forked from Minki/linux
f5a8eb632b
This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s 3iIVHovno/JuJnTOE8LY =fQ8z -----END PGP SIGNATURE----- Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
600 lines
16 KiB
Plaintext
600 lines
16 KiB
Plaintext
menu "Clock Source drivers"
|
|
depends on GENERIC_CLOCKEVENTS
|
|
|
|
config TIMER_OF
|
|
bool
|
|
select TIMER_PROBE
|
|
|
|
config TIMER_ACPI
|
|
bool
|
|
select TIMER_PROBE
|
|
|
|
config TIMER_PROBE
|
|
bool
|
|
|
|
config CLKSRC_I8253
|
|
bool
|
|
|
|
config CLKEVT_I8253
|
|
bool
|
|
|
|
config I8253_LOCK
|
|
bool
|
|
|
|
config CLKBLD_I8253
|
|
def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
|
|
|
|
config CLKSRC_MMIO
|
|
bool
|
|
|
|
config BCM2835_TIMER
|
|
bool "BCM2835 timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the BCM2835 timer driver.
|
|
|
|
config BCM_KONA_TIMER
|
|
bool "BCM mobile timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the BCM Kona mobile timer driver.
|
|
|
|
config DIGICOLOR_TIMER
|
|
bool "Digicolor timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
depends on HAS_IOMEM
|
|
help
|
|
Enables the support for the digicolor timer driver.
|
|
|
|
config DW_APB_TIMER
|
|
bool "DW APB timer driver" if COMPILE_TEST
|
|
help
|
|
Enables the support for the dw_apb timer.
|
|
|
|
config DW_APB_TIMER_OF
|
|
bool
|
|
select DW_APB_TIMER
|
|
select TIMER_OF
|
|
|
|
config FTTMR010_TIMER
|
|
bool "Faraday Technology timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF
|
|
select MFD_SYSCON
|
|
help
|
|
Enables support for the Faraday Technology timer block
|
|
FTTMR010.
|
|
|
|
config ROCKCHIP_TIMER
|
|
bool "Rockchip timer driver" if COMPILE_TEST
|
|
depends on ARM || ARM64
|
|
select TIMER_OF
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the rockchip timer driver.
|
|
|
|
config ARMADA_370_XP_TIMER
|
|
bool "Armada 370 and XP timer driver" if COMPILE_TEST
|
|
depends on ARM
|
|
select TIMER_OF
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the Armada 370 and XP timer driver.
|
|
|
|
config MESON6_TIMER
|
|
bool "Meson6 timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the Meson6 timer driver.
|
|
|
|
config ORION_TIMER
|
|
bool "Orion timer driver" if COMPILE_TEST
|
|
depends on ARM
|
|
select TIMER_OF
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the Orion timer driver
|
|
|
|
config OWL_TIMER
|
|
bool "Owl timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the Actions Semi Owl timer driver.
|
|
|
|
config SUN4I_TIMER
|
|
bool "Sun4i timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF
|
|
help
|
|
Enables support for the Sun4i timer.
|
|
|
|
config SUN5I_HSTIMER
|
|
bool "Sun5i timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
depends on COMMON_CLK
|
|
help
|
|
Enables support the Sun5i timer.
|
|
|
|
config TEGRA_TIMER
|
|
bool "Tegra timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
depends on ARM
|
|
help
|
|
Enables support for the Tegra driver.
|
|
|
|
config VT8500_TIMER
|
|
bool "VT8500 timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
Enables support for the VT8500 driver.
|
|
|
|
config CADENCE_TTC_TIMER
|
|
bool "Cadence TTC timer driver" if COMPILE_TEST
|
|
depends on COMMON_CLK
|
|
help
|
|
Enables support for the cadence ttc driver.
|
|
|
|
config ASM9260_TIMER
|
|
bool "ASM9260 timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF
|
|
help
|
|
Enables support for the ASM9260 timer.
|
|
|
|
config CLKSRC_NOMADIK_MTU
|
|
bool "Nomakdik clocksource driver" if COMPILE_TEST
|
|
depends on ARM
|
|
select CLKSRC_MMIO
|
|
help
|
|
Support for Multi Timer Unit. MTU provides access
|
|
to multiple interrupt generating programmable
|
|
32-bit free running decrementing counters.
|
|
|
|
config CLKSRC_NOMADIK_MTU_SCHED_CLOCK
|
|
bool
|
|
depends on CLKSRC_NOMADIK_MTU
|
|
help
|
|
Use the Multi Timer Unit as the sched_clock.
|
|
|
|
config CLKSRC_DBX500_PRCMU
|
|
bool "Clocksource PRCMU Timer" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
Use the always on PRCMU Timer as clocksource
|
|
|
|
config CLPS711X_TIMER
|
|
bool "Cirrus logic timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables support for the Cirrus Logic PS711 timer.
|
|
|
|
config ATLAS7_TIMER
|
|
bool "Atlas7 timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables support for the Atlas7 timer.
|
|
|
|
config MXS_TIMER
|
|
bool "Mxs timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
select STMP_DEVICE
|
|
help
|
|
Enables support for the Mxs timer.
|
|
|
|
config PRIMA2_TIMER
|
|
bool "Prima2 timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables support for the Prima2 timer.
|
|
|
|
config U300_TIMER
|
|
bool "U300 timer driver" if COMPILE_TEST
|
|
depends on ARM
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables support for the U300 timer.
|
|
|
|
config NSPIRE_TIMER
|
|
bool "NSpire timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables support for the Nspire timer.
|
|
|
|
config KEYSTONE_TIMER
|
|
bool "Keystone timer driver" if COMPILE_TEST
|
|
depends on ARM || ARM64
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables support for the Keystone timer.
|
|
|
|
config INTEGRATOR_AP_TIMER
|
|
bool "Integrator-ap timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables support for the Integrator-ap timer.
|
|
|
|
config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
|
|
bool "Clocksource PRCMU Timer sched_clock"
|
|
depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK)
|
|
default y
|
|
help
|
|
Use the always on PRCMU Timer as sched_clock
|
|
|
|
config CLKSRC_EFM32
|
|
bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
|
|
depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
|
|
select CLKSRC_MMIO
|
|
default ARCH_EFM32
|
|
help
|
|
Support to use the timers of EFM32 SoCs as clock source and clock
|
|
event device.
|
|
|
|
config CLKSRC_LPC32XX
|
|
bool "Clocksource for LPC32XX" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
depends on ARM
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF
|
|
help
|
|
Support for the LPC32XX clocksource.
|
|
|
|
config CLKSRC_PISTACHIO
|
|
bool "Clocksource for Pistachio SoC" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select TIMER_OF
|
|
help
|
|
Enables the clocksource for the Pistachio SoC.
|
|
|
|
config CLKSRC_TI_32K
|
|
bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
|
|
depends on GENERIC_SCHED_CLOCK
|
|
select TIMER_OF if OF
|
|
help
|
|
This option enables support for Texas Instruments 32.768 Hz clocksource
|
|
available on many OMAP-like platforms.
|
|
|
|
config CLKSRC_NPS
|
|
bool "NPS400 clocksource driver" if COMPILE_TEST
|
|
depends on !PHYS_ADDR_T_64BIT
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF if OF
|
|
help
|
|
NPS400 clocksource support.
|
|
Got 64 bit counter with update rate up to 1000MHz.
|
|
This counter is accessed via couple of 32 bit memory mapped registers.
|
|
|
|
config CLKSRC_STM32
|
|
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
|
|
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF
|
|
|
|
config CLKSRC_MPS2
|
|
bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
|
|
depends on GENERIC_SCHED_CLOCK
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF
|
|
|
|
config ARC_TIMERS
|
|
bool "Support for 32-bit TIMERn counters in ARC Cores" if COMPILE_TEST
|
|
select TIMER_OF
|
|
help
|
|
These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
|
|
(ARC700 as well as ARC HS38).
|
|
TIMER0 serves as clockevent while TIMER1 provides clocksource
|
|
|
|
config ARC_TIMERS_64BIT
|
|
bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
|
|
depends on ARC_TIMERS
|
|
select TIMER_OF
|
|
help
|
|
This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP)
|
|
RTC is implemented inside the core, while GFRC sits outside the core in
|
|
ARConnect IP block. Driver automatically picks one of them for clocksource
|
|
as appropriate.
|
|
|
|
config ARM_ARCH_TIMER
|
|
bool
|
|
select TIMER_OF if OF
|
|
select TIMER_ACPI if ACPI
|
|
|
|
config ARM_ARCH_TIMER_EVTSTREAM
|
|
bool "Enable ARM architected timer event stream generation by default"
|
|
default y if ARM_ARCH_TIMER
|
|
depends on ARM_ARCH_TIMER
|
|
help
|
|
This option enables support by default for event stream generation
|
|
based on the ARM architected timer. It is used for waking up CPUs
|
|
executing the wfe instruction at a frequency represented as a
|
|
power-of-2 divisor of the clock rate. The behaviour can also be
|
|
overridden on the command line using the
|
|
clocksource.arm_arch_timer.evtstream parameter.
|
|
The main use of the event stream is wfe-based timeouts of userspace
|
|
locking implementations. It might also be useful for imposing timeout
|
|
on wfe to safeguard against any programming errors in case an expected
|
|
event is not generated.
|
|
This must be disabled for hardware validation purposes to detect any
|
|
hardware anomalies of missing events.
|
|
|
|
config ARM_ARCH_TIMER_OOL_WORKAROUND
|
|
bool
|
|
|
|
config FSL_ERRATUM_A008585
|
|
bool "Workaround for Freescale/NXP Erratum A-008585"
|
|
default y
|
|
depends on ARM_ARCH_TIMER && ARM64
|
|
select ARM_ARCH_TIMER_OOL_WORKAROUND
|
|
help
|
|
This option enables a workaround for Freescale/NXP Erratum
|
|
A-008585 ("ARM generic timer may contain an erroneous
|
|
value"). The workaround will only be active if the
|
|
fsl,erratum-a008585 property is found in the timer node.
|
|
|
|
config HISILICON_ERRATUM_161010101
|
|
bool "Workaround for Hisilicon Erratum 161010101"
|
|
default y
|
|
select ARM_ARCH_TIMER_OOL_WORKAROUND
|
|
depends on ARM_ARCH_TIMER && ARM64
|
|
help
|
|
This option enables a workaround for Hisilicon Erratum
|
|
161010101. The workaround will be active if the hisilicon,erratum-161010101
|
|
property is found in the timer node.
|
|
|
|
config ARM64_ERRATUM_858921
|
|
bool "Workaround for Cortex-A73 erratum 858921"
|
|
default y
|
|
select ARM_ARCH_TIMER_OOL_WORKAROUND
|
|
depends on ARM_ARCH_TIMER && ARM64
|
|
help
|
|
This option enables a workaround applicable to Cortex-A73
|
|
(all versions), whose counter may return incorrect values.
|
|
The workaround will be dynamically enabled when an affected
|
|
core is detected.
|
|
|
|
config ARM_GLOBAL_TIMER
|
|
bool "Support for the ARM global timer" if COMPILE_TEST
|
|
select TIMER_OF if OF
|
|
depends on ARM
|
|
help
|
|
This options enables support for the ARM global timer unit
|
|
|
|
config ARM_TIMER_SP804
|
|
bool "Support for Dual Timer SP804 module"
|
|
depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF if OF
|
|
|
|
config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
|
|
bool
|
|
depends on ARM_GLOBAL_TIMER
|
|
default y
|
|
help
|
|
Use ARM global timer clock source as sched_clock
|
|
|
|
config ARMV7M_SYSTICK
|
|
bool "Support for the ARMv7M system time" if COMPILE_TEST
|
|
select TIMER_OF if OF
|
|
select CLKSRC_MMIO
|
|
help
|
|
This options enables support for the ARMv7M system timer unit
|
|
|
|
config ATMEL_PIT
|
|
select TIMER_OF if OF
|
|
def_bool SOC_AT91SAM9 || SOC_SAMA5
|
|
|
|
config ATMEL_ST
|
|
bool "Atmel ST timer support" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select TIMER_OF
|
|
select MFD_SYSCON
|
|
help
|
|
Support for the Atmel ST timer.
|
|
|
|
config CLKSRC_EXYNOS_MCT
|
|
bool "Exynos multi core timer driver" if COMPILE_TEST
|
|
depends on ARM || ARM64
|
|
help
|
|
Support for Multi Core Timer controller on Exynos SoCs.
|
|
|
|
config CLKSRC_SAMSUNG_PWM
|
|
bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
This is a new clocksource driver for the PWM timer found in
|
|
Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
|
|
for all devicetree enabled platforms. This driver will be
|
|
needed only on systems that do not have the Exynos MCT available.
|
|
|
|
config FSL_FTM_TIMER
|
|
bool "Freescale FlexTimer Module driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select CLKSRC_MMIO
|
|
help
|
|
Support for Freescale FlexTimer Module (FTM) timer.
|
|
|
|
config VF_PIT_TIMER
|
|
bool
|
|
select CLKSRC_MMIO
|
|
help
|
|
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
|
|
|
|
config OXNAS_RPS_TIMER
|
|
bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
|
|
select TIMER_OF
|
|
select CLKSRC_MMIO
|
|
help
|
|
This enables support for the Oxford Semiconductor OXNAS RPS timers.
|
|
|
|
config SYS_SUPPORTS_SH_CMT
|
|
bool
|
|
|
|
config MTK_TIMER
|
|
bool "Mediatek timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select TIMER_OF
|
|
select CLKSRC_MMIO
|
|
help
|
|
Support for Mediatek timer driver.
|
|
|
|
config SPRD_TIMER
|
|
bool "Spreadtrum timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select TIMER_OF
|
|
help
|
|
Enables support for the Spreadtrum timer driver.
|
|
|
|
config SYS_SUPPORTS_SH_MTU2
|
|
bool
|
|
|
|
config SYS_SUPPORTS_SH_TMU
|
|
bool
|
|
|
|
config SYS_SUPPORTS_EM_STI
|
|
bool
|
|
|
|
config CLKSRC_JCORE_PIT
|
|
bool "J-Core PIT timer driver" if COMPILE_TEST
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select CLKSRC_MMIO
|
|
help
|
|
This enables build of clocksource and clockevent driver for
|
|
the integrated PIT in the J-Core synthesizable, open source SoC.
|
|
|
|
config SH_TIMER_CMT
|
|
bool "Renesas CMT timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
default SYS_SUPPORTS_SH_CMT
|
|
help
|
|
This enables build of a clocksource and clockevent driver for
|
|
the Compare Match Timer (CMT) hardware available in 16/32/48-bit
|
|
variants on a wide range of Mobile and Automotive SoCs from Renesas.
|
|
|
|
config SH_TIMER_MTU2
|
|
bool "Renesas MTU2 timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
default SYS_SUPPORTS_SH_MTU2
|
|
help
|
|
This enables build of a clockevent driver for the Multi-Function
|
|
Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
|
|
This hardware comes with 16 bit-timer registers.
|
|
|
|
config RENESAS_OSTM
|
|
bool "Renesas OSTM timer driver" if COMPILE_TEST
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enables the support for the Renesas OSTM.
|
|
|
|
config SH_TIMER_TMU
|
|
bool "Renesas TMU timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
default SYS_SUPPORTS_SH_TMU
|
|
help
|
|
This enables build of a clocksource and clockevent driver for
|
|
the 32-bit Timer Unit (TMU) hardware available on a wide range
|
|
SoCs from Renesas.
|
|
|
|
config EM_TIMER_STI
|
|
bool "Renesas STI timer driver" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
default SYS_SUPPORTS_EM_STI
|
|
help
|
|
This enables build of a clocksource and clockevent driver for
|
|
the 48-bit System Timer (STI) hardware available on a SoCs
|
|
such as EMEV2 from former NEC Electronics.
|
|
|
|
config CLKSRC_QCOM
|
|
bool "Qualcomm MSM timer" if COMPILE_TEST
|
|
depends on ARM
|
|
select TIMER_OF
|
|
help
|
|
This enables the clocksource and the per CPU clockevent driver for the
|
|
Qualcomm SoCs.
|
|
|
|
config CLKSRC_VERSATILE
|
|
bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
|
|
depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
|
|
select TIMER_OF
|
|
default y if MFD_VEXPRESS_SYSREG
|
|
help
|
|
This option enables clock source based on free running
|
|
counter available in the "System Registers" block of
|
|
ARM Versatile, RealView and Versatile Express reference
|
|
platforms.
|
|
|
|
config CLKSRC_MIPS_GIC
|
|
bool
|
|
depends on MIPS_GIC
|
|
select TIMER_OF
|
|
|
|
config CLKSRC_TANGO_XTAL
|
|
bool "Clocksource for Tango SoC" if COMPILE_TEST
|
|
depends on ARM
|
|
select TIMER_OF
|
|
select CLKSRC_MMIO
|
|
help
|
|
This enables the clocksource for Tango SoC
|
|
|
|
config CLKSRC_PXA
|
|
bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select CLKSRC_MMIO
|
|
help
|
|
This enables OST0 support available on PXA and SA-11x0
|
|
platforms.
|
|
|
|
config H8300_TMR8
|
|
bool "Clockevent timer for the H8300 platform" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
This enables the 8 bits timer for the H8300 platform.
|
|
|
|
config H8300_TMR16
|
|
bool "Clockevent timer for the H83069 platform" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
This enables the 16 bits timer for the H8300 platform with the
|
|
H83069 cpu.
|
|
|
|
config H8300_TPU
|
|
bool "Clocksource for the H8300 platform" if COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
This enables the clocksource for the H8300 platform with the
|
|
H8S2678 cpu.
|
|
|
|
config CLKSRC_IMX_GPT
|
|
bool "Clocksource using i.MX GPT" if COMPILE_TEST
|
|
depends on ARM && CLKDEV_LOOKUP
|
|
select CLKSRC_MMIO
|
|
|
|
config CLKSRC_IMX_TPM
|
|
bool "Clocksource using i.MX TPM" if COMPILE_TEST
|
|
depends on ARM && CLKDEV_LOOKUP
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enable this option to use IMX Timer/PWM Module (TPM) timer as
|
|
clocksource.
|
|
|
|
config CLKSRC_ST_LPC
|
|
bool "Low power clocksource found in the LPC" if COMPILE_TEST
|
|
select TIMER_OF if OF
|
|
depends on HAS_IOMEM
|
|
select CLKSRC_MMIO
|
|
help
|
|
Enable this option to use the Low Power controller timer
|
|
as clocksource.
|
|
|
|
config ATCPIT100_TIMER
|
|
bool "ATCPIT100 timer driver"
|
|
depends on NDS32 || COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
select TIMER_OF
|
|
default NDS32
|
|
help
|
|
This option enables support for the Andestech ATCPIT100 timers.
|
|
|
|
endmenu
|