forked from Minki/linux
ee90dabcad
These files want to provide/access ELF hwcap information, so should be including asm/elf.h rather than asm/procinfo.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
511 lines
13 KiB
ArmAsm
511 lines
13 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/proc-xsc3.S
|
|
*
|
|
* Original Author: Matthew Gilbert
|
|
* Current Maintainer: Deepak Saxena <dsaxena@plexity.net>
|
|
*
|
|
* Copyright 2004 (C) Intel Corp.
|
|
* Copyright 2005 (c) MontaVista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an
|
|
* extension to Intel's original XScale core that adds the following
|
|
* features:
|
|
*
|
|
* - ARMv6 Supersections
|
|
* - Low Locality Reference pages (replaces mini-cache)
|
|
* - 36-bit addressing
|
|
* - L2 cache
|
|
* - Cache-coherency if chipset supports it
|
|
*
|
|
* Based on orignal XScale code by Nicolas Pitre
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/elf.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/page.h>
|
|
#include <asm/ptrace.h>
|
|
#include "proc-macros.S"
|
|
|
|
/*
|
|
* This is the maximum size of an area which will be flushed. If the
|
|
* area is larger than this, then we flush the whole cache.
|
|
*/
|
|
#define MAX_AREA_SIZE 32768
|
|
|
|
/*
|
|
* The cache line size of the I and D cache.
|
|
*/
|
|
#define CACHELINESIZE 32
|
|
|
|
/*
|
|
* The size of the data cache.
|
|
*/
|
|
#define CACHESIZE 32768
|
|
|
|
/*
|
|
* Run with L2 enabled.
|
|
*/
|
|
#define L2_CACHE_ENABLE 1
|
|
|
|
/*
|
|
* Enable the Branch Target Buffer (can cause crashes, see erratum #42.)
|
|
*/
|
|
#define BTB_ENABLE 0
|
|
|
|
/*
|
|
* This macro is used to wait for a CP15 write and is needed
|
|
* when we have to ensure that the last operation to the co-pro
|
|
* was completed before continuing with operation.
|
|
*/
|
|
.macro cpwait_ret, lr, rd
|
|
mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
|
|
sub pc, \lr, \rd, LSR #32 @ wait for completion and
|
|
@ flush instruction pipeline
|
|
.endm
|
|
|
|
/*
|
|
* This macro cleans & invalidates the entire xsc3 dcache by set & way.
|
|
*/
|
|
|
|
.macro clean_d_cache rd, rs
|
|
mov \rd, #0x1f00
|
|
orr \rd, \rd, #0x00e0
|
|
1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way
|
|
adds \rd, \rd, #0x40000000
|
|
bcc 1b
|
|
subs \rd, \rd, #0x20
|
|
bpl 1b
|
|
.endm
|
|
|
|
.text
|
|
|
|
/*
|
|
* cpu_xsc3_proc_init()
|
|
*
|
|
* Nothing too exciting at the moment
|
|
*/
|
|
ENTRY(cpu_xsc3_proc_init)
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_xsc3_proc_fin()
|
|
*/
|
|
ENTRY(cpu_xsc3_proc_fin)
|
|
str lr, [sp, #-4]!
|
|
mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
|
|
msr cpsr_c, r0
|
|
bl xsc3_flush_kern_cache_all @ clean caches
|
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
|
|
bic r0, r0, #0x1800 @ ...IZ...........
|
|
bic r0, r0, #0x0006 @ .............CA.
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
ldr pc, [sp], #4
|
|
|
|
/*
|
|
* cpu_xsc3_reset(loc)
|
|
*
|
|
* Perform a soft reset of the system. Put the CPU into the
|
|
* same state as it would be if it had been reset, and branch
|
|
* to what would be the reset vector.
|
|
*
|
|
* loc: location to jump to for soft reset
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_xsc3_reset)
|
|
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
|
|
msr cpsr_c, r1 @ reset CPSR
|
|
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
|
|
bic r1, r1, #0x0086 @ ........B....CA.
|
|
bic r1, r1, #0x3900 @ ..VIZ..S........
|
|
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
|
|
bic r1, r1, #0x0001 @ ...............M
|
|
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
|
|
@ CAUTION: MMU turned off from this point. We count on the pipeline
|
|
@ already containing those two last instructions to survive.
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
|
mov pc, r0
|
|
|
|
/*
|
|
* cpu_xsc3_do_idle()
|
|
*
|
|
* Cause the processor to idle
|
|
*
|
|
* For now we do nothing but go to idle mode for every case
|
|
*
|
|
* XScale supports clock switching, but using idle mode support
|
|
* allows external hardware to react to system state changes.
|
|
|
|
MMG: Come back to this one.
|
|
*/
|
|
.align 5
|
|
|
|
ENTRY(cpu_xsc3_do_idle)
|
|
mov r0, #1
|
|
mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
|
|
mov pc, lr
|
|
|
|
/* ================================= CACHE ================================ */
|
|
|
|
/*
|
|
* flush_user_cache_all()
|
|
*
|
|
* Invalidate all cache entries in a particular address
|
|
* space.
|
|
*/
|
|
ENTRY(xsc3_flush_user_cache_all)
|
|
/* FALLTHROUGH */
|
|
|
|
/*
|
|
* flush_kern_cache_all()
|
|
*
|
|
* Clean and invalidate the entire cache.
|
|
*/
|
|
ENTRY(xsc3_flush_kern_cache_all)
|
|
mov r2, #VM_EXEC
|
|
mov ip, #0
|
|
__flush_whole_cache:
|
|
clean_d_cache r0, r1
|
|
tst r2, #VM_EXEC
|
|
mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
|
|
mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
|
|
mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush
|
|
mov pc, lr
|
|
|
|
/*
|
|
* flush_user_cache_range(start, end, vm_flags)
|
|
*
|
|
* Invalidate a range of cache entries in the specified
|
|
* address space.
|
|
*
|
|
* - start - start address (may not be aligned)
|
|
* - end - end address (exclusive, may not be aligned)
|
|
* - vma - vma_area_struct describing address space
|
|
*/
|
|
.align 5
|
|
ENTRY(xsc3_flush_user_cache_range)
|
|
mov ip, #0
|
|
sub r3, r1, r0 @ calculate total size
|
|
cmp r3, #MAX_AREA_SIZE
|
|
bhs __flush_whole_cache
|
|
|
|
1: tst r2, #VM_EXEC
|
|
mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line
|
|
mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line
|
|
add r0, r0, #CACHELINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
tst r2, #VM_EXEC
|
|
mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB
|
|
mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
|
|
mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush
|
|
mov pc, lr
|
|
|
|
/*
|
|
* coherent_kern_range(start, end)
|
|
*
|
|
* Ensure coherency between the Icache and the Dcache in the
|
|
* region described by start. If you have non-snooping
|
|
* Harvard caches, you need to implement this function.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*
|
|
* Note: single I-cache line invalidation isn't used here since
|
|
* it also trashes the mini I-cache used by JTAG debuggers.
|
|
*/
|
|
ENTRY(xsc3_coherent_kern_range)
|
|
/* FALLTHROUGH */
|
|
ENTRY(xsc3_coherent_user_range)
|
|
bic r0, r0, #CACHELINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #CACHELINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
|
|
mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
|
|
mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush
|
|
mov pc, lr
|
|
|
|
/*
|
|
* flush_kern_dcache_page(void *page)
|
|
*
|
|
* Ensure no D cache aliasing occurs, either with itself or
|
|
* the I cache
|
|
*
|
|
* - addr - page aligned address
|
|
*/
|
|
ENTRY(xsc3_flush_kern_dcache_page)
|
|
add r1, r0, #PAGE_SZ
|
|
1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line
|
|
add r0, r0, #CACHELINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
|
|
mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
|
|
mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_inv_range(start, end)
|
|
*
|
|
* Invalidate (discard) the specified virtual address range.
|
|
* May not write back any entries. If 'start' or 'end'
|
|
* are not cache line aligned, those lines must be written
|
|
* back.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*/
|
|
ENTRY(xsc3_dma_inv_range)
|
|
tst r0, #CACHELINESIZE - 1
|
|
bic r0, r0, #CACHELINESIZE - 1
|
|
mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry
|
|
mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry
|
|
tst r1, #CACHELINESIZE - 1
|
|
mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry
|
|
mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry
|
|
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry
|
|
mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line
|
|
add r0, r0, #CACHELINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_clean_range(start, end)
|
|
*
|
|
* Clean the specified virtual address range.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*/
|
|
ENTRY(xsc3_dma_clean_range)
|
|
bic r0, r0, #CACHELINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry
|
|
mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry
|
|
add r0, r0, #CACHELINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_flush_range(start, end)
|
|
*
|
|
* Clean and invalidate the specified virtual address range.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*/
|
|
ENTRY(xsc3_dma_flush_range)
|
|
bic r0, r0, #CACHELINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line
|
|
mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line
|
|
mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line
|
|
add r0, r0, #CACHELINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
|
|
mov pc, lr
|
|
|
|
ENTRY(xsc3_cache_fns)
|
|
.long xsc3_flush_kern_cache_all
|
|
.long xsc3_flush_user_cache_all
|
|
.long xsc3_flush_user_cache_range
|
|
.long xsc3_coherent_kern_range
|
|
.long xsc3_coherent_user_range
|
|
.long xsc3_flush_kern_dcache_page
|
|
.long xsc3_dma_inv_range
|
|
.long xsc3_dma_clean_range
|
|
.long xsc3_dma_flush_range
|
|
|
|
ENTRY(cpu_xsc3_dcache_clean_area)
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #CACHELINESIZE
|
|
subs r1, r1, #CACHELINESIZE
|
|
bhi 1b
|
|
mov pc, lr
|
|
|
|
/* =============================== PageTable ============================== */
|
|
|
|
/*
|
|
* cpu_xsc3_switch_mm(pgd)
|
|
*
|
|
* Set the translation base pointer to be as described by pgd.
|
|
*
|
|
* pgd: new page tables
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_xsc3_switch_mm)
|
|
clean_d_cache r1, r2
|
|
mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
|
|
mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
|
|
mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush
|
|
#ifdef L2_CACHE_ENABLE
|
|
orr r0, r0, #0x18 @ cache the page table in L2
|
|
#endif
|
|
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
|
cpwait_ret lr, ip
|
|
|
|
/*
|
|
* cpu_xsc3_set_pte(ptep, pte)
|
|
*
|
|
* Set a PTE and flush it out
|
|
*
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_xsc3_set_pte)
|
|
str r1, [r0], #-2048 @ linux version
|
|
|
|
bic r2, r1, #0xdf0 @ Keep C, B, coherency bits
|
|
orr r2, r2, #PTE_TYPE_EXT @ extended page
|
|
|
|
eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
|
|
|
|
tst r3, #L_PTE_USER @ User?
|
|
orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
|
|
|
|
tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
|
|
orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
|
|
@ combined with user -> user r/w
|
|
|
|
#if L2_CACHE_ENABLE
|
|
@ If its cacheable it needs to be in L2 also.
|
|
eor ip, r1, #L_PTE_CACHEABLE
|
|
tst ip, #L_PTE_CACHEABLE
|
|
orreq r2, r2, #PTE_EXT_TEX(0x5)
|
|
#endif
|
|
|
|
tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
|
|
movne r2, #0 @ no -> fault
|
|
|
|
str r2, [r0] @ hardware version
|
|
mov ip, #0
|
|
mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr
|
|
mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
|
|
mov pc, lr
|
|
|
|
.ltorg
|
|
|
|
.align
|
|
|
|
__INIT
|
|
|
|
.type __xsc3_setup, #function
|
|
__xsc3_setup:
|
|
mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
|
|
msr cpsr_c, r0
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
|
|
mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
|
|
mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
|
|
#if L2_CACHE_ENABLE
|
|
orr r4, r4, #0x18 @ cache the page table in L2
|
|
#endif
|
|
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
|
|
mov r0, #1 @ Allow access to CP0 and CP13
|
|
orr r0, r0, #1 << 13 @ Its undefined whether this
|
|
mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
|
|
mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg
|
|
and r0, r0, #2 @ preserve bit P bit setting
|
|
#if L2_CACHE_ENABLE
|
|
orr r0, r0, #(1 << 10) @ enable L2 for LLR cache
|
|
#endif
|
|
mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg
|
|
|
|
adr r5, xsc3_crval
|
|
ldmia r5, {r5, r6}
|
|
mrc p15, 0, r0, c1, c0, 0 @ get control register
|
|
bic r0, r0, r5 @ .... .... .... ..A.
|
|
orr r0, r0, r6 @ .... .... .... .C.M
|
|
#if BTB_ENABLE
|
|
orr r0, r0, #0x00000800 @ ..VI Z..S .... ....
|
|
#endif
|
|
#if L2_CACHE_ENABLE
|
|
orr r0, r0, #0x04000000 @ L2 enable
|
|
#endif
|
|
mov pc, lr
|
|
|
|
.size __xsc3_setup, . - __xsc3_setup
|
|
|
|
.type xsc3_crval, #object
|
|
xsc3_crval:
|
|
crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
|
|
|
|
__INITDATA
|
|
|
|
/*
|
|
* Purpose : Function pointers used to access above functions - all calls
|
|
* come through these
|
|
*/
|
|
|
|
.type xsc3_processor_functions, #object
|
|
ENTRY(xsc3_processor_functions)
|
|
.word v5t_early_abort
|
|
.word cpu_xsc3_proc_init
|
|
.word cpu_xsc3_proc_fin
|
|
.word cpu_xsc3_reset
|
|
.word cpu_xsc3_do_idle
|
|
.word cpu_xsc3_dcache_clean_area
|
|
.word cpu_xsc3_switch_mm
|
|
.word cpu_xsc3_set_pte
|
|
.size xsc3_processor_functions, . - xsc3_processor_functions
|
|
|
|
.section ".rodata"
|
|
|
|
.type cpu_arch_name, #object
|
|
cpu_arch_name:
|
|
.asciz "armv5te"
|
|
.size cpu_arch_name, . - cpu_arch_name
|
|
|
|
.type cpu_elf_name, #object
|
|
cpu_elf_name:
|
|
.asciz "v5"
|
|
.size cpu_elf_name, . - cpu_elf_name
|
|
|
|
.type cpu_xsc3_name, #object
|
|
cpu_xsc3_name:
|
|
.asciz "XScale-Core3"
|
|
.size cpu_xsc3_name, . - cpu_xsc3_name
|
|
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
|
|
.type __xsc3_proc_info,#object
|
|
__xsc3_proc_info:
|
|
.long 0x69056000
|
|
.long 0xffffe000
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_BUFFERABLE | \
|
|
PMD_SECT_CACHEABLE | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
b __xsc3_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
|
|
.long cpu_xsc3_name
|
|
.long xsc3_processor_functions
|
|
.long v4wbi_tlb_fns
|
|
.long xsc3_mc_user_fns
|
|
.long xsc3_cache_fns
|
|
.size __xsc3_proc_info, . - __xsc3_proc_info
|