forked from Minki/linux
e993e23605
This driver doesn't need to access I/O ports directly via inb()/outb() and friends. This patch abstracts such access by calling ioport_map() to enable the use of more typical ioread8()/iowrite8() I/O memory accessor calls. Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
467 lines
14 KiB
C
467 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* GPIO driver for the ACCES 104-DIO-48E series
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This driver supports the following ACCES devices: 104-DIO-48E and
|
|
* 104-DIO-24E.
|
|
*/
|
|
#include <linux/bitmap.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define DIO48E_EXTENT 16
|
|
#define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT)
|
|
|
|
static unsigned int base[MAX_NUM_DIO48E];
|
|
static unsigned int num_dio48e;
|
|
module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
|
|
MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
|
|
|
|
static unsigned int irq[MAX_NUM_DIO48E];
|
|
module_param_hw_array(irq, uint, irq, NULL, 0);
|
|
MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
|
|
|
|
/**
|
|
* struct dio48e_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @io_state: bit I/O state (whether bit is set to input or output)
|
|
* @out_state: output bits state
|
|
* @control: Control registers state
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @base: base port address of the GPIO device
|
|
* @irq_mask: I/O bits affected by interrupts
|
|
*/
|
|
struct dio48e_gpio {
|
|
struct gpio_chip chip;
|
|
unsigned char io_state[6];
|
|
unsigned char out_state[6];
|
|
unsigned char control[2];
|
|
raw_spinlock_t lock;
|
|
void __iomem *base;
|
|
unsigned char irq_mask;
|
|
};
|
|
|
|
static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
|
|
if (dio48egpio->io_state[port] & mask)
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
}
|
|
|
|
static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned int io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
void __iomem *const control_addr = dio48egpio->base + 3 + control_port * 4;
|
|
unsigned long flags;
|
|
unsigned int control;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
dio48egpio->io_state[io_port] |= 0xF0;
|
|
dio48egpio->control[control_port] |= BIT(3);
|
|
} else {
|
|
dio48egpio->io_state[io_port] |= 0x0F;
|
|
dio48egpio->control[control_port] |= BIT(0);
|
|
}
|
|
} else {
|
|
dio48egpio->io_state[io_port] |= 0xFF;
|
|
if (io_port == 0 || io_port == 3)
|
|
dio48egpio->control[control_port] |= BIT(4);
|
|
else
|
|
dio48egpio->control[control_port] |= BIT(1);
|
|
}
|
|
|
|
control = BIT(7) | dio48egpio->control[control_port];
|
|
iowrite8(control, control_addr);
|
|
control &= ~BIT(7);
|
|
iowrite8(control, control_addr);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned int io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
void __iomem *const control_addr = dio48egpio->base + 3 + control_port * 4;
|
|
const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port;
|
|
unsigned long flags;
|
|
unsigned int control;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
dio48egpio->io_state[io_port] &= 0x0F;
|
|
dio48egpio->control[control_port] &= ~BIT(3);
|
|
} else {
|
|
dio48egpio->io_state[io_port] &= 0xF0;
|
|
dio48egpio->control[control_port] &= ~BIT(0);
|
|
}
|
|
} else {
|
|
dio48egpio->io_state[io_port] &= 0x00;
|
|
if (io_port == 0 || io_port == 3)
|
|
dio48egpio->control[control_port] &= ~BIT(4);
|
|
else
|
|
dio48egpio->control[control_port] &= ~BIT(1);
|
|
}
|
|
|
|
if (value)
|
|
dio48egpio->out_state[io_port] |= mask;
|
|
else
|
|
dio48egpio->out_state[io_port] &= ~mask;
|
|
|
|
control = BIT(7) | dio48egpio->control[control_port];
|
|
iowrite8(control, control_addr);
|
|
|
|
iowrite8(dio48egpio->out_state[io_port], dio48egpio->base + out_port);
|
|
|
|
control &= ~BIT(7);
|
|
iowrite8(control, control_addr);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dio48e_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int in_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
unsigned int port_state;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* ensure that GPIO is set for input */
|
|
if (!(dio48egpio->io_state[port] & mask)) {
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
port_state = ioread8(dio48egpio->base + in_port);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return !!(port_state & mask);
|
|
}
|
|
|
|
static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
|
|
|
|
static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
unsigned long offset;
|
|
unsigned long gpio_mask;
|
|
void __iomem *port_addr;
|
|
unsigned long port_state;
|
|
|
|
/* clear bits array to a clean slate */
|
|
bitmap_zero(bits, chip->ngpio);
|
|
|
|
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
|
|
port_addr = dio48egpio->base + ports[offset / 8];
|
|
port_state = ioread8(port_addr) & gpio_mask;
|
|
|
|
bitmap_set_value8(bits, port_state, offset);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dio48e_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int out_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (value)
|
|
dio48egpio->out_state[port] |= mask;
|
|
else
|
|
dio48egpio->out_state[port] &= ~mask;
|
|
|
|
iowrite8(dio48egpio->out_state[port], dio48egpio->base + out_port);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static void dio48e_gpio_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
unsigned long offset;
|
|
unsigned long gpio_mask;
|
|
size_t index;
|
|
void __iomem *port_addr;
|
|
unsigned long bitmask;
|
|
unsigned long flags;
|
|
|
|
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
|
|
index = offset / 8;
|
|
port_addr = dio48egpio->base + ports[index];
|
|
|
|
bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* update output state data and set device gpio register */
|
|
dio48egpio->out_state[index] &= ~gpio_mask;
|
|
dio48egpio->out_state[index] |= bitmask;
|
|
iowrite8(dio48egpio->out_state[index], port_addr);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
}
|
|
|
|
static void dio48e_irq_ack(struct irq_data *data)
|
|
{
|
|
}
|
|
|
|
static void dio48e_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
unsigned long flags;
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (offset == 19)
|
|
dio48egpio->irq_mask &= ~BIT(0);
|
|
else
|
|
dio48egpio->irq_mask &= ~BIT(1);
|
|
|
|
if (!dio48egpio->irq_mask)
|
|
/* disable interrupts */
|
|
ioread8(dio48egpio->base + 0xB);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static void dio48e_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
unsigned long flags;
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (!dio48egpio->irq_mask) {
|
|
/* enable interrupts */
|
|
iowrite8(0x00, dio48egpio->base + 0xF);
|
|
iowrite8(0x00, dio48egpio->base + 0xB);
|
|
}
|
|
|
|
if (offset == 19)
|
|
dio48egpio->irq_mask |= BIT(0);
|
|
else
|
|
dio48egpio->irq_mask |= BIT(1);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static int dio48e_irq_set_type(struct irq_data *data, unsigned int flow_type)
|
|
{
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return -EINVAL;
|
|
|
|
if (flow_type != IRQ_TYPE_NONE && flow_type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip dio48e_irqchip = {
|
|
.name = "104-dio-48e",
|
|
.irq_ack = dio48e_irq_ack,
|
|
.irq_mask = dio48e_irq_mask,
|
|
.irq_unmask = dio48e_irq_unmask,
|
|
.irq_set_type = dio48e_irq_set_type
|
|
};
|
|
|
|
static irqreturn_t dio48e_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = dev_id;
|
|
struct gpio_chip *const chip = &dio48egpio->chip;
|
|
const unsigned long irq_mask = dio48egpio->irq_mask;
|
|
unsigned long gpio;
|
|
|
|
for_each_set_bit(gpio, &irq_mask, 2)
|
|
generic_handle_domain_irq(chip->irq.domain,
|
|
19 + gpio*24);
|
|
|
|
raw_spin_lock(&dio48egpio->lock);
|
|
|
|
iowrite8(0x00, dio48egpio->base + 0xF);
|
|
|
|
raw_spin_unlock(&dio48egpio->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define DIO48E_NGPIO 48
|
|
static const char *dio48e_names[DIO48E_NGPIO] = {
|
|
"PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2",
|
|
"PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5",
|
|
"PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0",
|
|
"PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3",
|
|
"PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6",
|
|
"PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1",
|
|
"PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4",
|
|
"PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7",
|
|
"PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2",
|
|
"PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5",
|
|
"PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0",
|
|
"PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3",
|
|
"PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6",
|
|
"PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1",
|
|
"PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4",
|
|
"PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7"
|
|
};
|
|
|
|
static int dio48e_irq_init_hw(struct gpio_chip *gc)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(gc);
|
|
|
|
/* Disable IRQ by default */
|
|
ioread8(dio48egpio->base + 0xB);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dio48e_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct dio48e_gpio *dio48egpio;
|
|
const char *const name = dev_name(dev);
|
|
struct gpio_irq_chip *girq;
|
|
int err;
|
|
|
|
dio48egpio = devm_kzalloc(dev, sizeof(*dio48egpio), GFP_KERNEL);
|
|
if (!dio48egpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + DIO48E_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
dio48egpio->base = devm_ioport_map(dev, base[id], DIO48E_EXTENT);
|
|
if (!dio48egpio->base)
|
|
return -ENOMEM;
|
|
|
|
dio48egpio->chip.label = name;
|
|
dio48egpio->chip.parent = dev;
|
|
dio48egpio->chip.owner = THIS_MODULE;
|
|
dio48egpio->chip.base = -1;
|
|
dio48egpio->chip.ngpio = DIO48E_NGPIO;
|
|
dio48egpio->chip.names = dio48e_names;
|
|
dio48egpio->chip.get_direction = dio48e_gpio_get_direction;
|
|
dio48egpio->chip.direction_input = dio48e_gpio_direction_input;
|
|
dio48egpio->chip.direction_output = dio48e_gpio_direction_output;
|
|
dio48egpio->chip.get = dio48e_gpio_get;
|
|
dio48egpio->chip.get_multiple = dio48e_gpio_get_multiple;
|
|
dio48egpio->chip.set = dio48e_gpio_set;
|
|
dio48egpio->chip.set_multiple = dio48e_gpio_set_multiple;
|
|
|
|
girq = &dio48egpio->chip.irq;
|
|
girq->chip = &dio48e_irqchip;
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_edge_irq;
|
|
girq->init_hw = dio48e_irq_init_hw;
|
|
|
|
raw_spin_lock_init(&dio48egpio->lock);
|
|
|
|
/* initialize all GPIO as output */
|
|
iowrite8(0x80, dio48egpio->base + 3);
|
|
iowrite8(0x00, dio48egpio->base);
|
|
iowrite8(0x00, dio48egpio->base + 1);
|
|
iowrite8(0x00, dio48egpio->base + 2);
|
|
iowrite8(0x00, dio48egpio->base + 3);
|
|
iowrite8(0x80, dio48egpio->base + 7);
|
|
iowrite8(0x00, dio48egpio->base + 4);
|
|
iowrite8(0x00, dio48egpio->base + 5);
|
|
iowrite8(0x00, dio48egpio->base + 6);
|
|
iowrite8(0x00, dio48egpio->base + 7);
|
|
|
|
err = devm_gpiochip_add_data(dev, &dio48egpio->chip, dio48egpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = devm_request_irq(dev, irq[id], dio48e_irq_handler, 0, name,
|
|
dio48egpio);
|
|
if (err) {
|
|
dev_err(dev, "IRQ handler registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct isa_driver dio48e_driver = {
|
|
.probe = dio48e_probe,
|
|
.driver = {
|
|
.name = "104-dio-48e"
|
|
},
|
|
};
|
|
module_isa_driver(dio48e_driver, num_dio48e);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|