forked from Minki/linux
af9b70ac00
This patch adds a mixer control which allows the user to switch the Aux playback between the internal Aux jack, Wavetable, and Rear Line-In on Aureon Universe cards. For switching, a PCA9554 (8-line GPIO with I2C interface) and a 74HC4052 (dual 4-way mux/demux) are used. Output 0 and 1 of the PCA9554 are connected to the select pins of the 74HC4052. The I2C interface of the PCA9554 is connected to the card's internal SPI bus which is also used to control the WM8770 and CS8415. SPI and I2C on the same lines... To communicate with the PCA9554 the WM8770 and CS8415 are disabled and an I2C Stop Condition is generated before the Start Condition (needed for synchronisation because other SPI traffic appear to confuse the PCA9554). Then a normal I2C data transfer takes place. Programming must be done ridiculously slow; in theory, 4.7us is the minimum delay time for normal-speed I2C according to the datasheet, but even with 10us switching was unreliable. The Windows driver from Terratec does the programming very slowly, too (checked with an oscilloscope). PCA9554 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/PCA9554_9554A_6.pdf 74HC4052 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/74HC_HCT4052_4.pdf Signed-off-by: Maximilian Rehkopf <otakon@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
---|---|---|
.. | ||
ak4xxx.c | ||
amp.c | ||
amp.h | ||
aureon.c | ||
aureon.h | ||
delta.c | ||
delta.h | ||
envy24ht.h | ||
ews.c | ||
ews.h | ||
hoontech.c | ||
hoontech.h | ||
ice1712.c | ||
ice1712.h | ||
ice1724.c | ||
juli.c | ||
juli.h | ||
Makefile | ||
phase.c | ||
phase.h | ||
pontis.c | ||
pontis.h | ||
prodigy192.c | ||
prodigy192.h | ||
revo.c | ||
revo.h | ||
stac946x.h | ||
vt1720_mobo.c | ||
vt1720_mobo.h |