forked from Minki/linux
f5c3ef21db
Check for the presence of the '/cpus' OF node before dereferencing it blindly: [ 4.181793] Unable to handle kernel NULL pointer dereference at virtual address 0000001c [ 4.181793] pgd = c0004000 [ 4.181823] [0000001c] *pgd=00000000 [ 4.181823] Internal error: Oops: 5 [#1] SMP ARM [ 4.181823] Modules linked in: [ 4.181823] CPU: 1 Tainted: G W (3.8.0-15-generic #25~hbankD) [ 4.181854] PC is at of_get_next_child+0x64/0x70 [ 4.181854] LR is at of_get_next_child+0x24/0x70 [ 4.181854] pc : [<c04fda18>] lr : [<c04fd9d8>] psr: 60000113 [ 4.181854] sp : ed891ec0 ip : ed891ec0 fp : ed891ed4 [ 4.181884] r10: c04dafd0 r9 : c098690c r8 : c0936208 [ 4.181884] r7 : ed890000 r6 : c0a63d00 r5 : 00000000 r4 : 00000000 [ 4.181884] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : c0b2acc8 [ 4.181884] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 4.181884] Control: 10c5387d Table: adcb804a DAC: 00000015 [ 4.181915] Process swapper/0 (pid: 1, stack limit = 0xed890238) [ 4.181915] Stack: (0xed891ec0 to 0xed892000) [ 4.181915] 1ec0: c09b7b70 00000007 ed891efc ed891ed8 c04daff4 c04fd9c0 00000000 c09b7b70 [ 4.181915] 1ee0: 00000007 c0a63d00 ed890000 c0936208 ed891f54 ed891f00 c00088e0 c04dafdc [ 4.181945] 1f00: ed891f54 ed891f10 c006e940 00000000 00000000 00000007 00000007 c08a4914 [ 4.181945] 1f20: 00000000 c07dbd30 c0a63d00 c09b7b70 00000007 c0a63d00 000000bc c0936208 [ 4.181945] 1f40: c098690c c0986914 ed891f94 ed891f58 c0936a40 c00087bc 00000007 00000007 [ 4.181976] 1f60: c0936208 be8bda20 b6eea010 c0a63d00 c064547c 00000000 00000000 00000000 [ 4.181976] 1f80: 00000000 00000000 ed891fac ed891f98 c0645498 c09368c8 00000000 00000000 [ 4.181976] 1fa0: 00000000 ed891fb0 c0014658 c0645488 00000000 00000000 00000000 00000000 [ 4.182006] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.182006] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.182037] [<c04fda18>] (of_get_next_child+0x64/0x70) from [<c04daff4>] (cpu0_cpufreq_driver_init+0x24/0x284) [ 4.182067] [<c04daff4>] (cpu0_cpufreq_driver_init+0x24/0x284) from [<c00088e0>] (do_one_initcall+0x130/0x1b0) [ 4.182067] [<c00088e0>] (do_one_initcall+0x130/0x1b0) from [<c0936a40>] (kernel_init_freeable+0x184/0x24c) [ 4.182098] [<c0936a40>] (kernel_init_freeable+0x184/0x24c) from [<c0645498>] (kernel_init+0x1c/0xf4) [ 4.182128] [<c0645498>] (kernel_init+0x1c/0xf4) from [<c0014658>] (ret_from_fork+0x14/0x20) [ 4.182128] Code: f57ff04f e320f004 e89da830 e89da830 (e595001c) [ 4.182128] ---[ end trace 634903a22e8609cb ]--- [ 4.182189] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.182189] [ 4.642395] CPU0: stopping [rjw: Changelog] Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
295 lines
7.0 KiB
C
295 lines
7.0 KiB
C
/*
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* The OPP code in function cpu0_set_target() is reused from
|
|
* drivers/cpufreq/omap-cpufreq.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/opp.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
static unsigned int transition_latency;
|
|
static unsigned int voltage_tolerance; /* in percentage */
|
|
|
|
static struct device *cpu_dev;
|
|
static struct clk *cpu_clk;
|
|
static struct regulator *cpu_reg;
|
|
static struct cpufreq_frequency_table *freq_table;
|
|
|
|
static int cpu0_verify_speed(struct cpufreq_policy *policy)
|
|
{
|
|
return cpufreq_frequency_table_verify(policy, freq_table);
|
|
}
|
|
|
|
static unsigned int cpu0_get_speed(unsigned int cpu)
|
|
{
|
|
return clk_get_rate(cpu_clk) / 1000;
|
|
}
|
|
|
|
static int cpu0_set_target(struct cpufreq_policy *policy,
|
|
unsigned int target_freq, unsigned int relation)
|
|
{
|
|
struct cpufreq_freqs freqs;
|
|
struct opp *opp;
|
|
unsigned long freq_Hz, volt = 0, volt_old = 0, tol = 0;
|
|
unsigned int index, cpu;
|
|
int ret;
|
|
|
|
ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
|
|
relation, &index);
|
|
if (ret) {
|
|
pr_err("failed to match target freqency %d: %d\n",
|
|
target_freq, ret);
|
|
return ret;
|
|
}
|
|
|
|
freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
|
|
if (freq_Hz < 0)
|
|
freq_Hz = freq_table[index].frequency * 1000;
|
|
freqs.new = freq_Hz / 1000;
|
|
freqs.old = clk_get_rate(cpu_clk) / 1000;
|
|
|
|
if (freqs.old == freqs.new)
|
|
return 0;
|
|
|
|
for_each_online_cpu(cpu) {
|
|
freqs.cpu = cpu;
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
}
|
|
|
|
if (cpu_reg) {
|
|
rcu_read_lock();
|
|
opp = opp_find_freq_ceil(cpu_dev, &freq_Hz);
|
|
if (IS_ERR(opp)) {
|
|
rcu_read_unlock();
|
|
pr_err("failed to find OPP for %ld\n", freq_Hz);
|
|
return PTR_ERR(opp);
|
|
}
|
|
volt = opp_get_voltage(opp);
|
|
rcu_read_unlock();
|
|
tol = volt * voltage_tolerance / 100;
|
|
volt_old = regulator_get_voltage(cpu_reg);
|
|
}
|
|
|
|
pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
|
|
freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
|
|
freqs.new / 1000, volt ? volt / 1000 : -1);
|
|
|
|
/* scaling up? scale voltage before frequency */
|
|
if (cpu_reg && freqs.new > freqs.old) {
|
|
ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
|
|
if (ret) {
|
|
pr_err("failed to scale voltage up: %d\n", ret);
|
|
freqs.new = freqs.old;
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = clk_set_rate(cpu_clk, freqs.new * 1000);
|
|
if (ret) {
|
|
pr_err("failed to set clock rate: %d\n", ret);
|
|
if (cpu_reg)
|
|
regulator_set_voltage_tol(cpu_reg, volt_old, tol);
|
|
return ret;
|
|
}
|
|
|
|
/* scaling down? scale voltage after frequency */
|
|
if (cpu_reg && freqs.new < freqs.old) {
|
|
ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
|
|
if (ret) {
|
|
pr_err("failed to scale voltage down: %d\n", ret);
|
|
clk_set_rate(cpu_clk, freqs.old * 1000);
|
|
freqs.new = freqs.old;
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
for_each_online_cpu(cpu) {
|
|
freqs.cpu = cpu;
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
|
|
{
|
|
int ret;
|
|
|
|
if (policy->cpu != 0)
|
|
return -EINVAL;
|
|
|
|
ret = cpufreq_frequency_table_cpuinfo(policy, freq_table);
|
|
if (ret) {
|
|
pr_err("invalid frequency table: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
policy->cpuinfo.transition_latency = transition_latency;
|
|
policy->cur = clk_get_rate(cpu_clk) / 1000;
|
|
|
|
/*
|
|
* The driver only supports the SMP configuartion where all processors
|
|
* share the clock and voltage and clock. Use cpufreq affected_cpus
|
|
* interface to have all CPUs scaled together.
|
|
*/
|
|
cpumask_setall(policy->cpus);
|
|
|
|
cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cpu0_cpufreq_exit(struct cpufreq_policy *policy)
|
|
{
|
|
cpufreq_frequency_table_put_attr(policy->cpu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct freq_attr *cpu0_cpufreq_attr[] = {
|
|
&cpufreq_freq_attr_scaling_available_freqs,
|
|
NULL,
|
|
};
|
|
|
|
static struct cpufreq_driver cpu0_cpufreq_driver = {
|
|
.flags = CPUFREQ_STICKY,
|
|
.verify = cpu0_verify_speed,
|
|
.target = cpu0_set_target,
|
|
.get = cpu0_get_speed,
|
|
.init = cpu0_cpufreq_init,
|
|
.exit = cpu0_cpufreq_exit,
|
|
.name = "generic_cpu0",
|
|
.attr = cpu0_cpufreq_attr,
|
|
};
|
|
|
|
static int cpu0_cpufreq_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np, *parent;
|
|
int ret;
|
|
|
|
parent = of_find_node_by_path("/cpus");
|
|
if (!parent) {
|
|
pr_err("failed to find OF /cpus\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
for_each_child_of_node(parent, np) {
|
|
if (of_get_property(np, "operating-points", NULL))
|
|
break;
|
|
}
|
|
|
|
if (!np) {
|
|
pr_err("failed to find cpu0 node\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
cpu_dev = &pdev->dev;
|
|
cpu_dev->of_node = np;
|
|
|
|
cpu_clk = devm_clk_get(cpu_dev, NULL);
|
|
if (IS_ERR(cpu_clk)) {
|
|
ret = PTR_ERR(cpu_clk);
|
|
pr_err("failed to get cpu0 clock: %d\n", ret);
|
|
goto out_put_node;
|
|
}
|
|
|
|
cpu_reg = devm_regulator_get(cpu_dev, "cpu0");
|
|
if (IS_ERR(cpu_reg)) {
|
|
pr_warn("failed to get cpu0 regulator\n");
|
|
cpu_reg = NULL;
|
|
}
|
|
|
|
ret = of_init_opp_table(cpu_dev);
|
|
if (ret) {
|
|
pr_err("failed to init OPP table: %d\n", ret);
|
|
goto out_put_node;
|
|
}
|
|
|
|
ret = opp_init_cpufreq_table(cpu_dev, &freq_table);
|
|
if (ret) {
|
|
pr_err("failed to init cpufreq table: %d\n", ret);
|
|
goto out_put_node;
|
|
}
|
|
|
|
of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance);
|
|
|
|
if (of_property_read_u32(np, "clock-latency", &transition_latency))
|
|
transition_latency = CPUFREQ_ETERNAL;
|
|
|
|
if (cpu_reg) {
|
|
struct opp *opp;
|
|
unsigned long min_uV, max_uV;
|
|
int i;
|
|
|
|
/*
|
|
* OPP is maintained in order of increasing frequency, and
|
|
* freq_table initialised from OPP is therefore sorted in the
|
|
* same order.
|
|
*/
|
|
for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
|
|
;
|
|
rcu_read_lock();
|
|
opp = opp_find_freq_exact(cpu_dev,
|
|
freq_table[0].frequency * 1000, true);
|
|
min_uV = opp_get_voltage(opp);
|
|
opp = opp_find_freq_exact(cpu_dev,
|
|
freq_table[i-1].frequency * 1000, true);
|
|
max_uV = opp_get_voltage(opp);
|
|
rcu_read_unlock();
|
|
ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
|
|
if (ret > 0)
|
|
transition_latency += ret * 1000;
|
|
}
|
|
|
|
ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
|
|
if (ret) {
|
|
pr_err("failed register driver: %d\n", ret);
|
|
goto out_free_table;
|
|
}
|
|
|
|
of_node_put(np);
|
|
return 0;
|
|
|
|
out_free_table:
|
|
opp_free_cpufreq_table(cpu_dev, &freq_table);
|
|
out_put_node:
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
|
|
static int cpu0_cpufreq_remove(struct platform_device *pdev)
|
|
{
|
|
cpufreq_unregister_driver(&cpu0_cpufreq_driver);
|
|
opp_free_cpufreq_table(cpu_dev, &freq_table);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver cpu0_cpufreq_platdrv = {
|
|
.driver = {
|
|
.name = "cpufreq-cpu0",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = cpu0_cpufreq_probe,
|
|
.remove = cpu0_cpufreq_remove,
|
|
};
|
|
module_platform_driver(cpu0_cpufreq_platdrv);
|
|
|
|
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
|
|
MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
|
|
MODULE_LICENSE("GPL");
|