linux/drivers/net/wireless/wl12xx/conf.h
Luciano Coelho 3a9d60e5bd wl12xx: add configuration values for scheduled scan
Add the structures and values for driver-configured scheduled scan
parameters.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13 00:06:32 +03:00

1267 lines
26 KiB
C

/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __CONF_H__
#define __CONF_H__
enum {
CONF_HW_BIT_RATE_1MBPS = BIT(0),
CONF_HW_BIT_RATE_2MBPS = BIT(1),
CONF_HW_BIT_RATE_5_5MBPS = BIT(2),
CONF_HW_BIT_RATE_6MBPS = BIT(3),
CONF_HW_BIT_RATE_9MBPS = BIT(4),
CONF_HW_BIT_RATE_11MBPS = BIT(5),
CONF_HW_BIT_RATE_12MBPS = BIT(6),
CONF_HW_BIT_RATE_18MBPS = BIT(7),
CONF_HW_BIT_RATE_22MBPS = BIT(8),
CONF_HW_BIT_RATE_24MBPS = BIT(9),
CONF_HW_BIT_RATE_36MBPS = BIT(10),
CONF_HW_BIT_RATE_48MBPS = BIT(11),
CONF_HW_BIT_RATE_54MBPS = BIT(12),
CONF_HW_BIT_RATE_MCS_0 = BIT(13),
CONF_HW_BIT_RATE_MCS_1 = BIT(14),
CONF_HW_BIT_RATE_MCS_2 = BIT(15),
CONF_HW_BIT_RATE_MCS_3 = BIT(16),
CONF_HW_BIT_RATE_MCS_4 = BIT(17),
CONF_HW_BIT_RATE_MCS_5 = BIT(18),
CONF_HW_BIT_RATE_MCS_6 = BIT(19),
CONF_HW_BIT_RATE_MCS_7 = BIT(20)
};
enum {
CONF_HW_RATE_INDEX_1MBPS = 0,
CONF_HW_RATE_INDEX_2MBPS = 1,
CONF_HW_RATE_INDEX_5_5MBPS = 2,
CONF_HW_RATE_INDEX_6MBPS = 3,
CONF_HW_RATE_INDEX_9MBPS = 4,
CONF_HW_RATE_INDEX_11MBPS = 5,
CONF_HW_RATE_INDEX_12MBPS = 6,
CONF_HW_RATE_INDEX_18MBPS = 7,
CONF_HW_RATE_INDEX_22MBPS = 8,
CONF_HW_RATE_INDEX_24MBPS = 9,
CONF_HW_RATE_INDEX_36MBPS = 10,
CONF_HW_RATE_INDEX_48MBPS = 11,
CONF_HW_RATE_INDEX_54MBPS = 12,
CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS,
};
enum {
CONF_HW_RXTX_RATE_MCS7 = 0,
CONF_HW_RXTX_RATE_MCS6,
CONF_HW_RXTX_RATE_MCS5,
CONF_HW_RXTX_RATE_MCS4,
CONF_HW_RXTX_RATE_MCS3,
CONF_HW_RXTX_RATE_MCS2,
CONF_HW_RXTX_RATE_MCS1,
CONF_HW_RXTX_RATE_MCS0,
CONF_HW_RXTX_RATE_54,
CONF_HW_RXTX_RATE_48,
CONF_HW_RXTX_RATE_36,
CONF_HW_RXTX_RATE_24,
CONF_HW_RXTX_RATE_22,
CONF_HW_RXTX_RATE_18,
CONF_HW_RXTX_RATE_12,
CONF_HW_RXTX_RATE_11,
CONF_HW_RXTX_RATE_9,
CONF_HW_RXTX_RATE_6,
CONF_HW_RXTX_RATE_5_5,
CONF_HW_RXTX_RATE_2,
CONF_HW_RXTX_RATE_1,
CONF_HW_RXTX_RATE_MAX,
CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff
};
enum {
CONF_SG_DISABLE = 0,
CONF_SG_PROTECTIVE,
CONF_SG_OPPORTUNISTIC
};
enum {
/*
* PER threshold in PPM of the BT voice
*
* Range: 0 - 10000000
*/
CONF_SG_BT_PER_THRESHOLD = 0,
/*
* Number of consequent RX_ACTIVE activities to override BT voice
* frames to ensure WLAN connection
*
* Range: 0 - 100
*/
CONF_SG_HV3_MAX_OVERRIDE,
/*
* Defines the PER threshold of the BT voice
*
* Range: 0 - 65000
*/
CONF_SG_BT_NFS_SAMPLE_INTERVAL,
/*
* Defines the load ratio of BT
*
* Range: 0 - 100 (%)
*/
CONF_SG_BT_LOAD_RATIO,
/*
* Defines whether the SG will force WLAN host to enter/exit PSM
*
* Range: 1 - SG can force, 0 - host handles PSM
*/
CONF_SG_AUTO_PS_MODE,
/*
* Compensation percentage of probe requests when scan initiated
* during BT voice/ACL link.
*
* Range: 0 - 255 (%)
*/
CONF_SG_AUTO_SCAN_PROBE_REQ,
/*
* Compensation percentage of probe requests when active scan initiated
* during BT voice
*
* Range: 0 - 255 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
/*
* Defines antenna configuration (single/dual antenna)
*
* Range: 0 - single antenna, 1 - dual antenna
*/
CONF_SG_ANTENNA_CONFIGURATION,
/*
* The threshold (percent) of max consequtive beacon misses before
* increasing priority of beacon reception.
*
* Range: 0 - 100 (%)
*/
CONF_SG_BEACON_MISS_PERCENT,
/*
* The rate threshold below which receiving a data frame from the AP
* will increase the priority of the data frame above BT traffic.
*
* Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
*/
CONF_SG_RATE_ADAPT_THRESH,
/*
* Not used currently.
*
* Range: 0
*/
CONF_SG_RATE_ADAPT_SNR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT master basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT master basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT slave basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT slave basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
/*
* RX guard time before the beginning of a new BT voice frame during
* which no new WLAN trigger frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
CONF_SG_RXT,
/*
* TX guard time before the beginning of a new BT voice frame during
* which no new WLAN frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
CONF_SG_TXT,
/*
* Enable adaptive RXT/TXT algorithm. If disabled, the host values
* will be utilized.
*
* Range: 0 - disable, 1 - enable
*/
CONF_SG_ADAPTIVE_RXT_TXT,
/*
* The used WLAN legacy service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_PS_POLL_TIMEOUT,
/*
* The used WLAN UPSD service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_UPSD_TIMEOUT,
/*
* Configure the min and max time BT gains the antenna
* in WLAN Active / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
/*
* The maximum time WLAN can gain the antenna for
* in WLAN Active / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN Active / BT slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
/*
* The maximum time WLAN can gain the antenna for
* in WLAN Active / BT slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN Active / BT basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
/*
* The maximum time WLAN can gain the antenna for
* in WLAN Active / BT basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT voice
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
/*
* Fixed time ensured for BT traffic to gain the antenna during WLAN
* passive scan.
*
* Range: 0 - 1000 ms
*/
CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
/*
* Fixed time ensured for WLAN traffic to gain the antenna during WLAN
* passive scan.
*
* Range: 0 - 1000 ms
*/
CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
/*
* Number of consequent BT voice frames not interrupted by WLAN
*
* Range: 0 - 100
*/
CONF_SG_HV3_MAX_SERVED,
/*
* Protection time of the DHCP procedure.
*
* Range: 0 - 100000 (ms)
*/
CONF_SG_DHCP_TIME,
/*
* Compensation percentage of WLAN active scan window if initiated
* during BT A2DP
*
* Range: 0 - 1000 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
CONF_SG_TEMP_PARAM_1,
CONF_SG_TEMP_PARAM_2,
CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
/*
* AP beacon miss
*
* Range: 0 - 255
*/
CONF_SG_AP_BEACON_MISS_TX,
/*
* AP RX window length
*
* Range: 0 - 50
*/
CONF_SG_RX_WINDOW_LENGTH,
/*
* AP connection protection time
*
* Range: 0 - 5000
*/
CONF_SG_AP_CONNECTION_PROTECTION_TIME,
CONF_SG_TEMP_PARAM_6,
CONF_SG_TEMP_PARAM_7,
CONF_SG_TEMP_PARAM_8,
CONF_SG_TEMP_PARAM_9,
CONF_SG_TEMP_PARAM_10,
CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
CONF_SG_PARAMS_ALL = 0xff
};
struct conf_sg_settings {
u32 sta_params[CONF_SG_STA_PARAMS_MAX];
u32 ap_params[CONF_SG_AP_PARAMS_MAX];
u8 state;
};
enum conf_rx_queue_type {
CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */
CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
};
struct conf_rx_settings {
/*
* The maximum amount of time, in TU, before the
* firmware discards the MSDU.
*
* Range: 0 - 0xFFFFFFFF
*/
u32 rx_msdu_life_time;
/*
* Packet detection threshold in the PHY.
*
* FIXME: details unknown.
*/
u32 packet_detection_threshold;
/*
* The longest time the STA will wait to receive traffic from the AP
* after a PS-poll has been transmitted.
*
* Range: 0 - 200000
*/
u16 ps_poll_timeout;
/*
* The longest time the STA will wait to receive traffic from the AP
* after a frame has been sent from an UPSD enabled queue.
*
* Range: 0 - 200000
*/
u16 upsd_timeout;
/*
* The number of octets in an MPDU, below which an RTS/CTS
* handshake is not performed.
*
* Range: 0 - 4096
*/
u16 rts_threshold;
/*
* The RX Clear Channel Assessment threshold in the PHY
* (the energy threshold).
*
* Range: ENABLE_ENERGY_D == 0x140A
* DISABLE_ENERGY_D == 0xFFEF
*/
u16 rx_cca_threshold;
/*
* Occupied Rx mem-blocks number which requires interrupting the host
* (0 = no buffering, 0xffff = disabled).
*
* Range: u16
*/
u16 irq_blk_threshold;
/*
* Rx packets number which requires interrupting the host
* (0 = no buffering).
*
* Range: u16
*/
u16 irq_pkt_threshold;
/*
* Max time in msec the FW may delay RX-Complete interrupt.
*
* Range: 1 - 100
*/
u16 irq_timeout;
/*
* The RX queue type.
*
* Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY,
*/
u8 queue_type;
};
#define CONF_TX_MAX_RATE_CLASSES 8
#define CONF_TX_RATE_MASK_UNSPECIFIED 0
#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS)
#define CONF_TX_RATE_RETRY_LIMIT 10
/*
* Rates supported for data packets when operating as AP. Note the absense
* of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop
* one. The rate dropped is not mandatory under any operating mode.
*/
#define CONF_TX_AP_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \
CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \
CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
CONF_HW_BIT_RATE_54MBPS)
#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \
CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
CONF_HW_BIT_RATE_54MBPS)
/*
* Default rates for management traffic when operating in AP mode. This
* should be configured according to the basic rate set of the AP
*/
#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
/*
* Default rates for working as IBSS. use 11b rates
*/
#define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
CONF_HW_BIT_RATE_11MBPS);
struct conf_tx_rate_class {
/*
* The rates enabled for this rate class.
*
* Range: CONF_HW_BIT_RATE_* bit mask
*/
u32 enabled_rates;
/*
* The dot11 short retry limit used for TX retries.
*
* Range: u8
*/
u8 short_retry_limit;
/*
* The dot11 long retry limit used for TX retries.
*
* Range: u8
*/
u8 long_retry_limit;
/*
* Flags controlling the attributes of TX transmission.
*
* Range: bit 0: Truncate - when set, FW attempts to send a frame stop
* when the total valid per-rate attempts have
* been exhausted; otherwise transmissions
* will continue at the lowest available rate
* until the appropriate one of the
* short_retry_limit, long_retry_limit,
* dot11_max_transmit_msdu_life_time, or
* max_tx_life_time, is exhausted.
* 1: Preamble Override - indicates if the preamble type
* should be used in TX.
* 2: Preamble Type - the type of the preamble to be used by
* the policy (0 - long preamble, 1 - short preamble.
*/
u8 aflags;
};
#define CONF_TX_MAX_AC_COUNT 4
/* Slot number setting to start transmission at PIFS interval */
#define CONF_TX_AIFS_PIFS 1
/* Slot number setting to start transmission at DIFS interval normal
* DCF access */
#define CONF_TX_AIFS_DIFS 2
enum conf_tx_ac {
CONF_TX_AC_BE = 0, /* best effort / legacy */
CONF_TX_AC_BK = 1, /* background */
CONF_TX_AC_VI = 2, /* video */
CONF_TX_AC_VO = 3, /* voice */
CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */
CONF_TX_AC_ANY_TID = 0x1f
};
struct conf_tx_ac_category {
/*
* The AC class identifier.
*
* Range: enum conf_tx_ac
*/
u8 ac;
/*
* The contention window minimum size (in slots) for the access
* class.
*
* Range: u8
*/
u8 cw_min;
/*
* The contention window maximum size (in slots) for the access
* class.
*
* Range: u8
*/
u16 cw_max;
/*
* The AIF value (in slots) for the access class.
*
* Range: u8
*/
u8 aifsn;
/*
* The TX Op Limit (in microseconds) for the access class.
*
* Range: u16
*/
u16 tx_op_limit;
};
#define CONF_TX_MAX_TID_COUNT 8
enum {
CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/
CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/
CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/
};
enum {
CONF_PS_SCHEME_LEGACY = 0,
CONF_PS_SCHEME_UPSD_TRIGGER = 1,
CONF_PS_SCHEME_LEGACY_PSPOLL = 2,
CONF_PS_SCHEME_SAPSD = 3,
};
enum {
CONF_ACK_POLICY_LEGACY = 0,
CONF_ACK_POLICY_NO_ACK = 1,
CONF_ACK_POLICY_BLOCK = 2,
};
struct conf_tx_tid {
u8 queue_id;
u8 channel_type;
u8 tsid;
u8 ps_scheme;
u8 ack_policy;
u32 apsd_conf[2];
};
struct conf_tx_settings {
/*
* The TX ED value for TELEC Enable/Disable.
*
* Range: 0, 1
*/
u8 tx_energy_detection;
/*
* Configuration for rate classes for TX (currently only one
* rate class supported). Used in non-AP mode.
*/
struct conf_tx_rate_class sta_rc_conf;
/*
* Configuration for access categories for TX rate control.
*/
u8 ac_conf_count;
struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
/*
* AP-mode - allow this number of TX retries to a station before an
* event is triggered from FW.
*/
u16 ap_max_tx_retries;
/*
* Configuration for TID parameters.
*/
u8 tid_conf_count;
struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT];
/*
* The TX fragmentation threshold.
*
* Range: u16
*/
u16 frag_threshold;
/*
* Max time in msec the FW may delay frame TX-Complete interrupt.
*
* Range: u16
*/
u16 tx_compl_timeout;
/*
* Completed TX packet count which requires to issue the TX-Complete
* interrupt.
*
* Range: u16
*/
u16 tx_compl_threshold;
/*
* The rate used for control messages and scanning on the 2.4GHz band
*
* Range: CONF_HW_BIT_RATE_* bit mask
*/
u32 basic_rate;
/*
* The rate used for control messages and scanning on the 5GHz band
*
* Range: CONF_HW_BIT_RATE_* bit mask
*/
u32 basic_rate_5;
/*
* TX retry limits for templates
*/
u8 tmpl_short_retry_limit;
u8 tmpl_long_retry_limit;
};
enum {
CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/
CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/
CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */
CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */
CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F
};
#define CONF_MAX_BCN_FILT_IE_COUNT 32
#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0)
#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1)
#define CONF_BCN_IE_OUI_LEN 3
#define CONF_BCN_IE_VER_LEN 2
struct conf_bcn_filt_rule {
/*
* IE number to which to associate a rule.
*
* Range: u8
*/
u8 ie;
/*
* Rule to associate with the specific ie.
*
* Range: CONF_BCN_RULE_PASS_ON_*
*/
u8 rule;
/*
* OUI for the vendor specifie IE (221)
*/
u8 oui[CONF_BCN_IE_OUI_LEN];
/*
* Type for the vendor specifie IE (221)
*/
u8 type;
/*
* Version for the vendor specifie IE (221)
*/
u8 version[CONF_BCN_IE_VER_LEN];
};
#define CONF_MAX_RSSI_SNR_TRIGGERS 8
enum {
CONF_TRIG_METRIC_RSSI_BEACON = 0,
CONF_TRIG_METRIC_RSSI_DATA,
CONF_TRIG_METRIC_SNR_BEACON,
CONF_TRIG_METRIC_SNR_DATA
};
enum {
CONF_TRIG_EVENT_TYPE_LEVEL = 0,
CONF_TRIG_EVENT_TYPE_EDGE
};
enum {
CONF_TRIG_EVENT_DIR_LOW = 0,
CONF_TRIG_EVENT_DIR_HIGH,
CONF_TRIG_EVENT_DIR_BIDIR
};
struct conf_sig_weights {
/*
* RSSI from beacons average weight.
*
* Range: u8
*/
u8 rssi_bcn_avg_weight;
/*
* RSSI from data average weight.
*
* Range: u8
*/
u8 rssi_pkt_avg_weight;
/*
* SNR from beacons average weight.
*
* Range: u8
*/
u8 snr_bcn_avg_weight;
/*
* SNR from data average weight.
*
* Range: u8
*/
u8 snr_pkt_avg_weight;
};
enum conf_bcn_filt_mode {
CONF_BCN_FILT_MODE_DISABLED = 0,
CONF_BCN_FILT_MODE_ENABLED = 1
};
enum conf_bet_mode {
CONF_BET_MODE_DISABLE = 0,
CONF_BET_MODE_ENABLE = 1,
};
struct conf_conn_settings {
/*
* Firmware wakeup conditions configuration. The host may set only
* one bit.
*
* Range: CONF_WAKE_UP_EVENT_*
*/
u8 wake_up_event;
/*
* Listen interval for beacons or Dtims.
*
* Range: 0 for beacon and Dtim wakeup
* 1-10 for x Dtims
* 1-255 for x beacons
*/
u8 listen_interval;
/*
* Enable or disable the beacon filtering.
*
* Range: CONF_BCN_FILT_MODE_*
*/
enum conf_bcn_filt_mode bcn_filt_mode;
/*
* Configure Beacon filter pass-thru rules.
*/
u8 bcn_filt_ie_count;
struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
/*
* The number of consequtive beacons to lose, before the firmware
* becomes out of synch.
*
* Range: u32
*/
u32 synch_fail_thold;
/*
* After out-of-synch, the number of TU's to wait without a further
* received beacon (or probe response) before issuing the BSS_EVENT_LOSE
* event.
*
* Range: u32
*/
u32 bss_lose_timeout;
/*
* Beacon receive timeout.
*
* Range: u32
*/
u32 beacon_rx_timeout;
/*
* Broadcast receive timeout.
*
* Range: u32
*/
u32 broadcast_timeout;
/*
* Enable/disable reception of broadcast packets in power save mode
*
* Range: 1 - enable, 0 - disable
*/
u8 rx_broadcast_in_ps;
/*
* Consequtive PS Poll failures before sending event to driver
*
* Range: u8
*/
u8 ps_poll_threshold;
/*
* PS Poll failure recovery ACTIVE period length
*
* Range: u32 (ms)
*/
u32 ps_poll_recovery_period;
/*
* Configuration of signal average weights.
*/
struct conf_sig_weights sig_weights;
/*
* Specifies if beacon early termination procedure is enabled or
* disabled.
*
* Range: CONF_BET_MODE_*
*/
u8 bet_enable;
/*
* Specifies the maximum number of consecutive beacons that may be
* early terminated. After this number is reached at least one full
* beacon must be correctly received in FW before beacon ET
* resumes.
*
* Range 0 - 255
*/
u8 bet_max_consecutive;
/*
* Specifies the maximum number of times to try PSM entry if it fails
* (if sending the appropriate null-func message fails.)
*
* Range 0 - 255
*/
u8 psm_entry_retries;
/*
* Specifies the maximum number of times to try PSM exit if it fails
* (if sending the appropriate null-func message fails.)
*
* Range 0 - 255
*/
u8 psm_exit_retries;
/*
* Specifies the maximum number of times to try transmit the PSM entry
* null-func frame for each PSM entry attempt
*
* Range 0 - 255
*/
u8 psm_entry_nullfunc_retries;
/*
* Specifies the time to linger in active mode after successfully
* transmitting the PSM entry null-func frame.
*
* Range 0 - 255 TU's
*/
u8 psm_entry_hangover_period;
/*
*
* Specifies the interval of the connection keep-alive null-func
* frame in ms.
*
* Range: 1000 - 3600000
*/
u32 keep_alive_interval;
/*
* Maximum listen interval supported by the driver in units of beacons.
*
* Range: u16
*/
u8 max_listen_interval;
};
enum {
CONF_REF_CLK_19_2_E,
CONF_REF_CLK_26_E,
CONF_REF_CLK_38_4_E,
CONF_REF_CLK_52_E,
CONF_REF_CLK_38_4_M_XTAL,
CONF_REF_CLK_26_M_XTAL,
};
enum single_dual_band_enum {
CONF_SINGLE_BAND,
CONF_DUAL_BAND
};
#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
#define CONF_NUMBER_OF_SUB_BANDS_5 7
#define CONF_NUMBER_OF_RATE_GROUPS 6
#define CONF_NUMBER_OF_CHANNELS_2_4 14
#define CONF_NUMBER_OF_CHANNELS_5 35
struct conf_itrim_settings {
/* enable dco itrim */
u8 enable;
/* moderation timeout in microsecs from the last TX */
u32 timeout;
};
struct conf_pm_config_settings {
/*
* Host clock settling time
*
* Range: 0 - 30000 us
*/
u32 host_clk_settling_time;
/*
* Host fast wakeup support
*
* Range: true, false
*/
bool host_fast_wakeup_support;
};
struct conf_roam_trigger_settings {
/*
* The minimum interval between two trigger events.
*
* Range: 0 - 60000 ms
*/
u16 trigger_pacing;
/*
* The weight for rssi/beacon average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_rssi_beacon;
/*
* The weight for rssi/data frame average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_rssi_data;
/*
* The weight for snr/beacon average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_snr_beacon;
/*
* The weight for snr/data frame average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_snr_data;
};
struct conf_scan_settings {
/*
* The minimum time to wait on each channel for active scans
*
* Range: u32 tu/1000
*/
u32 min_dwell_time_active;
/*
* The maximum time to wait on each channel for active scans
*
* Range: u32 tu/1000
*/
u32 max_dwell_time_active;
/*
* The minimum time to wait on each channel for passive scans
*
* Range: u32 tu/1000
*/
u32 min_dwell_time_passive;
/*
* The maximum time to wait on each channel for passive scans
*
* Range: u32 tu/1000
*/
u32 max_dwell_time_passive;
/*
* Number of probe requests to transmit on each active scan channel
*
* Range: u8
*/
u16 num_probe_reqs;
};
struct conf_sched_scan_settings {
/* minimum time to wait on the channel for active scans (in TUs) */
u16 min_dwell_time_active;
/* maximum time to wait on the channel for active scans (in TUs) */
u16 max_dwell_time_active;
/* time to wait on the channel for passive scans (in TUs) */
u32 dwell_time_passive;
/* number of probe requests to send on each channel in active scans */
u8 num_probe_reqs;
/* RSSI threshold to be used for filtering */
s8 rssi_threshold;
/* SNR threshold to be used for filtering */
s8 snr_threshold;
};
/* these are number of channels on the band divided by two, rounded up */
#define CONF_TX_PWR_COMPENSATION_LEN_2 7
#define CONF_TX_PWR_COMPENSATION_LEN_5 18
struct conf_rf_settings {
/*
* Per channel power compensation for 2.4GHz
*
* Range: s8
*/
u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
/*
* Per channel power compensation for 5GHz
*
* Range: s8
*/
u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
};
struct conf_ht_setting {
u16 tx_ba_win_size;
u16 inactivity_timeout;
};
struct conf_memory_settings {
/* Number of stations supported in IBSS mode */
u8 num_stations;
/* Number of ssid profiles used in IBSS mode */
u8 ssid_profiles;
/* Number of memory buffers allocated to rx pool */
u8 rx_block_num;
/* Minimum number of blocks allocated to tx pool */
u8 tx_min_block_num;
/* Disable/Enable dynamic memory */
u8 dynamic_memory;
/*
* Minimum required free tx memory blocks in order to assure optimum
* performence
*
* Range: 0-120
*/
u8 min_req_tx_blocks;
/*
* Minimum required free rx memory blocks in order to assure optimum
* performence
*
* Range: 0-120
*/
u8 min_req_rx_blocks;
/*
* Minimum number of mem blocks (free+used) guaranteed for TX
*
* Range: 0-120
*/
u8 tx_min;
};
struct conf_fm_coex {
u8 enable;
u8 swallow_period;
u8 n_divider_fref_set_1;
u8 n_divider_fref_set_2;
u16 m_divider_fref_set_1;
u16 m_divider_fref_set_2;
u32 coex_pll_stabilization_time;
u16 ldo_stabilization_time;
u8 fm_disturbed_band_margin;
u8 swallow_clk_diff;
};
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_tx_settings tx;
struct conf_conn_settings conn;
struct conf_itrim_settings itrim;
struct conf_pm_config_settings pm_config;
struct conf_roam_trigger_settings roam_trigger;
struct conf_scan_settings scan;
struct conf_sched_scan_settings sched_scan;
struct conf_rf_settings rf;
struct conf_ht_setting ht;
struct conf_memory_settings mem_wl127x;
struct conf_memory_settings mem_wl128x;
struct conf_fm_coex fm_coex;
u8 hci_io_ds;
};
#endif