forked from Minki/linux
ee2f344b33
The ESB2 appears to emit spurious DMA interrupts when configured for native mode and handling ATAPI devices. Stratus were able to pin this bug down and produce a patch. This is a rework which applies the fixup only to the ESB2 (for now). We can apply it to other chips later if the same problem is found. This code has been tested and confirmed to fix the problem on the tested systems. Signed-off-by: Alan Cox <alan@redhat.com> (Most of the hard work done by Stratus however) Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
703 lines
21 KiB
C
703 lines
21 KiB
C
/*
|
|
* linux/drivers/ide/pci/piix.c Version 0.44 March 20, 2003
|
|
*
|
|
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*
|
|
* PIO mode setting function for Intel chipsets.
|
|
* For use instead of BIOS settings.
|
|
*
|
|
* 40-41
|
|
* 42-43
|
|
*
|
|
* 41
|
|
* 43
|
|
*
|
|
* | PIO 0 | c0 | 80 | 0 | piix_tune_drive(drive, 0);
|
|
* | PIO 2 | SW2 | d0 | 90 | 4 | piix_tune_drive(drive, 2);
|
|
* | PIO 3 | MW1 | e1 | a1 | 9 | piix_tune_drive(drive, 3);
|
|
* | PIO 4 | MW2 | e3 | a3 | b | piix_tune_drive(drive, 4);
|
|
*
|
|
* sitre = word40 & 0x4000; primary
|
|
* sitre = word42 & 0x4000; secondary
|
|
*
|
|
* 44 8421|8421 hdd|hdb
|
|
*
|
|
* 48 8421 hdd|hdc|hdb|hda udma enabled
|
|
*
|
|
* 0001 hda
|
|
* 0010 hdb
|
|
* 0100 hdc
|
|
* 1000 hdd
|
|
*
|
|
* 4a 84|21 hdb|hda
|
|
* 4b 84|21 hdd|hdc
|
|
*
|
|
* ata-33/82371AB
|
|
* ata-33/82371EB
|
|
* ata-33/82801AB ata-66/82801AA
|
|
* 00|00 udma 0 00|00 reserved
|
|
* 01|01 udma 1 01|01 udma 3
|
|
* 10|10 udma 2 10|10 udma 4
|
|
* 11|11 reserved 11|11 reserved
|
|
*
|
|
* 54 8421|8421 ata66 drive|ata66 enable
|
|
*
|
|
* pci_read_config_word(HWIF(drive)->pci_dev, 0x40, ®40);
|
|
* pci_read_config_word(HWIF(drive)->pci_dev, 0x42, ®42);
|
|
* pci_read_config_word(HWIF(drive)->pci_dev, 0x44, ®44);
|
|
* pci_read_config_byte(HWIF(drive)->pci_dev, 0x48, ®48);
|
|
* pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, ®4a);
|
|
* pci_read_config_byte(HWIF(drive)->pci_dev, 0x54, ®54);
|
|
*
|
|
* Documentation
|
|
* Publically available from Intel web site. Errata documentation
|
|
* is also publically available. As an aide to anyone hacking on this
|
|
* driver the list of errata that are relevant is below.going back to
|
|
* PIIX4. Older device documentation is now a bit tricky to find.
|
|
*
|
|
* Errata of note:
|
|
*
|
|
* Unfixable
|
|
* PIIX4 errata #9 - Only on ultra obscure hw
|
|
* ICH3 errata #13 - Not observed to affect real hw
|
|
* by Intel
|
|
*
|
|
* Things we must deal with
|
|
* PIIX4 errata #10 - BM IDE hang with non UDMA
|
|
* (must stop/start dma to recover)
|
|
* 440MX errata #15 - As PIIX4 errata #10
|
|
* PIIX4 errata #15 - Must not read control registers
|
|
* during a PIO transfer
|
|
* 440MX errata #13 - As PIIX4 errata #15
|
|
* ICH2 errata #21 - DMA mode 0 doesn't work right
|
|
* ICH0/1 errata #55 - As ICH2 errata #21
|
|
* ICH2 spec c #9 - Extra operations needed to handle
|
|
* drive hotswap [NOT YET SUPPORTED]
|
|
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
|
|
* and must be dword aligned
|
|
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
|
|
*
|
|
* Should have been BIOS fixed:
|
|
* 450NX: errata #19 - DMA hangs on old 450NX
|
|
* 450NX: errata #20 - DMA hangs on old 450NX
|
|
* 450NX: errata #25 - Corruption with DMA on old 450NX
|
|
* ICH3 errata #15 - IDE deadlock under high load
|
|
* (BIOS must set dev 31 fn 0 bit 23)
|
|
* ICH3 errata #18 - Don't use native mode
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
static int no_piix_dma;
|
|
|
|
/**
|
|
* piix_ratemask - compute rate mask for PIIX IDE
|
|
* @drive: IDE drive to compute for
|
|
*
|
|
* Returns the available modes for the PIIX IDE controller.
|
|
*/
|
|
|
|
static u8 piix_ratemask (ide_drive_t *drive)
|
|
{
|
|
struct pci_dev *dev = HWIF(drive)->pci_dev;
|
|
u8 mode;
|
|
|
|
switch(dev->device) {
|
|
case PCI_DEVICE_ID_INTEL_82801EB_1:
|
|
mode = 3;
|
|
break;
|
|
/* UDMA 100 capable */
|
|
case PCI_DEVICE_ID_INTEL_82801BA_8:
|
|
case PCI_DEVICE_ID_INTEL_82801BA_9:
|
|
case PCI_DEVICE_ID_INTEL_82801CA_10:
|
|
case PCI_DEVICE_ID_INTEL_82801CA_11:
|
|
case PCI_DEVICE_ID_INTEL_82801E_11:
|
|
case PCI_DEVICE_ID_INTEL_82801DB_1:
|
|
case PCI_DEVICE_ID_INTEL_82801DB_10:
|
|
case PCI_DEVICE_ID_INTEL_82801DB_11:
|
|
case PCI_DEVICE_ID_INTEL_82801EB_11:
|
|
case PCI_DEVICE_ID_INTEL_ESB_2:
|
|
case PCI_DEVICE_ID_INTEL_ICH6_19:
|
|
case PCI_DEVICE_ID_INTEL_ICH7_21:
|
|
case PCI_DEVICE_ID_INTEL_ESB2_18:
|
|
case PCI_DEVICE_ID_INTEL_ICH8_6:
|
|
mode = 3;
|
|
break;
|
|
/* UDMA 66 capable */
|
|
case PCI_DEVICE_ID_INTEL_82801AA_1:
|
|
case PCI_DEVICE_ID_INTEL_82372FB_1:
|
|
mode = 2;
|
|
break;
|
|
/* UDMA 33 capable */
|
|
case PCI_DEVICE_ID_INTEL_82371AB:
|
|
case PCI_DEVICE_ID_INTEL_82443MX_1:
|
|
case PCI_DEVICE_ID_INTEL_82451NX:
|
|
case PCI_DEVICE_ID_INTEL_82801AB_1:
|
|
return 1;
|
|
/* Non UDMA capable (MWDMA2) */
|
|
case PCI_DEVICE_ID_INTEL_82371SB_1:
|
|
case PCI_DEVICE_ID_INTEL_82371FB_1:
|
|
case PCI_DEVICE_ID_INTEL_82371FB_0:
|
|
case PCI_DEVICE_ID_INTEL_82371MX:
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we are UDMA66 capable fall back to UDMA33
|
|
* if the drive cannot see an 80pin cable.
|
|
*/
|
|
if (!eighty_ninty_three(drive))
|
|
mode = min(mode, (u8)1);
|
|
return mode;
|
|
}
|
|
|
|
/**
|
|
* piix_dma_2_pio - return the PIO mode matching DMA
|
|
* @xfer_rate: transfer speed
|
|
*
|
|
* Returns the nearest equivalent PIO timing for the PIO or DMA
|
|
* mode requested by the controller.
|
|
*/
|
|
|
|
static u8 piix_dma_2_pio (u8 xfer_rate) {
|
|
switch(xfer_rate) {
|
|
case XFER_UDMA_6:
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_4:
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_2:
|
|
case XFER_UDMA_1:
|
|
case XFER_UDMA_0:
|
|
case XFER_MW_DMA_2:
|
|
case XFER_PIO_4:
|
|
return 4;
|
|
case XFER_MW_DMA_1:
|
|
case XFER_PIO_3:
|
|
return 3;
|
|
case XFER_SW_DMA_2:
|
|
case XFER_PIO_2:
|
|
return 2;
|
|
case XFER_MW_DMA_0:
|
|
case XFER_SW_DMA_1:
|
|
case XFER_SW_DMA_0:
|
|
case XFER_PIO_1:
|
|
case XFER_PIO_0:
|
|
case XFER_PIO_SLOW:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* piix_tune_drive - tune a drive attached to a PIIX
|
|
* @drive: drive to tune
|
|
* @pio: desired PIO mode
|
|
*
|
|
* Set the interface PIO mode based upon the settings done by AMI BIOS
|
|
* (might be useful if drive is not registered in CMOS for any reason).
|
|
*/
|
|
static void piix_tune_drive (ide_drive_t *drive, u8 pio)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
int is_slave = (&hwif->drives[1] == drive);
|
|
int master_port = hwif->channel ? 0x42 : 0x40;
|
|
int slave_port = 0x44;
|
|
unsigned long flags;
|
|
u16 master_data;
|
|
u8 slave_data;
|
|
static DEFINE_SPINLOCK(tune_lock);
|
|
int control = 0;
|
|
|
|
/* ISP RTC */
|
|
static const u8 timings[][2]= {
|
|
{ 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
|
|
|
|
/*
|
|
* Master vs slave is synchronized above us but the slave register is
|
|
* shared by the two hwifs so the corner case of two slave timeouts in
|
|
* parallel must be locked.
|
|
*/
|
|
spin_lock_irqsave(&tune_lock, flags);
|
|
pci_read_config_word(dev, master_port, &master_data);
|
|
|
|
if (pio >= 2)
|
|
control |= 1; /* Programmable timing on */
|
|
if (drive->media == ide_disk)
|
|
control |= 4; /* Prefetch, post write */
|
|
if (pio >= 3)
|
|
control |= 2; /* IORDY */
|
|
if (is_slave) {
|
|
master_data = master_data | 0x4000;
|
|
if (pio > 1) {
|
|
/* enable PPE, IE and TIME */
|
|
master_data = master_data | (control << 4);
|
|
} else {
|
|
master_data &= ~0x0070;
|
|
}
|
|
pci_read_config_byte(dev, slave_port, &slave_data);
|
|
slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
|
|
slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
|
|
} else {
|
|
master_data = master_data & 0xccf8;
|
|
if (pio > 1) {
|
|
/* enable PPE, IE and TIME */
|
|
master_data = master_data | control;
|
|
}
|
|
master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
}
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
if (is_slave)
|
|
pci_write_config_byte(dev, slave_port, slave_data);
|
|
spin_unlock_irqrestore(&tune_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* piix_tune_chipset - tune a PIIX interface
|
|
* @drive: IDE drive to tune
|
|
* @xferspeed: speed to configure
|
|
*
|
|
* Set a PIIX interface channel to the desired speeds. This involves
|
|
* requires the right timing data into the PIIX configuration space
|
|
* then setting the drive parameters appropriately
|
|
*/
|
|
|
|
static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
u8 maslave = hwif->channel ? 0x42 : 0x40;
|
|
u8 speed = ide_rate_filter(piix_ratemask(drive), xferspeed);
|
|
int a_speed = 3 << (drive->dn * 4);
|
|
int u_flag = 1 << drive->dn;
|
|
int v_flag = 0x01 << drive->dn;
|
|
int w_flag = 0x10 << drive->dn;
|
|
int u_speed = 0;
|
|
int sitre;
|
|
u16 reg4042, reg4a;
|
|
u8 reg48, reg54, reg55;
|
|
|
|
pci_read_config_word(dev, maslave, ®4042);
|
|
sitre = (reg4042 & 0x4000) ? 1 : 0;
|
|
pci_read_config_byte(dev, 0x48, ®48);
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
pci_read_config_byte(dev, 0x54, ®54);
|
|
pci_read_config_byte(dev, 0x55, ®55);
|
|
|
|
switch(speed) {
|
|
case XFER_UDMA_4:
|
|
case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
|
|
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
|
|
case XFER_MW_DMA_2:
|
|
case XFER_MW_DMA_1:
|
|
case XFER_SW_DMA_2: break;
|
|
case XFER_PIO_4:
|
|
case XFER_PIO_3:
|
|
case XFER_PIO_2:
|
|
case XFER_PIO_0: break;
|
|
default: return -1;
|
|
}
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
|
if (!(reg48 & u_flag))
|
|
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
|
|
if (speed == XFER_UDMA_5) {
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
|
|
} else {
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
|
|
}
|
|
if ((reg4a & a_speed) != u_speed)
|
|
pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
|
|
if (speed > XFER_UDMA_2) {
|
|
if (!(reg54 & v_flag))
|
|
pci_write_config_byte(dev, 0x54, reg54 | v_flag);
|
|
} else
|
|
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
|
} else {
|
|
if (reg48 & u_flag)
|
|
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
|
|
if (reg4a & a_speed)
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
if (reg54 & v_flag)
|
|
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
|
if (reg55 & w_flag)
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
|
|
}
|
|
|
|
piix_tune_drive(drive, piix_dma_2_pio(speed));
|
|
return (ide_config_drive_speed(drive, speed));
|
|
}
|
|
|
|
/**
|
|
* piix_faulty_dma0 - check for DMA0 errata
|
|
* @hwif: IDE interface to check
|
|
*
|
|
* If an ICH/ICH0/ICH2 interface is is operating in multi-word
|
|
* DMA mode with 600nS cycle time the IDE PIO prefetch buffer will
|
|
* inadvertently provide an extra piece of secondary data to the primary
|
|
* device resulting in data corruption.
|
|
*
|
|
* With such a device this test function returns true. This allows
|
|
* our tuning code to follow Intel recommendations and use PIO on
|
|
* such devices.
|
|
*/
|
|
|
|
static int piix_faulty_dma0(ide_hwif_t *hwif)
|
|
{
|
|
switch(hwif->pci_dev->device)
|
|
{
|
|
case PCI_DEVICE_ID_INTEL_82801AA_1: /* ICH */
|
|
case PCI_DEVICE_ID_INTEL_82801AB_1: /* ICH0 */
|
|
case PCI_DEVICE_ID_INTEL_82801BA_8: /* ICH2 */
|
|
case PCI_DEVICE_ID_INTEL_82801BA_9: /* ICH2 */
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* piix_config_drive_for_dma - configure drive for DMA
|
|
* @drive: IDE drive to configure
|
|
*
|
|
* Set up a PIIX interface channel for the best available speed.
|
|
* We prefer UDMA if it is available and then MWDMA. If DMA is
|
|
* not available we switch to PIO and return 0.
|
|
*/
|
|
|
|
static int piix_config_drive_for_dma (ide_drive_t *drive)
|
|
{
|
|
u8 speed = ide_dma_speed(drive, piix_ratemask(drive));
|
|
|
|
/* Some ICH devices cannot support DMA mode 0 */
|
|
if(speed == XFER_MW_DMA_0 && piix_faulty_dma0(HWIF(drive)))
|
|
speed = 0;
|
|
|
|
/* If no DMA speed was available or the chipset has DMA bugs
|
|
then disable DMA and use PIO */
|
|
|
|
if (!speed || no_piix_dma) {
|
|
u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
|
|
speed = piix_dma_2_pio(XFER_PIO_0 + tspeed);
|
|
}
|
|
|
|
(void) piix_tune_chipset(drive, speed);
|
|
return ide_dma_enable(drive);
|
|
}
|
|
|
|
/**
|
|
* piix_config_drive_xfer_rate - set up an IDE device
|
|
* @drive: IDE drive to configure
|
|
*
|
|
* Set up the PIIX interface for the best available speed on this
|
|
* interface, preferring DMA to PIO.
|
|
*/
|
|
|
|
static int piix_config_drive_xfer_rate (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
drive->init_speed = 0;
|
|
|
|
if ((id->capability & 1) && drive->autodma) {
|
|
|
|
if (ide_use_dma(drive)) {
|
|
if (piix_config_drive_for_dma(drive))
|
|
return hwif->ide_dma_on(drive);
|
|
}
|
|
|
|
goto fast_ata_pio;
|
|
|
|
} else if ((id->capability & 8) || (id->field_valid & 2)) {
|
|
fast_ata_pio:
|
|
/* Find best PIO mode. */
|
|
hwif->tuneproc(drive, 255);
|
|
return hwif->ide_dma_off_quietly(drive);
|
|
}
|
|
/* IORDY not supported */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* init_chipset_piix - set up the PIIX chipset
|
|
* @dev: PCI device to set up
|
|
* @name: Name of the device
|
|
*
|
|
* Initialize the PCI device as required. For the PIIX this turns
|
|
* out to be nice and simple
|
|
*/
|
|
|
|
static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char *name)
|
|
{
|
|
switch(dev->device) {
|
|
case PCI_DEVICE_ID_INTEL_82801EB_1:
|
|
case PCI_DEVICE_ID_INTEL_82801AA_1:
|
|
case PCI_DEVICE_ID_INTEL_82801AB_1:
|
|
case PCI_DEVICE_ID_INTEL_82801BA_8:
|
|
case PCI_DEVICE_ID_INTEL_82801BA_9:
|
|
case PCI_DEVICE_ID_INTEL_82801CA_10:
|
|
case PCI_DEVICE_ID_INTEL_82801CA_11:
|
|
case PCI_DEVICE_ID_INTEL_82801DB_1:
|
|
case PCI_DEVICE_ID_INTEL_82801DB_10:
|
|
case PCI_DEVICE_ID_INTEL_82801DB_11:
|
|
case PCI_DEVICE_ID_INTEL_82801EB_11:
|
|
case PCI_DEVICE_ID_INTEL_82801E_11:
|
|
case PCI_DEVICE_ID_INTEL_ESB_2:
|
|
case PCI_DEVICE_ID_INTEL_ICH6_19:
|
|
case PCI_DEVICE_ID_INTEL_ICH7_21:
|
|
case PCI_DEVICE_ID_INTEL_ESB2_18:
|
|
case PCI_DEVICE_ID_INTEL_ICH8_6:
|
|
{
|
|
unsigned int extra = 0;
|
|
pci_read_config_dword(dev, 0x54, &extra);
|
|
pci_write_config_dword(dev, 0x54, extra|0x400);
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* init_hwif_piix - fill in the hwif for the PIIX
|
|
* @hwif: IDE interface
|
|
*
|
|
* Set up the ide_hwif_t for the PIIX interface according to the
|
|
* capabilities of the hardware.
|
|
*/
|
|
|
|
static void __devinit init_hwif_piix(ide_hwif_t *hwif)
|
|
{
|
|
u8 reg54h = 0, reg55h = 0, ata66 = 0;
|
|
u8 mask = hwif->channel ? 0xc0 : 0x30;
|
|
|
|
#ifndef CONFIG_IA64
|
|
if (!hwif->irq)
|
|
hwif->irq = hwif->channel ? 15 : 14;
|
|
#endif /* CONFIG_IA64 */
|
|
|
|
if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_82371MX) {
|
|
/* This is a painful system best to let it self tune for now */
|
|
return;
|
|
}
|
|
/* ESB2 appears to generate spurious DMA interrupts in PIO mode
|
|
when in native mode */
|
|
if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_ESB2_18)
|
|
hwif->atapi_irq_bogon = 1;
|
|
|
|
hwif->autodma = 0;
|
|
hwif->tuneproc = &piix_tune_drive;
|
|
hwif->speedproc = &piix_tune_chipset;
|
|
hwif->drives[0].autotune = 1;
|
|
hwif->drives[1].autotune = 1;
|
|
|
|
if (!hwif->dma_base)
|
|
return;
|
|
|
|
hwif->atapi_dma = 1;
|
|
hwif->ultra_mask = 0x3f;
|
|
hwif->mwdma_mask = 0x06;
|
|
hwif->swdma_mask = 0x04;
|
|
|
|
switch(hwif->pci_dev->device) {
|
|
case PCI_DEVICE_ID_INTEL_82371MX:
|
|
hwif->mwdma_mask = 0x80;
|
|
hwif->swdma_mask = 0x80;
|
|
case PCI_DEVICE_ID_INTEL_82371FB_0:
|
|
case PCI_DEVICE_ID_INTEL_82371FB_1:
|
|
case PCI_DEVICE_ID_INTEL_82371SB_1:
|
|
hwif->ultra_mask = 0x80;
|
|
break;
|
|
case PCI_DEVICE_ID_INTEL_82371AB:
|
|
case PCI_DEVICE_ID_INTEL_82443MX_1:
|
|
case PCI_DEVICE_ID_INTEL_82451NX:
|
|
case PCI_DEVICE_ID_INTEL_82801AB_1:
|
|
hwif->ultra_mask = 0x07;
|
|
break;
|
|
default:
|
|
pci_read_config_byte(hwif->pci_dev, 0x54, ®54h);
|
|
pci_read_config_byte(hwif->pci_dev, 0x55, ®55h);
|
|
ata66 = (reg54h & mask) ? 1 : 0;
|
|
break;
|
|
}
|
|
|
|
if (!(hwif->udma_four))
|
|
hwif->udma_four = ata66;
|
|
hwif->ide_dma_check = &piix_config_drive_xfer_rate;
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
}
|
|
|
|
#define DECLARE_PIIX_DEV(name_str) \
|
|
{ \
|
|
.name = name_str, \
|
|
.init_chipset = init_chipset_piix, \
|
|
.init_hwif = init_hwif_piix, \
|
|
.channels = 2, \
|
|
.autodma = AUTODMA, \
|
|
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
|
|
.bootable = ON_BOARD, \
|
|
}
|
|
|
|
static ide_pci_device_t piix_pci_info[] __devinitdata = {
|
|
/* 0 */ DECLARE_PIIX_DEV("PIIXa"),
|
|
/* 1 */ DECLARE_PIIX_DEV("PIIXb"),
|
|
|
|
{ /* 2 */
|
|
.name = "MPIIX",
|
|
.init_hwif = init_hwif_piix,
|
|
.channels = 2,
|
|
.autodma = NODMA,
|
|
.enablebits = {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}},
|
|
.bootable = ON_BOARD,
|
|
},
|
|
|
|
/* 3 */ DECLARE_PIIX_DEV("PIIX3"),
|
|
/* 4 */ DECLARE_PIIX_DEV("PIIX4"),
|
|
/* 5 */ DECLARE_PIIX_DEV("ICH0"),
|
|
/* 6 */ DECLARE_PIIX_DEV("PIIX4"),
|
|
/* 7 */ DECLARE_PIIX_DEV("ICH"),
|
|
/* 8 */ DECLARE_PIIX_DEV("PIIX4"),
|
|
/* 9 */ DECLARE_PIIX_DEV("PIIX4"),
|
|
/* 10 */ DECLARE_PIIX_DEV("ICH2"),
|
|
/* 11 */ DECLARE_PIIX_DEV("ICH2M"),
|
|
/* 12 */ DECLARE_PIIX_DEV("ICH3M"),
|
|
/* 13 */ DECLARE_PIIX_DEV("ICH3"),
|
|
/* 14 */ DECLARE_PIIX_DEV("ICH4"),
|
|
/* 15 */ DECLARE_PIIX_DEV("ICH5"),
|
|
/* 16 */ DECLARE_PIIX_DEV("C-ICH"),
|
|
/* 17 */ DECLARE_PIIX_DEV("ICH4"),
|
|
/* 18 */ DECLARE_PIIX_DEV("ICH5-SATA"),
|
|
/* 19 */ DECLARE_PIIX_DEV("ICH5"),
|
|
/* 20 */ DECLARE_PIIX_DEV("ICH6"),
|
|
/* 21 */ DECLARE_PIIX_DEV("ICH7"),
|
|
/* 22 */ DECLARE_PIIX_DEV("ICH4"),
|
|
/* 23 */ DECLARE_PIIX_DEV("ESB2"),
|
|
/* 24 */ DECLARE_PIIX_DEV("ICH8M"),
|
|
};
|
|
|
|
/**
|
|
* piix_init_one - called when a PIIX is found
|
|
* @dev: the piix device
|
|
* @id: the matching pci id
|
|
*
|
|
* Called when the PCI registration layer (or the IDE initialization)
|
|
* finds a device matching our IDE device tables.
|
|
*/
|
|
|
|
static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
ide_pci_device_t *d = &piix_pci_info[id->driver_data];
|
|
|
|
return ide_setup_pci_device(dev, d);
|
|
}
|
|
|
|
/**
|
|
* piix_check_450nx - Check for problem 450NX setup
|
|
*
|
|
* Check for the present of 450NX errata #19 and errata #25. If
|
|
* they are found, disable use of DMA IDE
|
|
*/
|
|
|
|
static void __devinit piix_check_450nx(void)
|
|
{
|
|
struct pci_dev *pdev = NULL;
|
|
u16 cfg;
|
|
u8 rev;
|
|
while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
|
|
{
|
|
/* Look for 450NX PXB. Check for problem configurations
|
|
A PCI quirk checks bit 6 already */
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
|
|
pci_read_config_word(pdev, 0x41, &cfg);
|
|
/* Only on the original revision: IDE DMA can hang */
|
|
if(rev == 0x00)
|
|
no_piix_dma = 1;
|
|
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
|
|
else if(cfg & (1<<14) && rev < 5)
|
|
no_piix_dma = 2;
|
|
}
|
|
if(no_piix_dma)
|
|
printk(KERN_WARNING "piix: 450NX errata present, disabling IDE DMA.\n");
|
|
if(no_piix_dma == 2)
|
|
printk(KERN_WARNING "piix: A BIOS update may resolve this.\n");
|
|
}
|
|
|
|
static struct pci_device_id piix_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82372FB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_10,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
|
|
#ifdef CONFIG_BLK_DEV_IDE_SATA
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
|
|
#endif
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_19, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 23},
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 24},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "PIIX_IDE",
|
|
.id_table = piix_pci_tbl,
|
|
.probe = piix_init_one,
|
|
};
|
|
|
|
static int __init piix_ide_init(void)
|
|
{
|
|
piix_check_450nx();
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(piix_ide_init);
|
|
|
|
MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz");
|
|
MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE");
|
|
MODULE_LICENSE("GPL");
|