linux/arch/arm/mach-at91
Joachim Eastwood f19b797c08 ARM: at91: Export at91_pmc_base
After commit b55149529d (ARM: at91/PMC: make register base soc independent)
building atmel_usba_udc as a module fails with following message
  ERROR: "at91_pmc_base" [drivers/usb/gadget/atmel_usba_udc.ko] undefined!
  make[1]: *** [__modpost] Error 1
  make: *** [modules] Error 2

Export symbol to allow driver to be built as a module again.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:24 +02:00
..
include/mach ARM: fix __io macro for PCMCIA 2012-04-05 11:29:55 -07:00
at91rm9200_devices.c Merge branches 'depends/irqdomain' and 'at91/base2+cleanup' into next/dt 2012-03-02 13:22:19 +00:00
at91rm9200_time.c ARM: at91: Export at91_st_base 2012-04-16 11:08:23 +02:00
at91rm9200.c Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
at91sam9_alt_reset.S ARM: at91: make sdram/ddr register base soc independent 2012-02-23 14:57:56 +01:00
at91sam9g45_devices.c ARM: at91: fix check of valid GPIO for SPI and USB 2012-04-04 18:35:52 +02:00
at91sam9g45_reset.S ARM: at91: make sdram/ddr register base soc independent 2012-02-23 14:57:56 +01:00
at91sam9g45.c Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
at91sam9rl_devices.c ARM: at91: fix check of valid GPIO for SPI and USB 2012-04-04 18:35:52 +02:00
at91sam9rl.c Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
at91sam9x5.c ARM: at91/at91sam9x5: add clkdev entries for DMA controllers 2012-04-02 11:55:19 +02:00
at91sam926x_time.c ARM: at91/pit: add traces in case of error 2012-03-01 13:38:48 +01:00
at91sam9260_devices.c ARM: at91: fix check of valid GPIO for SPI and USB 2012-04-04 18:35:52 +02:00
at91sam9260.c Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
at91sam9261_devices.c ARM: at91: fix check of valid GPIO for SPI and USB 2012-04-04 18:35:52 +02:00
at91sam9261.c Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
at91sam9263_devices.c ARM: at91: fix check of valid GPIO for SPI and USB 2012-04-04 18:35:52 +02:00
at91sam9263.c Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
at91x40_time.c ARM: at91/at91x40: remove use of at91_sys_read/write 2012-02-17 17:54:05 +01:00
at91x40.c ARM: fix builds due to missing <asm/system_misc.h> includes 2012-03-30 15:44:40 -07:00
board-1arm.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-afeb-9260v1.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-cam60.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-carmeva.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-cpu9krea.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-cpuat91.c ARM: at91: make sdram/ddr register base soc independent 2012-02-23 14:57:56 +01:00
board-csb337.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-csb637.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-dt.c ARM: at91/dt: add specific DT soc init 2012-03-15 23:30:05 +08:00
board-eb01.c at91: fix map_io init usage 2011-05-25 23:04:34 +08:00
board-eb9200.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-ecbat91.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-eco920.c ARM: at91: make sdram/ddr register base soc independent 2012-02-23 14:57:56 +01:00
board-flexibity.c ARM: at91: Add external RTC for Flexibity board 2012-02-03 13:45:17 +01:00
board-foxg20.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-gsia18s.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-kafa.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-kb9202.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-neocore926.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-pcontrol-g20.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-picotux200.c ARM: at91: make sdram/ddr register base soc independent 2012-02-23 14:57:56 +01:00
board-qil-a9260.c ARM: at91: enable on flash bbt for Atmel Reference and DT boards 2012-03-15 23:27:25 +08:00
board-rm9200dk.c ARM: at91: enable on flash bbt for Atmel Reference and DT boards 2012-03-15 23:27:25 +08:00
board-rm9200ek.c ARM: at91: make sdram/ddr register base soc independent 2012-02-23 14:57:56 +01:00
board-rsi-ews.c ARM: at91/boards: use -EINVAL for invalid gpio 2011-11-29 15:46:14 +00:00
board-sam9-l9260.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-sam9g20ek.c ARM: at91: enable on flash bbt for Atmel Reference and DT boards 2012-03-15 23:27:25 +08:00
board-sam9m10g45ek.c ARM: at91/USB host: specify and handle properly vbus_pin_active_low 2012-04-04 18:35:14 +02:00
board-sam9rlek.c ARM: at91: enable on flash bbt for Atmel Reference and DT boards 2012-03-15 23:27:25 +08:00
board-sam9260ek.c ARM: at91: enable on flash bbt for Atmel Reference and DT boards 2012-03-15 23:27:25 +08:00
board-sam9261ek.c ARM: at91: enable on flash bbt for Atmel Reference and DT boards 2012-03-15 23:27:25 +08:00
board-sam9263ek.c ARM: at91/USB host: specify and handle properly vbus_pin_active_low 2012-04-04 18:35:14 +02:00
board-snapper9260.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-stamp9g20.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
board-usb-a926x.c ARM: at91: enable on flash bbt for Atmel Reference and DT boards 2012-03-15 23:27:25 +08:00
board-yl-9200.c ATMEL: fix nand ecc support 2012-03-15 23:26:32 +08:00
clock.c ARM: at91: Export at91_pmc_base 2012-04-16 11:08:24 +02:00
clock.h at91: switch to CLKDEV_LOOKUP 2011-05-25 23:04:34 +08:00
cpuidle.c Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux 2012-03-30 16:45:39 -07:00
generic.h ARM: at91: add pmc DT support 2012-03-15 23:31:14 +08:00
gpio.c ARM: at91/pio: add new PIO3 features 2012-03-01 13:38:50 +01:00
irq.c ARM: at91: AIC and GPIO IRQ device tree initialization 2012-03-01 13:29:03 +01:00
Kconfig ARM: at91: always enable sam9 restart 2012-03-15 23:31:18 +08:00
leds.c ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.h 2011-08-08 14:27:41 +01:00
Makefile ARM: at91: add sam9_smc.o to at91sam9x5 build 2012-03-01 13:38:49 +01:00
Makefile.boot ARM: at91: properly sort dtb files in Makefile.boot 2012-02-23 14:58:00 +01:00
pm_slowclock.S ARM: at91/PMC: make register base soc independent 2012-02-23 14:57:57 +01:00
pm.c ARM: at91: add ram controller DT support 2012-03-15 23:37:56 +08:00
pm.h ARM: at91: make sdram/ddr register base soc independent 2012-02-23 14:57:56 +01:00
sam9_smc.c ARM: at91: add accessor to manage SMC 2012-02-13 18:31:36 +01:00
sam9_smc.h ARM: at91: add accessor to manage SMC 2012-02-13 18:31:36 +01:00
setup.c ARM: at91: Export at91_ramc_base 2012-04-16 11:08:24 +02:00
soc.h ARM: at91: code removal of CAP9 SoC 2012-02-03 13:33:05 +01:00