forked from Minki/linux
ef513be0a9
USB 2.0 specification chapter 11.17.5 says "as part of endpoint halt processing for full-/low-speed endpoints connected via a TT, the host software must use the Clear_TT_Buffer request to the TT to ensure that the buffer is not in the busy state". In our case, a full-speed speaker (ConferenceCam) is behind a high- speed hub (ConferenceCam Connect), sometimes once we get STALL on a request we may continue to get STALL with the folllowing requests, like Set_Interface. Here we invoke usb_hub_clear_tt_buffer() to send Clear_TT_Buffer request to the hub of the device for the following Set_Interface requests to the device to get ACK successfully. Signed-off-by: Jim Lin <jilin@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|---|---|---|
| .. | ||
| atm | ||
| c67x00 | ||
| chipidea | ||
| class | ||
| common | ||
| core | ||
| dwc2 | ||
| dwc3 | ||
| early | ||
| gadget | ||
| host | ||
| image | ||
| isp1760 | ||
| misc | ||
| mon | ||
| mtu3 | ||
| musb | ||
| phy | ||
| renesas_usbhs | ||
| roles | ||
| serial | ||
| storage | ||
| typec | ||
| usbip | ||
| wusbcore | ||
| Kconfig | ||
| Makefile | ||
| usb-skeleton.c | ||