forked from Minki/linux
9d31d23389
Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- -independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q 5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9 wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr 7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5 pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2 B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY= =vcbA -----END PGP SIGNATURE----- Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
227 lines
6.5 KiB
C
227 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
* Copyright (C) 2020 Google LLC.
|
|
*/
|
|
|
|
#include <linux/filter.h>
|
|
#include <linux/bpf.h>
|
|
#include <linux/btf.h>
|
|
#include <linux/binfmts.h>
|
|
#include <linux/lsm_hooks.h>
|
|
#include <linux/bpf_lsm.h>
|
|
#include <linux/kallsyms.h>
|
|
#include <linux/bpf_verifier.h>
|
|
#include <net/bpf_sk_storage.h>
|
|
#include <linux/bpf_local_storage.h>
|
|
#include <linux/btf_ids.h>
|
|
#include <linux/ima.h>
|
|
|
|
/* For every LSM hook that allows attachment of BPF programs, declare a nop
|
|
* function where a BPF program can be attached.
|
|
*/
|
|
#define LSM_HOOK(RET, DEFAULT, NAME, ...) \
|
|
noinline RET bpf_lsm_##NAME(__VA_ARGS__) \
|
|
{ \
|
|
return DEFAULT; \
|
|
}
|
|
|
|
#include <linux/lsm_hook_defs.h>
|
|
#undef LSM_HOOK
|
|
|
|
#define LSM_HOOK(RET, DEFAULT, NAME, ...) BTF_ID(func, bpf_lsm_##NAME)
|
|
BTF_SET_START(bpf_lsm_hooks)
|
|
#include <linux/lsm_hook_defs.h>
|
|
#undef LSM_HOOK
|
|
BTF_SET_END(bpf_lsm_hooks)
|
|
|
|
int bpf_lsm_verify_prog(struct bpf_verifier_log *vlog,
|
|
const struct bpf_prog *prog)
|
|
{
|
|
if (!prog->gpl_compatible) {
|
|
bpf_log(vlog,
|
|
"LSM programs must have a GPL compatible license\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!btf_id_set_contains(&bpf_lsm_hooks, prog->aux->attach_btf_id)) {
|
|
bpf_log(vlog, "attach_btf_id %u points to wrong type name %s\n",
|
|
prog->aux->attach_btf_id, prog->aux->attach_func_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Mask for all the currently supported BPRM option flags */
|
|
#define BPF_F_BRPM_OPTS_MASK BPF_F_BPRM_SECUREEXEC
|
|
|
|
BPF_CALL_2(bpf_bprm_opts_set, struct linux_binprm *, bprm, u64, flags)
|
|
{
|
|
if (flags & ~BPF_F_BRPM_OPTS_MASK)
|
|
return -EINVAL;
|
|
|
|
bprm->secureexec = (flags & BPF_F_BPRM_SECUREEXEC);
|
|
return 0;
|
|
}
|
|
|
|
BTF_ID_LIST_SINGLE(bpf_bprm_opts_set_btf_ids, struct, linux_binprm)
|
|
|
|
static const struct bpf_func_proto bpf_bprm_opts_set_proto = {
|
|
.func = bpf_bprm_opts_set,
|
|
.gpl_only = false,
|
|
.ret_type = RET_INTEGER,
|
|
.arg1_type = ARG_PTR_TO_BTF_ID,
|
|
.arg1_btf_id = &bpf_bprm_opts_set_btf_ids[0],
|
|
.arg2_type = ARG_ANYTHING,
|
|
};
|
|
|
|
BPF_CALL_3(bpf_ima_inode_hash, struct inode *, inode, void *, dst, u32, size)
|
|
{
|
|
return ima_inode_hash(inode, dst, size);
|
|
}
|
|
|
|
static bool bpf_ima_inode_hash_allowed(const struct bpf_prog *prog)
|
|
{
|
|
return bpf_lsm_is_sleepable_hook(prog->aux->attach_btf_id);
|
|
}
|
|
|
|
BTF_ID_LIST_SINGLE(bpf_ima_inode_hash_btf_ids, struct, inode)
|
|
|
|
static const struct bpf_func_proto bpf_ima_inode_hash_proto = {
|
|
.func = bpf_ima_inode_hash,
|
|
.gpl_only = false,
|
|
.ret_type = RET_INTEGER,
|
|
.arg1_type = ARG_PTR_TO_BTF_ID,
|
|
.arg1_btf_id = &bpf_ima_inode_hash_btf_ids[0],
|
|
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
|
|
.arg3_type = ARG_CONST_SIZE,
|
|
.allowed = bpf_ima_inode_hash_allowed,
|
|
};
|
|
|
|
static const struct bpf_func_proto *
|
|
bpf_lsm_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
|
|
{
|
|
switch (func_id) {
|
|
case BPF_FUNC_inode_storage_get:
|
|
return &bpf_inode_storage_get_proto;
|
|
case BPF_FUNC_inode_storage_delete:
|
|
return &bpf_inode_storage_delete_proto;
|
|
case BPF_FUNC_sk_storage_get:
|
|
return &bpf_sk_storage_get_proto;
|
|
case BPF_FUNC_sk_storage_delete:
|
|
return &bpf_sk_storage_delete_proto;
|
|
case BPF_FUNC_spin_lock:
|
|
return &bpf_spin_lock_proto;
|
|
case BPF_FUNC_spin_unlock:
|
|
return &bpf_spin_unlock_proto;
|
|
case BPF_FUNC_bprm_opts_set:
|
|
return &bpf_bprm_opts_set_proto;
|
|
case BPF_FUNC_ima_inode_hash:
|
|
return prog->aux->sleepable ? &bpf_ima_inode_hash_proto : NULL;
|
|
default:
|
|
return tracing_prog_func_proto(func_id, prog);
|
|
}
|
|
}
|
|
|
|
/* The set of hooks which are called without pagefaults disabled and are allowed
|
|
* to "sleep" and thus can be used for sleeable BPF programs.
|
|
*/
|
|
BTF_SET_START(sleepable_lsm_hooks)
|
|
BTF_ID(func, bpf_lsm_bpf)
|
|
BTF_ID(func, bpf_lsm_bpf_map)
|
|
BTF_ID(func, bpf_lsm_bpf_map_alloc_security)
|
|
BTF_ID(func, bpf_lsm_bpf_map_free_security)
|
|
BTF_ID(func, bpf_lsm_bpf_prog)
|
|
BTF_ID(func, bpf_lsm_bprm_check_security)
|
|
BTF_ID(func, bpf_lsm_bprm_committed_creds)
|
|
BTF_ID(func, bpf_lsm_bprm_committing_creds)
|
|
BTF_ID(func, bpf_lsm_bprm_creds_for_exec)
|
|
BTF_ID(func, bpf_lsm_bprm_creds_from_file)
|
|
BTF_ID(func, bpf_lsm_capget)
|
|
BTF_ID(func, bpf_lsm_capset)
|
|
BTF_ID(func, bpf_lsm_cred_prepare)
|
|
BTF_ID(func, bpf_lsm_file_ioctl)
|
|
BTF_ID(func, bpf_lsm_file_lock)
|
|
BTF_ID(func, bpf_lsm_file_open)
|
|
BTF_ID(func, bpf_lsm_file_receive)
|
|
|
|
#ifdef CONFIG_SECURITY_NETWORK
|
|
BTF_ID(func, bpf_lsm_inet_conn_established)
|
|
#endif /* CONFIG_SECURITY_NETWORK */
|
|
|
|
BTF_ID(func, bpf_lsm_inode_create)
|
|
BTF_ID(func, bpf_lsm_inode_free_security)
|
|
BTF_ID(func, bpf_lsm_inode_getattr)
|
|
BTF_ID(func, bpf_lsm_inode_getxattr)
|
|
BTF_ID(func, bpf_lsm_inode_mknod)
|
|
BTF_ID(func, bpf_lsm_inode_need_killpriv)
|
|
BTF_ID(func, bpf_lsm_inode_post_setxattr)
|
|
BTF_ID(func, bpf_lsm_inode_readlink)
|
|
BTF_ID(func, bpf_lsm_inode_rename)
|
|
BTF_ID(func, bpf_lsm_inode_rmdir)
|
|
BTF_ID(func, bpf_lsm_inode_setattr)
|
|
BTF_ID(func, bpf_lsm_inode_setxattr)
|
|
BTF_ID(func, bpf_lsm_inode_symlink)
|
|
BTF_ID(func, bpf_lsm_inode_unlink)
|
|
BTF_ID(func, bpf_lsm_kernel_module_request)
|
|
BTF_ID(func, bpf_lsm_kernfs_init_security)
|
|
|
|
#ifdef CONFIG_KEYS
|
|
BTF_ID(func, bpf_lsm_key_free)
|
|
#endif /* CONFIG_KEYS */
|
|
|
|
BTF_ID(func, bpf_lsm_mmap_file)
|
|
BTF_ID(func, bpf_lsm_netlink_send)
|
|
BTF_ID(func, bpf_lsm_path_notify)
|
|
BTF_ID(func, bpf_lsm_release_secctx)
|
|
BTF_ID(func, bpf_lsm_sb_alloc_security)
|
|
BTF_ID(func, bpf_lsm_sb_eat_lsm_opts)
|
|
BTF_ID(func, bpf_lsm_sb_kern_mount)
|
|
BTF_ID(func, bpf_lsm_sb_mount)
|
|
BTF_ID(func, bpf_lsm_sb_remount)
|
|
BTF_ID(func, bpf_lsm_sb_set_mnt_opts)
|
|
BTF_ID(func, bpf_lsm_sb_show_options)
|
|
BTF_ID(func, bpf_lsm_sb_statfs)
|
|
BTF_ID(func, bpf_lsm_sb_umount)
|
|
BTF_ID(func, bpf_lsm_settime)
|
|
|
|
#ifdef CONFIG_SECURITY_NETWORK
|
|
BTF_ID(func, bpf_lsm_socket_accept)
|
|
BTF_ID(func, bpf_lsm_socket_bind)
|
|
BTF_ID(func, bpf_lsm_socket_connect)
|
|
BTF_ID(func, bpf_lsm_socket_create)
|
|
BTF_ID(func, bpf_lsm_socket_getpeername)
|
|
BTF_ID(func, bpf_lsm_socket_getpeersec_dgram)
|
|
BTF_ID(func, bpf_lsm_socket_getsockname)
|
|
BTF_ID(func, bpf_lsm_socket_getsockopt)
|
|
BTF_ID(func, bpf_lsm_socket_listen)
|
|
BTF_ID(func, bpf_lsm_socket_post_create)
|
|
BTF_ID(func, bpf_lsm_socket_recvmsg)
|
|
BTF_ID(func, bpf_lsm_socket_sendmsg)
|
|
BTF_ID(func, bpf_lsm_socket_shutdown)
|
|
BTF_ID(func, bpf_lsm_socket_socketpair)
|
|
#endif /* CONFIG_SECURITY_NETWORK */
|
|
|
|
BTF_ID(func, bpf_lsm_syslog)
|
|
BTF_ID(func, bpf_lsm_task_alloc)
|
|
BTF_ID(func, bpf_lsm_task_getsecid_subj)
|
|
BTF_ID(func, bpf_lsm_task_getsecid_obj)
|
|
BTF_ID(func, bpf_lsm_task_prctl)
|
|
BTF_ID(func, bpf_lsm_task_setscheduler)
|
|
BTF_ID(func, bpf_lsm_task_to_inode)
|
|
BTF_SET_END(sleepable_lsm_hooks)
|
|
|
|
bool bpf_lsm_is_sleepable_hook(u32 btf_id)
|
|
{
|
|
return btf_id_set_contains(&sleepable_lsm_hooks, btf_id);
|
|
}
|
|
|
|
const struct bpf_prog_ops lsm_prog_ops = {
|
|
};
|
|
|
|
const struct bpf_verifier_ops lsm_verifier_ops = {
|
|
.get_func_proto = bpf_lsm_func_proto,
|
|
.is_valid_access = btf_ctx_access,
|
|
};
|