-12-04 09:34:26 -04:00 |
|
omap5-gpu-thermal.dtsi
|
arm: dts: add omap5 GPU thermal data
|
2013-12-04 09:34:26 -04:00 |
|
omap5-uevm.dts
|
ARM: dts: omap5-uevm: Remove pinmux for dmic pins
|
2013-10-23 11:40:47 +02:00 |
|
omap5.dtsi
|
The second half of the clock framework pull requeust for 3.14 is
|
2014-01-28 18:44:53 -08:00 |
|
omap34xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
|
omap34xx-omap36xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
|
omap34xx.dtsi
|
The second half of the clock framework pull requeust for 3.14 is
|
2014-01-28 18:44:53 -08:00 |
|
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
|
omap36xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
|
omap36xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
|
omap36xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
|
omap36xx.dtsi
|
The second half of the clock framework pull requeust for 3.14 is
|
2014-01-28 18:44:53 -08:00 |
|
omap44xx-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
|
omap54xx-clocks.dtsi
|
ARM: dts: omap5 clock data
|
2014-01-17 12:36:01 -08:00 |
|
omap443x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
|
omap443x.dtsi
|
The second half of the clock framework pull requeust for 3.14 is
|
2014-01-28 18:44:53 -08:00 |
|
omap446x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
|
omap2420-h4.dts
|
ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
|
2013-10-08 17:51:40 +02:00 |
|
omap2420-n8x0-common.dtsi
|
ARM: OMAP2+: dts: add n8x0 onenand
|
2013-11-25 15:38:09 -08:00 |
|
omap2420-n800.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
|
omap2420-n810-wimax.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
|
omap2420-n810.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
|
omap2420.dtsi
|
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries
|
2013-11-15 14:35:29 -08:00 |
|
omap2430-sdp.dts
|
ARM: dts: Add basic device tree support for omap2430 sdp
|
2013-11-25 15:15:23 -08:00 |
|
omap2430.dtsi
|
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries
|
2013-11-15 14:35:29 -08:00 |
|
omap3430-sdp.dts
|
ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
|
2013-10-08 17:51:41 +02:00 |
|
omap3430es1-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
|
omap4460.dtsi
|
The second half of the clock framework pull requeust for 3.14 is
|
2014-01-28 18:44:53 -08:00 |
|
omap-gpmc-smsc911x.dtsi
|
ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
|
2013-12-02 11:38:15 -08:00 |
|
omap-zoom-common.dtsi
|
ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
|
2013-11-15 14:33:26 -08:00 |
|
orion5x-lacie-ethernet-disk-mini-v2.dts
|
dt/bindings: Remove all references to device_type "ethernet-phy"
|
2014-01-16 11:11:51 +00:00 |
|
orion5x.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
|
phy3250.dts
|
|
|
|
picoxcell-pc3x2.dtsi
|
ARM: dts: picoxcell: cpus/cpu nodes dts updates
|
2013-05-23 10:45:15 +01:00 |
|
picoxcell-pc3x3.dtsi
|
ARM: dts: picoxcell: cpus/cpu nodes dts updates
|
2013-05-23 10:45:15 +01:00 |
|
picoxcell-pc7302-pc3x2.dts
|
|
|
|
picoxcell-pc7302-pc3x3.dts
|
|
|
|
pm9g45.dts
|
ARM: at91: dt: switch to pinctrl to pre-processor
|
2013-05-17 12:11:39 +02:00 |
|
prima2-evb.dts
|
|
|
|
prima2.dtsi
|
ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
|
2014-01-09 20:05:31 +08:00 |
|
pxa2xx.dtsi
|
ARM: dts: pxa2xx: cpus/cpu nodes dts updates
|
2013-05-23 10:45:17 +01:00 |
|
pxa3xx.dtsi
|
ARM: pxa: DTS: override gpio node in pxa3xx.dtsi
|
2013-08-13 15:51:02 -07:00 |
|
pxa27x.dtsi
|
ARM: pxa: add PWM nodes to pxa27x.dtsi
|
2013-12-11 16:36:47 -08:00 |
|
pxa168-aspenite.dts
|
|
|
|
pxa168.dtsi
|
|
|
|
pxa910-dkb.dts
|
|
|
|
pxa910.dtsi
|
|
|
|
qcom-apq8074-dragonboard.dts
|
ARM: msm: Add support for APQ8074 Dragonboard
|
2014-01-02 11:24:44 -08:00 |
|
qcom-msm8660-surf.dts
|
ARM: dts: msm: Add clock controller nodes and hook into uart
|
2014-01-31 14:58:51 -08:00 |
|
qcom-msm8960-cdp.dts
|
ARM: dts: msm: Add clock controller nodes and hook into uart
|
2014-01-31 14:58:51 -08:00 |
|
qcom-msm8974.dtsi
|
ARM: dts: msm: Add clock controller nodes and hook into uart
|
2014-01-31 14:58:51 -08:00 |
|
r7s72100-genmai-reference.dts
|
ARM: shmobile: r7s72100 Genmai DT reference DTS bits
|
2013-12-10 17:24:23 +09:00 |
|
r7s72100-genmai.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
|
r7s72100.dtsi
|
ARM: shmobile: Initial r7s72100 SoC support
|
2013-10-08 09:53:00 +09:00 |
|
r8a73a4-ape6evm-reference.dts
|
ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref
|
2013-12-10 17:27:17 +09:00 |
|
r8a73a4-ape6evm.dts
|
ARM: shmobile: Include all 2 GiB of memory on APE6EVM
|
2013-12-10 17:27:17 +09:00 |
|
r8a73a4.dtsi
|
ARM: shmobile: r8a73a4: Specify PFC interrupts in DT
|
2013-12-19 20:01:32 +09:00 |
|
r8a7740-armadillo800eva-reference.dts
|
ARM: shmobile: armadillo: dts: Add gpio-keys device
|
2013-12-19 20:01:33 +09:00 |
|
r8a7740-armadillo800eva.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
|
r8a7740.dtsi
|
ARM: shmobile: r8a7740: Specify PFC interrupts in DT
|
2013-12-19 20:01:32 +09:00 |
|
r8a7778-bockw-reference.dts
|
ARM: shmobile: bockw-reference: Use falling edge IRQ for LAN9221
|
2013-12-10 17:27:08 +09:00 |
|
r8a7778-bockw.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
|
r8a7778.dtsi
|
ARM: shmobile: Use r8a7778 suffix for INTC compat string
|
2013-12-10 17:27:23 +09:00 |
|
r8a7779-marzen-reference.dts
|
ARM: shmobile: marzen: enable HSPI0 in DTS
|
2013-12-10 17:27:25 +09:00 |
|
r8a7779-marzen.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
|
r8a7779.dtsi
|
ARM: shmobile: r8a7779: add HSPI support to DTSI
|
2013-12-10 17:27:24 +09:00 |
|
r8a7790-lager.dts
|
ARM: shmobile: lager: Specify external clock frequency in DT
|
2013-12-19 20:01:34 +09:00 |
|
r8a7790.dtsi
|
Second Round of Renesas ARM Based SoC DT Fixes for v3.14
|
2014-01-31 15:08:10 -08:00 |
|
r8a7791-koelsch-reference.dts
|
ARM: shmobile: koelsch: dts: Add gpio-keys device
|
2013-12-12 22:22:04 +09:00 |
|
r8a7791-koelsch.dts
|
ARM: shmobile: koelsch: Specify external clock frequency in DT
|
2013-12-19 20:01:34 +09:00 |
|
r8a7791.dtsi
|
Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"
|
2013-12-26 14:16:54 +09:00 |
|
rk3xxx.dtsi
|
ARM: rockchip: enable arm-global-timer
|
2013-10-14 23:03:23 +02:00 |
|
rk3066a-bqcurie2.dts
|
ARM: rockchip: add dts for bqcurie2 tablet
|
2013-10-14 23:03:46 +02:00 |
|
rk3066a-clocks.dtsi
|
arm: Add basic clocks for Rockchip rk3066a SoCs
|
2013-06-21 09:20:56 +02:00 |
|
rk3066a.dtsi
|
ARM: SoC board updates for 3.13
|
2013-11-11 16:57:16 +09:00 |
|
rk3188-clocks.dtsi
|
ARM: rockchip: add support for rk3188 and Radxa Rock board
|
2013-10-14 23:04:09 +02:00 |
|
rk3188-radxarock.dts
|
ARM: rockchip: add support for rk3188 and Radxa Rock board
|
2013-10-14 23:04:09 +02:00 |
|
rk3188.dtsi
|
ARM: rockchip: add support for rk3188 and Radxa Rock board
|
2013-10-14 23:04:09 +02:00 |
|
s3c24xx.dtsi
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
|
s3c64xx-pinctrl.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
|
s3c64xx.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
|
s3c2416-pinctrl.dtsi
|
ARM: dts: add devicetree support for s3c2416-smdk2416
|
2013-05-21 01:06:12 +09:00 |
|
s3c2416-smdk2416.dts
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
|
s3c2416.dtsi
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
|
s3c6400.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
|
s3c6410-mini6410.dts
|
ARM: dts: Add dts file for S3C6410-based Mini6410 board
|
2013-09-17 06:48:29 +09:00 |
|
s3c6410-smdk6410.dts
|
ARM: dts: Add dts file for S3C6410-based SMDK6410 board
|
2013-09-17 06:48:29 +09:00 |
|
s3c6410.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
|
sama5d3_can.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
|
sama5d3_emac.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
|
sama5d3_gmac.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
|
sama5d3_lcd.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
|
sama5d3_mci2.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
|
sama5d3_tcb1.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
|
sama5d3_uart.dtsi
|
ARM: at91: add uart aliases to sama5d3 dtsi
|
2013-12-09 11:10:14 +01:00 |
|
sama5d3.dtsi
|
ARM: at91/dt: add sam9 watchdog default options to SoCs
|
2014-01-28 21:33:14 +01:00 |
|
sama5d3xcm.dtsi
|
ARM: at91/dt: remove old clk material
|
2013-12-02 15:31:29 +01:00 |
|
sama5d3xdm.dtsi
|
ARM: at91: sama5d3: enable qt1070 as a wakeup source
|
2013-12-09 11:10:12 +01:00 |
|
sama5d3xmb.dtsi
|
ARM: at91/dt: fix phy address in sama5xmb to match the reg property
|
2013-08-29 15:21:45 -04:00 |
|
sama5d31.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d31ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d33.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d33ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d34.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d34ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d35.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d35ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
|
sama5d36.dtsi
|
ARM: at91: sama5d3/dt: add sama5d36ek dts files
|
2013-12-10 09:59:57 -08:00 |
|
sama5d36ek.dts
|
ARM: at91: sama5d3/dt: add sama5d36ek dts files
|
2013-12-10 09:59:57 -08:00 |
|
samsung_k3pe0e000b.dtsi
|
|
|
|
sh73a0-kzm9g-reference.dts
|
ARM: shmobile: kzm9g: add FSI support for DTS
|
2013-12-12 21:07:37 +09:00 |
|
sh73a0-kzm9g.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
|
sh73a0.dtsi
|
ARM: shmobile: sh73a0: Specify PFC interrupts in DT
|
2013-12-19 20:01:32 +09:00 |
|
sh7372-mackerel.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
|
sh7372.dtsi
|
ARM: shmobile: sh7372: Add pin control device to device tree
|
2013-07-22 10:12:36 +09:00 |
|
skeleton64.dtsi
|
ARM: dts: Fix memory node in skeleton64.dtsi
|
2013-08-07 16:33:50 +00:00 |
|
skeleton.dtsi
|
|
|
|
socfpga_arria5_socdk.dts
|
dts: socfpga: Add support for Altera's SOCFPGA Arria V board
|
2013-10-09 16:58:31 -05:00 |
|
socfpga_arria5.dtsi
|
dts: socfpga: Add support for Altera's SOCFPGA Arria V board
|
2013-10-09 16:58:31 -05:00 |
|
socfpga_cyclone5_socdk.dts
|
ARM: socfpga: dts: Move common nodes to cyclone5 dtsi
|
2013-10-09 16:56:24 -05:00 |
|
socfpga_cyclone5_sockit.dts
|
ARM: socfpga: dts: Add support for terasic SoCkit
|
2013-10-09 16:57:08 -05:00 |
|
socfpga_cyclone5.dtsi
|
ARM: socfpga: dts: Move common nodes to cyclone5 dtsi
|
2013-10-09 16:56:24 -05:00 |
|
socfpga_vt.dts
|
ARM: socfpga: dts: Add ethernet bindings for SOCFPGA
|
2013-06-11 16:34:57 -07:00 |
|
socfpga.dtsi
|
ARM: dts: socfpga: add pl330 clock
|
2014-01-08 12:04:03 -06:00 |
|
spear3xx.dtsi
|
ARM: dts: spear: cpus/cpu nodes dts updates
|
2013-05-23 10:45:21 +01:00 |
|
spear13xx.dtsi
|
ARM: dts: spear: cpus/cpu nodes dts updates
|
2013-05-23 10:45:21 +01:00 |
|
spear300-evb.dts
|
|
|
|
spear300.dtsi
|
|
|
|
spear310-evb.dts
|
|
|
|
spear310.dtsi
|
|
|
|
spear320-evb.dts
|
|
|
|
spear320-hmi.dts
|
|
|
|
spear320.dtsi
|
|
|
|
spear600-evb.dts
|
|
|
|
spear600.dtsi
|
ARM: dts: spear: cpus/cpu nodes dts updates
|
2013-05-23 10:45:21 +01:00 |
|
spear1310-evb.dts
|
|
|
|
spear1310.dtsi
|
|
|
|
spear1340-evb.dts
|
|
|
|
spear1340.dtsi
|
ARM: arm-soc: late cleanups
|
2013-05-07 11:22:14 -07:00 |
|
st-pincfg.h
|
ARM: STi: OF: Fix a typo in pincfg header
|
2013-12-04 08:58:39 +00:00 |
|
ste-ccu8540-pinctrl.dtsi
|
ARM: ux500: fix devicetree builds
|
2013-08-14 22:32:07 +02:00 |
|
ste-ccu8540.dts
|
ARM: ux500: fix devicetree builds
|
2013-08-14 22:32:07 +02:00 |
|
ste-ccu9540.dts
|
ARM: ux500: fix devicetree builds
|
2013-08-14 22:32:07 +02:00 |
|
ste-dbx5x0.dtsi
|
ARM: ux500: create MCDE node to collect resources
|
2013-11-26 21:01:55 +01:00 |
|
ste-href-family-pinctrl.dtsi
|
ARM: ux500: move the WLAN GPIO pin setup to the device tree
|
2013-11-26 21:01:56 +01:00 |
|
ste-href-stuib.dtsi
|
ARM: ux500: move GPIO key configuration to device tree
|
2013-11-26 21:01:56 +01:00 |
|
ste-href-tvk1281618.dtsi
|
ARM: ux500: move GPIO key configuration to device tree
|
2013-11-26 21:01:56 +01:00 |
|
ste-href.dtsi
|
ARM: ux500: Refactor common DT configs for sdi[n] devices
|
2013-12-13 10:25:37 +01:00 |
|
ste-hrefprev60-stuib.dts
|
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
|
2013-10-03 10:29:24 +02:00 |
|
ste-hrefprev60-tvk.dts
|
ARM: ux500: split the HREF DTS files from two to four
|
2013-10-02 16:17:04 +02:00 |
|
ste-hrefprev60.dtsi
|
ARM: ux500: Configure regulator for I/O voltage for SD-card slot
|
2013-12-13 10:27:58 +01:00 |
|
ste-hrefv60plus-stuib.dts
|
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
|
2013-10-03 10:29:24 +02:00 |
|
ste-hrefv60plus-tvk.dts
|
ARM: ux500: split the HREF DTS files from two to four
|
2013-10-02 16:17:04 +02:00 |
|
ste-hrefv60plus.dtsi
|
ARM: ux500: Configure regulator for I/O voltage for SD-card slot
|
2013-12-13 10:27:58 +01:00 |
|
ste-nomadik-pinctrl.dtsi
|
ARM: ux500: move GPIO key configuration to device tree
|
2013-11-26 21:01:56 +01:00 |
|
ste-nomadik-s8815.dts
|
ARM: nomadik: get rid of explicit ethernet GPIO management
|
2013-11-28 21:08:42 +01:00 |
|
ste-nomadik-stn8815.dtsi
|
ARM: nomadik: Remove '0x's from nomadik stn8815 DTS file
|
2013-11-28 21:08:42 +01:00 |
|
ste-snowball.dts
|
ARM: ux500: Configure regulator for I/O voltage for SD-card slot
|
2013-12-13 10:27:58 +01:00 |
|
ste-u300.dts
|
ARM: u300: Remove '0x's from U300 DTS file
|
2013-11-26 21:00:21 +01:00 |
|
stih41x-b2000.dtsi
|
ARM: STi: Add I2C config to B2000 and B2020 boards
|
2013-12-04 09:00:31 +00:00 |
|
stih41x-b2020.dtsi
|
ARM: STi: Add I2C config to B2000 and B2020 boards
|
2013-12-04 09:00:31 +00:00 |
|
stih41x.dtsi
|
ARM: STi: Fix cpu nodes with correct device_type.
|
2013-08-04 13:40:48 -07:00 |
|
stih415-b2000.dts
|
ARM: stih41x: Add B2000 board support
|
2013-06-25 13:42:50 -07:00 |
|
stih415-b2020.dts
|
ARM: stih41x: Add B2020 board support
|
2013-06-25 13:42:51 -07:00 |
|
stih415-clock.dtsi
|
ARM: sti: Add STiH415 SOC support
|
2013-06-25 13:26:47 -07:00 |
|
stih415-pinctrl.dtsi
|
ARM: STi: Supply I2C configuration to STiH415 SoC
|
2013-12-04 09:00:18 +00:00 |
|
stih415.dtsi
|
ARM: STi: Supply I2C configuration to STiH415 SoC
|
2013-12-04 09:00:18 +00:00 |
|
stih416-b2000.dts
|
ARM: stih41x: Add B2000 board support
|
2013-06-25 13:42:50 -07:00 |
|
stih416-b2020.dts
|
ARM: stih41x: Add B2020 board support
|
2013-06-25 13:42:51 -07:00 |
|
stih416-clock.dtsi
|
ARM: sti: Add STiH416 SOC support
|
2013-06-25 13:26:58 -07:00 |
|
stih416-pinctrl.dtsi
|
ARM: STi: Supply I2C configuration to STiH416 SoC
|
2013-12-04 08:59:55 +00:00 |
|
stih416.dtsi
|
ARM: STi: Supply I2C configuration to STiH416 SoC
|
2013-12-04 08:59:55 +00:00 |
|
sun4i-a10-a1000.dts
|
ARM: sun4i: dt: Move the aliases to the DTSI
|
2013-12-29 23:03:16 +01:00 |
|
sun4i-a10-cubieboard.dts
|
ARM: sun4i: dt: Remove chosen nodes
|
2013-12-29 23:03:18 +01:00 |
|
sun4i-a10-hackberry.dts
|
ARM: sun4i: dt: Remove chosen nodes
|
2013-12-29 23:03:18 +01:00 |
|
sun4i-a10-mini-xplus.dts
|
ARM: sun4i: dt: Remove chosen nodes
|
2013-12-29 23:03:18 +01:00 |
|
sun4i-a10.dtsi
|
ARM: dts: sun4i: Add rtp controller node
|
2014-01-01 23:49:31 +01:00 |
|
sun5i-a10s-olinuxino-micro.dts
|
ARM: sun5i: dt: Fix A10s SoC bus base address
|
2013-08-10 19:13:44 +02:00 |
|
sun5i-a10s.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
|
sun5i-a13-olinuxino-micro.dts
|
ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
|
2013-12-16 11:51:17 +01:00 |
|
sun5i-a13-olinuxino.dts
|
ARM: sun4i: dt: Remove chosen nodes
|
2013-12-29 23:03:18 +01:00 |
|
sun5i-a13.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
|
sun6i-a31-colombus.dts
|
ARM: sun6i: colombus: Add uart0 muxing
|
2013-08-22 00:19:17 +02:00 |
|
sun6i-a31.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
|
sun7i-a20-cubieboard2.dts
|
ARM: sun7i: cubieboard2: Enable the I2C controllers
|
2013-09-18 11:35:38 -05:00 |
|
sun7i-a20-cubietruck.dts
|
arm: sun7i: cubietruck: Enable the i2c controllers
|
2014-01-07 23:39:19 +01:00 |
|
sun7i-a20-olinuxino-micro.dts
|
ARM: sun7i: olinuxino-micro: Enable the I2C controllers
|
2013-09-18 11:35:38 -05:00 |
|
sun7i-a20.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
|
tegra20-colibri-512.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
|
tegra20-harmony.dts
|
ARM: tegra: Enable LVDS on Harmony
|
2013-12-19 13:07:37 -07:00 |
|
tegra20-iris-512.dts
|
ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
|
2013-12-16 14:09:20 -07:00 |
|
tegra20-medcom-wide.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
|
tegra20-paz00.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
|
tegra20-plutux.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
|
tegra20-seaboard.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
|
tegra20-tamonten.dtsi
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
|
tegra20-tec.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
|
tegra20-trimslice.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
|
tegra20-ventana.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
|
tegra20-whistler.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
|
tegra20.dtsi
|
ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
|
2013-12-16 14:09:20 -07:00 |
|
tegra30-beaver.dts
|
ARM: tegra: enable USB2 on Tegra30 Beaver
|
2013-12-20 09:48:57 -07:00 |
|
tegra30-cardhu-a02.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
|
tegra30-cardhu-a04.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
|
tegra30-cardhu.dtsi
|
ARM: tegra: Enable LVDS on Cardhu
|
2013-12-19 13:07:38 -07:00 |
|
tegra30.dtsi
|
ARM: tegra: modify Tegra30 USB2 default phy_type to UTMI
|
2013-12-20 09:48:56 -07:00 |
|
tegra114-dalmore.dts
|
ARM: tegra: Enable HDMI support on Dalmore
|
2013-12-19 17:07:55 -07:00 |
|
tegra114.dtsi
|
ARM: tegra: Add Tegra114 gr3d support
|
2013-12-19 17:07:54 -07:00 |
|
tegra124-venice2.dts
|
ARM: tegra: Enable power key on Venice2
|
2013-12-20 10:55:34 -07:00 |
|
tegra124.dtsi
|
ARM: tegra: Add SPI controller nodes for Tegra124
|
2013-12-16 14:09:22 -07:00 |
|
tny_a9g20.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
tny_a9260_common.dtsi
|
|
|
|
tny_a9260.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
|
tny_a9263.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
tps6507x.dtsi
|
|
|
|
tps65217.dtsi
|
|
|
|
tps65910.dtsi
|
|
|
|
twl4030_omap3.dtsi
|
ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line
|
2013-06-18 18:53:45 -05:00 |
|
twl4030.dtsi
|
Highlights:
|
2013-11-18 15:35:09 -08:00 |
|
twl6030_omap4.dtsi
|
ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
|
2013-10-08 17:51:41 +02:00 |
|
twl6030.dtsi
|
|
|
|
usb_a9g20_common.dtsi
|
ARM: at91: dt: add Calao USB-A9G20 low power version
|
2013-05-31 16:52:37 +02:00 |
|
usb_a9g20_lpw.dts
|
ARM: at91: dt: add Calao USB-A9G20 low power version
|
2013-05-31 16:52:37 +02:00 |
|
usb_a9g20-dab-mmx.dtsi
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
usb_a9g20.dts
|
ARM: at91: dt: add Calao USB-A9G20 low power version
|
2013-05-31 16:52:37 +02:00 |
|
usb_a9260_common.dtsi
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
|
usb_a9260.dts
|
ARM: at91: dt: usb-a9260: update shutdown controller
|
2013-05-31 16:52:35 +02:00 |
|
usb_a9263.dts
|
ARM: at91: dt: usb-a9263: add dataflash support
|
2013-05-31 16:52:36 +02:00 |
|
versatile-ab.dts
|
arm/versatile: Fix versatile irq specifications.
|
2013-10-28 16:50:11 -07:00 |
|
versatile-pb.dts
|
arm/versatile: Fix versatile irq specifications.
|
2013-10-28 16:50:11 -07:00 |
|
vexpress-v2m-rs1.dtsi
|
|
|
|
vexpress-v2m.dtsi
|
|
|
|
vexpress-v2p-ca5s.dts
|
|
|
|
vexpress-v2p-ca9.dts
|
|
|
|
vexpress-v2p-ca15_a7.dts
|
ARM: SoC late changes for v3.12
|
2013-09-09 16:35:29 -07:00 |
|
vexpress-v2p-ca15-tc1.dts
|
|
|
|
vf610-cosmic.dts
|
ARM: dts: add initial VF610 Cosmic/Cosmic+ board support
|
2013-09-26 13:01:38 +08:00 |
|
vf610-pinfunc.h
|
ARM: dts: add SoC level device tree source for VF610
|
2013-06-17 16:04:23 +08:00 |
|
vf610-twr.dts
|
ARM: dts: vf610-twr: Enable DSPI0 devices and Flash at26df081a
|
2013-09-26 13:01:33 +08:00 |
|
vf610.dtsi
|
ARM: dts: vf610: Add DSPI nodes
|
2013-09-26 13:01:33 +08:00 |
|
vt8500-bv07.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
|
vt8500.dtsi
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
|
wm8505-ref.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
|
wm8505.dtsi
|
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
|
2013-05-12 20:31:15 +12:00 |
|
wm8650-mid.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
|
wm8650.dtsi
|
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
|
2013-05-12 20:31:15 +12:00 |
|
wm8750-apc8750.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
|
wm8750.dtsi
|
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
|
2013-05-12 20:31:15 +12:00 |
|
wm8850-w70v2.dts
|
ARM: dts: Use the PWM polarity flags
|
2013-09-03 13:08:11 +02:00 |
|
wm8850.dtsi
|
dts: vt8500: Correct reference clock on WM8850 SoCs
|
2013-06-04 07:31:22 +12:00 |
|
xenvm-4.2.dts
|
xenvm: add a simple PSCI node and a second cpu
|
2013-04-25 16:46:09 +00:00 |
|
zynq-7000.dtsi
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |
|
zynq-zc702.dts
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |
|
zynq-zc706.dts
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |
|
zynq-zed.dts
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |
f5ecc32ffd