forked from Minki/linux
ef18beded8
When we run the following commands in turn (with CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0), speaker-test -Dhw:0,3 -c2 -twav # HDMI speaker-test -Dhw:0,0 -c2 -twav # Analog The second command will produce sound in the analog lineout _as well as_ HDMI sink. The root cause is, device 0 "reuses" the same stream tag that was used by device 3, and the "intelhdmi - sticky stream id" patch leaves the HDMI codec in a functional state. So the HDMI codec happily accepts the audio samples which reuse its stream tag. The proposed solution is to remember the last device each azx_dev was assigned to, and prefer to 1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used 2) or assign a never-used azx_dev for HDMI With this patch and the above two speaker-test commands, HDMI codec will use stream tag 8 and Analog codec will use 5. The stream tag used by HDMI codec won't be reused by others, as long as we don't run out of the 4 playback azx_dev's. The legacy Analog codec will continue to use stream tag 5 because its device id is 0 (this is a bit tricky). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|---|---|---|
| .. | ||
| aoa | ||
| arm | ||
| atmel | ||
| core | ||
| drivers | ||
| i2c | ||
| isa | ||
| mips | ||
| oss | ||
| parisc | ||
| pci | ||
| pcmcia | ||
| ppc | ||
| sh | ||
| soc | ||
| sparc | ||
| spi | ||
| synth | ||
| usb | ||
| ac97_bus.c | ||
| Kconfig | ||
| last.c | ||
| Makefile | ||
| sound_core.c | ||
| sound_firmware.c | ||