linux/drivers/dma/idxd/irq.c
Dave Jiang 403a2e2365 dmaengine: idxd: change MSIX allocation based on per wq activation
Change the driver where WQ interrupt is requested only when wq is being
enabled. This new scheme set things up so that request_threaded_irq() is
only called when a kernel wq type is being enabled. This also sets up for
future interrupt request where different interrupt handler such as wq
occupancy interrupt can be setup instead of the wq completion interrupt.

Not calling request_irq() until the WQ actually needs an irq also prevents
wasting of CPU irq vectors on x86 systems, which is a limited resource.

idxd_flush_pending_descs() is moved to device.c since descriptor flushing
is now part of wq disable rather than shutdown().

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942149487.2412839.6691222855803875848.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-05 13:11:22 +05:30

505 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2019 Intel Corporation. All rights rsvd. */
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/dmaengine.h>
#include <linux/delay.h>
#include <uapi/linux/idxd.h>
#include "../dmaengine.h"
#include "idxd.h"
#include "registers.h"
enum irq_work_type {
IRQ_WORK_NORMAL = 0,
IRQ_WORK_PROCESS_FAULT,
};
struct idxd_fault {
struct work_struct work;
u64 addr;
struct idxd_device *idxd;
};
struct idxd_resubmit {
struct work_struct work;
struct idxd_desc *desc;
};
struct idxd_int_handle_revoke {
struct work_struct work;
struct idxd_device *idxd;
};
static void idxd_device_reinit(struct work_struct *work)
{
struct idxd_device *idxd = container_of(work, struct idxd_device, work);
struct device *dev = &idxd->pdev->dev;
int rc, i;
idxd_device_reset(idxd);
rc = idxd_device_config(idxd);
if (rc < 0)
goto out;
rc = idxd_device_enable(idxd);
if (rc < 0)
goto out;
for (i = 0; i < idxd->max_wqs; i++) {
struct idxd_wq *wq = idxd->wqs[i];
if (wq->state == IDXD_WQ_ENABLED) {
rc = idxd_wq_enable(wq);
if (rc < 0) {
dev_warn(dev, "Unable to re-enable wq %s\n",
dev_name(wq_confdev(wq)));
}
}
}
return;
out:
idxd_device_clear_state(idxd);
}
/*
* The function sends a drain descriptor for the interrupt handle. The drain ensures
* all descriptors with this interrupt handle is flushed and the interrupt
* will allow the cleanup of the outstanding descriptors.
*/
static void idxd_int_handle_revoke_drain(struct idxd_irq_entry *ie)
{
struct idxd_wq *wq = ie_to_wq(ie);
struct idxd_device *idxd = wq->idxd;
struct device *dev = &idxd->pdev->dev;
struct dsa_hw_desc desc = {};
void __iomem *portal;
int rc;
/* Issue a simple drain operation with interrupt but no completion record */
desc.flags = IDXD_OP_FLAG_RCI;
desc.opcode = DSA_OPCODE_DRAIN;
desc.priv = 1;
if (ie->pasid != INVALID_IOASID)
desc.pasid = ie->pasid;
desc.int_handle = ie->int_handle;
portal = idxd_wq_portal_addr(wq);
/*
* The wmb() makes sure that the descriptor is all there before we
* issue.
*/
wmb();
if (wq_dedicated(wq)) {
iosubmit_cmds512(portal, &desc, 1);
} else {
rc = idxd_enqcmds(wq, portal, &desc);
/* This should not fail unless hardware failed. */
if (rc < 0)
dev_warn(dev, "Failed to submit drain desc on wq %d\n", wq->id);
}
}
static void idxd_abort_invalid_int_handle_descs(struct idxd_irq_entry *ie)
{
LIST_HEAD(flist);
struct idxd_desc *d, *t;
struct llist_node *head;
spin_lock(&ie->list_lock);
head = llist_del_all(&ie->pending_llist);
if (head) {
llist_for_each_entry_safe(d, t, head, llnode)
list_add_tail(&d->list, &ie->work_list);
}
list_for_each_entry_safe(d, t, &ie->work_list, list) {
if (d->completion->status == DSA_COMP_INT_HANDLE_INVAL)
list_move_tail(&d->list, &flist);
}
spin_unlock(&ie->list_lock);
list_for_each_entry_safe(d, t, &flist, list) {
list_del(&d->list);
idxd_dma_complete_txd(d, IDXD_COMPLETE_ABORT, true);
}
}
static void idxd_int_handle_revoke(struct work_struct *work)
{
struct idxd_int_handle_revoke *revoke =
container_of(work, struct idxd_int_handle_revoke, work);
struct idxd_device *idxd = revoke->idxd;
struct pci_dev *pdev = idxd->pdev;
struct device *dev = &pdev->dev;
int i, new_handle, rc;
if (!idxd->request_int_handles) {
kfree(revoke);
dev_warn(dev, "Unexpected int handle refresh interrupt.\n");
return;
}
/*
* The loop attempts to acquire new interrupt handle for all interrupt
* vectors that supports a handle. If a new interrupt handle is acquired and the
* wq is kernel type, the driver will kill the percpu_ref to pause all
* ongoing descriptor submissions. The interrupt handle is then changed.
* After change, the percpu_ref is revived and all the pending submissions
* are woken to try again. A drain is sent to for the interrupt handle
* at the end to make sure all invalid int handle descriptors are processed.
*/
for (i = 1; i < idxd->irq_cnt; i++) {
struct idxd_irq_entry *ie = idxd_get_ie(idxd, i);
struct idxd_wq *wq = ie_to_wq(ie);
if (ie->int_handle == INVALID_INT_HANDLE)
continue;
rc = idxd_device_request_int_handle(idxd, i, &new_handle, IDXD_IRQ_MSIX);
if (rc < 0) {
dev_warn(dev, "get int handle %d failed: %d\n", i, rc);
/*
* Failed to acquire new interrupt handle. Kill the WQ
* and release all the pending submitters. The submitters will
* get error return code and handle appropriately.
*/
ie->int_handle = INVALID_INT_HANDLE;
idxd_wq_quiesce(wq);
idxd_abort_invalid_int_handle_descs(ie);
continue;
}
/* No change in interrupt handle, nothing needs to be done */
if (ie->int_handle == new_handle)
continue;
if (wq->state != IDXD_WQ_ENABLED || wq->type != IDXD_WQT_KERNEL) {
/*
* All the MSIX interrupts are allocated at once during probe.
* Therefore we need to update all interrupts even if the WQ
* isn't supporting interrupt operations.
*/
ie->int_handle = new_handle;
continue;
}
mutex_lock(&wq->wq_lock);
reinit_completion(&wq->wq_resurrect);
/* Kill percpu_ref to pause additional descriptor submissions */
percpu_ref_kill(&wq->wq_active);
/* Wait for all submitters quiesce before we change interrupt handle */
wait_for_completion(&wq->wq_dead);
ie->int_handle = new_handle;
/* Revive percpu ref and wake up all the waiting submitters */
percpu_ref_reinit(&wq->wq_active);
complete_all(&wq->wq_resurrect);
mutex_unlock(&wq->wq_lock);
/*
* The delay here is to wait for all possible MOVDIR64B that
* are issued before percpu_ref_kill() has happened to have
* reached the PCIe domain before the drain is issued. The driver
* needs to ensure that the drain descriptor issued does not pass
* all the other issued descriptors that contain the invalid
* interrupt handle in order to ensure that the drain descriptor
* interrupt will allow the cleanup of all the descriptors with
* invalid interrupt handle.
*/
if (wq_dedicated(wq))
udelay(100);
idxd_int_handle_revoke_drain(ie);
}
kfree(revoke);
}
static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
{
struct device *dev = &idxd->pdev->dev;
union gensts_reg gensts;
u32 val = 0;
int i;
bool err = false;
if (cause & IDXD_INTC_HALT_STATE)
goto halt;
if (cause & IDXD_INTC_ERR) {
spin_lock(&idxd->dev_lock);
for (i = 0; i < 4; i++)
idxd->sw_err.bits[i] = ioread64(idxd->reg_base +
IDXD_SWERR_OFFSET + i * sizeof(u64));
iowrite64(idxd->sw_err.bits[0] & IDXD_SWERR_ACK,
idxd->reg_base + IDXD_SWERR_OFFSET);
if (idxd->sw_err.valid && idxd->sw_err.wq_idx_valid) {
int id = idxd->sw_err.wq_idx;
struct idxd_wq *wq = idxd->wqs[id];
if (wq->type == IDXD_WQT_USER)
wake_up_interruptible(&wq->err_queue);
} else {
int i;
for (i = 0; i < idxd->max_wqs; i++) {
struct idxd_wq *wq = idxd->wqs[i];
if (wq->type == IDXD_WQT_USER)
wake_up_interruptible(&wq->err_queue);
}
}
spin_unlock(&idxd->dev_lock);
val |= IDXD_INTC_ERR;
for (i = 0; i < 4; i++)
dev_warn(dev, "err[%d]: %#16.16llx\n",
i, idxd->sw_err.bits[i]);
err = true;
}
if (cause & IDXD_INTC_INT_HANDLE_REVOKED) {
struct idxd_int_handle_revoke *revoke;
val |= IDXD_INTC_INT_HANDLE_REVOKED;
revoke = kzalloc(sizeof(*revoke), GFP_ATOMIC);
if (revoke) {
revoke->idxd = idxd;
INIT_WORK(&revoke->work, idxd_int_handle_revoke);
queue_work(idxd->wq, &revoke->work);
} else {
dev_err(dev, "Failed to allocate work for int handle revoke\n");
idxd_wqs_quiesce(idxd);
}
}
if (cause & IDXD_INTC_CMD) {
val |= IDXD_INTC_CMD;
complete(idxd->cmd_done);
}
if (cause & IDXD_INTC_OCCUPY) {
/* Driver does not utilize occupancy interrupt */
val |= IDXD_INTC_OCCUPY;
}
if (cause & IDXD_INTC_PERFMON_OVFL) {
val |= IDXD_INTC_PERFMON_OVFL;
perfmon_counter_overflow(idxd);
}
val ^= cause;
if (val)
dev_warn_once(dev, "Unexpected interrupt cause bits set: %#x\n",
val);
if (!err)
return 0;
halt:
gensts.bits = ioread32(idxd->reg_base + IDXD_GENSTATS_OFFSET);
if (gensts.state == IDXD_DEVICE_STATE_HALT) {
idxd->state = IDXD_DEV_HALTED;
if (gensts.reset_type == IDXD_DEVICE_RESET_SOFTWARE) {
/*
* If we need a software reset, we will throw the work
* on a system workqueue in order to allow interrupts
* for the device command completions.
*/
INIT_WORK(&idxd->work, idxd_device_reinit);
queue_work(idxd->wq, &idxd->work);
} else {
idxd->state = IDXD_DEV_HALTED;
idxd_wqs_quiesce(idxd);
idxd_wqs_unmap_portal(idxd);
spin_lock(&idxd->dev_lock);
idxd_device_clear_state(idxd);
dev_err(&idxd->pdev->dev,
"idxd halted, need %s.\n",
gensts.reset_type == IDXD_DEVICE_RESET_FLR ?
"FLR" : "system reset");
spin_unlock(&idxd->dev_lock);
return -ENXIO;
}
}
return 0;
}
irqreturn_t idxd_misc_thread(int vec, void *data)
{
struct idxd_irq_entry *irq_entry = data;
struct idxd_device *idxd = ie_to_idxd(irq_entry);
int rc;
u32 cause;
cause = ioread32(idxd->reg_base + IDXD_INTCAUSE_OFFSET);
if (cause)
iowrite32(cause, idxd->reg_base + IDXD_INTCAUSE_OFFSET);
while (cause) {
rc = process_misc_interrupts(idxd, cause);
if (rc < 0)
break;
cause = ioread32(idxd->reg_base + IDXD_INTCAUSE_OFFSET);
if (cause)
iowrite32(cause, idxd->reg_base + IDXD_INTCAUSE_OFFSET);
}
return IRQ_HANDLED;
}
static void idxd_int_handle_resubmit_work(struct work_struct *work)
{
struct idxd_resubmit *irw = container_of(work, struct idxd_resubmit, work);
struct idxd_desc *desc = irw->desc;
struct idxd_wq *wq = desc->wq;
int rc;
desc->completion->status = 0;
rc = idxd_submit_desc(wq, desc);
if (rc < 0) {
dev_dbg(&wq->idxd->pdev->dev, "Failed to resubmit desc %d to wq %d.\n",
desc->id, wq->id);
/*
* If the error is not -EAGAIN, it means the submission failed due to wq
* has been killed instead of ENQCMDS failure. Here the driver needs to
* notify the submitter of the failure by reporting abort status.
*
* -EAGAIN comes from ENQCMDS failure. idxd_submit_desc() will handle the
* abort.
*/
if (rc != -EAGAIN) {
desc->completion->status = IDXD_COMP_DESC_ABORT;
idxd_dma_complete_txd(desc, IDXD_COMPLETE_ABORT, false);
}
idxd_free_desc(wq, desc);
}
kfree(irw);
}
bool idxd_queue_int_handle_resubmit(struct idxd_desc *desc)
{
struct idxd_wq *wq = desc->wq;
struct idxd_device *idxd = wq->idxd;
struct idxd_resubmit *irw;
irw = kzalloc(sizeof(*irw), GFP_KERNEL);
if (!irw)
return false;
irw->desc = desc;
INIT_WORK(&irw->work, idxd_int_handle_resubmit_work);
queue_work(idxd->wq, &irw->work);
return true;
}
static void irq_process_pending_llist(struct idxd_irq_entry *irq_entry)
{
struct idxd_desc *desc, *t;
struct llist_node *head;
head = llist_del_all(&irq_entry->pending_llist);
if (!head)
return;
llist_for_each_entry_safe(desc, t, head, llnode) {
u8 status = desc->completion->status & DSA_COMP_STATUS_MASK;
if (status) {
/*
* Check against the original status as ABORT is software defined
* and 0xff, which DSA_COMP_STATUS_MASK can mask out.
*/
if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) {
idxd_dma_complete_txd(desc, IDXD_COMPLETE_ABORT, true);
continue;
}
idxd_dma_complete_txd(desc, IDXD_COMPLETE_NORMAL, true);
} else {
spin_lock(&irq_entry->list_lock);
list_add_tail(&desc->list,
&irq_entry->work_list);
spin_unlock(&irq_entry->list_lock);
}
}
}
static void irq_process_work_list(struct idxd_irq_entry *irq_entry)
{
LIST_HEAD(flist);
struct idxd_desc *desc, *n;
/*
* This lock protects list corruption from access of list outside of the irq handler
* thread.
*/
spin_lock(&irq_entry->list_lock);
if (list_empty(&irq_entry->work_list)) {
spin_unlock(&irq_entry->list_lock);
return;
}
list_for_each_entry_safe(desc, n, &irq_entry->work_list, list) {
if (desc->completion->status) {
list_move_tail(&desc->list, &flist);
}
}
spin_unlock(&irq_entry->list_lock);
list_for_each_entry(desc, &flist, list) {
/*
* Check against the original status as ABORT is software defined
* and 0xff, which DSA_COMP_STATUS_MASK can mask out.
*/
if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) {
idxd_dma_complete_txd(desc, IDXD_COMPLETE_ABORT, true);
continue;
}
idxd_dma_complete_txd(desc, IDXD_COMPLETE_NORMAL, true);
}
}
irqreturn_t idxd_wq_thread(int irq, void *data)
{
struct idxd_irq_entry *irq_entry = data;
/*
* There are two lists we are processing. The pending_llist is where
* submmiter adds all the submitted descriptor after sending it to
* the workqueue. It's a lockless singly linked list. The work_list
* is the common linux double linked list. We are in a scenario of
* multiple producers and a single consumer. The producers are all
* the kernel submitters of descriptors, and the consumer is the
* kernel irq handler thread for the msix vector when using threaded
* irq. To work with the restrictions of llist to remain lockless,
* we are doing the following steps:
* 1. Iterate through the work_list and process any completed
* descriptor. Delete the completed entries during iteration.
* 2. llist_del_all() from the pending list.
* 3. Iterate through the llist that was deleted from the pending list
* and process the completed entries.
* 4. If the entry is still waiting on hardware, list_add_tail() to
* the work_list.
*/
irq_process_work_list(irq_entry);
irq_process_pending_llist(irq_entry);
return IRQ_HANDLED;
}