leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f0cbd8bd87
linux/drivers/gpu/drm/nouveau/dispnv04/crtc.c
Ilia Mirkin 856718054a drm/nouveau/kms/nv04-nv4x: fix exposed format list 
drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality,
ARGB8888's 32-bit depth messes up some formulas that weren't meant for
it, and the alpha is fairly meaningless for the primary plane.

The modesetting logic appears to be fully prepared for RGB565 as well as
XRGB1555 however, as tested with modetest.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-08-22 18:04:35 +10:00

1173 lines
38 KiB
C
Raw Blame History

/*
* Copyright 1993-2003 NVIDIA, Corporation
* Copyright 2006 Dave Airlie
* Copyright 2007 Maarten Maathuis
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/pm_runtime.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_plane_helper.h>
#include "nouveau_drv.h"
#include "nouveau_reg.h"
#include "nouveau_ttm.h"
#include "nouveau_bo.h"
#include "nouveau_gem.h"
#include "nouveau_encoder.h"
#include "nouveau_connector.h"
#include "nouveau_crtc.h"
#include "hw.h"
#include "nvreg.h"
#include "nouveau_fbcon.h"
#include "disp.h"
#include <subdev/bios/pll.h>
#include <subdev/clk.h>
static int
nv04_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb);
static void
crtc_wr_cio_state(struct drm_crtc *crtc, struct nv04_crtc_reg *crtcstate, int index)
{
NVWriteVgaCrtc(crtc->dev, nouveau_crtc(crtc)->index, index,
crtcstate->CRTC[index]);
}
static void nv_crtc_set_digital_vibrance(struct drm_crtc *crtc, int level)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
regp->CRTC[NV_CIO_CRE_CSB] = nv_crtc->saturation = level;
if (nv_crtc->saturation && nv_gf4_disp_arch(crtc->dev)) {
regp->CRTC[NV_CIO_CRE_CSB] = 0x80;
regp->CRTC[NV_CIO_CRE_5B] = nv_crtc->saturation << 2;
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_5B);
}
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_CSB);
}
static void nv_crtc_set_image_sharpening(struct drm_crtc *crtc, int level)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
nv_crtc->sharpness = level;
if (level < 0) /* blur is in hw range 0x3f -> 0x20 */
level += 0x40;
regp->ramdac_634 = level;
NVWriteRAMDAC(crtc->dev, nv_crtc->index, NV_PRAMDAC_634, regp->ramdac_634);
}
#define PLLSEL_VPLL1_MASK \
(NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_VPLL \
| NV_PRAMDAC_PLL_COEFF_SELECT_VCLK_RATIO_DB2)
#define PLLSEL_VPLL2_MASK \
(NV_PRAMDAC_PLL_COEFF_SELECT_PLL_SOURCE_VPLL2 \
| NV_PRAMDAC_PLL_COEFF_SELECT_VCLK2_RATIO_DB2)
#define PLLSEL_TV_MASK \
(NV_PRAMDAC_PLL_COEFF_SELECT_TV_VSCLK1 \
| NV_PRAMDAC_PLL_COEFF_SELECT_TV_PCLK1 \
| NV_PRAMDAC_PLL_COEFF_SELECT_TV_VSCLK2 \
| NV_PRAMDAC_PLL_COEFF_SELECT_TV_PCLK2)
/* NV4x 0x40.. pll notes:
* gpu pll: 0x4000 + 0x4004
* ?gpu? pll: 0x4008 + 0x400c
* vpll1: 0x4010 + 0x4014
* vpll2: 0x4018 + 0x401c
* mpll: 0x4020 + 0x4024
* mpll: 0x4038 + 0x403c
*
* the first register of each pair has some unknown details:
* bits 0-7: redirected values from elsewhere? (similar to PLL_SETUP_CONTROL?)
* bits 20-23: (mpll) something to do with post divider?
* bits 28-31: related to single stage mode? (bit 8/12)
*/
static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mode * mode, int dot_clock)
{
struct drm_device *dev = crtc->dev;
struct nouveau_drm *drm = nouveau_drm(dev);
struct nvkm_bios *bios = nvxx_bios(&drm->client.device);
struct nvkm_clk *clk = nvxx_clk(&drm->client.device);
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
struct nv04_crtc_reg *regp = &state->crtc_reg[nv_crtc->index];
struct nvkm_pll_vals *pv = &regp->pllvals;
struct nvbios_pll pll_lim;
if (nvbios_pll_parse(bios, nv_crtc->index ? PLL_VPLL1 : PLL_VPLL0,
&pll_lim))
return;
/* NM2 == 0 is used to determine single stage mode on two stage plls */
pv->NM2 = 0;
/* for newer nv4x the blob uses only the first stage of the vpll below a
* certain clock. for a certain nv4b this is 150MHz. since the max
* output frequency of the first stage for this card is 300MHz, it is
* assumed the threshold is given by vco1 maxfreq/2
*/
/* for early nv4x, specifically nv40 and *some* nv43 (devids 0 and 6,
* not 8, others unknown), the blob always uses both plls. no problem
* has yet been observed in allowing the use a single stage pll on all
* nv43 however. the behaviour of single stage use is untested on nv40
*/
if (drm->client.device.info.chipset > 0x40 && dot_clock <= (pll_lim.vco1.max_freq / 2))
memset(&pll_lim.vco2, 0, sizeof(pll_lim.vco2));
if (!clk->pll_calc(clk, &pll_lim, dot_clock, pv))
return;
state->pllsel &= PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK;
/* The blob uses this always, so let's do the same */
if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_USE_VPLL2_TRUE;
/* again nv40 and some nv43 act more like nv3x as described above */
if (drm->client.device.info.chipset < 0x41)
state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_MPLL |
NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_NVPLL;
state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK;
if (pv->NM2)
NV_DEBUG(drm, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n",
pv->N1, pv->N2, pv->M1, pv->M2, pv->log2P);
else
NV_DEBUG(drm, "vpll: n %d m %d log2p %d\n",
pv->N1, pv->M1, pv->log2P);
nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset);
}
static void
nv_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct nouveau_drm *drm = nouveau_drm(dev);
unsigned char seq1 = 0, crtc17 = 0;
unsigned char crtc1A;
NV_DEBUG(drm, "Setting dpms mode %d on CRTC %d\n", mode,
nv_crtc->index);
if (nv_crtc->last_dpms == mode) /* Don't do unnecessary mode changes. */
return;
nv_crtc->last_dpms = mode;
if (nv_two_heads(dev))
NVSetOwner(dev, nv_crtc->index);
/* nv4ref indicates these two RPC1 bits inhibit h/v sync */
crtc1A = NVReadVgaCrtc(dev, nv_crtc->index,
NV_CIO_CRE_RPC1_INDEX) & ~0xC0;
switch (mode) {
case DRM_MODE_DPMS_STANDBY:
/* Screen: Off; HSync: Off, VSync: On -- Not Supported */
seq1 = 0x20;
crtc17 = 0x80;
crtc1A |= 0x80;
break;
case DRM_MODE_DPMS_SUSPEND:
/* Screen: Off; HSync: On, VSync: Off -- Not Supported */
seq1 = 0x20;
crtc17 = 0x80;
crtc1A |= 0x40;
break;
case DRM_MODE_DPMS_OFF:
/* Screen: Off; HSync: Off, VSync: Off */
seq1 = 0x20;
crtc17 = 0x00;
crtc1A |= 0xC0;
break;
case DRM_MODE_DPMS_ON:
default:
/* Screen: On; HSync: On, VSync: On */
seq1 = 0x00;
crtc17 = 0x80;
break;
}
NVVgaSeqReset(dev, nv_crtc->index, true);
/* Each head has it's own sequencer, so we can turn it off when we want */
seq1 |= (NVReadVgaSeq(dev, nv_crtc->index, NV_VIO_SR_CLOCK_INDEX) & ~0x20);
NVWriteVgaSeq(dev, nv_crtc->index, NV_VIO_SR_CLOCK_INDEX, seq1);
crtc17 |= (NVReadVgaCrtc(dev, nv_crtc->index, NV_CIO_CR_MODE_INDEX) & ~0x80);
mdelay(10);
NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CR_MODE_INDEX, crtc17);
NVVgaSeqReset(dev, nv_crtc->index, false);
NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RPC1_INDEX, crtc1A);
}
static void
nv_crtc_mode_set_vga(struct drm_crtc *crtc, struct drm_display_mode *mode)
{
struct drm_device *dev = crtc->dev;
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
struct drm_framebuffer *fb = crtc->primary->fb;
/* Calculate our timings */
int horizDisplay = (mode->crtc_hdisplay >> 3) - 1;
int horizStart = (mode->crtc_hsync_start >> 3) + 1;
int horizEnd = (mode->crtc_hsync_end >> 3) + 1;
int horizTotal = (mode->crtc_htotal >> 3) - 5;
int horizBlankStart = (mode->crtc_hdisplay >> 3) - 1;
int horizBlankEnd = (mode->crtc_htotal >> 3) - 1;
int vertDisplay = mode->crtc_vdisplay - 1;
int vertStart = mode->crtc_vsync_start - 1;
int vertEnd = mode->crtc_vsync_end - 1;
int vertTotal = mode->crtc_vtotal - 2;
int vertBlankStart = mode->crtc_vdisplay - 1;
int vertBlankEnd = mode->crtc_vtotal - 1;
struct drm_encoder *encoder;
bool fp_output = false;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
if (encoder->crtc == crtc &&
(nv_encoder->dcb->type == DCB_OUTPUT_LVDS ||
nv_encoder->dcb->type == DCB_OUTPUT_TMDS))
fp_output = true;
}
if (fp_output) {
vertStart = vertTotal - 3;
vertEnd = vertTotal - 2;
vertBlankStart = vertStart;
horizStart = horizTotal - 5;
horizEnd = horizTotal - 2;
horizBlankEnd = horizTotal + 4;
#if 0
if (dev->overlayAdaptor && drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
/* This reportedly works around some video overlay bandwidth problems */
horizTotal += 2;
#endif
}
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
vertTotal |= 1;
#if 0
ErrorF("horizDisplay: 0x%X \n", horizDisplay);
ErrorF("horizStart: 0x%X \n", horizStart);
ErrorF("horizEnd: 0x%X \n", horizEnd);
ErrorF("horizTotal: 0x%X \n", horizTotal);
ErrorF("horizBlankStart: 0x%X \n", horizBlankStart);
ErrorF("horizBlankEnd: 0x%X \n", horizBlankEnd);
ErrorF("vertDisplay: 0x%X \n", vertDisplay);
ErrorF("vertStart: 0x%X \n", vertStart);
ErrorF("vertEnd: 0x%X \n", vertEnd);
ErrorF("vertTotal: 0x%X \n", vertTotal);
ErrorF("vertBlankStart: 0x%X \n", vertBlankStart);
ErrorF("vertBlankEnd: 0x%X \n", vertBlankEnd);
#endif
/*
* compute correct Hsync & Vsync polarity
*/
if ((mode->flags & (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC))
&& (mode->flags & (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) {
regp->MiscOutReg = 0x23;
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
regp->MiscOutReg |= 0x40;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
regp->MiscOutReg |= 0x80;
} else {
int vdisplay = mode->vdisplay;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
vdisplay *= 2;
if (mode->vscan > 1)
vdisplay *= mode->vscan;
if (vdisplay < 400)
regp->MiscOutReg = 0xA3; /* +hsync -vsync */
else if (vdisplay < 480)
regp->MiscOutReg = 0x63; /* -hsync +vsync */
else if (vdisplay < 768)
regp->MiscOutReg = 0xE3; /* -hsync -vsync */
else
regp->MiscOutReg = 0x23; /* +hsync +vsync */
}
/*
* Time Sequencer
*/
regp->Sequencer[NV_VIO_SR_RESET_INDEX] = 0x00;
/* 0x20 disables the sequencer */
if (mode->flags & DRM_MODE_FLAG_CLKDIV2)
regp->Sequencer[NV_VIO_SR_CLOCK_INDEX] = 0x29;
else
regp->Sequencer[NV_VIO_SR_CLOCK_INDEX] = 0x21;
regp->Sequencer[NV_VIO_SR_PLANE_MASK_INDEX] = 0x0F;
regp->Sequencer[NV_VIO_SR_CHAR_MAP_INDEX] = 0x00;
regp->Sequencer[NV_VIO_SR_MEM_MODE_INDEX] = 0x0E;
/*
* CRTC
*/
regp->CRTC[NV_CIO_CR_HDT_INDEX] = horizTotal;
regp->CRTC[NV_CIO_CR_HDE_INDEX] = horizDisplay;
regp->CRTC[NV_CIO_CR_HBS_INDEX] = horizBlankStart;
regp->CRTC[NV_CIO_CR_HBE_INDEX] = (1 << 7) |
XLATE(horizBlankEnd, 0, NV_CIO_CR_HBE_4_0);
regp->CRTC[NV_CIO_CR_HRS_INDEX] = horizStart;
regp->CRTC[NV_CIO_CR_HRE_INDEX] = XLATE(horizBlankEnd, 5, NV_CIO_CR_HRE_HBE_5) |
XLATE(horizEnd, 0, NV_CIO_CR_HRE_4_0);
regp->CRTC[NV_CIO_CR_VDT_INDEX] = vertTotal;
regp->CRTC[NV_CIO_CR_OVL_INDEX] = XLATE(vertStart, 9, NV_CIO_CR_OVL_VRS_9) |
XLATE(vertDisplay, 9, NV_CIO_CR_OVL_VDE_9) |
XLATE(vertTotal, 9, NV_CIO_CR_OVL_VDT_9) |
(1 << 4) |
XLATE(vertBlankStart, 8, NV_CIO_CR_OVL_VBS_8) |
XLATE(vertStart, 8, NV_CIO_CR_OVL_VRS_8) |
XLATE(vertDisplay, 8, NV_CIO_CR_OVL_VDE_8) |
XLATE(vertTotal, 8, NV_CIO_CR_OVL_VDT_8);
regp->CRTC[NV_CIO_CR_RSAL_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_CELL_HT_INDEX] = ((mode->flags & DRM_MODE_FLAG_DBLSCAN) ? MASK(NV_CIO_CR_CELL_HT_SCANDBL) : 0) |
1 << 6 |
XLATE(vertBlankStart, 9, NV_CIO_CR_CELL_HT_VBS_9);
regp->CRTC[NV_CIO_CR_CURS_ST_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_CURS_END_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_SA_HI_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_SA_LO_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_TCOFF_HI_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_TCOFF_LO_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_VRS_INDEX] = vertStart;
regp->CRTC[NV_CIO_CR_VRE_INDEX] = 1 << 5 | XLATE(vertEnd, 0, NV_CIO_CR_VRE_3_0);
regp->CRTC[NV_CIO_CR_VDE_INDEX] = vertDisplay;
/* framebuffer can be larger than crtc scanout area. */
regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = fb->pitches[0] / 8;
regp->CRTC[NV_CIO_CR_ULINE_INDEX] = 0x00;
regp->CRTC[NV_CIO_CR_VBS_INDEX] = vertBlankStart;
regp->CRTC[NV_CIO_CR_VBE_INDEX] = vertBlankEnd;
regp->CRTC[NV_CIO_CR_MODE_INDEX] = 0x43;
regp->CRTC[NV_CIO_CR_LCOMP_INDEX] = 0xff;
/*
* Some extended CRTC registers (they are not saved with the rest of the vga regs).
*/
/* framebuffer can be larger than crtc scanout area. */
regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
XLATE(fb->pitches[0] / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
regp->CRTC[NV_CIO_CRE_42] =
XLATE(fb->pitches[0] / 8, 11, NV_CIO_CRE_42_OFFSET_11);
regp->CRTC[NV_CIO_CRE_RPC1_INDEX] = mode->crtc_hdisplay < 1280 ?
MASK(NV_CIO_CRE_RPC1_LARGE) : 0x00;
regp->CRTC[NV_CIO_CRE_LSR_INDEX] = XLATE(horizBlankEnd, 6, NV_CIO_CRE_LSR_HBE_6) |
XLATE(vertBlankStart, 10, NV_CIO_CRE_LSR_VBS_10) |
XLATE(vertStart, 10, NV_CIO_CRE_LSR_VRS_10) |
XLATE(vertDisplay, 10, NV_CIO_CRE_LSR_VDE_10) |
XLATE(vertTotal, 10, NV_CIO_CRE_LSR_VDT_10);
regp->CRTC[NV_CIO_CRE_HEB__INDEX] = XLATE(horizStart, 8, NV_CIO_CRE_HEB_HRS_8) |
XLATE(horizBlankStart, 8, NV_CIO_CRE_HEB_HBS_8) |
XLATE(horizDisplay, 8, NV_CIO_CRE_HEB_HDE_8) |
XLATE(horizTotal, 8, NV_CIO_CRE_HEB_HDT_8);
regp->CRTC[NV_CIO_CRE_EBR_INDEX] = XLATE(vertBlankStart, 11, NV_CIO_CRE_EBR_VBS_11) |
XLATE(vertStart, 11, NV_CIO_CRE_EBR_VRS_11) |
XLATE(vertDisplay, 11, NV_CIO_CRE_EBR_VDE_11) |
XLATE(vertTotal, 11, NV_CIO_CRE_EBR_VDT_11);
if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
horizTotal = (horizTotal >> 1) & ~1;
regp->CRTC[NV_CIO_CRE_ILACE__INDEX] = horizTotal;
regp->CRTC[NV_CIO_CRE_HEB__INDEX] |= XLATE(horizTotal, 8, NV_CIO_CRE_HEB_ILC_8);
} else
regp->CRTC[NV_CIO_CRE_ILACE__INDEX] = 0xff; /* interlace off */
/*
* Graphics Display Controller
*/
regp->Graphics[NV_VIO_GX_SR_INDEX] = 0x00;
regp->Graphics[NV_VIO_GX_SREN_INDEX] = 0x00;
regp->Graphics[NV_VIO_GX_CCOMP_INDEX] = 0x00;
regp->Graphics[NV_VIO_GX_ROP_INDEX] = 0x00;
regp->Graphics[NV_VIO_GX_READ_MAP_INDEX] = 0x00;
regp->Graphics[NV_VIO_GX_MODE_INDEX] = 0x40; /* 256 color mode */
regp->Graphics[NV_VIO_GX_MISC_INDEX] = 0x05; /* map 64k mem + graphic mode */
regp->Graphics[NV_VIO_GX_DONT_CARE_INDEX] = 0x0F;
regp->Graphics[NV_VIO_GX_BIT_MASK_INDEX] = 0xFF;
regp->Attribute[0] = 0x00; /* standard colormap translation */
regp->Attribute[1] = 0x01;
regp->Attribute[2] = 0x02;
regp->Attribute[3] = 0x03;
regp->Attribute[4] = 0x04;
regp->Attribute[5] = 0x05;
regp->Attribute[6] = 0x06;
regp->Attribute[7] = 0x07;
regp->Attribute[8] = 0x08;
regp->Attribute[9] = 0x09;
regp->Attribute[10] = 0x0A;
regp->Attribute[11] = 0x0B;
regp->Attribute[12] = 0x0C;
regp->Attribute[13] = 0x0D;
regp->Attribute[14] = 0x0E;
regp->Attribute[15] = 0x0F;
regp->Attribute[NV_CIO_AR_MODE_INDEX] = 0x01; /* Enable graphic mode */
/* Non-vga */
regp->Attribute[NV_CIO_AR_OSCAN_INDEX] = 0x00;
regp->Attribute[NV_CIO_AR_PLANE_INDEX] = 0x0F; /* enable all color planes */
regp->Attribute[NV_CIO_AR_HPP_INDEX] = 0x00;
regp->Attribute[NV_CIO_AR_CSEL_INDEX] = 0x00;
}
/**
* Sets up registers for the given mode/adjusted_mode pair.
*
* The clocks, CRTCs and outputs attached to this CRTC must be off.
*
* This shouldn't enable any clocks, CRTCs, or outputs, but they should
* be easily turned on/off after this.
*/
static void
nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode)
{
struct drm_device *dev = crtc->dev;
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
struct nv04_crtc_reg *savep = &nv04_display(dev)->saved_reg.crtc_reg[nv_crtc->index];
const struct drm_framebuffer *fb = crtc->primary->fb;
struct drm_encoder *encoder;
bool lvds_output = false, tmds_output = false, tv_output = false,
off_chip_digital = false;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
bool digital = false;
if (encoder->crtc != crtc)
continue;
if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS)
digital = lvds_output = true;
if (nv_encoder->dcb->type == DCB_OUTPUT_TV)
tv_output = true;
if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS)
digital = tmds_output = true;
if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP && digital)
off_chip_digital = true;
}
/* Registers not directly related to the (s)vga mode */
/* What is the meaning of this register? */
/* A few popular values are 0x18, 0x1c, 0x38, 0x3c */
regp->CRTC[NV_CIO_CRE_ENH_INDEX] = savep->CRTC[NV_CIO_CRE_ENH_INDEX] & ~(1<<5);
regp->crtc_eng_ctrl = 0;
/* Except for rare conditions I2C is enabled on the primary crtc */
if (nv_crtc->index == 0)
regp->crtc_eng_ctrl |= NV_CRTC_FSEL_I2C;
#if 0
/* Set overlay to desired crtc. */
if (dev->overlayAdaptor) {
NVPortPrivPtr pPriv = GET_OVERLAY_PRIVATE(dev);
if (pPriv->overlayCRTC == nv_crtc->index)
regp->crtc_eng_ctrl |= NV_CRTC_FSEL_OVERLAY;
}
#endif
/* ADDRESS_SPACE_PNVM is the same as setting HCUR_ASI */
regp->cursor_cfg = NV_PCRTC_CURSOR_CONFIG_CUR_LINES_64 |
NV_PCRTC_CURSOR_CONFIG_CUR_PIXELS_64 |
NV_PCRTC_CURSOR_CONFIG_ADDRESS_SPACE_PNVM;
if (drm->client.device.info.chipset >= 0x11)
regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_CUR_BPP_32;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_DOUBLE_SCAN_ENABLE;
/* Unblock some timings */
regp->CRTC[NV_CIO_CRE_53] = 0;
regp->CRTC[NV_CIO_CRE_54] = 0;
/* 0x00 is disabled, 0x11 is lvds, 0x22 crt and 0x88 tmds */
if (lvds_output)
regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x11;
else if (tmds_output)
regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x88;
else
regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x22;
/* These values seem to vary */
/* This register seems to be used by the bios to make certain decisions on some G70 cards? */
regp->CRTC[NV_CIO_CRE_SCRATCH4__INDEX] = savep->CRTC[NV_CIO_CRE_SCRATCH4__INDEX];
nv_crtc_set_digital_vibrance(crtc, nv_crtc->saturation);
/* probably a scratch reg, but kept for cargo-cult purposes:
* bit0: crtc0?, head A
* bit6: lvds, head A
* bit7: (only in X), head A
*/
if (nv_crtc->index == 0)
regp->CRTC[NV_CIO_CRE_4B] = savep->CRTC[NV_CIO_CRE_4B] | 0x80;
/* The blob seems to take the current value from crtc 0, add 4 to that
* and reuse the old value for crtc 1 */
regp->CRTC[NV_CIO_CRE_TVOUT_LATENCY] = nv04_display(dev)->saved_reg.crtc_reg[0].CRTC[NV_CIO_CRE_TVOUT_LATENCY];
if (!nv_crtc->index)
regp->CRTC[NV_CIO_CRE_TVOUT_LATENCY] += 4;
/* the blob sometimes sets |= 0x10 (which is the same as setting |=
* 1 << 30 on 0x60.830), for no apparent reason */
regp->CRTC[NV_CIO_CRE_59] = off_chip_digital;
if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
regp->CRTC[0x9f] = off_chip_digital ? 0x11 : 0x1;
regp->crtc_830 = mode->crtc_vdisplay - 3;
regp->crtc_834 = mode->crtc_vdisplay - 1;
if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
/* This is what the blob does */
regp->crtc_850 = NVReadCRTC(dev, 0, NV_PCRTC_850);
if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
regp->gpio_ext = NVReadCRTC(dev, 0, NV_PCRTC_GPIO_EXT);
if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
regp->crtc_cfg = NV10_PCRTC_CONFIG_START_ADDRESS_HSYNC;
else
regp->crtc_cfg = NV04_PCRTC_CONFIG_START_ADDRESS_HSYNC;
/* Some misc regs */
if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) {
regp->CRTC[NV_CIO_CRE_85] = 0xFF;
regp->CRTC[NV_CIO_CRE_86] = 0x1;
}
regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] = (fb->format->depth + 1) / 8;
/* Enable slaved mode (called MODE_TV in nv4ref.h) */
if (lvds_output || tmds_output || tv_output)
regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] |= (1 << 7);
/* Generic PRAMDAC regs */
if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
/* Only bit that bios and blob set. */
regp->nv10_cursync = (1 << 25);
regp->ramdac_gen_ctrl = NV_PRAMDAC_GENERAL_CONTROL_BPC_8BITS |
NV_PRAMDAC_GENERAL_CONTROL_VGA_STATE_SEL |
NV_PRAMDAC_GENERAL_CONTROL_PIXMIX_ON;
if (fb->format->depth == 16)
regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL;
if (drm->client.device.info.chipset >= 0x11)
regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_PIPE_LONG;
regp->ramdac_630 = 0; /* turn off green mode (tv test pattern?) */
regp->tv_setup = 0;
nv_crtc_set_image_sharpening(crtc, nv_crtc->sharpness);
/* Some values the blob sets */
regp->ramdac_8c0 = 0x100;
regp->ramdac_a20 = 0x0;
regp->ramdac_a24 = 0xfffff;
regp->ramdac_a34 = 0x1;
}
static int
nv_crtc_swap_fbs(struct drm_crtc *crtc, struct drm_framebuffer *old_fb)
{
struct nv04_display *disp = nv04_display(crtc->dev);
struct nouveau_framebuffer *nvfb = nouveau_framebuffer(crtc->primary->fb);
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
int ret;
ret = nouveau_bo_pin(nvfb->nvbo, TTM_PL_FLAG_VRAM, false);
if (ret == 0) {
if (disp->image[nv_crtc->index])
nouveau_bo_unpin(disp->image[nv_crtc->index]);
nouveau_bo_ref(nvfb->nvbo, &disp->image[nv_crtc->index]);
}
return ret;
}
/**
* Sets up registers for the given mode/adjusted_mode pair.
*
* The clocks, CRTCs and outputs attached to this CRTC must be off.
*
* This shouldn't enable any clocks, CRTCs, or outputs, but they should
* be easily turned on/off after this.
*/
static int
nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y, struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct nouveau_drm *drm = nouveau_drm(dev);
int ret;
NV_DEBUG(drm, "CTRC mode on CRTC %d:\n", nv_crtc->index);
drm_mode_debug_printmodeline(adjusted_mode);
ret = nv_crtc_swap_fbs(crtc, old_fb);
if (ret)
return ret;
/* unlock must come after turning off FP_TG_CONTROL in output_prepare */
nv_lock_vga_crtc_shadow(dev, nv_crtc->index, -1);
nv_crtc_mode_set_vga(crtc, adjusted_mode);
/* calculated in nv04_dfp_prepare, nv40 needs it written before calculating PLLs */
if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, nv04_display(dev)->mode_reg.sel_clk);
nv_crtc_mode_set_regs(crtc, adjusted_mode);
nv_crtc_calc_state_ext(crtc, mode, adjusted_mode->clock);
return 0;
}
static void nv_crtc_save(struct drm_crtc *crtc)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
struct nv04_crtc_reg *crtc_state = &state->crtc_reg[nv_crtc->index];
struct nv04_mode_state *saved = &nv04_display(dev)->saved_reg;
struct nv04_crtc_reg *crtc_saved = &saved->crtc_reg[nv_crtc->index];
if (nv_two_heads(crtc->dev))
NVSetOwner(crtc->dev, nv_crtc->index);
nouveau_hw_save_state(crtc->dev, nv_crtc->index, saved);
/* init some state to saved value */
state->sel_clk = saved->sel_clk & ~(0x5 << 16);
crtc_state->CRTC[NV_CIO_CRE_LCD__INDEX] = crtc_saved->CRTC[NV_CIO_CRE_LCD__INDEX];
state->pllsel = saved->pllsel & ~(PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK);
crtc_state->gpio_ext = crtc_saved->gpio_ext;
}
static void nv_crtc_restore(struct drm_crtc *crtc)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
int head = nv_crtc->index;
uint8_t saved_cr21 = nv04_display(dev)->saved_reg.crtc_reg[head].CRTC[NV_CIO_CRE_21];
if (nv_two_heads(crtc->dev))
NVSetOwner(crtc->dev, head);
nouveau_hw_load_state(crtc->dev, head, &nv04_display(dev)->saved_reg);
nv_lock_vga_crtc_shadow(crtc->dev, head, saved_cr21);
nv_crtc->last_dpms = NV_DPMS_CLEARED;
}
static void nv_crtc_prepare(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
const struct drm_crtc_helper_funcs *funcs = crtc->helper_private;
if (nv_two_heads(dev))
NVSetOwner(dev, nv_crtc->index);
drm_crtc_vblank_off(crtc);
funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
NVBlankScreen(dev, nv_crtc->index, true);
/* Some more preparation. */
NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA);
if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) {
uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900);
NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900, reg900 & ~0x10000);
}
}
static void nv_crtc_commit(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
const struct drm_crtc_helper_funcs *funcs = crtc->helper_private;
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
nouveau_hw_load_state(dev, nv_crtc->index, &nv04_display(dev)->mode_reg);
nv04_crtc_mode_set_base(crtc, crtc->x, crtc->y, NULL);
#ifdef __BIG_ENDIAN
/* turn on LFB swapping */
{
uint8_t tmp = NVReadVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RCR);
tmp |= MASK(NV_CIO_CRE_RCR_ENDIAN_BIG);
NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RCR, tmp);
}
#endif
funcs->dpms(crtc, DRM_MODE_DPMS_ON);
drm_crtc_vblank_on(crtc);
}
static void nv_crtc_destroy(struct drm_crtc *crtc)
{
struct nv04_display *disp = nv04_display(crtc->dev);
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
if (!nv_crtc)
return;
drm_crtc_cleanup(crtc);
if (disp->image[nv_crtc->index])
nouveau_bo_unpin(disp->image[nv_crtc->index]);
nouveau_bo_ref(NULL, &disp->image[nv_crtc->index]);
nouveau_bo_unmap(nv_crtc->cursor.nvbo);
nouveau_bo_unpin(nv_crtc->cursor.nvbo);
nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo);
kfree(nv_crtc);
}
static void
nv_crtc_gamma_load(struct drm_crtc *crtc)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = nv_crtc->base.dev;
struct rgb { uint8_t r, g, b; } __attribute__((packed)) *rgbs;
u16 *r, *g, *b;
int i;
rgbs = (struct rgb *)nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index].DAC;
r = crtc->gamma_store;
g = r + crtc->gamma_size;
b = g + crtc->gamma_size;
for (i = 0; i < 256; i++) {
rgbs[i].r = *r++ >> 8;
rgbs[i].g = *g++ >> 8;
rgbs[i].b = *b++ >> 8;
}
nouveau_hw_load_state_palette(dev, nv_crtc->index, &nv04_display(dev)->mode_reg);
}
static void
nv_crtc_disable(struct drm_crtc *crtc)
{
struct nv04_display *disp = nv04_display(crtc->dev);
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
if (disp->image[nv_crtc->index])
nouveau_bo_unpin(disp->image[nv_crtc->index]);
nouveau_bo_ref(NULL, &disp->image[nv_crtc->index]);
}
static int
nv_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
uint32_t size,
struct drm_modeset_acquire_ctx *ctx)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
/* We need to know the depth before we upload, but it's possible to
* get called before a framebuffer is bound. If this is the case,
* mark the lut values as dirty by setting depth==0, and it'll be
* uploaded on the first mode_set_base()
*/
if (!nv_crtc->base.primary->fb) {
nv_crtc->lut.depth = 0;
return 0;
}
nv_crtc_gamma_load(crtc);
return 0;
}
static int
nv04_crtc_do_mode_set_base(struct drm_crtc *crtc,
struct drm_framebuffer *passed_fb,
int x, int y, bool atomic)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct nouveau_drm *drm = nouveau_drm(dev);
struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
struct drm_framebuffer *drm_fb;
struct nouveau_framebuffer *fb;
int arb_burst, arb_lwm;
NV_DEBUG(drm, "index %d\n", nv_crtc->index);
/* no fb bound */
if (!atomic && !crtc->primary->fb) {
NV_DEBUG(drm, "No FB bound\n");
return 0;
}
/* If atomic, we want to switch to the fb we were passed, so
* now we update pointers to do that.
*/
if (atomic) {
drm_fb = passed_fb;
fb = nouveau_framebuffer(passed_fb);
} else {
drm_fb = crtc->primary->fb;
fb = nouveau_framebuffer(crtc->primary->fb);
}
nv_crtc->fb.offset = fb->nvbo->bo.offset;
if (nv_crtc->lut.depth != drm_fb->format->depth) {
nv_crtc->lut.depth = drm_fb->format->depth;
nv_crtc_gamma_load(crtc);
}
/* Update the framebuffer format. */
regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] &= ~3;
regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] |= (drm_fb->format->depth + 1) / 8;
regp->ramdac_gen_ctrl &= ~NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL;
if (drm_fb->format->depth == 16)
regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL;
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_PIXEL_INDEX);
NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_GENERAL_CONTROL,
regp->ramdac_gen_ctrl);
regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = drm_fb->pitches[0] >> 3;
regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
XLATE(drm_fb->pitches[0] >> 3, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
regp->CRTC[NV_CIO_CRE_42] =
XLATE(drm_fb->pitches[0] / 8, 11, NV_CIO_CRE_42_OFFSET_11);
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_RPC0_INDEX);
crtc_wr_cio_state(crtc, regp, NV_CIO_CR_OFFSET_INDEX);
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_42);
/* Update the framebuffer location. */
regp->fb_start = nv_crtc->fb.offset & ~3;
regp->fb_start += (y * drm_fb->pitches[0]) + (x * drm_fb->format->cpp[0]);
nv_set_crtc_base(dev, nv_crtc->index, regp->fb_start);
/* Update the arbitration parameters. */
nouveau_calc_arb(dev, crtc->mode.clock, drm_fb->format->cpp[0] * 8,
&arb_burst, &arb_lwm);
regp->CRTC[NV_CIO_CRE_FF_INDEX] = arb_burst;
regp->CRTC[NV_CIO_CRE_FFLWM__INDEX] = arb_lwm & 0xff;
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FF_INDEX);
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FFLWM__INDEX);
if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_KELVIN) {
regp->CRTC[NV_CIO_CRE_47] = arb_lwm >> 8;
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_47);
}
return 0;
}
static int
nv04_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
int ret = nv_crtc_swap_fbs(crtc, old_fb);
if (ret)
return ret;
return nv04_crtc_do_mode_set_base(crtc, old_fb, x, y, false);
}
static int
nv04_crtc_mode_set_base_atomic(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int x, int y, enum mode_set_atomic state)
{
struct nouveau_drm *drm = nouveau_drm(crtc->dev);
struct drm_device *dev = drm->dev;
if (state == ENTER_ATOMIC_MODE_SET)
nouveau_fbcon_accel_save_disable(dev);
else
nouveau_fbcon_accel_restore(dev);
return nv04_crtc_do_mode_set_base(crtc, fb, x, y, true);
}
static void nv04_cursor_upload(struct drm_device *dev, struct nouveau_bo *src,
struct nouveau_bo *dst)
{
int width = nv_cursor_width(dev);
uint32_t pixel;
int i, j;
for (i = 0; i < width; i++) {
for (j = 0; j < width; j++) {
pixel = nouveau_bo_rd32(src, i*64 + j);
nouveau_bo_wr16(dst, i*width + j, (pixel & 0x80000000) >> 16
| (pixel & 0xf80000) >> 9
| (pixel & 0xf800) >> 6
| (pixel & 0xf8) >> 3);
}
}
}
static void nv11_cursor_upload(struct drm_device *dev, struct nouveau_bo *src,
struct nouveau_bo *dst)
{
uint32_t pixel;
int alpha, i;
/* nv11+ supports premultiplied (PM), or non-premultiplied (NPM) alpha
* cursors (though NPM in combination with fp dithering may not work on
* nv11, from "nv" driver history)
* NPM mode needs NV_PCRTC_CURSOR_CONFIG_ALPHA_BLEND set and is what the
* blob uses, however we get given PM cursors so we use PM mode
*/
for (i = 0; i < 64 * 64; i++) {
pixel = nouveau_bo_rd32(src, i);
/* hw gets unhappy if alpha <= rgb values. for a PM image "less
* than" shouldn't happen; fix "equal to" case by adding one to
* alpha channel (slightly inaccurate, but so is attempting to
* get back to NPM images, due to limits of integer precision)
*/
alpha = pixel >> 24;
if (alpha > 0 && alpha < 255)
pixel = (pixel & 0x00ffffff) | ((alpha + 1) << 24);
#ifdef __BIG_ENDIAN
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->client.device.info.chipset == 0x11) {
pixel = ((pixel & 0x000000ff) << 24) |
((pixel & 0x0000ff00) << 8) |
((pixel & 0x00ff0000) >> 8) |
((pixel & 0xff000000) >> 24);
}
}
#endif
nouveau_bo_wr32(dst, i, pixel);
}
}
static int
nv04_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t buffer_handle, uint32_t width, uint32_t height)
{
struct nouveau_drm *drm = nouveau_drm(crtc->dev);
struct drm_device *dev = drm->dev;
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct nouveau_bo *cursor = NULL;
struct drm_gem_object *gem;
int ret = 0;
if (!buffer_handle) {
nv_crtc->cursor.hide(nv_crtc, true);
return 0;
}
if (width != 64 || height != 64)
return -EINVAL;
gem = drm_gem_object_lookup(file_priv, buffer_handle);
if (!gem)
return -ENOENT;
cursor = nouveau_gem_object(gem);
ret = nouveau_bo_map(cursor);
if (ret)
goto out;
if (drm->client.device.info.chipset >= 0x11)
nv11_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo);
else
nv04_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo);
nouveau_bo_unmap(cursor);
nv_crtc->cursor.offset = nv_crtc->cursor.nvbo->bo.offset;
nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset);
nv_crtc->cursor.show(nv_crtc, true);
out:
drm_gem_object_unreference_unlocked(gem);
return ret;
}
static int
nv04_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
nv_crtc->cursor.set_pos(nv_crtc, x, y);
return 0;
}
static int
nouveau_crtc_set_config(struct drm_mode_set *set,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_device *dev;
struct nouveau_drm *drm;
int ret;
struct drm_crtc *crtc;
bool active = false;
if (!set || !set->crtc)
return -EINVAL;
dev = set->crtc->dev;
/* get a pm reference here */
ret = pm_runtime_get_sync(dev->dev);
if (ret < 0 && ret != -EACCES)
return ret;
ret = drm_crtc_helper_set_config(set, ctx);
drm = nouveau_drm(dev);
/* if we get here with no crtcs active then we can drop a reference */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (crtc->enabled)
active = true;
}
pm_runtime_mark_last_busy(dev->dev);
/* if we have active crtcs and we don't have a power ref,
take the current one */
if (active && !drm->have_disp_power_ref) {
drm->have_disp_power_ref = true;
return ret;
}
/* if we have no active crtcs, then drop the power ref
we got before */
if (!active && drm->have_disp_power_ref) {
pm_runtime_put_autosuspend(dev->dev);
drm->have_disp_power_ref = false;
}
/* drop the power reference we got coming in here */
pm_runtime_put_autosuspend(dev->dev);
return ret;
}
static const struct drm_crtc_funcs nv04_crtc_funcs = {
.cursor_set = nv04_crtc_cursor_set,
.cursor_move = nv04_crtc_cursor_move,
.gamma_set = nv_crtc_gamma_set,
.set_config = nouveau_crtc_set_config,
.page_flip = nouveau_crtc_page_flip,
.destroy = nv_crtc_destroy,
};
static const struct drm_crtc_helper_funcs nv04_crtc_helper_funcs = {
.dpms = nv_crtc_dpms,
.prepare = nv_crtc_prepare,
.commit = nv_crtc_commit,
.mode_set = nv_crtc_mode_set,
.mode_set_base = nv04_crtc_mode_set_base,
.mode_set_base_atomic = nv04_crtc_mode_set_base_atomic,
.disable = nv_crtc_disable,
};
static const uint32_t modeset_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_RGB565,
DRM_FORMAT_XRGB1555,
};
static struct drm_plane *
create_primary_plane(struct drm_device *dev)
{
struct drm_plane *primary;
int ret;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (primary == NULL) {
DRM_DEBUG_KMS("Failed to allocate primary plane\n");
return NULL;
}
/* possible_crtc's will be filled in later by crtc_init */
ret = drm_universal_plane_init(dev, primary, 0,
&drm_primary_helper_funcs,
modeset_formats,
ARRAY_SIZE(modeset_formats), NULL,
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
kfree(primary);
primary = NULL;
}
return primary;
}
int
nv04_crtc_create(struct drm_device *dev, int crtc_num)
{
struct nouveau_crtc *nv_crtc;
int ret;
nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL);
if (!nv_crtc)
return -ENOMEM;
nv_crtc->lut.depth = 0;
nv_crtc->index = crtc_num;
nv_crtc->last_dpms = NV_DPMS_CLEARED;
nv_crtc->save = nv_crtc_save;
nv_crtc->restore = nv_crtc_restore;
drm_crtc_init_with_planes(dev, &nv_crtc->base,
create_primary_plane(dev), NULL,
&nv04_crtc_funcs, NULL);
drm_crtc_helper_add(&nv_crtc->base, &nv04_crtc_helper_funcs);
drm_mode_crtc_set_gamma_size(&nv_crtc->base, 256);
ret = nouveau_bo_new(&nouveau_drm(dev)->client, 64*64*4, 0x100,
TTM_PL_FLAG_VRAM, 0, 0x0000, NULL, NULL,
&nv_crtc->cursor.nvbo);
if (!ret) {
ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM, false);
if (!ret) {
ret = nouveau_bo_map(nv_crtc->cursor.nvbo);
if (ret)
nouveau_bo_unpin(nv_crtc->cursor.nvbo);
}
if (ret)
nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo);
}
nv04_cursor_init(nv_crtc);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink