forked from Minki/linux
ef08af03ef
There was a bug in XAUI synchronisation in early 10Xpress firmware versions. This is fixed in released firmware and we do not need to work around it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
325 lines
8.6 KiB
C
325 lines
8.6 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare Solarstorm network controllers and boards
|
|
* Copyright 2007 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
|
|
/*****************************************************************************
|
|
* Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that
|
|
* controls the PHY power rails, and for the MAX6647 temp. sensor used to check
|
|
* the PHY
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include "net_driver.h"
|
|
#include "efx.h"
|
|
#include "phy.h"
|
|
#include "boards.h"
|
|
#include "falcon.h"
|
|
#include "falcon_hwdefs.h"
|
|
#include "falcon_io.h"
|
|
#include "mac.h"
|
|
|
|
/**************************************************************************
|
|
*
|
|
* I2C IO Expander device
|
|
*
|
|
**************************************************************************/
|
|
#define PCA9539 0x74
|
|
|
|
#define P0_IN 0x00
|
|
#define P0_OUT 0x02
|
|
#define P0_INVERT 0x04
|
|
#define P0_CONFIG 0x06
|
|
|
|
#define P0_EN_1V0X_LBN 0
|
|
#define P0_EN_1V0X_WIDTH 1
|
|
#define P0_EN_1V2_LBN 1
|
|
#define P0_EN_1V2_WIDTH 1
|
|
#define P0_EN_2V5_LBN 2
|
|
#define P0_EN_2V5_WIDTH 1
|
|
#define P0_EN_3V3X_LBN 3
|
|
#define P0_EN_3V3X_WIDTH 1
|
|
#define P0_EN_5V_LBN 4
|
|
#define P0_EN_5V_WIDTH 1
|
|
#define P0_SHORTEN_JTAG_LBN 5
|
|
#define P0_SHORTEN_JTAG_WIDTH 1
|
|
#define P0_X_TRST_LBN 6
|
|
#define P0_X_TRST_WIDTH 1
|
|
#define P0_DSP_RESET_LBN 7
|
|
#define P0_DSP_RESET_WIDTH 1
|
|
|
|
#define P1_IN 0x01
|
|
#define P1_OUT 0x03
|
|
#define P1_INVERT 0x05
|
|
#define P1_CONFIG 0x07
|
|
|
|
#define P1_AFE_PWD_LBN 0
|
|
#define P1_AFE_PWD_WIDTH 1
|
|
#define P1_DSP_PWD25_LBN 1
|
|
#define P1_DSP_PWD25_WIDTH 1
|
|
#define P1_RESERVED_LBN 2
|
|
#define P1_RESERVED_WIDTH 2
|
|
#define P1_SPARE_LBN 4
|
|
#define P1_SPARE_WIDTH 4
|
|
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Temperature Sensor
|
|
*
|
|
**************************************************************************/
|
|
#define MAX6647 0x4e
|
|
|
|
#define RLTS 0x00
|
|
#define RLTE 0x01
|
|
#define RSL 0x02
|
|
#define RCL 0x03
|
|
#define RCRA 0x04
|
|
#define RLHN 0x05
|
|
#define RLLI 0x06
|
|
#define RRHI 0x07
|
|
#define RRLS 0x08
|
|
#define WCRW 0x0a
|
|
#define WLHO 0x0b
|
|
#define WRHA 0x0c
|
|
#define WRLN 0x0e
|
|
#define OSHT 0x0f
|
|
#define REET 0x10
|
|
#define RIET 0x11
|
|
#define RWOE 0x19
|
|
#define RWOI 0x20
|
|
#define HYS 0x21
|
|
#define QUEUE 0x22
|
|
#define MFID 0xfe
|
|
#define REVID 0xff
|
|
|
|
/* Status bits */
|
|
#define MAX6647_BUSY (1 << 7) /* ADC is converting */
|
|
#define MAX6647_LHIGH (1 << 6) /* Local high temp. alarm */
|
|
#define MAX6647_LLOW (1 << 5) /* Local low temp. alarm */
|
|
#define MAX6647_RHIGH (1 << 4) /* Remote high temp. alarm */
|
|
#define MAX6647_RLOW (1 << 3) /* Remote low temp. alarm */
|
|
#define MAX6647_FAULT (1 << 2) /* DXN/DXP short/open circuit */
|
|
#define MAX6647_EOT (1 << 1) /* Remote junction overtemp. */
|
|
#define MAX6647_IOT (1 << 0) /* Local junction overtemp. */
|
|
|
|
static const u8 xgphy_max_temperature = 90;
|
|
|
|
static void sfe4001_poweroff(struct efx_nic *efx)
|
|
{
|
|
struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
|
|
struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
|
|
|
|
/* Turn off all power rails and disable outputs */
|
|
i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
|
|
i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
|
|
i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);
|
|
|
|
/* Clear any over-temperature alert */
|
|
i2c_smbus_read_byte_data(hwmon_client, RSL);
|
|
}
|
|
|
|
static int sfe4001_poweron(struct efx_nic *efx)
|
|
{
|
|
struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
|
|
struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
|
|
unsigned int i, j;
|
|
int rc;
|
|
u8 out;
|
|
|
|
/* Clear any previous over-temperature alert */
|
|
rc = i2c_smbus_read_byte_data(hwmon_client, RSL);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Enable port 0 and port 1 outputs on IO expander */
|
|
rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
|
|
if (rc)
|
|
return rc;
|
|
rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
|
|
0xff & ~(1 << P1_SPARE_LBN));
|
|
if (rc)
|
|
goto fail_on;
|
|
|
|
/* If PHY power is on, turn it all off and wait 1 second to
|
|
* ensure a full reset.
|
|
*/
|
|
rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
|
|
if (rc < 0)
|
|
goto fail_on;
|
|
out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
|
|
(0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
|
|
(0 << P0_EN_1V0X_LBN));
|
|
if (rc != out) {
|
|
EFX_INFO(efx, "power-cycling PHY\n");
|
|
rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
|
|
if (rc)
|
|
goto fail_on;
|
|
schedule_timeout_uninterruptible(HZ);
|
|
}
|
|
|
|
for (i = 0; i < 20; ++i) {
|
|
/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
|
|
out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
|
|
(1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
|
|
(1 << P0_X_TRST_LBN));
|
|
if (efx->phy_mode & PHY_MODE_SPECIAL)
|
|
out |= 1 << P0_EN_3V3X_LBN;
|
|
|
|
rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
|
|
if (rc)
|
|
goto fail_on;
|
|
msleep(10);
|
|
|
|
/* Turn on 1V power rail */
|
|
out &= ~(1 << P0_EN_1V0X_LBN);
|
|
rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
|
|
if (rc)
|
|
goto fail_on;
|
|
|
|
EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);
|
|
|
|
/* In flash config mode, DSP does not turn on AFE, so
|
|
* just wait 1 second.
|
|
*/
|
|
if (efx->phy_mode & PHY_MODE_SPECIAL) {
|
|
schedule_timeout_uninterruptible(HZ);
|
|
return 0;
|
|
}
|
|
|
|
for (j = 0; j < 10; ++j) {
|
|
msleep(100);
|
|
|
|
/* Check DSP has asserted AFE power line */
|
|
rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
|
|
if (rc < 0)
|
|
goto fail_on;
|
|
if (rc & (1 << P1_AFE_PWD_LBN))
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
EFX_INFO(efx, "timed out waiting for DSP boot\n");
|
|
rc = -ETIMEDOUT;
|
|
fail_on:
|
|
sfe4001_poweroff(efx);
|
|
return rc;
|
|
}
|
|
|
|
/* On SFE4001 rev A2 and later, we can control the FLASH_CFG_1 pin
|
|
* using the 3V3X output of the IO-expander. Allow the user to set
|
|
* this when the device is stopped, and keep it stopped then.
|
|
*/
|
|
|
|
static ssize_t show_phy_flash_cfg(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
|
|
return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
|
|
}
|
|
|
|
static ssize_t set_phy_flash_cfg(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
|
|
enum efx_phy_mode old_mode, new_mode;
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
old_mode = efx->phy_mode;
|
|
if (count == 0 || *buf == '0')
|
|
new_mode = old_mode & ~PHY_MODE_SPECIAL;
|
|
else
|
|
new_mode = PHY_MODE_SPECIAL;
|
|
if (old_mode == new_mode) {
|
|
err = 0;
|
|
} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
|
|
err = -EBUSY;
|
|
} else {
|
|
efx->phy_mode = new_mode;
|
|
err = sfe4001_poweron(efx);
|
|
efx_reconfigure_port(efx);
|
|
}
|
|
rtnl_unlock();
|
|
|
|
return err ? err : count;
|
|
}
|
|
|
|
static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);
|
|
|
|
static void sfe4001_fini(struct efx_nic *efx)
|
|
{
|
|
EFX_INFO(efx, "%s\n", __func__);
|
|
|
|
device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
|
|
sfe4001_poweroff(efx);
|
|
i2c_unregister_device(efx->board_info.ioexp_client);
|
|
i2c_unregister_device(efx->board_info.hwmon_client);
|
|
}
|
|
|
|
/* This board uses an I2C expander to provider power to the PHY, which needs to
|
|
* be turned on before the PHY can be used.
|
|
* Context: Process context, rtnl lock held
|
|
*/
|
|
int sfe4001_init(struct efx_nic *efx)
|
|
{
|
|
struct i2c_client *hwmon_client;
|
|
int rc;
|
|
|
|
hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647);
|
|
if (!hwmon_client)
|
|
return -EIO;
|
|
efx->board_info.hwmon_client = hwmon_client;
|
|
|
|
/* Set DSP over-temperature alert threshold */
|
|
EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
|
|
rc = i2c_smbus_write_byte_data(hwmon_client, WLHO,
|
|
xgphy_max_temperature);
|
|
if (rc)
|
|
goto fail_ioexp;
|
|
|
|
/* Read it back and verify */
|
|
rc = i2c_smbus_read_byte_data(hwmon_client, RLHN);
|
|
if (rc < 0)
|
|
goto fail_ioexp;
|
|
if (rc != xgphy_max_temperature) {
|
|
rc = -EFAULT;
|
|
goto fail_ioexp;
|
|
}
|
|
|
|
efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
|
|
if (!efx->board_info.ioexp_client) {
|
|
rc = -EIO;
|
|
goto fail_hwmon;
|
|
}
|
|
|
|
/* 10Xpress has fixed-function LED pins, so there is no board-specific
|
|
* blink code. */
|
|
efx->board_info.blink = tenxpress_phy_blink;
|
|
|
|
efx->board_info.fini = sfe4001_fini;
|
|
|
|
rc = sfe4001_poweron(efx);
|
|
if (rc)
|
|
goto fail_ioexp;
|
|
|
|
rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
|
|
if (rc)
|
|
goto fail_on;
|
|
|
|
EFX_INFO(efx, "PHY is powered on\n");
|
|
return 0;
|
|
|
|
fail_on:
|
|
sfe4001_poweroff(efx);
|
|
fail_ioexp:
|
|
i2c_unregister_device(efx->board_info.ioexp_client);
|
|
fail_hwmon:
|
|
i2c_unregister_device(hwmon_client);
|
|
return rc;
|
|
}
|