forked from Minki/linux
ad48cf5e95
Implement support for the following device-tree and ACPI 5.1 DSD properties in the goodix touchscreen driver: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) These are necessary on tablets which have a display in portrait format while the touchscreen is in landscape format, such as e.g. the MSI Primo 81. Signed-off-by: Karsten Merker <merker@debian.org> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Irina Tirdea <irina.tirdea@intel.com> (with ACPI DSD properties) Tested-by: Aleksei Mamlin <mamlinav@gmail.com> (with device-tree properties) Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
44 lines
1.1 KiB
Plaintext
44 lines
1.1 KiB
Plaintext
Device tree bindings for Goodix GT9xx series touchscreen controller
|
|
|
|
Required properties:
|
|
|
|
- compatible : Should be "goodix,gt911"
|
|
or "goodix,gt9110"
|
|
or "goodix,gt912"
|
|
or "goodix,gt927"
|
|
or "goodix,gt9271"
|
|
or "goodix,gt928"
|
|
or "goodix,gt967"
|
|
- reg : I2C address of the chip. Should be 0x5d or 0x14
|
|
- interrupt-parent : Interrupt controller to which the chip is connected
|
|
- interrupts : Interrupt to which the chip is connected
|
|
|
|
Optional properties:
|
|
|
|
- irq-gpios : GPIO pin used for IRQ. The driver uses the
|
|
interrupt gpio pin as output to reset the device.
|
|
- reset-gpios : GPIO pin used for reset
|
|
|
|
- touchscreen-inverted-x : X axis is inverted (boolean)
|
|
- touchscreen-inverted-y : Y axis is inverted (boolean)
|
|
- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
|
|
(swapping is done after inverting the axis)
|
|
|
|
Example:
|
|
|
|
i2c@00000000 {
|
|
/* ... */
|
|
|
|
gt928@5d {
|
|
compatible = "goodix,gt928";
|
|
reg = <0x5d>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <0 0>;
|
|
|
|
irq-gpios = <&gpio1 0 0>;
|
|
reset-gpios = <&gpio1 1 0>;
|
|
};
|
|
|
|
/* ... */
|
|
};
|