Tony Lindgren f2e2c9d9b4 ARM: dts: Fix booting for secure omaps ... Commit 7ce93f3 (ARM: OMAP2+: Fix more missing data for omap3.dtsi file) fixed missing device tree data for omaps, but did not account for some of the hardware modules being inaccessible for secure omaps. This causes the following error on secure omaps: Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0c5048 SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0-rc2+ #446 task: ce057b40 ti: ce058000 task.ti: ce058000 PC is at omap_aes_dma_stop+0x24/0x3c LR is at omap_aes_probe+0x1cc/0x584 psr: 60000113 sp : ce059e20 ip : ce0b4ee0 fp : 00000000 r10: c0573ae8 r9 : c0749508 r8 : 00000000 r7 : ce0b4e00 r6 : 00000000 r5 : ce0b4e10 r4 : ce274890 r3 : fa0c5048 r2 : 00000048 r1 : 0000002c r0 : ce274890 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xce058248) Stack: (0xce059e20 to 0xce05a000) 9e20: c0749508 0000a1ff 00000000 c016cd8c c06b5a06 ce2a45f0 ce2a4570 ce0b5fb0 9e40: 00000000 480c5000 480c504f c0abe4e4 00000200 00000000 00000000 00000000 9e60: ce0b4e10 ce0b4e10 c082da3c c082da3c c02b8c70 c077c610 c0749508 00000000 9e80: 00000000 c02b9e7c c02b9e64 ce0b4e10 00000000 c02b8b20 ce0b4e10 ce0b4e44 9ea0: c082da3c c02b8cd8 00000000 ce059eb8 c082da3c c02b7408 ce079edc ce0b1a34 9ec0: c082da3c c082da3c ce2a0280 00000000 c08158d8 c02b8358 c0663405 c0663405 9ee0: 00000073 c082da3c c079e4e8 c07ab3bc c0844340 c02b9334 00000000 00000006 9f00: c079e4e8 c0008920 c067f6bf c0ac7c6b 00000000 c0712e28 00000000 00000000 9f20: c0712e38 ce059f38 00000093 c0ac7c82 00000000 c0058994 00000000 c07130e8 9f40: c07127b8 00000093 00000006 00000006 00000001 00000006 00000006 c079e4e8 9f60: c07ab3bc c0844340 00000093 c0749508 c079e4f4 c0749c64 00000006 00000006 9f80: c0749508 00000000 00000000 c0517e2c 00000000 00000000 00000000 00000000 9fa0: 00000000 c0517e34 00000000 c000dfb8 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff (omap_aes_probe+0x1cc/0x584) (platform_drv_probe+0x18/0x48) (driver_probe_device+0xb0/0x200) (__driver_attach+0x68/0x8c) (bus_for_each_dev+0x50/0x88) (bus_add_driver+0xcc/0x1c8) (driver_register+0x9c/0xe0) (do_one_initcall+0x98/0x140) (kernel_init_freeable+0x16c/0x23c) (kernel_init+0x8/0x100) (ret_from_fork+0x14/0x3c) Code: e1811002 e5932020 e590300c e0833002 (e593c000) Let's fix the issue by adding omap34xx-hs.dtsi and omap36xx-hs.dtsi and make n900, n9 and n950 to use them. This way we have the aes, sham and timer12 disabled for secure devices the same way legacy booting does based on the omap34xx_gp_hwmod_ocp_ifs and omap36xx_gp_hwmod_ocp_ifs arrays in omap_hwmod_3xxx_data.c. Reported-by: Sebastian Reichel <sre@debian.org> Acked-By: Sebastian Reichel <sre@debian.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>		2013-12-06 15:30:43 -08:00
..
include
testcases	of/irq: Fix bug in interrupt parsing refactor.	2013-11-03 23:16:35 +00:00
aks-cdu.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
am33xx.dtsi	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next	2013-11-13 17:40:34 +09:00
am43x-epos-evm.dts	ARM: dts: AM4372: Update Support for EPOS EVM	2013-10-20 19:16:55 +02:00
am335x-base0033.dts	ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support	2013-11-26 15:03:38 -08:00
am335x-bone-common.dtsi	ARM: dts: am335x-bone-common: correct mux mode for cmd line	2013-10-11 21:06:38 +02:00
am335x-bone.dts	ARM: dts: AM33XX: Add AES data and documentation	2013-10-11 21:06:40 +02:00
am335x-boneblack.dts	ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display	2013-10-11 21:06:42 +02:00
am335x-evm.dts	Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input	2013-11-15 16:43:53 -08:00
am335x-evmsk.dts	Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input	2013-11-15 16:43:53 -08:00
am335x-igep0033.dtsi	ARM: dts: AM33XX IGEP0033: add USB support	2013-11-26 15:03:39 -08:00
am335x-nano.dts	ARM: dts: Add support for Newflow NanoBone board	2013-10-22 14:56:33 +02:00
am3517_mt_ventoux.dts	ARM: dts: AM3XXX: Use #include for all device trees	2013-06-18 18:53:41 -05:00
am3517-evm.dts	ARM: OMAP2+: Fix the machine entry for am3517	2013-12-06 14:20:17 -08:00
am3517.dtsi	ARM: dts: Fix missing entries for am3517	2013-12-06 14:20:16 -08:00
am4372.dtsi	ARM: dts: AM33xx+: Add i2c aliases	2013-10-22 11:05:42 +02:00
animeo_ip.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
armada-370-db.dts	ARM: mvebu: re-enable PCIe on Armada 370 DB	2013-11-25 18:24:36 +00:00
armada-370-mirabox.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-370-netgear-rn102.dts	ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102	2013-10-01 00:46:30 +00:00
armada-370-netgear-rn104.dts	ARM: mvebu: Add Netgear ReadyNAS 104 board	2013-10-31 15:42:07 +00:00
armada-370-rd.dts	ARM: mvebu: Relocate PCIe node in Armada 370 RD board	2013-08-09 13:17:17 +00:00
armada-370-xp.dtsi	ARM: mvebu: use the virtual CPU registers to access coherency registers	2013-11-25 18:22:10 +00:00
armada-370.dtsi	ARM: mvebu: link PCIe controllers to the MSI controller	2013-09-30 15:00:27 +00:00
armada-xp-axpwifiap.dts	ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding	2013-08-07 20:05:05 +00:00
armada-xp-db.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-xp-gp.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-xp-matrix.dts	arm: mvebu: add support for the Armada XP Matrix board	2013-10-03 15:13:01 +00:00
armada-xp-mv78230.dtsi	ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable	2013-11-23 15:29:06 +00:00
armada-xp-mv78260.dtsi	ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260	2013-11-23 15:31:07 +00:00
armada-xp-mv78460.dtsi	ARM: mvebu: link PCIe controllers to the MSI controller	2013-09-30 15:00:27 +00:00
armada-xp-openblocks-ax3-4.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-xp.dtsi	Changes needed to prepare for making omap3 device tree only:	2013-10-14 15:29:24 -07:00
at91-ariag25.dts	ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled	2013-05-31 16:42:27 +02:00
at91-foxg20.dts	ARM: at91: switch Fox G20 board .dts to pre-processor defines	2013-05-31 16:42:28 +02:00
at91rm9200_pqfp.dtsi	ARM: at91/dt: add at91rm9200 PQFP package version	2013-08-21 12:18:52 +02:00
at91rm9200.dtsi	ARM: at91: at91rm9200: set default mmc0 pinctrl-names	2013-08-21 11:40:22 +02:00
at91rm9200ek.dts	ARM: at91: dt: rm9200ek: add spi support	2013-06-26 10:13:39 +02:00
at91sam9g15.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g15ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g20.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g20ek_2mmc.dts	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
at91sam9g20ek_common.dtsi	ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek	2013-10-18 16:50:13 +02:00
at91sam9g20ek.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
at91sam9g25.dtsi	ARM: at91/dt: split sam9x5 peripheral definitions	2013-10-16 15:47:07 +02:00
at91sam9g25ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g35.dtsi	ARM: at91/dt: split sam9x5 peripheral definitions	2013-10-16 15:47:07 +02:00
at91sam9g35ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g45.dtsi	Again some nice DT updates for AT91:	2013-06-14 18:51:21 -07:00
at91sam9m10g45ek.dts	ARM: at91: sam9m10g45ek add udc DT support	2013-06-15 00:15:22 +02:00
at91sam9n12.dtsi	ARM: at91: add ssc dma parameter for at91sam9n12	2013-10-14 09:42:38 +02:00
at91sam9n12ek.dts	ARM: at91: add sound support on at91sam9n12ek board	2013-10-14 09:43:26 +02:00
at91sam9x5_macb0.dtsi	ARM: at91/dt: split sam9x5 peripheral definitions	2013-10-16 15:47:07 +02:00
at91sam9x5_macb1.dtsi	ARM: at91/dt: split sam9x5 peripheral definitions	2013-10-16 15:47:07 +02:00
at91sam9x5_usart3.dtsi	ARM: at91: add usart3 alias to dtsi	2013-12-02 14:14:53 +01:00
at91sam9x5.dtsi	Via Paul Walmsley <paul@pwsan.com>:	2013-10-28 14:39:03 -07:00
at91sam9x5cm.dtsi	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
at91sam9x5ek.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
at91sam9x25.dtsi	ARM: at91/dt: split sam9x5 peripheral definitions	2013-10-16 15:47:07 +02:00
at91sam9x25ek.dts	Adding the DT support to USB gadget High-Speed aka usba.	2013-06-14 18:58:28 -07:00
at91sam9x35.dtsi	ARM: at91/dt: split sam9x5 peripheral definitions	2013-10-16 15:47:07 +02:00
at91sam9x35ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9260.dtsi	ARM: at91: at91sam9260: add missing pinctrl-names on mmc	2013-08-21 11:14:18 +02:00
at91sam9263.dtsi	Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dt	2013-06-07 16:39:38 -07:00
at91sam9263ek.dts	ARM: at91/dts: add the watchdog nodes for at91 boards	2013-05-31 21:54:50 +02:00
atlas6-evb.dts
atlas6.dtsi	Main pin control pull request for the v3.13 cycle:	2013-11-12 15:40:03 +09:00
bcm2835-rpi-b.dts	ARM: bcm2835: Add Raspberry Pi's ACT LED to DT	2013-05-16 20:29:48 -06:00
bcm2835.dtsi	ARM: bcm2835: add missing #xxx-cells to I2C nodes	2013-11-25 21:56:00 -08:00
bcm11351-brt.dts	ARM: dts: bcm281xx: Add card detect GPIO	2013-10-31 10:29:43 -07:00
bcm11351.dtsi	ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts	2013-10-31 10:30:14 -07:00
bcm28155-ap.dts	ARM: dts: bcm281xx: Add card detect GPIO	2013-10-31 10:29:43 -07:00
cros5250-common.dtsi	ARM: dts: Add max77686 RTC interrupt to cros5250-common	2013-11-25 15:14:41 -08:00
da850-enbw-cmc.dts	ARM: davinci: da850: Use #include for all device trees	2013-06-20 15:04:30 +05:30
da850-evm.dts	ARM: davinci: da850: add DT node for ethernet	2013-08-22 00:44:58 +05:30
da850.dtsi	ARM: davinci: da850: do not specify clock_frequency for UART DT node	2013-08-22 00:44:58 +05:30
dove-cm-a510.dts	ARM: dove: use preprocessor on device tree files	2013-09-30 15:00:35 +00:00
dove-cubox.dts	ARM: Dove: fix bad properties of the si5351 clkout2 used by Cubox audio	2013-10-09 13:22:41 +00:00
dove-d2plug.dts	ARM: dove: use preprocessor on device tree files	2013-09-30 15:00:35 +00:00
dove-d3plug.dts	ARM: dove: add initial DT file for Globalscale D3Plug	2013-09-30 15:00:54 +00:00
dove-dove-db.dts	ARM: dove: use preprocessor on device tree files	2013-09-30 15:00:35 +00:00
dove.dtsi	ARM: Dove: Add the audio device to the Cubox DT	2013-10-09 13:20:23 +00:00
dra7-evm.dts	ARM: dts: dra7-evm: add smps123 supply for CPU	2013-10-22 17:33:17 +02:00
dra7.dtsi	ARM: dts: DRA7: Add CPU OPP table	2013-10-22 17:33:40 +02:00
ea3250.dts
ecx-2000.dts	ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi	2013-11-04 17:01:05 -06:00
ecx-common.dtsi	EDAC updates for 3.13	2013-11-18 14:50:17 -08:00
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts	ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS	2013-10-08 10:02:21 +09:00
emev2.dtsi	ARM: shmobile: emev2: add PMU information to emev2.dtsi	2013-07-31 15:31:16 +09:00
ethernut5.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
evk-pro3.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
exynos4.dtsi	ARM: dts: Add MIPI PHY node to exynos4.dtsi	2013-10-06 09:14:39 +09:00
exynos4x12-pinctrl.dtsi	ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals	2013-08-06 02:49:43 +09:00
exynos4x12.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
exynos5.dtsi	ARM: dts: Fix the RTC DT node name for Exynos5250	2013-08-26 02:28:05 +09:00
exynos4210-origen.dts	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
exynos4210-pinctrl.dtsi	ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes	2013-08-07 01:08:24 +09:00
exynos4210-smdkv310.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4210-trats.dts	ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards	2013-10-16 07:25:40 +09:00
exynos4210-universal_c210.dts	ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board	2013-10-16 07:25:41 +09:00
exynos4210.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
exynos4212.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4412-odroidx.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4412-origen.dts	ARM: dts: Add fixed voltage regulator to simple bus for origen	2013-10-06 09:21:23 +09:00
exynos4412-smdk4412.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4412-trats2.dts	ARM: dts: Add SPI1 controller and s5c73m3 sensor node for TRATS2	2013-08-07 01:07:57 +09:00
exynos4412.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos5250-arndale.dts	ARM: dts: Add HDMI related I2C nodes for Arndale board	2013-10-08 06:53:12 +09:00
exynos5250-pinctrl.dtsi	ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250	2013-10-16 07:23:42 +09:00
exynos5250-smdk5250.dts	ARM: dts: Disable Exynos5250 I2S controllers by default	2013-10-07 23:13:47 +09:00
exynos5250-snow.dts	ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC	2013-08-26 02:28:05 +09:00
exynos5250.dtsi	Merge most of tag 'tags/exynos-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git into next/dt	2013-10-27 21:54:02 -07:00
exynos5420-pinctrl.dtsi	ARM: dts: Add pin state information for DP HPD support to Exynos5420	2013-08-19 01:56:31 +09:00
exynos5420-smdk5420.dts	ARM: dts: enable hdmi subsystem for exynos5420 smdk board	2013-10-08 06:49:46 +09:00
exynos5420.dtsi	ARM: dts: add dt nodes for hdmi subsystem for exynos5420	2013-10-08 06:49:46 +09:00
exynos5440-sd5v1.dts	ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards	2013-10-16 07:23:55 +09:00
exynos5440-ssdk5440.dts	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
exynos5440.dtsi	ARM: dts: use 'status' property for PCIe nodes	2013-10-29 12:45:57 -07:00
ge863-pro3.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
highbank.dts	ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi	2013-11-04 17:01:05 -06:00
imx6dl-pinfunc.h	ARM: dts: imx: share pad macro names between imx6q and imx6dl	2013-08-22 23:29:11 +08:00
imx6dl-sabreauto.dts	ARM: dts: imx: share pad macro names between imx6q and imx6dl	2013-08-22 23:29:11 +08:00
imx6dl-sabresd.dts	ARM: dts: imx: share pad macro names between imx6q and imx6dl	2013-08-22 23:29:11 +08:00
imx6dl-wandboard.dts	ARM: dts: imx6: Add support for imx6q wandboard	2013-08-22 23:29:28 +08:00
imx6dl.dtsi	ARM: dts: imx: ocram size is different between imx6q and imx6dl	2013-08-22 23:29:44 +08:00
imx6q-arm2.dts	ARM: dts: imx6qdl/imx6sl: add the dma property for uart	2013-08-22 23:29:16 +08:00
imx6q-phytec-pbab01.dts	ARM: dts: Phytec imx6q pfla02 and pbab01 support	2013-06-17 16:04:31 +08:00
imx6q-phytec-pfla02.dtsi	ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module	2013-08-22 23:29:50 +08:00
imx6q-pinfunc.h	ARM: dts: imx6q: add quirky select input for USB_OTG_ID	2013-09-26 13:01:37 +08:00
imx6q-sabreauto.dts	ARM: dtsi: enable ahci sata on imx6q platforms	2013-08-22 23:29:25 +08:00
imx6q-sabrelite.dts	ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog	2013-09-29 15:37:33 +08:00
imx6q-sabresd.dts	ARM: dtsi: enable ahci sata on imx6q platforms	2013-08-22 23:29:25 +08:00
imx6q-sbc6x.dts	ARM: dts: MicroSys sbc6x support (i.MX6)	2013-04-09 22:53:37 +08:00
imx6q-udoo.dts	ARM: dts: imx6q-udoo: Add initial board support	2013-09-27 13:31:44 +08:00
imx6q-wandboard.dts	ARM: dts: imx6q-wandboard: Add sata support	2013-08-22 23:29:30 +08:00
imx6q.dtsi	ARM: dts: imx: ocram size is different between imx6q and imx6dl	2013-08-22 23:29:44 +08:00
imx6qdl-sabreauto.dtsi	ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3	2013-09-26 13:01:35 +08:00
imx6qdl-sabresd.dtsi	ARM: dts: imx6qdl-sabresd: Add backlight support for lvds	2013-10-12 16:15:05 +08:00
imx6qdl-wandboard.dtsi	ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios	2013-09-29 15:37:46 +08:00
imx6qdl.dtsi	ARM: dts: imx6qdl: disable spdif "rxtx5" clock option	2013-11-18 09:21:29 +08:00
imx6sl-evk.dts	ARM: dts: imx6sl-evk: enable the SPI NOR	2013-10-18 16:27:45 +08:00
imx6sl-pinfunc.h	pinctrl: add pinctrl driver for imx6sl	2013-04-09 22:53:38 +08:00
imx6sl.dtsi	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
imx23-evk.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx23-olinuxino.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx23-pinfunc.h	ARM: dts: mxs: add pinctrl header files	2013-09-26 13:01:36 +08:00
imx23-stmp378x_devb.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx23.dtsi	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
imx25-karo-tx25.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx25-pdk.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx25.dtsi	ARM: dts: imx25: Make lcdc compatible to imx21 fb	2013-08-22 23:29:15 +08:00
imx27-apf27.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx27-apf27dev.dts	ARM: imx27-apf27dev: Add framebuffer support	2013-10-08 14:36:41 +08:00
imx27-pdk.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx27-phytec-phycard-s-rdk.dts	ARM: dts: imx27 phyCARD-S, i2c ADC device node	2013-08-22 23:29:05 +08:00
imx27-phytec-phycard-s-som.dts	ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk	2013-08-22 23:29:03 +08:00
imx27-phytec-phycore-rdk.dts	ARM: dts: imx27-phytec-phycore-rdk: Add CAN node	2013-08-22 23:28:56 +08:00
imx27-phytec-phycore-som.dts	ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX	2013-08-22 23:29:57 +08:00
imx27.dtsi	ARM: imx27: add missing #pwm-cells property	2013-10-18 16:27:01 +08:00
imx28-apf28.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers	2013-09-26 13:01:36 +08:00
imx28-apf28dev.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-apx4devkit.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-cfa10036.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-cfa10037.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-cfa10049.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-cfa10055.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-cfa10056.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-cfa10057.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-cfa10058.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-evk.dts	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
imx28-m28cu3.dts	ARM: dts: mxs: Add MSR M28CU3 board	2013-10-05 10:16:33 +08:00
imx28-m28evk.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-pinfunc.h	ARM: dts: mxs: add pinctrl header files	2013-09-26 13:01:36 +08:00
imx28-sps1.dts	ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines	2013-09-26 13:01:37 +08:00
imx28-tx28.dts	ARM: dts: tx28: restructure and update DTS file	2013-09-26 13:01:37 +08:00
imx28.dtsi	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
imx31-bug.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx31.dtsi	ARM: dts: imx: Add the missing cpus node	2013-08-22 23:29:01 +08:00
imx35-pinfunc.h	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx51-apf51.dts	ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template	2013-08-22 23:29:53 +08:00
imx51-apf51dev.dts	ARM: imx51-apf51dev: Add parallel display support	2013-10-08 14:36:33 +08:00
imx51-babbage.dts	ARM: dts: imx51-babbage: Make DVI and WVGA panel functional	2013-10-09 09:38:17 +08:00
imx51-pinfunc.h	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx51.dtsi	ARM: dts: i.MX51: Fix OTG PHY clock	2013-11-11 22:58:45 +08:00
imx53-ard.dts	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx53-evk.dts	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx53-m53evk.dts	ARM: mx5: Add support for DENX M53EVK	2013-06-17 16:04:16 +08:00
imx53-mba53.dts	ARM i.MX53: mba53: Fix PWM backlight DT node	2013-07-15 08:28:10 +08:00
imx53-pinfunc.h	ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration	2013-04-09 22:53:37 +08:00
imx53-qsb.dts	ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source	2013-10-06 19:53:22 +08:00
imx53-smd.dts	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx53-tqma53.dtsi	ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2	2013-06-17 16:04:26 +08:00
imx53-tx53.dtsi	ARM: dts: add Ka-Ro tx53 devicetree	2013-06-17 16:04:18 +08:00
imx53.dtsi	ARM: imx: add ocram clock for imx53	2013-08-22 23:29:46 +08:00
integrator.dtsi	ARM: integrator: move CM base into device tree	2013-10-16 14:09:56 +02:00
integratorap.dts	ARM: integrator: core module registers from compatible strings	2013-10-16 14:10:14 +02:00
integratorcp.dts	ARM: SoC platform changes for 3.13	2013-11-11 16:49:45 +09:00
keystone-clocks.dtsi	ARM: dts: keystone: Add clock tree data to devicetree	2013-10-08 15:31:14 -04:00
keystone.dts	ARM: dts: keystone: Add the SPI nodes	2013-10-10 19:52:17 -04:00
kirkwood-98dx4122.dtsi
kirkwood-6281.dtsi	ARM: kirkwood: Relocate PCIe device tree nodes	2013-08-06 14:11:53 +00:00
kirkwood-6282.dtsi	ARM: kirkwood: Relocate PCIe device tree nodes	2013-08-06 14:11:53 +00:00
kirkwood-cloudbox.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-db-88f6281.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-db-88f6282.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-db.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-dns320.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-dns325.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-dnskw.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-dockstar.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-dreamplug.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-goflexnet.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-guruplug-server-plus.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-ib62x0.dts	ARM: kirkwood: ib62x0: add u-boot environment partition	2013-10-03 12:52:47 +00:00
kirkwood-iconnect.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-iomega_ix2_200.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-is2.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-km_kirkwood.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-lschlv2.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-lsxhl.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-lsxl.dtsi	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-mplcec4.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-mv88f6281gtw-ge.dts	ARM: kirkwood: use dts pre-processor for mv88f6281gtw-ge	2013-08-06 16:14:14 +00:00
kirkwood-netgear_readynas_duo_v2.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-ns2-common.dtsi	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2lite.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2max.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2mini.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-nsa310-common.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-nsa310.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-nsa310a.dts	ARM: kirkwood: use dts pre-processor for nsa310 boards	2013-08-16 13:02:08 +00:00
kirkwood-openblocks_a6.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-openblocks_a7.dts	ARM: kirkwood: add support for OpenBlocks A7 platform	2013-10-30 19:55:34 +00:00
kirkwood-sheevaplug-common.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-sheevaplug-esata.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-sheevaplug.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-topkick.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-ts219-6281.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ts219-6282.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-ts219.dtsi	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood.dtsi	Changes needed to prepare for making omap3 device tree only:	2013-10-14 15:29:24 -07:00
kizbox.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
lpc32xx.dtsi	ARM: dts: lpc32xx: cpus/cpu nodes dts updates	2013-05-23 10:45:13 +01:00
Makefile	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
marco-evb.dts
marco.dtsi
mmp2-brownstone.dts
mmp2.dtsi	ARM: mmp: add more compatible names in gpio driver	2013-04-11 10:00:34 +08:00
mpa1600.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
mxs-pinfunc.h	ARM: dts: mxs: add pinctrl header files	2013-09-26 13:01:36 +08:00
nspire-classic.dtsi	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire-clp.dts	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire-cx.dts	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire-tp.dts	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire.dtsi	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
omap2.dtsi	ARM: dts: Fix omap2 specific dtsi files by adding the missing entries	2013-11-15 14:35:29 -08:00
omap3-beagle-xm.dts	ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)	2013-11-26 15:03:39 -08:00
omap3-beagle.dts	ARM: dts: omap3-beagle: Add omap-twl4030 audio support	2013-12-02 11:38:14 -08:00
omap3-devkit8000.dts	ARM: dts: omap3-devkit8000: fix a typo in GMPC node	2013-10-11 21:06:33 +02:00
omap3-evm-37xx.dts	ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)	2013-10-14 11:34:37 -07:00
omap3-evm-common.dtsi	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
omap3-evm.dts	ARM: dts: Add common support for omap3-evm	2013-10-14 11:34:37 -07:00
omap3-gta04.dts	ARM: dts: omap3: Adapt USB OTG to generic PHY framework	2013-10-20 19:16:08 +02:00
omap3-igep0020.dts	ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi	2013-11-26 15:03:39 -08:00
omap3-igep0030.dts	ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor	2013-11-26 15:03:37 -08:00
omap3-igep.dtsi	ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices	2013-11-26 15:03:37 -08:00
omap3-n9.dts	ARM: dts: add minimal DT support for Nokia N950 & N9 phones	2013-10-18 10:24:33 -07:00
omap3-n900.dts	ARM: dts: Fix booting for secure omaps	2013-12-06 15:30:43 -08:00
omap3-n950-n9.dtsi	ARM: dts: Fix booting for secure omaps	2013-12-06 15:30:43 -08:00
omap3-n950.dts	ARM: dts: add minimal DT support for Nokia N950 & N9 phones	2013-10-18 10:24:33 -07:00
omap3-overo.dtsi	ARM: dts: omap: update usb_otg_hs data	2013-09-27 17:36:58 -07:00
omap3-tobi.dts	ARM: dts: omap3-tobi: Correct polarity for GPIO LED	2013-06-19 04:38:14 -05:00
omap3-zoom3.dts	ARM: dts: Add basic support for zoom3	2013-10-18 10:24:33 -07:00
omap3.dtsi	ARM: OMAP2+: Fix more missing data for omap3.dtsi file	2013-11-25 14:23:45 -08:00
omap4-panda-a4.dts	ARM: dts: OMAP2+: Use pinctrl constants	2013-06-18 18:53:40 -05:00
omap4-panda-common.dtsi	ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx	2013-12-02 11:38:13 -08:00
omap4-panda-es.dts	ARM: dts: omap4-panda-es: Do not reset gpio1	2013-10-20 19:16:53 +02:00
omap4-panda.dts	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap4-sdp-es23plus.dts	ARM: dts: OMAP2+: Use pinctrl constants	2013-06-18 18:53:40 -05:00
omap4-sdp.dts	ARM: dts: omap4-sdp: Fix pin muxing for wl12xx	2013-12-02 11:38:14 -08:00
omap4-var-som.dts	ARM: dts: OMAP4/5: Use existing constants for IRQs	2013-06-18 18:53:39 -05:00
omap4.dtsi	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
omap5-uevm.dts	ARM: dts: omap5-uevm: Remove pinmux for dmic pins	2013-10-23 11:40:47 +02:00
omap5.dtsi	ARM: SoC DT updates for 3.13	2013-11-11 17:34:56 +09:00
omap34xx-hs.dtsi	ARM: dts: Fix booting for secure omaps	2013-12-06 15:30:43 -08:00
omap34xx.dtsi	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap36xx-hs.dtsi	ARM: dts: Fix booting for secure omaps	2013-12-06 15:30:43 -08:00
omap36xx.dtsi	ARM: dts: Add missing reg, interrupt and dma entries for omap3	2013-10-22 05:34:49 -07:00
omap443x.dtsi	ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices	2013-06-18 18:53:46 -05:00
omap2420-h4.dts	ARM: dts: Remove '0x's from OMAP2420 H4 DTS file	2013-10-08 17:51:40 +02:00
omap2420.dtsi	ARM: dts: Fix omap2 specific dtsi files by adding the missing entries	2013-11-15 14:35:29 -08:00
omap2430.dtsi	ARM: dts: Fix omap2 specific dtsi files by adding the missing entries	2013-11-15 14:35:29 -08:00
omap3430-sdp.dts	ARM: dts: Remove '0x's from OMAP3430 SDP DTS file	2013-10-08 17:51:41 +02:00
omap4460.dtsi	ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices	2013-06-18 18:53:46 -05:00
omap-gpmc-smsc911x.dtsi	ARM: dts: Fix the name of supplies for smsc911x shared by OMAP	2013-12-02 11:38:15 -08:00
omap-zoom-common.dtsi	ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x	2013-11-15 14:33:26 -08:00
orion5x-lacie-ethernet-disk-mini-v2.dts	ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes	2013-07-25 20:54:10 +00:00
orion5x.dtsi	ARM: orion5x: update intc device tree node to new reg layout	2013-07-25 21:07:09 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi	ARM: dts: picoxcell: cpus/cpu nodes dts updates	2013-05-23 10:45:15 +01:00
picoxcell-pc3x3.dtsi	ARM: dts: picoxcell: cpus/cpu nodes dts updates	2013-05-23 10:45:15 +01:00
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
prima2-evb.dts
prima2.dtsi	Main pin control pull request for the v3.13 cycle:	2013-11-12 15:40:03 +09:00
pxa2xx.dtsi	ARM: dts: pxa2xx: cpus/cpu nodes dts updates	2013-05-23 10:45:17 +01:00
pxa3xx.dtsi	ARM: pxa: DTS: override gpio node in pxa3xx.dtsi	2013-08-13 15:51:02 -07:00
pxa27x.dtsi
pxa168-aspenite.dts
pxa168.dtsi	ARM: mmp: add more compatible names in gpio driver	2013-04-11 10:00:34 +08:00
pxa910-dkb.dts
pxa910.dtsi	ARM: mmp: add more compatible names in gpio driver	2013-04-11 10:00:34 +08:00
qcom-msm8660-surf.dts	ARM: msm: Rename msm devicetrees to have standard 'qcom' prefix	2013-09-25 13:02:56 -07:00
qcom-msm8960-cdp.dts	ARM: msm: Rename msm devicetrees to have standard 'qcom' prefix	2013-09-25 13:02:56 -07:00
r7s72100-genmai.dts	ARM: shmobile: Genmai support	2013-10-08 10:02:20 +09:00
r7s72100.dtsi	ARM: shmobile: Initial r7s72100 SoC support	2013-10-08 09:53:00 +09:00
r8a73a4-ape6evm-reference.dts	ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards	2013-10-08 09:25:13 +09:00
r8a73a4-ape6evm.dts	ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards	2013-10-08 09:25:13 +09:00
r8a73a4.dtsi	Changes needed to prepare for making omap3 device tree only:	2013-10-14 15:29:24 -07:00
r8a7740-armadillo800eva-reference.dts	ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces	2013-10-08 09:25:14 +09:00
r8a7740-armadillo800eva.dts	ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs	2013-08-06 18:07:13 +09:00
r8a7740.dtsi	ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces	2013-10-08 09:25:14 +09:00
r8a7778-bockw-reference.dts	ARM: shmobile: bockw: fixup ether node naming	2013-10-08 10:37:49 +09:00
r8a7778-bockw.dts	ARM: shmobile: Mount root file systems in r/w mode for all DT platforms	2013-08-05 16:45:33 +09:00
r8a7778.dtsi	Changes needed to prepare for making omap3 device tree only:	2013-10-14 15:29:24 -07:00
r8a7779-marzen-reference.dts	ARM: shmobile: marzen: fixup SMSC IRQ number on DTS	2013-10-08 09:25:22 +09:00
r8a7779-marzen.dts	ARM: shmobile: marzen: Add r8a7779-marzen.dtb	2013-07-30 13:27:56 +09:00
r8a7779.dtsi	Changes needed to prepare for making omap3 device tree only:	2013-10-14 15:29:24 -07:00
r8a7790-lager-reference.dts	ARM: shmobile: Mount root file systems in r/w mode for all DT platforms	2013-08-05 16:45:33 +09:00
r8a7790-lager.dts	ARM: shmobile: lager: enable nfsroot in DTS	2013-08-06 18:06:20 +09:00
r8a7790.dtsi	Changes needed to prepare for making omap3 device tree only:	2013-10-14 15:29:24 -07:00
r8a7791-koelsch.dts	ARM: shmobile: Koelsch support	2013-09-30 16:56:17 +09:00
r8a7791.dtsi	ARM: shmobile: r8a7791 SMP device tree node	2013-10-08 09:25:22 +09:00
rk3xxx.dtsi	ARM: rockchip: enable arm-global-timer	2013-10-14 23:03:23 +02:00
rk3066a-bqcurie2.dts	ARM: rockchip: add dts for bqcurie2 tablet	2013-10-14 23:03:46 +02:00
rk3066a-clocks.dtsi	arm: Add basic clocks for Rockchip rk3066a SoCs	2013-06-21 09:20:56 +02:00
rk3066a.dtsi	ARM: SoC board updates for 3.13	2013-11-11 16:57:16 +09:00
rk3188-clocks.dtsi	ARM: rockchip: add support for rk3188 and Radxa Rock board	2013-10-14 23:04:09 +02:00
rk3188-radxarock.dts	ARM: rockchip: add support for rk3188 and Radxa Rock board	2013-10-14 23:04:09 +02:00
rk3188.dtsi	ARM: rockchip: add support for rk3188 and Radxa Rock board	2013-10-14 23:04:09 +02:00
s3c24xx.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
s3c64xx-pinctrl.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
s3c64xx.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
s3c2416-pinctrl.dtsi	ARM: dts: add devicetree support for s3c2416-smdk2416	2013-05-21 01:06:12 +09:00
s3c2416-smdk2416.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
s3c2416.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
s3c6400.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
s3c6410-mini6410.dts	ARM: dts: Add dts file for S3C6410-based Mini6410 board	2013-09-17 06:48:29 +09:00
s3c6410-smdk6410.dts	ARM: dts: Add dts file for S3C6410-based SMDK6410 board	2013-09-17 06:48:29 +09:00
s3c6410.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
sama5d3_can.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3_emac.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3_gmac.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3_lcd.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3_mci2.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3_tcb1.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3_uart.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3xcm.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d3xdm.dtsi	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
sama5d3xmb.dtsi	ARM: at91/dt: fix phy address in sama5xmb to match the reg property	2013-08-29 15:21:45 -04:00
sama5d31.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d31ek.dts	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d33.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d33ek.dts	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d34.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d34ek.dts	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d35.dtsi	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
sama5d35ek.dts	ARM: at91/dt: split sama5d3 peripheral definitions	2013-10-16 15:47:08 +02:00
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g-reference.dts	ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards	2013-10-08 09:25:13 +09:00
sh73a0-kzm9g.dts	ARM: shmobile: Mount root file systems in r/w mode for all DT platforms	2013-08-05 16:45:33 +09:00
sh73a0.dtsi	Changes needed to prepare for making omap3 device tree only:	2013-10-14 15:29:24 -07:00
sh7372-mackerel.dts
sh7372.dtsi	ARM: shmobile: sh7372: Add pin control device to device tree	2013-07-22 10:12:36 +09:00
skeleton64.dtsi	ARM: dts: Fix memory node in skeleton64.dtsi	2013-08-07 16:33:50 +00:00
skeleton.dtsi
socfpga_arria5_socdk.dts	dts: socfpga: Add support for Altera's SOCFPGA Arria V board	2013-10-09 16:58:31 -05:00
socfpga_arria5.dtsi	dts: socfpga: Add support for Altera's SOCFPGA Arria V board	2013-10-09 16:58:31 -05:00
socfpga_cyclone5_socdk.dts	ARM: socfpga: dts: Move common nodes to cyclone5 dtsi	2013-10-09 16:56:24 -05:00
socfpga_cyclone5_sockit.dts	ARM: socfpga: dts: Add support for terasic SoCkit	2013-10-09 16:57:08 -05:00
socfpga_cyclone5.dtsi	ARM: socfpga: dts: Move common nodes to cyclone5 dtsi	2013-10-09 16:56:24 -05:00
socfpga_vt.dts	ARM: socfpga: dts: Add ethernet bindings for SOCFPGA	2013-06-11 16:34:57 -07:00
socfpga.dtsi	arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk	2013-12-03 14:19:53 -08:00
spear3xx.dtsi	ARM: dts: spear: cpus/cpu nodes dts updates	2013-05-23 10:45:21 +01:00
spear13xx.dtsi	ARM: dts: spear: cpus/cpu nodes dts updates	2013-05-23 10:45:21 +01:00
spear300-evb.dts
spear300.dtsi
spear310-evb.dts
spear310.dtsi
spear320-evb.dts
spear320-hmi.dts
spear320.dtsi
spear600-evb.dts
spear600.dtsi	ARM: dts: spear: cpus/cpu nodes dts updates	2013-05-23 10:45:21 +01:00
spear1310-evb.dts
spear1310.dtsi
spear1340-evb.dts
spear1340.dtsi	ARM: arm-soc: late cleanups	2013-05-07 11:22:14 -07:00
st-pincfg.h	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
ste-ccu8540-pinctrl.dtsi	ARM: ux500: fix devicetree builds	2013-08-14 22:32:07 +02:00
ste-ccu8540.dts	ARM: ux500: fix devicetree builds	2013-08-14 22:32:07 +02:00
ste-ccu9540.dts	ARM: ux500: fix devicetree builds	2013-08-14 22:32:07 +02:00
ste-dbx5x0.dtsi	ARM: ux500: register all SSP and SPI blocks	2013-10-18 14:55:44 +02:00
ste-href-stuib.dtsi	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-href-tvk1281618.dtsi	ARM: ux500: register the tc35892 GPIO on the TVK UIB	2013-10-03 10:18:36 +02:00
ste-href.dtsi	ARM: ux500: move TC35892 at 0x42 to hrefprev60	2013-10-02 16:17:03 +02:00
ste-hrefprev60-stuib.dts	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-hrefprev60-tvk.dts	ARM: ux500: split the HREF DTS files from two to four	2013-10-02 16:17:04 +02:00
ste-hrefprev60.dtsi	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-hrefv60plus-stuib.dts	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-hrefv60plus-tvk.dts	ARM: ux500: split the HREF DTS files from two to four	2013-10-02 16:17:04 +02:00
ste-hrefv60plus.dtsi	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-nomadik-pinctrl.dtsi	ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2	2013-08-06 23:48:50 +02:00
ste-nomadik-s8815.dts	Nomadik DT and clock work:	2013-06-20 16:13:10 +02:00
ste-nomadik-stn8815.dtsi	ARM: nomadik: delete FSMC platform data	2013-09-24 21:25:19 +02:00
ste-snowball.dts	ARM: ux500: Enable CPUFreq on Snowball	2013-09-26 11:09:27 +02:00
ste-u300.dts	ARM: u300: switch to using syscon regmap for board	2013-06-17 13:54:39 +02:00
stih41x-b2000.dtsi	ARM: stih41x: Add B2000 board support	2013-06-25 13:42:50 -07:00
stih41x-b2020.dtsi	ARM: stih41x: Add B2020 board support	2013-06-25 13:42:51 -07:00
stih41x.dtsi	ARM: STi: Fix cpu nodes with correct device_type.	2013-08-04 13:40:48 -07:00
stih415-b2000.dts	ARM: stih41x: Add B2000 board support	2013-06-25 13:42:50 -07:00
stih415-b2020.dts	ARM: stih41x: Add B2020 board support	2013-06-25 13:42:51 -07:00
stih415-clock.dtsi	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
stih415-pinctrl.dtsi	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
stih415.dtsi	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
stih416-b2000.dts	ARM: stih41x: Add B2000 board support	2013-06-25 13:42:50 -07:00
stih416-b2020.dts	ARM: stih41x: Add B2020 board support	2013-06-25 13:42:51 -07:00
stih416-clock.dtsi	ARM: sti: Add STiH416 SOC support	2013-06-25 13:26:58 -07:00
stih416-pinctrl.dtsi	ARM: dts: STi: Fix pinconf setup for STiH416 serial2	2013-07-22 19:34:55 -07:00
stih416.dtsi	ARM: dts: STi: Fix pinconf setup for STiH416 serial2	2013-07-22 19:34:55 -07:00
sun4i-a10-a1000.dts	ARM: sunxi: dt: Add device tree for Mele A1000	2013-08-14 09:59:20 +02:00
sun4i-a10-cubieboard.dts	ARM: sun4i: dt: Fix A10 SoC bus base address	2013-08-10 19:13:43 +02:00
sun4i-a10-hackberry.dts	ARM: sun4i: dt: Fix A10 SoC bus base address	2013-08-10 19:13:43 +02:00
sun4i-a10-mini-xplus.dts	ARM: sun4i: dt: Fix A10 SoC bus base address	2013-08-10 19:13:43 +02:00
sun4i-a10.dtsi	ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i	2013-09-16 18:22:12 -05:00
sun5i-a10s-olinuxino-micro.dts	ARM: sun5i: dt: Fix A10s SoC bus base address	2013-08-10 19:13:44 +02:00
sun5i-a10s.dtsi	ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i	2013-09-16 18:22:12 -05:00
sun5i-a13-olinuxino.dts	ARM: sun5i: dt: Fix A13 SoC bus base address	2013-08-10 19:13:45 +02:00
sun5i-a13.dtsi	ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i	2013-09-16 18:22:12 -05:00
sun6i-a31-colombus.dts	ARM: sun6i: colombus: Add uart0 muxing	2013-08-22 00:19:17 +02:00
sun6i-a31.dtsi	ARM: sun6i: Fix the APB2 clock gates register size	2013-10-05 15:36:10 +02:00
sun7i-a20-cubieboard2.dts	ARM: sun7i: cubieboard2: Enable the I2C controllers	2013-09-18 11:35:38 -05:00
sun7i-a20-cubietruck.dts	ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck	2013-10-08 11:35:19 +02:00
sun7i-a20-olinuxino-micro.dts	ARM: sun7i: olinuxino-micro: Enable the I2C controllers	2013-09-18 11:35:38 -05:00
sun7i-a20.dtsi	ARM: sun7i: Add the pin muxing options for the I2C controllers	2013-09-18 11:35:37 -05:00
tegra20-colibri-512.dtsi	ARM: tegra: device tree changes for 3.12	2013-08-20 16:30:54 -07:00
tegra20-harmony.dts	ARM: tegra: harmony: Initialize PCIe from DT	2013-08-12 14:19:21 -06:00
tegra20-iris-512.dts	ARM: tegra: convert device tree files to use GPIO defines	2013-05-28 16:13:49 -06:00
tegra20-medcom-wide.dts	ARM: tegra20: convert device tree files to use CLK defines	2013-05-28 16:13:50 -06:00
tegra20-paz00.dts	ARM: tegra: enable LP1 suspend mode	2013-08-12 12:23:14 -06:00
tegra20-plutux.dts	ARM: tegra20: convert device tree files to use CLK defines	2013-05-28 16:13:50 -06:00
tegra20-seaboard.dts	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra20-tamonten.dtsi	ARM: tegra: tamonten: Add PCIe support	2013-08-12 14:19:12 -06:00
tegra20-tec.dts	ARM: tegra: tec: Add PCIe support	2013-08-12 14:19:16 -06:00
tegra20-trimslice.dts	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra20-ventana.dts	ARM: tegra: enable LP1 suspend mode	2013-08-12 12:23:14 -06:00
tegra20-whistler.dts	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra20.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra30-beaver.dts	ARM: tegra: add Mic Jack to Beaver device tree	2013-08-15 09:35:07 -06:00
tegra30-cardhu-a02.dts	ARM: tegra: convert device tree files to use GPIO defines	2013-05-28 16:13:49 -06:00
tegra30-cardhu-a04.dts	ARM: tegra: convert device tree files to use GPIO defines	2013-05-28 16:13:49 -06:00
tegra30-cardhu.dtsi	ARM: tegra: add vcc supply for nct1008 to Cardhu	2013-10-07 13:17:35 -06:00
tegra30.dtsi	ARM: tegra: Use symbolic names for gr3d clocks	2013-10-17 11:42:47 -06:00
tegra114-dalmore.dts	ARM: tegra: add DT entry for nct1008 to Dalmore	2013-10-07 13:17:34 -06:00
tegra114.dtsi	ARM: tegra: fix Tegra114 IOMMU register address	2013-10-30 17:38:27 -07:00
tegra124-venice2.dts	ARM: tegra: enable LP1 suspend mode for Venice2	2013-10-11 12:32:17 -06:00
tegra124.dtsi	ARM: tegra: add GPIO controller to tegra124.dtsi	2013-10-15 09:25:28 -06:00
tny_a9g20.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
tny_a9260_common.dtsi
tny_a9260.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
tny_a9263.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
tps6507x.dtsi
tps65217.dtsi
tps65910.dtsi
twl4030_omap3.dtsi	ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line	2013-06-18 18:53:45 -05:00
twl4030.dtsi	Highlights:	2013-11-18 15:35:09 -08:00
twl6030_omap4.dtsi	ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file	2013-10-08 17:51:41 +02:00
twl6030.dtsi	ARM: dts: twl6030: Add PWM support	2013-04-09 00:16:50 +02:00
usb_a9g20_common.dtsi	ARM: at91: dt: add Calao USB-A9G20 low power version	2013-05-31 16:52:37 +02:00
usb_a9g20_lpw.dts	ARM: at91: dt: add Calao USB-A9G20 low power version	2013-05-31 16:52:37 +02:00
usb_a9g20-dab-mmx.dtsi	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
usb_a9g20.dts	ARM: at91: dt: add Calao USB-A9G20 low power version	2013-05-31 16:52:37 +02:00
usb_a9260_common.dtsi	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
usb_a9260.dts	ARM: at91: dt: usb-a9260: update shutdown controller	2013-05-31 16:52:35 +02:00
usb_a9263.dts	ARM: at91: dt: usb-a9263: add dataflash support	2013-05-31 16:52:36 +02:00
versatile-ab.dts	arm/versatile: Fix versatile irq specifications.	2013-10-28 16:50:11 -07:00
versatile-pb.dts	arm/versatile: Fix versatile irq specifications.	2013-10-28 16:50:11 -07:00
vexpress-v2m-rs1.dtsi
vexpress-v2m.dtsi
vexpress-v2p-ca5s.dts	ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms	2013-04-11 03:01:03 -07:00
vexpress-v2p-ca9.dts	ARM: dts: vexpress: disable CA9 core tile sp804 timer	2013-04-11 15:11:19 -05:00
vexpress-v2p-ca15_a7.dts	ARM: SoC late changes for v3.12	2013-09-09 16:35:29 -07:00
vexpress-v2p-ca15-tc1.dts	ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms	2013-04-11 03:01:03 -07:00
vf610-cosmic.dts	ARM: dts: add initial VF610 Cosmic/Cosmic+ board support	2013-09-26 13:01:38 +08:00
vf610-pinfunc.h	ARM: dts: add SoC level device tree source for VF610	2013-06-17 16:04:23 +08:00
vf610-twr.dts	ARM: dts: vf610-twr: Enable DSPI0 devices and Flash at26df081a	2013-09-26 13:01:33 +08:00
vf610.dtsi	ARM: dts: vf610: Add DSPI nodes	2013-09-26 13:01:33 +08:00
vt8500-bv07.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
vt8500.dtsi	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8505-ref.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8505.dtsi	dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files	2013-05-12 20:31:15 +12:00
wm8650-mid.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8650.dtsi	dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files	2013-05-12 20:31:15 +12:00
wm8750-apc8750.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8750.dtsi	dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files	2013-05-12 20:31:15 +12:00
wm8850-w70v2.dts	ARM: dts: Use the PWM polarity flags	2013-09-03 13:08:11 +02:00
wm8850.dtsi	dts: vt8500: Correct reference clock on WM8850 SoCs	2013-06-04 07:31:22 +12:00
xenvm-4.2.dts	xenvm: add a simple PSCI node and a second cpu	2013-04-25 16:46:09 +00:00
zynq-7000.dtsi	arm: zynq: Enable arm_global_timer	2013-10-02 11:34:28 +02:00
zynq-zc702.dts	arm: dt: zynq: Use 'status' property for UART nodes	2013-06-17 10:32:39 +02:00
zynq-zc706.dts	arm: dt: zynq: Add support for the zc706 platform	2013-06-17 10:32:51 +02:00
zynq-zed.dts	arm: dt: zynq: Add support for the zed platform	2013-06-17 10:33:03 +02:00