forked from Minki/linux
7230c56441
The current implementation of lazy interrupts handling has some issues that this tries to address. We don't do the various workarounds we need to do when re-enabling interrupts in some cases such as when returning from an interrupt and thus we may still lose or get delayed decrementer or doorbell interrupts. The current scheme also makes it much harder to handle the external "edge" interrupts provided by some BookE processors when using the EPR facility (External Proxy) and the Freescale Hypervisor. Additionally, we tend to keep interrupts hard disabled in a number of cases, such as decrementer interrupts, external interrupts, or when a masked decrementer interrupt is pending. This is sub-optimal. This is an attempt at fixing it all in one go by reworking the way we do the lazy interrupt disabling from the ground up. The base idea is to replace the "hard_enabled" field with a "irq_happened" field in which we store a bit mask of what interrupt occurred while soft-disabled. When re-enabling, either via arch_local_irq_restore() or when returning from an interrupt, we can now decide what to do by testing bits in that field. We then implement replaying of the missed interrupts either by re-using the existing exception frame (in exception exit case) or via the creation of a new one from an assembly trampoline (in the arch_local_irq_enable case). This removes the need to play with the decrementer to try to create fake interrupts, among others. In addition, this adds a few refinements: - We no longer hard disable decrementer interrupts that occur while soft-disabled. We now simply bump the decrementer back to max (on BookS) or leave it stopped (on BookE) and continue with hard interrupts enabled, which means that we'll potentially get better sample quality from performance monitor interrupts. - Timer, decrementer and doorbell interrupts now hard-enable shortly after removing the source of the interrupt, which means they no longer run entirely hard disabled. Again, this will improve perf sample quality. - On Book3E 64-bit, we now make the performance monitor interrupt act as an NMI like Book3S (the necessary C code for that to work appear to already be present in the FSL perf code, notably calling nmi_enter instead of irq_enter). (This also fixes a bug where BookE perfmon interrupts could clobber r14 ... oops) - We could make "masked" decrementer interrupts act as NMIs when doing timer-based perf sampling to improve the sample quality. Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- v2: - Add hard-enable to decrementer, timer and doorbells - Fix CR clobber in masked irq handling on BookE - Make embedded perf interrupt act as an NMI - Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want to retrigger an interrupt without preventing hard-enable v3: - Fix or vs. ori bug on Book3E - Fix enabling of interrupts for some exceptions on Book3E v4: - Fix resend of doorbells on return from interrupt on Book3E v5: - Rebased on top of my latest series, which involves some significant rework of some aspects of the patch. v6: - 32-bit compile fix - more compile fixes with various .config combos - factor out the asm code to soft-disable interrupts - remove the C wrapper around preempt_schedule_irq v7: - Fix a bug with hard irq state tracking on native power7
117 lines
2.5 KiB
ArmAsm
117 lines
2.5 KiB
ArmAsm
/*
|
|
* This file contains the power_save function for Power7 CPUs.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/threads.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/ppc-opcode.h>
|
|
#include <asm/hw_irq.h>
|
|
|
|
#undef DEBUG
|
|
|
|
.text
|
|
|
|
_GLOBAL(power7_idle)
|
|
/* Now check if user or arch enabled NAP mode */
|
|
LOAD_REG_ADDRBASE(r3,powersave_nap)
|
|
lwz r4,ADDROFF(powersave_nap)(r3)
|
|
cmpwi 0,r4,0
|
|
beqlr
|
|
|
|
/* NAP is a state loss, we create a regs frame on the
|
|
* stack, fill it up with the state we care about and
|
|
* stick a pointer to it in PACAR1. We really only
|
|
* need to save PC, some CR bits and the NV GPRs,
|
|
* but for now an interrupt frame will do.
|
|
*/
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,-INT_FRAME_SIZE(r1)
|
|
std r0,_LINK(r1)
|
|
std r0,_NIP(r1)
|
|
|
|
#ifndef CONFIG_SMP
|
|
/* Make sure FPU, VSX etc... are flushed as we may lose
|
|
* state when going to nap mode
|
|
*/
|
|
bl .discard_lazy_cpu_state
|
|
#endif /* CONFIG_SMP */
|
|
|
|
/* Hard disable interrupts */
|
|
mfmsr r9
|
|
rldicl r9,r9,48,1
|
|
rotldi r9,r9,16
|
|
mtmsrd r9,1 /* hard-disable interrupts */
|
|
|
|
/* Check if something happened while soft-disabled */
|
|
lbz r0,PACAIRQHAPPENED(r13)
|
|
cmpwi cr0,r0,0
|
|
beq 1f
|
|
addi r1,r1,INT_FRAME_SIZE
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
1: /* We mark irqs hard disabled as this is the state we'll
|
|
* be in when returning and we need to tell arch_local_irq_restore()
|
|
* about it
|
|
*/
|
|
li r0,PACA_IRQ_HARD_DIS
|
|
stb r0,PACAIRQHAPPENED(r13)
|
|
|
|
/* We haven't lost state ... yet */
|
|
li r0,0
|
|
stb r0,PACA_NAPSTATELOST(r13)
|
|
|
|
/* Continue saving state */
|
|
SAVE_GPR(2, r1)
|
|
SAVE_NVGPRS(r1)
|
|
mfcr r3
|
|
std r3,_CCR(r1)
|
|
std r9,_MSR(r1)
|
|
std r1,PACAR1(r13)
|
|
|
|
/* Magic NAP mode enter sequence */
|
|
std r0,0(r1)
|
|
ptesync
|
|
ld r0,0(r1)
|
|
1: cmp cr0,r0,r0
|
|
bne 1b
|
|
PPC_NAP
|
|
b .
|
|
|
|
_GLOBAL(power7_wakeup_loss)
|
|
ld r1,PACAR1(r13)
|
|
REST_NVGPRS(r1)
|
|
REST_GPR(2, r1)
|
|
ld r3,_CCR(r1)
|
|
ld r4,_MSR(r1)
|
|
ld r5,_NIP(r1)
|
|
addi r1,r1,INT_FRAME_SIZE
|
|
mtcr r3
|
|
mtspr SPRN_SRR1,r4
|
|
mtspr SPRN_SRR0,r5
|
|
rfid
|
|
|
|
_GLOBAL(power7_wakeup_noloss)
|
|
lbz r0,PACA_NAPSTATELOST(r13)
|
|
cmpwi r0,0
|
|
bne .power7_wakeup_loss
|
|
ld r1,PACAR1(r13)
|
|
ld r4,_MSR(r1)
|
|
ld r5,_NIP(r1)
|
|
addi r1,r1,INT_FRAME_SIZE
|
|
mtspr SPRN_SRR1,r4
|
|
mtspr SPRN_SRR0,r5
|
|
rfid
|