forked from Minki/linux
28d27cf4ce
Especially on Kirkwood, a couple GPIOs are actually only output capable. Let's separate the ability to configure a GPIO as input or output to accommodate this restriction. Signed-off-by: Nicolas Pitre <nico@marvell.com>
404 lines
9.1 KiB
C
404 lines
9.1 KiB
C
/*
|
|
* arch/arm/plat-orion/gpio.c
|
|
*
|
|
* Marvell Orion SoC GPIO handling.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <asm/gpio.h>
|
|
|
|
static DEFINE_SPINLOCK(gpio_lock);
|
|
static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
|
|
static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
|
|
static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
|
|
|
|
static inline void __set_direction(unsigned pin, int input)
|
|
{
|
|
u32 u;
|
|
|
|
u = readl(GPIO_IO_CONF(pin));
|
|
if (input)
|
|
u |= 1 << (pin & 31);
|
|
else
|
|
u &= ~(1 << (pin & 31));
|
|
writel(u, GPIO_IO_CONF(pin));
|
|
}
|
|
|
|
static void __set_level(unsigned pin, int high)
|
|
{
|
|
u32 u;
|
|
|
|
u = readl(GPIO_OUT(pin));
|
|
if (high)
|
|
u |= 1 << (pin & 31);
|
|
else
|
|
u &= ~(1 << (pin & 31));
|
|
writel(u, GPIO_OUT(pin));
|
|
}
|
|
|
|
|
|
/*
|
|
* GENERIC_GPIO primitives.
|
|
*/
|
|
int gpio_direction_input(unsigned pin)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
|
|
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
/*
|
|
* Some callers might not have used gpio_request(),
|
|
* so flag this pin as requested now.
|
|
*/
|
|
if (gpio_label[pin] == NULL)
|
|
gpio_label[pin] = "?";
|
|
|
|
/*
|
|
* Configure GPIO direction.
|
|
*/
|
|
__set_direction(pin, 1);
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(gpio_direction_input);
|
|
|
|
int gpio_direction_output(unsigned pin, int value)
|
|
{
|
|
unsigned long flags;
|
|
u32 u;
|
|
|
|
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
|
|
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
/*
|
|
* Some callers might not have used gpio_request(),
|
|
* so flag this pin as requested now.
|
|
*/
|
|
if (gpio_label[pin] == NULL)
|
|
gpio_label[pin] = "?";
|
|
|
|
/*
|
|
* Disable blinking.
|
|
*/
|
|
u = readl(GPIO_BLINK_EN(pin));
|
|
u &= ~(1 << (pin & 31));
|
|
writel(u, GPIO_BLINK_EN(pin));
|
|
|
|
/*
|
|
* Configure GPIO output value.
|
|
*/
|
|
__set_level(pin, value);
|
|
|
|
/*
|
|
* Configure GPIO direction.
|
|
*/
|
|
__set_direction(pin, 0);
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(gpio_direction_output);
|
|
|
|
int gpio_get_value(unsigned pin)
|
|
{
|
|
int val;
|
|
|
|
if (readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31)))
|
|
val = readl(GPIO_DATA_IN(pin)) ^ readl(GPIO_IN_POL(pin));
|
|
else
|
|
val = readl(GPIO_OUT(pin));
|
|
|
|
return (val >> (pin & 31)) & 1;
|
|
}
|
|
EXPORT_SYMBOL(gpio_get_value);
|
|
|
|
void gpio_set_value(unsigned pin, int value)
|
|
{
|
|
unsigned long flags;
|
|
u32 u;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
/*
|
|
* Disable blinking.
|
|
*/
|
|
u = readl(GPIO_BLINK_EN(pin));
|
|
u &= ~(1 << (pin & 31));
|
|
writel(u, GPIO_BLINK_EN(pin));
|
|
|
|
/*
|
|
* Configure GPIO output value.
|
|
*/
|
|
__set_level(pin, value);
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(gpio_set_value);
|
|
|
|
int gpio_request(unsigned pin, const char *label)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (pin >= GPIO_MAX ||
|
|
!(test_bit(pin, gpio_valid_input) ||
|
|
test_bit(pin, gpio_valid_output))) {
|
|
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
if (gpio_label[pin] == NULL) {
|
|
gpio_label[pin] = label ? label : "?";
|
|
ret = 0;
|
|
} else {
|
|
pr_debug("%s: GPIO %d already used as %s\n",
|
|
__func__, pin, gpio_label[pin]);
|
|
ret = -EBUSY;
|
|
}
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(gpio_request);
|
|
|
|
void gpio_free(unsigned pin)
|
|
{
|
|
if (pin >= GPIO_MAX ||
|
|
!(test_bit(pin, gpio_valid_input) ||
|
|
test_bit(pin, gpio_valid_output))) {
|
|
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
|
|
return;
|
|
}
|
|
|
|
if (gpio_label[pin] == NULL)
|
|
pr_warning("%s: GPIO %d already freed\n", __func__, pin);
|
|
else
|
|
gpio_label[pin] = NULL;
|
|
}
|
|
EXPORT_SYMBOL(gpio_free);
|
|
|
|
|
|
/*
|
|
* Orion-specific GPIO API extensions.
|
|
*/
|
|
void __init orion_gpio_set_unused(unsigned pin)
|
|
{
|
|
/*
|
|
* Configure as output, drive low.
|
|
*/
|
|
__set_level(pin, 0);
|
|
__set_direction(pin, 0);
|
|
}
|
|
|
|
void __init orion_gpio_set_valid(unsigned pin, int mode)
|
|
{
|
|
if (mode == 1)
|
|
mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
|
|
if (mode & GPIO_INPUT_OK)
|
|
__set_bit(pin, gpio_valid_input);
|
|
else
|
|
__clear_bit(pin, gpio_valid_input);
|
|
if (mode & GPIO_OUTPUT_OK)
|
|
__set_bit(pin, gpio_valid_output);
|
|
else
|
|
__clear_bit(pin, gpio_valid_output);
|
|
}
|
|
|
|
void orion_gpio_set_blink(unsigned pin, int blink)
|
|
{
|
|
unsigned long flags;
|
|
u32 u;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
/*
|
|
* Set output value to zero.
|
|
*/
|
|
__set_level(pin, 0);
|
|
|
|
u = readl(GPIO_BLINK_EN(pin));
|
|
if (blink)
|
|
u |= 1 << (pin & 31);
|
|
else
|
|
u &= ~(1 << (pin & 31));
|
|
writel(u, GPIO_BLINK_EN(pin));
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(orion_gpio_set_blink);
|
|
|
|
|
|
/*****************************************************************************
|
|
* Orion GPIO IRQ
|
|
*
|
|
* GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same
|
|
* value of the line or the opposite value.
|
|
*
|
|
* Level IRQ handlers: DATA_IN is used directly as cause register.
|
|
* Interrupt are masked by LEVEL_MASK registers.
|
|
* Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE.
|
|
* Interrupt are masked by EDGE_MASK registers.
|
|
* Both-edge handlers: Similar to regular Edge handlers, but also swaps
|
|
* the polarity to catch the next line transaction.
|
|
* This is a race condition that might not perfectly
|
|
* work on some use cases.
|
|
*
|
|
* Every eight GPIO lines are grouped (OR'ed) before going up to main
|
|
* cause register.
|
|
*
|
|
* EDGE cause mask
|
|
* data-in /--------| |-----| |----\
|
|
* -----| |----- ---- to main cause reg
|
|
* X \----------------| |----/
|
|
* polarity LEVEL mask
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void gpio_irq_ack(u32 irq)
|
|
{
|
|
int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
int pin = irq_to_gpio(irq);
|
|
writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
|
|
}
|
|
}
|
|
|
|
static void gpio_irq_mask(u32 irq)
|
|
{
|
|
int pin = irq_to_gpio(irq);
|
|
int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
|
|
u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
|
|
GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
|
|
u32 u = readl(reg);
|
|
u &= ~(1 << (pin & 31));
|
|
writel(u, reg);
|
|
}
|
|
|
|
static void gpio_irq_unmask(u32 irq)
|
|
{
|
|
int pin = irq_to_gpio(irq);
|
|
int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
|
|
u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
|
|
GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
|
|
u32 u = readl(reg);
|
|
u |= 1 << (pin & 31);
|
|
writel(u, reg);
|
|
}
|
|
|
|
static int gpio_irq_set_type(u32 irq, u32 type)
|
|
{
|
|
int pin = irq_to_gpio(irq);
|
|
struct irq_desc *desc;
|
|
u32 u;
|
|
|
|
u = readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31));
|
|
if (!u) {
|
|
printk(KERN_ERR "orion gpio_irq_set_type failed "
|
|
"(irq %d, pin %d).\n", irq, pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
desc = irq_desc + irq;
|
|
|
|
/*
|
|
* Set edge/level type.
|
|
*/
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
desc->handle_irq = handle_edge_irq;
|
|
} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
|
desc->handle_irq = handle_level_irq;
|
|
} else {
|
|
printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Configure interrupt polarity.
|
|
*/
|
|
if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) {
|
|
u = readl(GPIO_IN_POL(pin));
|
|
u &= ~(1 << (pin & 31));
|
|
writel(u, GPIO_IN_POL(pin));
|
|
} else if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW) {
|
|
u = readl(GPIO_IN_POL(pin));
|
|
u |= 1 << (pin & 31);
|
|
writel(u, GPIO_IN_POL(pin));
|
|
} else if (type == IRQ_TYPE_EDGE_BOTH) {
|
|
u32 v;
|
|
|
|
v = readl(GPIO_IN_POL(pin)) ^ readl(GPIO_DATA_IN(pin));
|
|
|
|
/*
|
|
* set initial polarity based on current input level
|
|
*/
|
|
u = readl(GPIO_IN_POL(pin));
|
|
if (v & (1 << (pin & 31)))
|
|
u |= 1 << (pin & 31); /* falling */
|
|
else
|
|
u &= ~(1 << (pin & 31)); /* rising */
|
|
writel(u, GPIO_IN_POL(pin));
|
|
}
|
|
|
|
desc->status = (desc->status & ~IRQ_TYPE_SENSE_MASK) | type;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct irq_chip orion_gpio_irq_chip = {
|
|
.name = "orion_gpio",
|
|
.ack = gpio_irq_ack,
|
|
.mask = gpio_irq_mask,
|
|
.unmask = gpio_irq_unmask,
|
|
.set_type = gpio_irq_set_type,
|
|
};
|
|
|
|
void orion_gpio_irq_handler(int pinoff)
|
|
{
|
|
u32 cause;
|
|
int pin;
|
|
|
|
cause = readl(GPIO_DATA_IN(pinoff)) & readl(GPIO_LEVEL_MASK(pinoff));
|
|
cause |= readl(GPIO_EDGE_CAUSE(pinoff)) & readl(GPIO_EDGE_MASK(pinoff));
|
|
|
|
for (pin = pinoff; pin < pinoff + 8; pin++) {
|
|
int irq = gpio_to_irq(pin);
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
|
|
if (!(cause & (1 << (pin & 31))))
|
|
continue;
|
|
|
|
if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
|
|
/* Swap polarity (race with GPIO line) */
|
|
u32 polarity;
|
|
|
|
polarity = readl(GPIO_IN_POL(pin));
|
|
polarity ^= 1 << (pin & 31);
|
|
writel(polarity, GPIO_IN_POL(pin));
|
|
}
|
|
desc_handle_irq(irq, desc);
|
|
}
|
|
}
|