forked from Minki/linux
05359be117
The A83T clock control unit is a hybrid of some new style clock designs from the A80, and old style layout from the other Allwinner SoCs. Like the A80, the SoC does not have a low speed 32.768 kHz oscillator. Unlike the A80, there is no clock input either. The only low speed clock available is the internal oscillator which runs at around 16 MHz, divided by 512, yielding a low speed clock around 31.250 kHz. Also, the MMC2 module clock supports switching to a "new timing" mode. This mode divides the clock output by half, and disables the CCU based clock delays. The MMC controller must be configure to the same mode, and then use its internal clock delays. This driver does not support runtime switching of the timing modes. Instead, the new timing mode is enforced at probe time. Consumers can check which mode is active by trying to get the current phase delay of the MMC2 phase clocks, which will return -ENOTSUPP if the new timing mode is active. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
99 lines
3.2 KiB
C
99 lines
3.2 KiB
C
/*
|
|
* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _DT_BINDINGS_RESET_SUN8I_A83T_CCU_H_
|
|
#define _DT_BINDINGS_RESET_SUN8I_A83T_CCU_H_
|
|
|
|
#define RST_USB_PHY0 0
|
|
#define RST_USB_PHY1 1
|
|
#define RST_USB_HSIC 2
|
|
|
|
#define RST_DRAM 3
|
|
#define RST_MBUS 4
|
|
|
|
#define RST_BUS_MIPI_DSI 5
|
|
#define RST_BUS_SS 6
|
|
#define RST_BUS_DMA 7
|
|
#define RST_BUS_MMC0 8
|
|
#define RST_BUS_MMC1 9
|
|
#define RST_BUS_MMC2 10
|
|
#define RST_BUS_NAND 11
|
|
#define RST_BUS_DRAM 12
|
|
#define RST_BUS_EMAC 13
|
|
#define RST_BUS_HSTIMER 14
|
|
#define RST_BUS_SPI0 15
|
|
#define RST_BUS_SPI1 16
|
|
#define RST_BUS_OTG 17
|
|
#define RST_BUS_EHCI0 18
|
|
#define RST_BUS_EHCI1 19
|
|
#define RST_BUS_OHCI0 20
|
|
|
|
#define RST_BUS_VE 21
|
|
#define RST_BUS_TCON0 22
|
|
#define RST_BUS_TCON1 23
|
|
#define RST_BUS_CSI 24
|
|
#define RST_BUS_HDMI0 25
|
|
#define RST_BUS_HDMI1 26
|
|
#define RST_BUS_DE 27
|
|
#define RST_BUS_GPU 28
|
|
#define RST_BUS_MSGBOX 29
|
|
#define RST_BUS_SPINLOCK 30
|
|
|
|
#define RST_BUS_LVDS 31
|
|
|
|
#define RST_BUS_SPDIF 32
|
|
#define RST_BUS_I2S0 33
|
|
#define RST_BUS_I2S1 34
|
|
#define RST_BUS_I2S2 35
|
|
#define RST_BUS_TDM 36
|
|
|
|
#define RST_BUS_I2C0 37
|
|
#define RST_BUS_I2C1 38
|
|
#define RST_BUS_I2C2 39
|
|
#define RST_BUS_UART0 40
|
|
#define RST_BUS_UART1 41
|
|
#define RST_BUS_UART2 42
|
|
#define RST_BUS_UART3 43
|
|
#define RST_BUS_UART4 44
|
|
|
|
#endif /* _DT_BINDINGS_RESET_SUN8I_A83T_CCU_H_ */
|