forked from Minki/linux
035cd485a4
The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by: Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
287 lines
7.8 KiB
C
287 lines
7.8 KiB
C
/*
|
|
* TI Clock driver internal definitions
|
|
*
|
|
* Copyright (C) 2014 Texas Instruments, Inc
|
|
* Tero Kristo (t-kristo@ti.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#ifndef __DRIVERS_CLK_TI_CLOCK__
|
|
#define __DRIVERS_CLK_TI_CLOCK__
|
|
|
|
enum {
|
|
TI_CLK_FIXED,
|
|
TI_CLK_MUX,
|
|
TI_CLK_DIVIDER,
|
|
TI_CLK_COMPOSITE,
|
|
TI_CLK_FIXED_FACTOR,
|
|
TI_CLK_GATE,
|
|
TI_CLK_DPLL,
|
|
};
|
|
|
|
/* Global flags */
|
|
#define CLKF_INDEX_POWER_OF_TWO (1 << 0)
|
|
#define CLKF_INDEX_STARTS_AT_ONE (1 << 1)
|
|
#define CLKF_SET_RATE_PARENT (1 << 2)
|
|
#define CLKF_OMAP3 (1 << 3)
|
|
#define CLKF_AM35XX (1 << 4)
|
|
|
|
/* Gate flags */
|
|
#define CLKF_SET_BIT_TO_DISABLE (1 << 5)
|
|
#define CLKF_INTERFACE (1 << 6)
|
|
#define CLKF_SSI (1 << 7)
|
|
#define CLKF_DSS (1 << 8)
|
|
#define CLKF_HSOTGUSB (1 << 9)
|
|
#define CLKF_WAIT (1 << 10)
|
|
#define CLKF_NO_WAIT (1 << 11)
|
|
#define CLKF_HSDIV (1 << 12)
|
|
#define CLKF_CLKDM (1 << 13)
|
|
|
|
/* DPLL flags */
|
|
#define CLKF_LOW_POWER_STOP (1 << 5)
|
|
#define CLKF_LOCK (1 << 6)
|
|
#define CLKF_LOW_POWER_BYPASS (1 << 7)
|
|
#define CLKF_PER (1 << 8)
|
|
#define CLKF_CORE (1 << 9)
|
|
#define CLKF_J_TYPE (1 << 10)
|
|
|
|
#define CLK(dev, con, ck) \
|
|
{ \
|
|
.lk = { \
|
|
.dev_id = dev, \
|
|
.con_id = con, \
|
|
}, \
|
|
.clk = ck, \
|
|
}
|
|
|
|
struct ti_clk {
|
|
const char *name;
|
|
const char *clkdm_name;
|
|
int type;
|
|
void *data;
|
|
struct ti_clk *patch;
|
|
struct clk *clk;
|
|
};
|
|
|
|
struct ti_clk_alias {
|
|
struct ti_clk *clk;
|
|
struct clk_lookup lk;
|
|
struct list_head link;
|
|
};
|
|
|
|
struct ti_clk_fixed {
|
|
u32 frequency;
|
|
u16 flags;
|
|
};
|
|
|
|
struct ti_clk_mux {
|
|
u8 bit_shift;
|
|
int num_parents;
|
|
u16 reg;
|
|
u8 module;
|
|
const char **parents;
|
|
u16 flags;
|
|
};
|
|
|
|
struct ti_clk_divider {
|
|
const char *parent;
|
|
u8 bit_shift;
|
|
u16 max_div;
|
|
u16 reg;
|
|
u8 module;
|
|
int *dividers;
|
|
int num_dividers;
|
|
u16 flags;
|
|
};
|
|
|
|
struct ti_clk_fixed_factor {
|
|
const char *parent;
|
|
u16 div;
|
|
u16 mult;
|
|
u16 flags;
|
|
};
|
|
|
|
struct ti_clk_gate {
|
|
const char *parent;
|
|
u8 bit_shift;
|
|
u16 reg;
|
|
u8 module;
|
|
u16 flags;
|
|
};
|
|
|
|
struct ti_clk_composite {
|
|
struct ti_clk_divider *divider;
|
|
struct ti_clk_mux *mux;
|
|
struct ti_clk_gate *gate;
|
|
u16 flags;
|
|
};
|
|
|
|
struct ti_clk_clkdm_gate {
|
|
const char *parent;
|
|
u16 flags;
|
|
};
|
|
|
|
struct ti_clk_dpll {
|
|
int num_parents;
|
|
u16 control_reg;
|
|
u16 idlest_reg;
|
|
u16 autoidle_reg;
|
|
u16 mult_div1_reg;
|
|
u8 module;
|
|
const char **parents;
|
|
u16 flags;
|
|
u8 modes;
|
|
u32 mult_mask;
|
|
u32 div1_mask;
|
|
u32 enable_mask;
|
|
u32 autoidle_mask;
|
|
u32 freqsel_mask;
|
|
u32 idlest_mask;
|
|
u32 dco_mask;
|
|
u32 sddiv_mask;
|
|
u16 max_multiplier;
|
|
u16 max_divider;
|
|
u8 min_divider;
|
|
u8 auto_recal_bit;
|
|
u8 recal_en_bit;
|
|
u8 recal_st_bit;
|
|
};
|
|
|
|
/* Composite clock component types */
|
|
enum {
|
|
CLK_COMPONENT_TYPE_GATE = 0,
|
|
CLK_COMPONENT_TYPE_DIVIDER,
|
|
CLK_COMPONENT_TYPE_MUX,
|
|
CLK_COMPONENT_TYPE_MAX,
|
|
};
|
|
|
|
/**
|
|
* struct ti_dt_clk - OMAP DT clock alias declarations
|
|
* @lk: clock lookup definition
|
|
* @node_name: clock DT node to map to
|
|
*/
|
|
struct ti_dt_clk {
|
|
struct clk_lookup lk;
|
|
char *node_name;
|
|
};
|
|
|
|
#define DT_CLK(dev, con, name) \
|
|
{ \
|
|
.lk = { \
|
|
.dev_id = dev, \
|
|
.con_id = con, \
|
|
}, \
|
|
.node_name = name, \
|
|
}
|
|
|
|
typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
|
|
|
|
struct clk *ti_clk_register_gate(struct ti_clk *setup);
|
|
struct clk *ti_clk_register_interface(struct ti_clk *setup);
|
|
struct clk *ti_clk_register_mux(struct ti_clk *setup);
|
|
struct clk *ti_clk_register_divider(struct ti_clk *setup);
|
|
struct clk *ti_clk_register_composite(struct ti_clk *setup);
|
|
struct clk *ti_clk_register_dpll(struct ti_clk *setup);
|
|
|
|
struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup);
|
|
struct clk_hw *ti_clk_build_component_gate(struct ti_clk_gate *setup);
|
|
struct clk_hw *ti_clk_build_component_mux(struct ti_clk_mux *setup);
|
|
|
|
void ti_clk_patch_legacy_clks(struct ti_clk **patch);
|
|
struct clk *ti_clk_register_clk(struct ti_clk *setup);
|
|
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
|
|
|
|
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
|
|
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
|
|
int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
|
|
ti_of_clk_init_cb_t func);
|
|
int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
|
|
|
|
void omap2_init_clk_hw_omap_clocks(struct clk_hw *hw);
|
|
int of_ti_clk_autoidle_setup(struct device_node *node);
|
|
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
|
|
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
|
|
extern const struct clk_hw_omap_ops clkhwops_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_iclk;
|
|
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
|
|
|
|
extern const struct clk_ops ti_clk_divider_ops;
|
|
extern const struct clk_ops ti_clk_mux_ops;
|
|
|
|
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
|
|
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
|
|
|
|
int omap2_dflt_clk_enable(struct clk_hw *hw);
|
|
void omap2_dflt_clk_disable(struct clk_hw *hw);
|
|
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
|
|
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
|
|
void __iomem **other_reg,
|
|
u8 *other_bit);
|
|
void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
|
|
void __iomem **idlest_reg,
|
|
u8 *idlest_bit, u8 *idlest_val);
|
|
|
|
void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
|
|
void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
|
|
|
|
u8 omap2_init_dpll_parent(struct clk_hw *hw);
|
|
int omap3_noncore_dpll_enable(struct clk_hw *hw);
|
|
void omap3_noncore_dpll_disable(struct clk_hw *hw);
|
|
int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
|
|
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
|
|
unsigned long rate,
|
|
unsigned long parent_rate,
|
|
u8 index);
|
|
int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req);
|
|
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
|
|
unsigned long *parent_rate);
|
|
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
|
|
unsigned long parent_rate);
|
|
|
|
/*
|
|
* OMAP3_DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
|
|
* that are sourced by DPLL5, and both of these require this clock
|
|
* to be at 120 MHz for proper operation.
|
|
*/
|
|
#define OMAP3_DPLL5_FREQ_FOR_USBHOST 120000000
|
|
|
|
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
|
|
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate, u8 index);
|
|
int omap3_dpll5_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
void omap3_clk_lock_dpll5(void);
|
|
|
|
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
|
|
unsigned long parent_rate);
|
|
long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
|
|
unsigned long target_rate,
|
|
unsigned long *parent_rate);
|
|
int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req);
|
|
|
|
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
|
|
|
|
#endif
|