linux/arch/powerpc/sysdev
Benjamin Herrenschmidt 1ac00cc213 powerpc/44x: Fix address decoding setup of PCI 2.x cells
The PCI 2.x cells used on some 44x SoCs only let us configure the decode
for the low 32-bit of the incoming PLB addresses. The top 4 bits (this
is a 36-bit bus) are hard wired to different values depending on the
specific SoC in use. Our code used to work "by accident" until I added
support for the ISA memory holes and while at it added more validity
checking of the addresses.

This patch should bring it back to working condition. It still relies
on the device-tree being correct but that's somewhat a pre-requisite
for anything to work anyway.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-27 09:30:17 +11:00
..
bestcomm powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver 2008-12-21 02:54:29 -07:00
qe_lib powerpc/qe: Select QE_USB with USB_GADGET_FSL_QE 2008-12-30 12:12:12 -06:00
6xx-suspend.S [POWERPC] Add 6xx-style HID0_SLEEP support. 2008-05-16 23:22:28 +10:00
axonram.c powerpc/axonram: Enable partitioning of the Axons DDR2 DIMMs 2008-07-22 10:39:31 +10:00
cpm1.c powerpc/cpm1: Fix race condition in CPM1 GPIO library. 2008-09-16 13:43:24 -05:00
cpm2_pic.c powerpc/cpm2: Fix set interrupt type 2009-02-06 10:44:02 -06:00
cpm2_pic.h
cpm2.c cpm2: Rework baud rate generators configuration to support external clocks. 2008-07-28 08:47:45 -05:00
cpm_common.c cpm2: Fix race condition in CPM2 GPIO library. 2008-08-21 00:15:54 -05:00
dart_iommu.c powerpc/pseries: iommu enablement for CMO 2008-07-25 15:44:43 +10:00
dart.h
dcr-low.S powerpc/4xx: Extended DCR support v2 2008-12-21 14:21:15 +11:00
dcr.c powerpc: Const-qualify Device Node Argument to DCR Resource Extent API 2008-12-21 14:21:16 +11:00
fsl_gtm.c powerpc/sysdev: implement FSL GTM support 2008-06-10 10:38:50 -05:00
fsl_lbc.c powerpc: fix fsl_upm nand driver modular build 2008-10-13 11:48:24 -05:00
fsl_msi.c powerpc: Convert the FSL MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
fsl_msi.h powerpc: Convert the FSL MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
fsl_pci.c powerpc/fsl-pci: Set relaxed ordering on prefetchable ranges 2009-01-07 15:33:05 -06:00
fsl_pci.h powerpc: Move mpc83xx_add_bridge to fsl_pci.c 2008-07-16 17:57:35 -05:00
fsl_rio.c [RAPIDIO] fix current kernel-doc notation 2008-05-01 23:01:54 -05:00
fsl_soc.c gianfar: Convert gianfar to an of_platform_driver 2008-12-16 15:29:15 -08:00
fsl_soc.h powerpc: Implement get_brgfreq() and get_baudrate() stubs 2008-12-30 11:13:40 -06:00
grackle.c powerpc: Introduce ppc_pci_flags accessors 2008-12-16 15:53:16 +11:00
i8259.c powerpc: Fix irq_alloc_host() reference counting and callers 2008-06-09 13:51:16 +10:00
indirect_pci.c powerpc/4xx: Workaround for PPC440EPx/GRx PCI_28 Errata 2008-06-17 19:01:38 -04:00
ipic.c powerpc/83xx: Build breakage for CONFIG_PM but no CONFIG_SUSPEND 2009-02-06 10:36:44 -06:00
ipic.h [POWERPC] ipic: ack only for edge interrupts 2007-12-12 01:53:07 -06:00
Kconfig powerpc: Move 8xxx GPIO Kconfig under the platform menu 2008-09-23 23:36:32 -05:00
Makefile powerpc: Implement GPIO driver for simple memory-mapped banks 2008-12-30 11:13:45 -06:00
micropatch.c [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c 2008-01-28 08:31:05 -06:00
mmio_nvram.c [POWERPC] arch/powerpc/: Spelling fixes 2007-12-20 16:15:51 +11:00
mpc8xx_pic.c [POWERPC] arch/powerpc/sysdev: Add missing of_node_put 2008-02-06 22:06:59 +11:00
mpc8xx_pic.h [POWERPC] 8xx: mpc885ads pcmcia support 2007-07-10 00:33:51 -05:00
mpc8xxx_gpio.c powerpc: gpio driver for mpc8349/8572/8610 and compatible 2008-09-23 10:41:16 -05:00
mpic_msi.c powerpc: Convert the MPIC MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
mpic_pasemi_msi.c powerpc: Convert the MPIC MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
mpic_u3msi.c powerpc: Convert the MPIC MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
mpic.c powerpc: Change u64/s64 to a long long integer type 2009-01-13 14:47:59 +11:00
mpic.h cpumask: make irq_set_affinity() take a const struct cpumask 2008-12-13 21:20:26 +10:30
msi_bitmap.c powerpc: Split-out common MSI bitmap logic into msi_bitmap.c 2008-08-20 16:34:57 +10:00
mv64x60_dev.c mv643xx_eth: remove force_phy_addr field 2008-09-05 06:33:59 +02:00
mv64x60_pci.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
mv64x60_pic.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
mv64x60_udbg.c [POWERPC] Fix mv64x60 early console code to use cell-index property 2008-04-24 20:57:34 +10:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
of_rtc.c [POWERPC] Enable RTC for Ebony and Walnut (v2) 2008-01-25 07:07:26 -06:00
pmi.c [POWERPC] Clean out asm/of_{platform, device}.h from sysdev/ 2007-12-06 14:44:30 +11:00
ppc4xx_gpio.c powerpc/4xx: Add PowerPC 4xx GPIO driver 2008-10-17 13:33:44 -04:00
ppc4xx_pci.c powerpc/44x: Fix address decoding setup of PCI 2.x cells 2009-02-27 09:30:17 +11:00
ppc4xx_pci.h [POWERPC] 4xx: Add 460EX PCIe support to 4xx pci driver 2008-03-26 07:19:16 -05:00
ppc4xx_soc.c [POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.c 2008-04-02 20:44:56 -05:00
rtc_cmos_setup.c powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC 2008-07-28 08:47:38 -05:00
simple_gpio.c powerpc: Implement GPIO driver for simple memory-mapped banks 2008-12-30 11:13:45 -06:00
simple_gpio.h powerpc: Implement GPIO driver for simple memory-mapped banks 2008-12-30 11:13:45 -06:00
tsi108_dev.c [POWERPC] Replace remaining __FUNCTION__ occurrences 2008-04-01 20:43:09 +11:00
tsi108_pci.c powerpc: Fix irq_alloc_host() reference counting and callers 2008-06-09 13:51:16 +10:00
uic.c powerpc: Fix irq_alloc_host() reference counting and callers 2008-06-09 13:51:16 +10:00
xilinx_intc.c powerpc/virtex: fix various format/casting printk mismatches 2008-11-14 09:59:48 -07:00