leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f2ea55775e
linux/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
Laurent Pinchart 83910ad3f5 drm/omap: Move most omap_dss_driver operations to omap_dss_device_ops 
omap_dss_device instances have two ops structures, omap_dss_driver and
omap_dss_device_ops. The former is used for devices at the end of the
pipeline (a.k.a. display devices), and the latter for intermediate
devices.

Having two sets of operations isn't convenient as code that iterates
over omap_dss_device instances need to take them both into account.
There's currently a reasonably small amount of such code, but more will
be introduced to move the driver away from recursive operations. To
simplify current and future code, move all operations that are not
specific to the display device to the omap_dss_device_ops.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-09-03 16:13:29 +03:00

434 lines
11 KiB
C
Raw Blame History

/*
* Toppoly TD028TTEC1 panel support
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* Neo 1973 code (jbt6k74.c):
* Copyright (C) 2006-2007 by OpenMoko, Inc.
* Author: Harald Welte <laforge@openmoko.org>
*
* Ported and adapted from Neo 1973 U-Boot by:
* H. Nikolaus Schaller <hns@goldelico.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct videomode vm;
struct spi_device *spi_dev;
};
static const struct videomode td028ttec1_panel_vm = {
.hactive = 480,
.vactive = 640,
.pixelclock = 22153000,
.hfront_porch = 24,
.hsync_len = 8,
.hback_porch = 8,
.vfront_porch = 4,
.vsync_len = 2,
.vback_porch = 2,
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_SYNC_POSEDGE |
DISPLAY_FLAGS_PIXDATA_NEGEDGE,
/*
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
};
#define JBT_COMMAND 0x000
#define JBT_DATA 0x100
static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
{
int rc;
u16 tx_buf = JBT_COMMAND | reg;
rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
1*sizeof(u16));
if (rc != 0)
dev_err(&ddata->spi_dev->dev,
"jbt_ret_write_0 spi_write ret %d\n", rc);
return rc;
}
static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
{
int rc;
u16 tx_buf[2];
tx_buf[0] = JBT_COMMAND | reg;
tx_buf[1] = JBT_DATA | data;
rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
2*sizeof(u16));
if (rc != 0)
dev_err(&ddata->spi_dev->dev,
"jbt_reg_write_1 spi_write ret %d\n", rc);
return rc;
}
static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
{
int rc;
u16 tx_buf[3];
tx_buf[0] = JBT_COMMAND | reg;
tx_buf[1] = JBT_DATA | (data >> 8);
tx_buf[2] = JBT_DATA | (data & 0xff);
rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
3*sizeof(u16));
if (rc != 0)
dev_err(&ddata->spi_dev->dev,
"jbt_reg_write_2 spi_write ret %d\n", rc);
return rc;
}
enum jbt_register {
JBT_REG_SLEEP_IN = 0x10,
JBT_REG_SLEEP_OUT = 0x11,
JBT_REG_DISPLAY_OFF = 0x28,
JBT_REG_DISPLAY_ON = 0x29,
JBT_REG_RGB_FORMAT = 0x3a,
JBT_REG_QUAD_RATE = 0x3b,
JBT_REG_POWER_ON_OFF = 0xb0,
JBT_REG_BOOSTER_OP = 0xb1,
JBT_REG_BOOSTER_MODE = 0xb2,
JBT_REG_BOOSTER_FREQ = 0xb3,
JBT_REG_OPAMP_SYSCLK = 0xb4,
JBT_REG_VSC_VOLTAGE = 0xb5,
JBT_REG_VCOM_VOLTAGE = 0xb6,
JBT_REG_EXT_DISPL = 0xb7,
JBT_REG_OUTPUT_CONTROL = 0xb8,
JBT_REG_DCCLK_DCEV = 0xb9,
JBT_REG_DISPLAY_MODE1 = 0xba,
JBT_REG_DISPLAY_MODE2 = 0xbb,
JBT_REG_DISPLAY_MODE = 0xbc,
JBT_REG_ASW_SLEW = 0xbd,
JBT_REG_DUMMY_DISPLAY = 0xbe,
JBT_REG_DRIVE_SYSTEM = 0xbf,
JBT_REG_SLEEP_OUT_FR_A = 0xc0,
JBT_REG_SLEEP_OUT_FR_B = 0xc1,
JBT_REG_SLEEP_OUT_FR_C = 0xc2,
JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
JBT_REG_GAMMA1_FINE_1 = 0xc7,
JBT_REG_GAMMA1_FINE_2 = 0xc8,
JBT_REG_GAMMA1_INCLINATION = 0xc9,
JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
JBT_REG_BLANK_CONTROL = 0xcf,
JBT_REG_BLANK_TH_TV = 0xd0,
JBT_REG_CKV_ON_OFF = 0xd1,
JBT_REG_CKV_1_2 = 0xd2,
JBT_REG_OEV_TIMING = 0xd3,
JBT_REG_ASW_TIMING_1 = 0xd4,
JBT_REG_ASW_TIMING_2 = 0xd5,
JBT_REG_HCLOCK_VGA = 0xec,
JBT_REG_HCLOCK_QVGA = 0xed,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int td028ttec1_panel_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return 0;
}
static void td028ttec1_panel_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
int r;
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
src->ops->set_timings(src, &ddata->vm);
r = src->ops->enable(src);
if (r)
return r;
dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
dssdev->state);
/* three times command zero */
r |= jbt_ret_write_0(ddata, 0x00);
usleep_range(1000, 2000);
r |= jbt_ret_write_0(ddata, 0x00);
usleep_range(1000, 2000);
r |= jbt_ret_write_0(ddata, 0x00);
usleep_range(1000, 2000);
if (r) {
dev_warn(dssdev->dev, "transfer error\n");
goto transfer_err;
}
/* deep standby out */
r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
/* Quad mode off */
r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
/* AVDD on, XVDD on */
r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
/* Output control */
r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
/* Sleep mode off */
r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
/* at this point we have like 50% grey */
/* initialize register set */
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
/*
* default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
* to avoid red / blue flicker
*/
r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
transfer_err:
return r ? -EIO : 0;
}
static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
if (!omapdss_device_is_enabled(dssdev))
return;
dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
src->ops->disable(src);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
ddata->vm = *vm;
src->ops->set_timings(src, vm);
}
static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*vm = ddata->vm;
}
static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
struct omap_dss_device *src = dssdev->src;
return src->ops->check_timings(src, vm);
}
static const struct omap_dss_device_ops td028ttec1_ops = {
.connect = td028ttec1_panel_connect,
.disconnect = td028ttec1_panel_disconnect,
.enable = td028ttec1_panel_enable,
.disable = td028ttec1_panel_disable,
.set_timings = td028ttec1_panel_set_timings,
.get_timings = td028ttec1_panel_get_timings,
.check_timings = td028ttec1_panel_check_timings,
};
static int td028ttec1_panel_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->bits_per_word = 9;
spi->mode = SPI_MODE_3;
r = spi_setup(spi);
if (r < 0) {
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
return r;
}
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
dev_set_drvdata(&spi->dev, ddata);
ddata->spi_dev = spi;
ddata->vm = td028ttec1_panel_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->ops = &td028ttec1_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
}
static int td028ttec1_panel_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
omapdss_device_unregister(dssdev);
td028ttec1_panel_disable(dssdev);
return 0;
}
static const struct of_device_id td028ttec1_of_match[] = {
{ .compatible = "omapdss,tpo,td028ttec1", },
/* keep to not break older DTB */
{ .compatible = "omapdss,toppoly,td028ttec1", },
{},
};
MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
static const struct spi_device_id td028ttec1_ids[] = {
{ "toppoly,td028ttec1", 0 },
{ "tpo,td028ttec1", 0},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
static struct spi_driver td028ttec1_spi_driver = {
.probe = td028ttec1_panel_probe,
.remove = td028ttec1_panel_remove,
.id_table = td028ttec1_ids,
.driver = {
.name = "panel-tpo-td028ttec1",
.of_match_table = td028ttec1_of_match,
.suppress_bind_attrs = true,
},
};
module_spi_driver(td028ttec1_spi_driver);
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink