forked from Minki/linux
4e33d7d479
Pull networking fixes from David Miller:
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
1718 lines
58 KiB
Makefile
1718 lines
58 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
VERSION = 4
|
|
PATCHLEVEL = 18
|
|
SUBLEVEL = 0
|
|
EXTRAVERSION = -rc3
|
|
NAME = Merciless Moray
|
|
|
|
# *DOCUMENTATION*
|
|
# To see a list of typical targets execute "make help"
|
|
# More info can be located in ./README
|
|
# Comments in this file are targeted only to the developer, do not
|
|
# expect to learn how to build the kernel reading this file.
|
|
|
|
# That's our default target when none is given on the command line
|
|
PHONY := _all
|
|
_all:
|
|
|
|
# o Do not use make's built-in rules and variables
|
|
# (this increases performance and avoids hard-to-debug behaviour);
|
|
# o Look for make include files relative to root of kernel src
|
|
MAKEFLAGS += -rR --include-dir=$(CURDIR)
|
|
|
|
# Avoid funny character set dependencies
|
|
unexport LC_ALL
|
|
LC_COLLATE=C
|
|
LC_NUMERIC=C
|
|
export LC_COLLATE LC_NUMERIC
|
|
|
|
# Avoid interference with shell env settings
|
|
unexport GREP_OPTIONS
|
|
|
|
# We are using a recursive build, so we need to do a little thinking
|
|
# to get the ordering right.
|
|
#
|
|
# Most importantly: sub-Makefiles should only ever modify files in
|
|
# their own directory. If in some directory we have a dependency on
|
|
# a file in another dir (which doesn't happen often, but it's often
|
|
# unavoidable when linking the built-in.a targets which finally
|
|
# turn into vmlinux), we will call a sub make in that other dir, and
|
|
# after that we are sure that everything which is in that other dir
|
|
# is now up to date.
|
|
#
|
|
# The only cases where we need to modify files which have global
|
|
# effects are thus separated out and done before the recursive
|
|
# descending is started. They are now explicitly listed as the
|
|
# prepare rule.
|
|
|
|
# Beautify output
|
|
# ---------------------------------------------------------------------------
|
|
#
|
|
# Normally, we echo the whole command before executing it. By making
|
|
# that echo $($(quiet)$(cmd)), we now have the possibility to set
|
|
# $(quiet) to choose other forms of output instead, e.g.
|
|
#
|
|
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
|
|
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
|
|
#
|
|
# If $(quiet) is empty, the whole command will be printed.
|
|
# If it is set to "quiet_", only the short version will be printed.
|
|
# If it is set to "silent_", nothing will be printed at all, since
|
|
# the variable $(silent_cmd_cc_o_c) doesn't exist.
|
|
#
|
|
# A simple variant is to prefix commands with $(Q) - that's useful
|
|
# for commands that shall be hidden in non-verbose mode.
|
|
#
|
|
# $(Q)ln $@ :<
|
|
#
|
|
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
|
|
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
|
|
#
|
|
# To put more focus on warnings, be less verbose as default
|
|
# Use 'make V=1' to see the full commands
|
|
|
|
ifeq ("$(origin V)", "command line")
|
|
KBUILD_VERBOSE = $(V)
|
|
endif
|
|
ifndef KBUILD_VERBOSE
|
|
KBUILD_VERBOSE = 0
|
|
endif
|
|
|
|
ifeq ($(KBUILD_VERBOSE),1)
|
|
quiet =
|
|
Q =
|
|
else
|
|
quiet=quiet_
|
|
Q = @
|
|
endif
|
|
|
|
# If the user is running make -s (silent mode), suppress echoing of
|
|
# commands
|
|
|
|
ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
|
|
quiet=silent_
|
|
tools_silent=s
|
|
endif
|
|
|
|
export quiet Q KBUILD_VERBOSE
|
|
|
|
# kbuild supports saving output files in a separate directory.
|
|
# To locate output files in a separate directory two syntaxes are supported.
|
|
# In both cases the working directory must be the root of the kernel src.
|
|
# 1) O=
|
|
# Use "make O=dir/to/store/output/files/"
|
|
#
|
|
# 2) Set KBUILD_OUTPUT
|
|
# Set the environment variable KBUILD_OUTPUT to point to the directory
|
|
# where the output files shall be placed.
|
|
# export KBUILD_OUTPUT=dir/to/store/output/files/
|
|
# make
|
|
#
|
|
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
|
|
# variable.
|
|
|
|
# KBUILD_SRC is not intended to be used by the regular user (for now),
|
|
# it is set on invocation of make with KBUILD_OUTPUT or O= specified.
|
|
ifeq ($(KBUILD_SRC),)
|
|
|
|
# OK, Make called in directory where kernel src resides
|
|
# Do we want to locate output files in a separate directory?
|
|
ifeq ("$(origin O)", "command line")
|
|
KBUILD_OUTPUT := $(O)
|
|
endif
|
|
|
|
# Cancel implicit rules on top Makefile
|
|
$(CURDIR)/Makefile Makefile: ;
|
|
|
|
ifneq ($(words $(subst :, ,$(CURDIR))), 1)
|
|
$(error main directory cannot contain spaces nor colons)
|
|
endif
|
|
|
|
ifneq ($(KBUILD_OUTPUT),)
|
|
# check that the output directory actually exists
|
|
saved-output := $(KBUILD_OUTPUT)
|
|
KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
|
|
&& pwd)
|
|
$(if $(KBUILD_OUTPUT),, \
|
|
$(error failed to create output directory "$(saved-output)"))
|
|
|
|
PHONY += $(MAKECMDGOALS) sub-make
|
|
|
|
$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
|
|
@:
|
|
|
|
# Invoke a second make in the output directory, passing relevant variables
|
|
sub-make:
|
|
$(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
|
|
-f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
|
|
|
|
# Leave processing to above invocation of make
|
|
skip-makefile := 1
|
|
endif # ifneq ($(KBUILD_OUTPUT),)
|
|
endif # ifeq ($(KBUILD_SRC),)
|
|
|
|
# We process the rest of the Makefile if this is the final invocation of make
|
|
ifeq ($(skip-makefile),)
|
|
|
|
# Do not print "Entering directory ...",
|
|
# but we want to display it when entering to the output directory
|
|
# so that IDEs/editors are able to understand relative filenames.
|
|
MAKEFLAGS += --no-print-directory
|
|
|
|
# Call a source code checker (by default, "sparse") as part of the
|
|
# C compilation.
|
|
#
|
|
# Use 'make C=1' to enable checking of only re-compiled files.
|
|
# Use 'make C=2' to enable checking of *all* source files, regardless
|
|
# of whether they are re-compiled or not.
|
|
#
|
|
# See the file "Documentation/dev-tools/sparse.rst" for more details,
|
|
# including where to get the "sparse" utility.
|
|
|
|
ifeq ("$(origin C)", "command line")
|
|
KBUILD_CHECKSRC = $(C)
|
|
endif
|
|
ifndef KBUILD_CHECKSRC
|
|
KBUILD_CHECKSRC = 0
|
|
endif
|
|
|
|
# Use make M=dir to specify directory of external module to build
|
|
# Old syntax make ... SUBDIRS=$PWD is still supported
|
|
# Setting the environment variable KBUILD_EXTMOD take precedence
|
|
ifdef SUBDIRS
|
|
KBUILD_EXTMOD ?= $(SUBDIRS)
|
|
endif
|
|
|
|
ifeq ("$(origin M)", "command line")
|
|
KBUILD_EXTMOD := $(M)
|
|
endif
|
|
|
|
ifeq ($(KBUILD_SRC),)
|
|
# building in the source tree
|
|
srctree := .
|
|
else
|
|
ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
|
|
# building in a subdirectory of the source tree
|
|
srctree := ..
|
|
else
|
|
srctree := $(KBUILD_SRC)
|
|
endif
|
|
endif
|
|
|
|
export KBUILD_CHECKSRC KBUILD_EXTMOD KBUILD_SRC
|
|
|
|
objtree := .
|
|
src := $(srctree)
|
|
obj := $(objtree)
|
|
|
|
VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
|
|
|
|
export srctree objtree VPATH
|
|
|
|
# To make sure we do not include .config for any of the *config targets
|
|
# catch them early, and hand them over to scripts/kconfig/Makefile
|
|
# It is allowed to specify more targets when calling make, including
|
|
# mixing *config targets and build targets.
|
|
# For example 'make oldconfig all'.
|
|
# Detect when mixed targets is specified, and make a second invocation
|
|
# of make so .config is not included in this case either (for *config).
|
|
|
|
version_h := include/generated/uapi/linux/version.h
|
|
old_version_h := include/linux/version.h
|
|
|
|
clean-targets := %clean mrproper cleandocs
|
|
no-dot-config-targets := $(clean-targets) \
|
|
cscope gtags TAGS tags help% %docs check% coccicheck \
|
|
$(version_h) headers_% archheaders archscripts \
|
|
kernelversion %src-pkg
|
|
|
|
config-targets := 0
|
|
mixed-targets := 0
|
|
dot-config := 1
|
|
|
|
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
|
|
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
|
|
dot-config := 0
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
|
|
config-targets := 1
|
|
ifneq ($(words $(MAKECMDGOALS)),1)
|
|
mixed-targets := 1
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# For "make -j clean all", "make -j mrproper defconfig all", etc.
|
|
ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
|
|
ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
|
|
mixed-targets := 1
|
|
endif
|
|
endif
|
|
|
|
# install and modules_install need also be processed one by one
|
|
ifneq ($(filter install,$(MAKECMDGOALS)),)
|
|
ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
|
|
mixed-targets := 1
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(mixed-targets),1)
|
|
# ===========================================================================
|
|
# We're called with mixed targets (*config and build targets).
|
|
# Handle them one by one.
|
|
|
|
PHONY += $(MAKECMDGOALS) __build_one_by_one
|
|
|
|
$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
|
|
@:
|
|
|
|
__build_one_by_one:
|
|
$(Q)set -e; \
|
|
for i in $(MAKECMDGOALS); do \
|
|
$(MAKE) -f $(srctree)/Makefile $$i; \
|
|
done
|
|
|
|
else
|
|
|
|
# We need some generic definitions (do not try to remake the file).
|
|
scripts/Kbuild.include: ;
|
|
include scripts/Kbuild.include
|
|
|
|
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
|
|
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
|
|
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
|
|
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
|
|
|
|
# SUBARCH tells the usermode build what the underlying arch is. That is set
|
|
# first, and if a usermode build is happening, the "ARCH=um" on the command
|
|
# line overrides the setting of ARCH below. If a native build is happening,
|
|
# then ARCH is assigned, getting whatever value it gets normally, and
|
|
# SUBARCH is subsequently ignored.
|
|
|
|
SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
|
|
-e s/sun4u/sparc64/ \
|
|
-e s/arm.*/arm/ -e s/sa110/arm/ \
|
|
-e s/s390x/s390/ -e s/parisc64/parisc/ \
|
|
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
|
|
-e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \
|
|
-e s/riscv.*/riscv/)
|
|
|
|
# Cross compiling and selecting different set of gcc/bin-utils
|
|
# ---------------------------------------------------------------------------
|
|
#
|
|
# When performing cross compilation for other architectures ARCH shall be set
|
|
# to the target architecture. (See arch/* for the possibilities).
|
|
# ARCH can be set during invocation of make:
|
|
# make ARCH=ia64
|
|
# Another way is to have ARCH set in the environment.
|
|
# The default ARCH is the host where make is executed.
|
|
|
|
# CROSS_COMPILE specify the prefix used for all executables used
|
|
# during compilation. Only gcc and related bin-utils executables
|
|
# are prefixed with $(CROSS_COMPILE).
|
|
# CROSS_COMPILE can be set on the command line
|
|
# make CROSS_COMPILE=ia64-linux-
|
|
# Alternatively CROSS_COMPILE can be set in the environment.
|
|
# Default value for CROSS_COMPILE is not to prefix executables
|
|
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
|
|
ARCH ?= $(SUBARCH)
|
|
|
|
# Architecture as present in compile.h
|
|
UTS_MACHINE := $(ARCH)
|
|
SRCARCH := $(ARCH)
|
|
|
|
# Additional ARCH settings for x86
|
|
ifeq ($(ARCH),i386)
|
|
SRCARCH := x86
|
|
endif
|
|
ifeq ($(ARCH),x86_64)
|
|
SRCARCH := x86
|
|
endif
|
|
|
|
# Additional ARCH settings for sparc
|
|
ifeq ($(ARCH),sparc32)
|
|
SRCARCH := sparc
|
|
endif
|
|
ifeq ($(ARCH),sparc64)
|
|
SRCARCH := sparc
|
|
endif
|
|
|
|
# Additional ARCH settings for sh
|
|
ifeq ($(ARCH),sh64)
|
|
SRCARCH := sh
|
|
endif
|
|
|
|
KCONFIG_CONFIG ?= .config
|
|
export KCONFIG_CONFIG
|
|
|
|
# SHELL used by kbuild
|
|
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
|
|
else if [ -x /bin/bash ]; then echo /bin/bash; \
|
|
else echo sh; fi ; fi)
|
|
|
|
HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS)
|
|
HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS)
|
|
HOST_LFS_LIBS := $(shell getconf LFS_LIBS)
|
|
|
|
HOSTCC = gcc
|
|
HOSTCXX = g++
|
|
HOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
|
|
-fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS)
|
|
HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS)
|
|
HOSTLDFLAGS := $(HOST_LFS_LDFLAGS)
|
|
HOST_LOADLIBES := $(HOST_LFS_LIBS)
|
|
|
|
# Make variables (CC, etc...)
|
|
AS = $(CROSS_COMPILE)as
|
|
LD = $(CROSS_COMPILE)ld
|
|
CC = $(CROSS_COMPILE)gcc
|
|
CPP = $(CC) -E
|
|
AR = $(CROSS_COMPILE)ar
|
|
NM = $(CROSS_COMPILE)nm
|
|
STRIP = $(CROSS_COMPILE)strip
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
OBJDUMP = $(CROSS_COMPILE)objdump
|
|
LEX = flex
|
|
YACC = bison
|
|
AWK = awk
|
|
GENKSYMS = scripts/genksyms/genksyms
|
|
INSTALLKERNEL := installkernel
|
|
DEPMOD = /sbin/depmod
|
|
PERL = perl
|
|
PYTHON = python
|
|
PYTHON2 = python2
|
|
PYTHON3 = python3
|
|
CHECK = sparse
|
|
|
|
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
|
|
-Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
|
|
NOSTDINC_FLAGS =
|
|
CFLAGS_MODULE =
|
|
AFLAGS_MODULE =
|
|
LDFLAGS_MODULE =
|
|
CFLAGS_KERNEL =
|
|
AFLAGS_KERNEL =
|
|
LDFLAGS_vmlinux =
|
|
|
|
# Use USERINCLUDE when you must reference the UAPI directories only.
|
|
USERINCLUDE := \
|
|
-I$(srctree)/arch/$(SRCARCH)/include/uapi \
|
|
-I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \
|
|
-I$(srctree)/include/uapi \
|
|
-I$(objtree)/include/generated/uapi \
|
|
-include $(srctree)/include/linux/kconfig.h
|
|
|
|
# Use LINUXINCLUDE when you must reference the include/ directory.
|
|
# Needed to be compatible with the O= option
|
|
LINUXINCLUDE := \
|
|
-I$(srctree)/arch/$(SRCARCH)/include \
|
|
-I$(objtree)/arch/$(SRCARCH)/include/generated \
|
|
$(if $(KBUILD_SRC), -I$(srctree)/include) \
|
|
-I$(objtree)/include \
|
|
$(USERINCLUDE)
|
|
|
|
KBUILD_AFLAGS := -D__ASSEMBLY__
|
|
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
|
|
-fno-strict-aliasing -fno-common -fshort-wchar \
|
|
-Werror-implicit-function-declaration \
|
|
-Wno-format-security \
|
|
-std=gnu89
|
|
KBUILD_CPPFLAGS := -D__KERNEL__
|
|
KBUILD_AFLAGS_KERNEL :=
|
|
KBUILD_CFLAGS_KERNEL :=
|
|
KBUILD_AFLAGS_MODULE := -DMODULE
|
|
KBUILD_CFLAGS_MODULE := -DMODULE
|
|
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
|
|
LDFLAGS :=
|
|
GCC_PLUGINS_CFLAGS :=
|
|
|
|
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
|
|
export CPP AR NM STRIP OBJCOPY OBJDUMP HOSTLDFLAGS HOST_LOADLIBES
|
|
export MAKE LEX YACC AWK GENKSYMS INSTALLKERNEL PERL PYTHON PYTHON2 PYTHON3 UTS_MACHINE
|
|
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
|
|
|
|
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
|
|
export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
|
|
export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN
|
|
export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
|
|
export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
|
|
export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
|
|
export KBUILD_ARFLAGS
|
|
|
|
# When compiling out-of-tree modules, put MODVERDIR in the module
|
|
# tree rather than in the kernel tree. The kernel tree might
|
|
# even be read-only.
|
|
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
|
|
|
|
# Files to ignore in find ... statements
|
|
|
|
export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
|
|
-name CVS -o -name .pc -o -name .hg -o -name .git \) \
|
|
-prune -o
|
|
export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
|
|
--exclude CVS --exclude .pc --exclude .hg --exclude .git
|
|
|
|
# ===========================================================================
|
|
# Rules shared between *config targets and build targets
|
|
|
|
# Basic helpers built in scripts/basic/
|
|
PHONY += scripts_basic
|
|
scripts_basic:
|
|
$(Q)$(MAKE) $(build)=scripts/basic
|
|
$(Q)rm -f .tmp_quiet_recordmcount
|
|
|
|
# To avoid any implicit rule to kick in, define an empty command.
|
|
scripts/basic/%: scripts_basic ;
|
|
|
|
PHONY += outputmakefile
|
|
# outputmakefile generates a Makefile in the output directory, if using a
|
|
# separate output directory. This allows convenient use of make in the
|
|
# output directory.
|
|
outputmakefile:
|
|
ifneq ($(KBUILD_SRC),)
|
|
$(Q)ln -fsn $(srctree) source
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
|
|
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
|
|
endif
|
|
|
|
ifeq ($(cc-name),clang)
|
|
ifneq ($(CROSS_COMPILE),)
|
|
CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
|
|
GCC_TOOLCHAIN := $(realpath $(dir $(shell which $(LD)))/..)
|
|
endif
|
|
ifneq ($(GCC_TOOLCHAIN),)
|
|
CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
|
|
endif
|
|
KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
|
|
KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
|
|
KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
|
|
KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
|
|
endif
|
|
|
|
RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register
|
|
RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk
|
|
RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG)))
|
|
export RETPOLINE_CFLAGS
|
|
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
|
|
KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
|
|
|
|
# check for 'asm goto'
|
|
ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
|
|
CC_HAVE_ASM_GOTO := 1
|
|
KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
|
|
KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
|
|
endif
|
|
|
|
# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included.
|
|
# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
|
|
# CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
|
|
# and from include/config/auto.conf.cmd to detect the compiler upgrade.
|
|
CC_VERSION_TEXT = $(shell $(CC) --version | head -n 1)
|
|
|
|
ifeq ($(config-targets),1)
|
|
# ===========================================================================
|
|
# *config targets only - make sure prerequisites are updated, and descend
|
|
# in scripts/kconfig to make the *config target
|
|
|
|
# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
|
|
# KBUILD_DEFCONFIG may point out an alternative default configuration
|
|
# used for 'make defconfig'
|
|
include arch/$(SRCARCH)/Makefile
|
|
export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT
|
|
|
|
config: scripts_basic outputmakefile FORCE
|
|
$(Q)$(MAKE) $(build)=scripts/kconfig $@
|
|
|
|
%config: scripts_basic outputmakefile FORCE
|
|
$(Q)$(MAKE) $(build)=scripts/kconfig $@
|
|
|
|
else
|
|
# ===========================================================================
|
|
# Build targets only - this includes vmlinux, arch specific targets, clean
|
|
# targets and others. In general all targets except *config targets.
|
|
|
|
# If building an external module we do not care about the all: rule
|
|
# but instead _all depend on modules
|
|
PHONY += all
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
_all: all
|
|
else
|
|
_all: modules
|
|
endif
|
|
|
|
# Decide whether to build built-in, modular, or both.
|
|
# Normally, just do built-in.
|
|
|
|
KBUILD_MODULES :=
|
|
KBUILD_BUILTIN := 1
|
|
|
|
# If we have only "make modules", don't compile built-in objects.
|
|
# When we're building modules with modversions, we need to consider
|
|
# the built-in objects during the descend as well, in order to
|
|
# make sure the checksums are up to date before we record them.
|
|
|
|
ifeq ($(MAKECMDGOALS),modules)
|
|
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
|
|
endif
|
|
|
|
# If we have "make <whatever> modules", compile modules
|
|
# in addition to whatever we do anyway.
|
|
# Just "make" or "make all" shall build modules as well
|
|
|
|
ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
|
|
KBUILD_MODULES := 1
|
|
endif
|
|
|
|
ifeq ($(MAKECMDGOALS),)
|
|
KBUILD_MODULES := 1
|
|
endif
|
|
|
|
export KBUILD_MODULES KBUILD_BUILTIN
|
|
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
# Objects we will link into vmlinux / subdirs we need to visit
|
|
init-y := init/
|
|
drivers-y := drivers/ sound/ firmware/
|
|
net-y := net/
|
|
libs-y := lib/
|
|
core-y := usr/
|
|
virt-y := virt/
|
|
endif # KBUILD_EXTMOD
|
|
|
|
ifeq ($(dot-config),1)
|
|
-include include/config/auto.conf
|
|
endif
|
|
|
|
# The all: target is the default when no target is given on the
|
|
# command line.
|
|
# This allow a user to issue only 'make' to build a kernel including modules
|
|
# Defaults to vmlinux, but the arch makefile usually adds further targets
|
|
all: vmlinux
|
|
|
|
CFLAGS_GCOV := -fprofile-arcs -ftest-coverage \
|
|
$(call cc-option,-fno-tree-loop-im) \
|
|
$(call cc-disable-warning,maybe-uninitialized,)
|
|
export CFLAGS_GCOV
|
|
|
|
# The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
|
|
# values of the respective KBUILD_* variables
|
|
ARCH_CPPFLAGS :=
|
|
ARCH_AFLAGS :=
|
|
ARCH_CFLAGS :=
|
|
include arch/$(SRCARCH)/Makefile
|
|
|
|
ifeq ($(dot-config),1)
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
# Read in dependencies to all Kconfig* files, make sure to run syncconfig if
|
|
# changes are detected. This should be included after arch/$(SRCARCH)/Makefile
|
|
# because some architectures define CROSS_COMPILE there.
|
|
-include include/config/auto.conf.cmd
|
|
|
|
# To avoid any implicit rule to kick in, define an empty command
|
|
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
|
|
|
|
# The actual configuration files used during the build are stored in
|
|
# include/generated/ and include/config/. Update them if .config is newer than
|
|
# include/config/auto.conf (which mirrors .config).
|
|
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
|
|
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
|
|
else
|
|
# external modules needs include/generated/autoconf.h and include/config/auto.conf
|
|
# but do not care if they are up-to-date. Use auto.conf to trigger the test
|
|
PHONY += include/config/auto.conf
|
|
|
|
include/config/auto.conf:
|
|
$(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
|
|
echo >&2; \
|
|
echo >&2 " ERROR: Kernel configuration is invalid."; \
|
|
echo >&2 " include/generated/autoconf.h or $@ are missing.";\
|
|
echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
|
|
echo >&2 ; \
|
|
/bin/false)
|
|
|
|
endif # KBUILD_EXTMOD
|
|
|
|
else
|
|
# Dummy target needed, because used as prerequisite
|
|
include/config/auto.conf: ;
|
|
endif # $(dot-config)
|
|
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context)
|
|
|
|
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
|
|
KBUILD_CFLAGS += $(call cc-option,-Oz,-Os)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,)
|
|
else
|
|
ifdef CONFIG_PROFILE_ALL_BRANCHES
|
|
KBUILD_CFLAGS += -O2 $(call cc-disable-warning,maybe-uninitialized,)
|
|
else
|
|
KBUILD_CFLAGS += -O2
|
|
endif
|
|
endif
|
|
|
|
KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
|
|
$(call cc-disable-warning,maybe-uninitialized,))
|
|
|
|
# Tell gcc to never replace conditional load with a non-conditional one
|
|
KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
|
|
|
|
include scripts/Makefile.kcov
|
|
include scripts/Makefile.gcc-plugins
|
|
|
|
ifdef CONFIG_READABLE_ASM
|
|
# Disable optimizations that make assembler listings hard to read.
|
|
# reorder blocks reorders the control in the function
|
|
# ipa clone creates specialized cloned functions
|
|
# partial inlining inlines only parts of functions
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
|
|
$(call cc-option,-fno-ipa-cp-clone,) \
|
|
$(call cc-option,-fno-partial-inlining)
|
|
endif
|
|
|
|
ifneq ($(CONFIG_FRAME_WARN),0)
|
|
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
|
|
endif
|
|
|
|
stackp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector
|
|
stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector
|
|
stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong
|
|
|
|
KBUILD_CFLAGS += $(stackp-flags-y)
|
|
|
|
ifeq ($(cc-name),clang)
|
|
KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
|
|
# Quiet clang warning: comparison of unsigned expression < 0 is always false
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
|
|
# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
|
|
# source of a reference will be _MergedGlobals and not on of the whitelisted names.
|
|
# See modpost pattern 2
|
|
KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
|
|
KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
|
|
else
|
|
|
|
# These warnings generated too much noise in a regular build.
|
|
# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
|
|
endif
|
|
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
|
|
ifdef CONFIG_FRAME_POINTER
|
|
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
|
|
else
|
|
# Some targets (ARM with Thumb2, for example), can't be built with frame
|
|
# pointers. For those, we don't have FUNCTION_TRACER automatically
|
|
# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
|
|
# incompatible with -fomit-frame-pointer with current GCC, so we don't use
|
|
# -fomit-frame-pointer with FUNCTION_TRACER.
|
|
ifndef CONFIG_FUNCTION_TRACER
|
|
KBUILD_CFLAGS += -fomit-frame-pointer
|
|
endif
|
|
endif
|
|
|
|
KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)
|
|
|
|
ifdef CONFIG_DEBUG_INFO
|
|
ifdef CONFIG_DEBUG_INFO_SPLIT
|
|
KBUILD_CFLAGS += $(call cc-option, -gsplit-dwarf, -g)
|
|
else
|
|
KBUILD_CFLAGS += -g
|
|
endif
|
|
KBUILD_AFLAGS += -Wa,-gdwarf-2
|
|
endif
|
|
ifdef CONFIG_DEBUG_INFO_DWARF4
|
|
KBUILD_CFLAGS += $(call cc-option, -gdwarf-4,)
|
|
endif
|
|
|
|
ifdef CONFIG_DEBUG_INFO_REDUCED
|
|
KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \
|
|
$(call cc-option,-fno-var-tracking)
|
|
endif
|
|
|
|
ifdef CONFIG_FUNCTION_TRACER
|
|
ifndef CC_FLAGS_FTRACE
|
|
CC_FLAGS_FTRACE := -pg
|
|
endif
|
|
export CC_FLAGS_FTRACE
|
|
ifdef CONFIG_HAVE_FENTRY
|
|
CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY)
|
|
endif
|
|
KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY)
|
|
KBUILD_AFLAGS += $(CC_USING_FENTRY)
|
|
ifdef CONFIG_DYNAMIC_FTRACE
|
|
ifdef CONFIG_HAVE_C_RECORDMCOUNT
|
|
BUILD_C_RECORDMCOUNT := y
|
|
export BUILD_C_RECORDMCOUNT
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# We trigger additional mismatches with less inlining
|
|
ifdef CONFIG_DEBUG_SECTION_MISMATCH
|
|
KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
|
|
endif
|
|
|
|
ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
|
|
KBUILD_CFLAGS_KERNEL += $(call cc-option,-ffunction-sections,)
|
|
KBUILD_CFLAGS_KERNEL += $(call cc-option,-fdata-sections,)
|
|
endif
|
|
|
|
# arch Makefile may override CC so keep this after arch Makefile is included
|
|
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
|
|
|
|
# warn about C99 declaration after statement
|
|
KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
|
|
|
|
# disable pointer signed / unsigned warnings in gcc 4.0
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
|
|
|
|
# disable invalid "can't wrap" optimizations for signed / pointers
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
|
|
|
|
# clang sets -fmerge-all-constants by default as optimization, but this
|
|
# is non-conforming behavior for C and in fact breaks the kernel, so we
|
|
# need to disable it here generally.
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-merge-all-constants)
|
|
|
|
# for gcc -fno-merge-all-constants disables everything, but it is fine
|
|
# to have actual conforming behavior enabled.
|
|
KBUILD_CFLAGS += $(call cc-option,-fmerge-constants)
|
|
|
|
# Make sure -fstack-check isn't enabled (like gentoo apparently did)
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-stack-check,)
|
|
|
|
# conserve stack if available
|
|
KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
|
|
|
|
# disallow errors like 'EXPORT_GPL(foo);' with missing header
|
|
KBUILD_CFLAGS += $(call cc-option,-Werror=implicit-int)
|
|
|
|
# require functions to have arguments in prototypes, not empty 'int foo()'
|
|
KBUILD_CFLAGS += $(call cc-option,-Werror=strict-prototypes)
|
|
|
|
# Prohibit date/time macros, which would make the build non-deterministic
|
|
KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
|
|
|
|
# enforce correct pointer usage
|
|
KBUILD_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types)
|
|
|
|
# Require designated initializers for all marked structures
|
|
KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init)
|
|
|
|
# change __FILE__ to the relative path from the srctree
|
|
KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
|
|
|
|
# use the deterministic mode of AR if available
|
|
KBUILD_ARFLAGS := $(call ar-option,D)
|
|
|
|
include scripts/Makefile.kasan
|
|
include scripts/Makefile.extrawarn
|
|
include scripts/Makefile.ubsan
|
|
|
|
# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
|
|
# last assignments
|
|
KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
|
|
KBUILD_AFLAGS += $(ARCH_AFLAGS) $(KAFLAGS)
|
|
KBUILD_CFLAGS += $(ARCH_CFLAGS) $(KCFLAGS)
|
|
|
|
# Use --build-id when available.
|
|
LDFLAGS_BUILD_ID := $(call ld-option, --build-id)
|
|
KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
|
|
LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
|
|
|
|
ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
|
|
LDFLAGS_vmlinux += $(call ld-option, --gc-sections,)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
|
|
LDFLAGS_vmlinux += $(call ld-option, -X,)
|
|
endif
|
|
|
|
# insure the checker run with the right endianness
|
|
CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
|
|
|
|
# the checker needs the correct machine size
|
|
CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
|
|
|
|
# Default kernel image to build when no specific target is given.
|
|
# KBUILD_IMAGE may be overruled on the command line or
|
|
# set in the environment
|
|
# Also any assignments in arch/$(ARCH)/Makefile take precedence over
|
|
# this default value
|
|
export KBUILD_IMAGE ?= vmlinux
|
|
|
|
#
|
|
# INSTALL_PATH specifies where to place the updated kernel and system map
|
|
# images. Default is /boot, but you can set it to other values
|
|
export INSTALL_PATH ?= /boot
|
|
|
|
#
|
|
# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
|
|
# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
|
|
# an argument if needed. Otherwise it defaults to the kernel install path
|
|
#
|
|
export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
|
|
|
|
#
|
|
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
|
|
# relocations required by build roots. This is not defined in the
|
|
# makefile but the argument can be passed to make if needed.
|
|
#
|
|
|
|
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
|
|
export MODLIB
|
|
|
|
#
|
|
# INSTALL_MOD_STRIP, if defined, will cause modules to be
|
|
# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
|
|
# the default option --strip-debug will be used. Otherwise,
|
|
# INSTALL_MOD_STRIP value will be used as the options to the strip command.
|
|
|
|
ifdef INSTALL_MOD_STRIP
|
|
ifeq ($(INSTALL_MOD_STRIP),1)
|
|
mod_strip_cmd = $(STRIP) --strip-debug
|
|
else
|
|
mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
|
|
endif # INSTALL_MOD_STRIP=1
|
|
else
|
|
mod_strip_cmd = true
|
|
endif # INSTALL_MOD_STRIP
|
|
export mod_strip_cmd
|
|
|
|
# CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed
|
|
# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP
|
|
# or CONFIG_MODULE_COMPRESS_XZ.
|
|
|
|
mod_compress_cmd = true
|
|
ifdef CONFIG_MODULE_COMPRESS
|
|
ifdef CONFIG_MODULE_COMPRESS_GZIP
|
|
mod_compress_cmd = gzip -n -f
|
|
endif # CONFIG_MODULE_COMPRESS_GZIP
|
|
ifdef CONFIG_MODULE_COMPRESS_XZ
|
|
mod_compress_cmd = xz -f
|
|
endif # CONFIG_MODULE_COMPRESS_XZ
|
|
endif # CONFIG_MODULE_COMPRESS
|
|
export mod_compress_cmd
|
|
|
|
# Select initial ramdisk compression format, default is gzip(1).
|
|
# This shall be used by the dracut(8) tool while creating an initramfs image.
|
|
#
|
|
INITRD_COMPRESS-y := gzip
|
|
INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
|
|
INITRD_COMPRESS-$(CONFIG_RD_LZMA) := lzma
|
|
INITRD_COMPRESS-$(CONFIG_RD_XZ) := xz
|
|
INITRD_COMPRESS-$(CONFIG_RD_LZO) := lzo
|
|
INITRD_COMPRESS-$(CONFIG_RD_LZ4) := lz4
|
|
# do not export INITRD_COMPRESS, since we didn't actually
|
|
# choose a sane default compression above.
|
|
# export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
|
|
|
|
ifdef CONFIG_MODULE_SIG_ALL
|
|
$(eval $(call config_filename,MODULE_SIG_KEY))
|
|
|
|
mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509
|
|
else
|
|
mod_sign_cmd = true
|
|
endif
|
|
export mod_sign_cmd
|
|
|
|
ifdef CONFIG_STACK_VALIDATION
|
|
has_libelf := $(call try-run,\
|
|
echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0)
|
|
ifeq ($(has_libelf),1)
|
|
objtool_target := tools/objtool FORCE
|
|
else
|
|
ifdef CONFIG_UNWINDER_ORC
|
|
$(error "Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
|
|
else
|
|
$(warning "Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
|
|
endif
|
|
SKIP_STACK_VALIDATION := 1
|
|
export SKIP_STACK_VALIDATION
|
|
endif
|
|
endif
|
|
|
|
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
|
|
|
|
vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
|
|
$(core-y) $(core-m) $(drivers-y) $(drivers-m) \
|
|
$(net-y) $(net-m) $(libs-y) $(libs-m) $(virt-y)))
|
|
|
|
vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
|
|
$(init-) $(core-) $(drivers-) $(net-) $(libs-) $(virt-))))
|
|
|
|
init-y := $(patsubst %/, %/built-in.a, $(init-y))
|
|
core-y := $(patsubst %/, %/built-in.a, $(core-y))
|
|
drivers-y := $(patsubst %/, %/built-in.a, $(drivers-y))
|
|
net-y := $(patsubst %/, %/built-in.a, $(net-y))
|
|
libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
|
|
libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y)))
|
|
virt-y := $(patsubst %/, %/built-in.a, $(virt-y))
|
|
|
|
# Externally visible symbols (used by link-vmlinux.sh)
|
|
export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
|
|
export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y2) $(drivers-y) $(net-y) $(virt-y)
|
|
export KBUILD_VMLINUX_LIBS := $(libs-y1)
|
|
export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
|
|
export LDFLAGS_vmlinux
|
|
# used by scripts/package/Makefile
|
|
export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools)
|
|
|
|
vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN) $(KBUILD_VMLINUX_LIBS)
|
|
|
|
# Recurse until adjust_autoksyms.sh is satisfied
|
|
PHONY += autoksyms_recursive
|
|
autoksyms_recursive: $(vmlinux-deps)
|
|
ifdef CONFIG_TRIM_UNUSED_KSYMS
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
|
|
"$(MAKE) -f $(srctree)/Makefile vmlinux"
|
|
endif
|
|
|
|
# For the kernel to actually contain only the needed exported symbols,
|
|
# we have to build modules as well to determine what those symbols are.
|
|
# (this can be evaluated only once include/config/auto.conf has been included)
|
|
ifdef CONFIG_TRIM_UNUSED_KSYMS
|
|
KBUILD_MODULES := 1
|
|
endif
|
|
|
|
autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
|
|
|
|
$(autoksyms_h):
|
|
$(Q)mkdir -p $(dir $@)
|
|
$(Q)touch $@
|
|
|
|
ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
|
|
|
|
# Final link of vmlinux with optional arch pass after final link
|
|
cmd_link-vmlinux = \
|
|
$(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) ; \
|
|
$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
|
|
|
|
vmlinux: scripts/link-vmlinux.sh autoksyms_recursive $(vmlinux-deps) FORCE
|
|
ifdef CONFIG_HEADERS_CHECK
|
|
$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
|
|
endif
|
|
ifdef CONFIG_GDB_SCRIPTS
|
|
$(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py)
|
|
endif
|
|
+$(call if_changed,link-vmlinux)
|
|
|
|
# Build samples along the rest of the kernel
|
|
ifdef CONFIG_SAMPLES
|
|
vmlinux-dirs += samples
|
|
endif
|
|
|
|
# The actual objects are generated when descending,
|
|
# make sure no implicit rule kicks in
|
|
$(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
|
|
|
|
# Handle descending into subdirectories listed in $(vmlinux-dirs)
|
|
# Preset locale variables to speed up the build process. Limit locale
|
|
# tweaks to this spot to avoid wrong language settings when running
|
|
# make menuconfig etc.
|
|
# Error messages still appears in the original language
|
|
|
|
PHONY += $(vmlinux-dirs)
|
|
$(vmlinux-dirs): prepare scripts
|
|
$(Q)$(MAKE) $(build)=$@ need-builtin=1
|
|
|
|
define filechk_kernel.release
|
|
echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
|
|
endef
|
|
|
|
# Store (new) KERNELRELEASE string in include/config/kernel.release
|
|
include/config/kernel.release: include/config/auto.conf FORCE
|
|
$(call filechk,kernel.release)
|
|
|
|
# Additional helpers built in scripts/
|
|
# Carefully list dependencies so we do not try to build scripts twice
|
|
# in parallel
|
|
PHONY += scripts
|
|
scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
|
|
asm-generic gcc-plugins $(autoksyms_h)
|
|
$(Q)$(MAKE) $(build)=$(@)
|
|
|
|
# Things we need to do before we recursively start building the kernel
|
|
# or the modules are listed in "prepare".
|
|
# A multi level approach is used. prepareN is processed before prepareN-1.
|
|
# archprepare is used in arch Makefiles and when processed asm symlink,
|
|
# version.h and scripts_basic is processed / created.
|
|
|
|
# Listed in dependency order
|
|
PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
|
|
|
|
# prepare3 is used to check if we are building in a separate output directory,
|
|
# and if so do:
|
|
# 1) Check that make has not been executed in the kernel src $(srctree)
|
|
prepare3: include/config/kernel.release
|
|
ifneq ($(KBUILD_SRC),)
|
|
@$(kecho) ' Using $(srctree) as source for kernel'
|
|
$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
|
|
echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
|
|
echo >&2 " in the '$(srctree)' directory.";\
|
|
/bin/false; \
|
|
fi;
|
|
endif
|
|
|
|
# prepare2 creates a makefile if using a separate output directory.
|
|
# From this point forward, .config has been reprocessed, so any rules
|
|
# that need to depend on updated CONFIG_* values can be checked here.
|
|
prepare2: prepare3 outputmakefile asm-generic
|
|
|
|
prepare1: prepare2 $(version_h) $(autoksyms_h) include/generated/utsrelease.h \
|
|
include/config/auto.conf
|
|
$(cmd_crmodverdir)
|
|
|
|
archprepare: archheaders archscripts prepare1 scripts_basic
|
|
|
|
prepare0: archprepare gcc-plugins
|
|
$(Q)$(MAKE) $(build)=.
|
|
|
|
# All the preparing..
|
|
prepare: prepare0 prepare-objtool
|
|
|
|
# Support for using generic headers in asm-generic
|
|
PHONY += asm-generic uapi-asm-generic
|
|
asm-generic: uapi-asm-generic
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
|
|
src=asm obj=arch/$(SRCARCH)/include/generated/asm
|
|
uapi-asm-generic:
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
|
|
src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
|
|
|
|
PHONY += prepare-objtool
|
|
prepare-objtool: $(objtool_target)
|
|
|
|
# Generate some files
|
|
# ---------------------------------------------------------------------------
|
|
|
|
# KERNELRELEASE can change from a few different places, meaning version.h
|
|
# needs to be updated, so this check is forced on all builds
|
|
|
|
uts_len := 64
|
|
define filechk_utsrelease.h
|
|
if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
|
|
echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
|
|
exit 1; \
|
|
fi; \
|
|
(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
|
|
endef
|
|
|
|
define filechk_version.h
|
|
(echo \#define LINUX_VERSION_CODE $(shell \
|
|
expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
|
|
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
|
|
endef
|
|
|
|
$(version_h): $(srctree)/Makefile FORCE
|
|
$(call filechk,version.h)
|
|
$(Q)rm -f $(old_version_h)
|
|
|
|
include/generated/utsrelease.h: include/config/kernel.release FORCE
|
|
$(call filechk,utsrelease.h)
|
|
|
|
PHONY += headerdep
|
|
headerdep:
|
|
$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
|
|
$(srctree)/scripts/headerdep.pl -I$(srctree)/include
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Kernel headers
|
|
|
|
#Default location for installed headers
|
|
export INSTALL_HDR_PATH = $(objtree)/usr
|
|
|
|
# If we do an all arch process set dst to include/arch-$(SRCARCH)
|
|
hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(SRCARCH), dst=include)
|
|
|
|
PHONY += archheaders
|
|
archheaders:
|
|
|
|
PHONY += archscripts
|
|
archscripts:
|
|
|
|
PHONY += __headers
|
|
__headers: $(version_h) scripts_basic uapi-asm-generic archheaders archscripts
|
|
$(Q)$(MAKE) $(build)=scripts build_unifdef
|
|
|
|
PHONY += headers_install_all
|
|
headers_install_all:
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
|
|
|
|
PHONY += headers_install
|
|
headers_install: __headers
|
|
$(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \
|
|
$(error Headers not exportable for the $(SRCARCH) architecture))
|
|
$(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include
|
|
$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst)
|
|
|
|
PHONY += headers_check_all
|
|
headers_check_all: headers_install_all
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
|
|
|
|
PHONY += headers_check
|
|
headers_check: headers_install
|
|
$(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include HDRCHECK=1
|
|
$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst) HDRCHECK=1
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Kernel selftest
|
|
|
|
PHONY += kselftest
|
|
kselftest:
|
|
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
|
|
|
|
PHONY += kselftest-clean
|
|
kselftest-clean:
|
|
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests clean
|
|
|
|
PHONY += kselftest-merge
|
|
kselftest-merge:
|
|
$(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!))
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
|
|
-m $(objtree)/.config \
|
|
$(srctree)/tools/testing/selftests/*/config
|
|
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Modules
|
|
|
|
ifdef CONFIG_MODULES
|
|
|
|
# By default, build modules as well
|
|
|
|
all: modules
|
|
|
|
# Build modules
|
|
#
|
|
# A module can be listed more than once in obj-m resulting in
|
|
# duplicate lines in modules.order files. Those are removed
|
|
# using awk while concatenating to the final file.
|
|
|
|
PHONY += modules
|
|
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
|
|
$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
|
|
@$(kecho) ' Building modules, stage 2.';
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
|
|
|
|
modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
|
|
$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
|
|
|
|
%/modules.builtin: include/config/auto.conf
|
|
$(Q)$(MAKE) $(modbuiltin)=$*
|
|
|
|
|
|
# Target to prepare building external modules
|
|
PHONY += modules_prepare
|
|
modules_prepare: prepare scripts
|
|
|
|
# Target to install modules
|
|
PHONY += modules_install
|
|
modules_install: _modinst_ _modinst_post
|
|
|
|
PHONY += _modinst_
|
|
_modinst_:
|
|
@rm -rf $(MODLIB)/kernel
|
|
@rm -f $(MODLIB)/source
|
|
@mkdir -p $(MODLIB)/kernel
|
|
@ln -s $(abspath $(srctree)) $(MODLIB)/source
|
|
@if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
|
|
rm -f $(MODLIB)/build ; \
|
|
ln -s $(CURDIR) $(MODLIB)/build ; \
|
|
fi
|
|
@cp -f $(objtree)/modules.order $(MODLIB)/
|
|
@cp -f $(objtree)/modules.builtin $(MODLIB)/
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
|
|
|
|
# This depmod is only for convenience to give the initial
|
|
# boot a modules.dep even before / is mounted read-write. However the
|
|
# boot script depmod is the master version.
|
|
PHONY += _modinst_post
|
|
_modinst_post: _modinst_
|
|
$(call cmd,depmod)
|
|
|
|
ifeq ($(CONFIG_MODULE_SIG), y)
|
|
PHONY += modules_sign
|
|
modules_sign:
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
|
|
endif
|
|
|
|
else # CONFIG_MODULES
|
|
|
|
# Modules not configured
|
|
# ---------------------------------------------------------------------------
|
|
|
|
PHONY += modules modules_install
|
|
modules modules_install:
|
|
@echo >&2
|
|
@echo >&2 "The present kernel configuration has modules disabled."
|
|
@echo >&2 "Type 'make config' and enable loadable module support."
|
|
@echo >&2 "Then build a kernel with module support enabled."
|
|
@echo >&2
|
|
@exit 1
|
|
|
|
endif # CONFIG_MODULES
|
|
|
|
###
|
|
# Cleaning is done on three levels.
|
|
# make clean Delete most generated files
|
|
# Leave enough to build external modules
|
|
# make mrproper Delete the current configuration, and all generated files
|
|
# make distclean Remove editor backup files, patch leftover files and the like
|
|
|
|
# Directories & files removed with 'make clean'
|
|
CLEAN_DIRS += $(MODVERDIR) include/ksym
|
|
|
|
# Directories & files removed with 'make mrproper'
|
|
MRPROPER_DIRS += include/config usr/include include/generated \
|
|
arch/*/include/generated .tmp_objdiff
|
|
MRPROPER_FILES += .config .config.old .version \
|
|
Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
|
|
signing_key.pem signing_key.priv signing_key.x509 \
|
|
x509.genkey extra_certificates signing_key.x509.keyid \
|
|
signing_key.x509.signer vmlinux-gdb.py
|
|
|
|
# clean - Delete most, but leave enough to build external modules
|
|
#
|
|
clean: rm-dirs := $(CLEAN_DIRS)
|
|
clean: rm-files := $(CLEAN_FILES)
|
|
clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
|
|
|
|
PHONY += $(clean-dirs) clean archclean vmlinuxclean
|
|
$(clean-dirs):
|
|
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
|
|
|
|
vmlinuxclean:
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
|
|
$(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
|
|
|
|
clean: archclean vmlinuxclean
|
|
|
|
# mrproper - Delete all generated files, including .config
|
|
#
|
|
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
|
|
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
|
|
mrproper-dirs := $(addprefix _mrproper_,scripts)
|
|
|
|
PHONY += $(mrproper-dirs) mrproper archmrproper
|
|
$(mrproper-dirs):
|
|
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
|
|
|
|
mrproper: clean archmrproper $(mrproper-dirs)
|
|
$(call cmd,rmdirs)
|
|
$(call cmd,rmfiles)
|
|
|
|
# distclean
|
|
#
|
|
PHONY += distclean
|
|
|
|
distclean: mrproper
|
|
@find $(srctree) $(RCS_FIND_IGNORE) \
|
|
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
|
|
-o -name '*.bak' -o -name '#*#' -o -name '*%' \
|
|
-o -name 'core' \) \
|
|
-type f -print | xargs rm -f
|
|
|
|
|
|
# Packaging of the kernel to various formats
|
|
# ---------------------------------------------------------------------------
|
|
# rpm target kept for backward compatibility
|
|
package-dir := scripts/package
|
|
|
|
%src-pkg: FORCE
|
|
$(Q)$(MAKE) $(build)=$(package-dir) $@
|
|
%pkg: include/config/kernel.release FORCE
|
|
$(Q)$(MAKE) $(build)=$(package-dir) $@
|
|
rpm: rpm-pkg
|
|
@echo " WARNING: \"rpm\" target will be removed after Linux 4.18"
|
|
@echo " Please use \"rpm-pkg\" instead."
|
|
|
|
|
|
# Brief documentation of the typical targets used
|
|
# ---------------------------------------------------------------------------
|
|
|
|
boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
|
|
boards := $(sort $(notdir $(boards)))
|
|
board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
|
|
board-dirs := $(sort $(notdir $(board-dirs:/=)))
|
|
|
|
PHONY += help
|
|
help:
|
|
@echo 'Cleaning targets:'
|
|
@echo ' clean - Remove most generated files but keep the config and'
|
|
@echo ' enough build support to build external modules'
|
|
@echo ' mrproper - Remove all generated files + config + various backup files'
|
|
@echo ' distclean - mrproper + remove editor backup and patch files'
|
|
@echo ''
|
|
@echo 'Configuration targets:'
|
|
@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
|
|
@echo ''
|
|
@echo 'Other generic targets:'
|
|
@echo ' all - Build all targets marked with [*]'
|
|
@echo '* vmlinux - Build the bare kernel'
|
|
@echo '* modules - Build all modules'
|
|
@echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
|
|
@echo ' dir/ - Build all files in dir and below'
|
|
@echo ' dir/file.[ois] - Build specified target only'
|
|
@echo ' dir/file.ll - Build the LLVM assembly file'
|
|
@echo ' (requires compiler support for LLVM assembly generation)'
|
|
@echo ' dir/file.lst - Build specified mixed source/assembly target only'
|
|
@echo ' (requires a recent binutils and recent build (System.map))'
|
|
@echo ' dir/file.ko - Build module including final link'
|
|
@echo ' modules_prepare - Set up for building external modules'
|
|
@echo ' tags/TAGS - Generate tags file for editors'
|
|
@echo ' cscope - Generate cscope index'
|
|
@echo ' gtags - Generate GNU GLOBAL index'
|
|
@echo ' kernelrelease - Output the release version string (use with make -s)'
|
|
@echo ' kernelversion - Output the version stored in Makefile (use with make -s)'
|
|
@echo ' image_name - Output the image name (use with make -s)'
|
|
@echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
|
|
echo ' (default: $(INSTALL_HDR_PATH))'; \
|
|
echo ''
|
|
@echo 'Static analysers:'
|
|
@echo ' checkstack - Generate a list of stack hogs'
|
|
@echo ' namespacecheck - Name space analysis on compiled kernel'
|
|
@echo ' versioncheck - Sanity check on version.h usage'
|
|
@echo ' includecheck - Check for duplicate included header files'
|
|
@echo ' export_report - List the usages of all exported symbols'
|
|
@echo ' headers_check - Sanity check on exported headers'
|
|
@echo ' headerdep - Detect inclusion cycles in headers'
|
|
@echo ' coccicheck - Check with Coccinelle'
|
|
@echo ''
|
|
@echo 'Kernel selftest:'
|
|
@echo ' kselftest - Build and run kernel selftest (run as root)'
|
|
@echo ' Build, install, and boot kernel before'
|
|
@echo ' running kselftest on it'
|
|
@echo ' kselftest-clean - Remove all generated kselftest files'
|
|
@echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing'
|
|
@echo ' .config.'
|
|
@echo ''
|
|
@echo 'Userspace tools targets:'
|
|
@echo ' use "make tools/help"'
|
|
@echo ' or "cd tools; make help"'
|
|
@echo ''
|
|
@echo 'Kernel packaging:'
|
|
@$(MAKE) $(build)=$(package-dir) help
|
|
@echo ''
|
|
@echo 'Documentation targets:'
|
|
@$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
|
|
@echo ''
|
|
@echo 'Architecture specific targets ($(SRCARCH)):'
|
|
@$(if $(archhelp),$(archhelp),\
|
|
echo ' No architecture specific help defined for $(SRCARCH)')
|
|
@echo ''
|
|
@$(if $(boards), \
|
|
$(foreach b, $(boards), \
|
|
printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
|
|
echo '')
|
|
@$(if $(board-dirs), \
|
|
$(foreach b, $(board-dirs), \
|
|
printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
|
|
printf " %-16s - Show all of the above\\n" help-boards; \
|
|
echo '')
|
|
|
|
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
|
|
@echo ' make V=2 [targets] 2 => give reason for rebuild of target'
|
|
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
|
|
@echo ' make C=1 [targets] Check re-compiled c source with $$CHECK (sparse by default)'
|
|
@echo ' make C=2 [targets] Force check of all c source with $$CHECK'
|
|
@echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
|
|
@echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
|
|
@echo ' 1: warnings which may be relevant and do not occur too often'
|
|
@echo ' 2: warnings which occur quite often but may still be relevant'
|
|
@echo ' 3: more obscure warnings, can most likely be ignored'
|
|
@echo ' Multiple levels can be combined with W=12 or W=123'
|
|
@echo ''
|
|
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
|
|
@echo 'For further info see the ./README file'
|
|
|
|
|
|
help-board-dirs := $(addprefix help-,$(board-dirs))
|
|
|
|
help-boards: $(help-board-dirs)
|
|
|
|
boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
|
|
|
|
$(help-board-dirs): help-%:
|
|
@echo 'Architecture specific targets ($(SRCARCH) $*):'
|
|
@$(if $(boards-per-dir), \
|
|
$(foreach b, $(boards-per-dir), \
|
|
printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
|
|
echo '')
|
|
|
|
|
|
# Documentation targets
|
|
# ---------------------------------------------------------------------------
|
|
DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
|
|
linkcheckdocs dochelp refcheckdocs
|
|
PHONY += $(DOC_TARGETS)
|
|
$(DOC_TARGETS): scripts_basic FORCE
|
|
$(Q)$(MAKE) $(build)=Documentation $@
|
|
|
|
else # KBUILD_EXTMOD
|
|
|
|
###
|
|
# External module support.
|
|
# When building external modules the kernel used as basis is considered
|
|
# read-only, and no consistency checks are made and the make
|
|
# system is not used on the basis kernel. If updates are required
|
|
# in the basis kernel ordinary make commands (without M=...) must
|
|
# be used.
|
|
#
|
|
# The following are the only valid targets when building external
|
|
# modules.
|
|
# make M=dir clean Delete all automatically generated files
|
|
# make M=dir modules Make all modules in specified dir
|
|
# make M=dir Same as 'make M=dir modules'
|
|
# make M=dir modules_install
|
|
# Install the modules built in the module directory
|
|
# Assumes install directory is already created
|
|
|
|
# We are always building modules
|
|
KBUILD_MODULES := 1
|
|
PHONY += crmodverdir
|
|
crmodverdir:
|
|
$(cmd_crmodverdir)
|
|
|
|
PHONY += $(objtree)/Module.symvers
|
|
$(objtree)/Module.symvers:
|
|
@test -e $(objtree)/Module.symvers || ( \
|
|
echo; \
|
|
echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
|
|
echo " is missing; modules will have no dependencies and modversions."; \
|
|
echo )
|
|
|
|
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
|
|
PHONY += $(module-dirs) modules
|
|
$(module-dirs): crmodverdir $(objtree)/Module.symvers
|
|
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
|
|
|
|
modules: $(module-dirs)
|
|
@$(kecho) ' Building modules, stage 2.';
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
|
|
|
|
PHONY += modules_install
|
|
modules_install: _emodinst_ _emodinst_post
|
|
|
|
install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
|
|
PHONY += _emodinst_
|
|
_emodinst_:
|
|
$(Q)mkdir -p $(MODLIB)/$(install-dir)
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
|
|
|
|
PHONY += _emodinst_post
|
|
_emodinst_post: _emodinst_
|
|
$(call cmd,depmod)
|
|
|
|
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
|
|
|
|
PHONY += $(clean-dirs) clean
|
|
$(clean-dirs):
|
|
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
|
|
|
|
clean: rm-dirs := $(MODVERDIR)
|
|
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
|
|
|
|
PHONY += help
|
|
help:
|
|
@echo ' Building external modules.'
|
|
@echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
|
|
@echo ''
|
|
@echo ' modules - default target, build the module(s)'
|
|
@echo ' modules_install - install the module'
|
|
@echo ' clean - remove generated files in module directory only'
|
|
@echo ''
|
|
|
|
# Dummies...
|
|
PHONY += prepare scripts
|
|
prepare: ;
|
|
scripts: ;
|
|
endif # KBUILD_EXTMOD
|
|
|
|
clean: $(clean-dirs)
|
|
$(call cmd,rmdirs)
|
|
$(call cmd,rmfiles)
|
|
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
|
|
\( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \
|
|
-o -name '*.ko.*' -o -name '*.dtb' -o -name '*.dtb.S' \
|
|
-o -name '*.dwo' -o -name '*.lst' \
|
|
-o -name '*.su' \
|
|
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
|
|
-o -name '*.lex.c' -o -name '*.tab.[ch]' \
|
|
-o -name '*.asn1.[ch]' \
|
|
-o -name '*.symtypes' -o -name 'modules.order' \
|
|
-o -name modules.builtin -o -name '.tmp_*.o.*' \
|
|
-o -name '*.c.[012]*.*' \
|
|
-o -name '*.ll' \
|
|
-o -name '*.gcno' \) -type f -print | xargs rm -f
|
|
|
|
# Generate tags for editors
|
|
# ---------------------------------------------------------------------------
|
|
quiet_cmd_tags = GEN $@
|
|
cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
|
|
|
|
tags TAGS cscope gtags: FORCE
|
|
$(call cmd,tags)
|
|
|
|
# Scripts to check various things for consistency
|
|
# ---------------------------------------------------------------------------
|
|
|
|
PHONY += includecheck versioncheck coccicheck namespacecheck export_report
|
|
|
|
includecheck:
|
|
find $(srctree)/* $(RCS_FIND_IGNORE) \
|
|
-name '*.[hcS]' -type f -print | sort \
|
|
| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
|
|
|
|
versioncheck:
|
|
find $(srctree)/* $(RCS_FIND_IGNORE) \
|
|
-name '*.[hcS]' -type f -print | sort \
|
|
| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
|
|
|
|
coccicheck:
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
|
|
|
|
namespacecheck:
|
|
$(PERL) $(srctree)/scripts/namespace.pl
|
|
|
|
export_report:
|
|
$(PERL) $(srctree)/scripts/export_report.pl
|
|
|
|
endif #ifeq ($(config-targets),1)
|
|
endif #ifeq ($(mixed-targets),1)
|
|
|
|
PHONY += checkstack kernelrelease kernelversion image_name
|
|
|
|
# UML needs a little special treatment here. It wants to use the host
|
|
# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
|
|
# else wants $(ARCH), including people doing cross-builds, which means
|
|
# that $(SUBARCH) doesn't work here.
|
|
ifeq ($(ARCH), um)
|
|
CHECKSTACK_ARCH := $(SUBARCH)
|
|
else
|
|
CHECKSTACK_ARCH := $(ARCH)
|
|
endif
|
|
checkstack:
|
|
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
|
|
$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
|
|
|
|
kernelrelease:
|
|
@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
|
|
|
|
kernelversion:
|
|
@echo $(KERNELVERSION)
|
|
|
|
image_name:
|
|
@echo $(KBUILD_IMAGE)
|
|
|
|
# Clear a bunch of variables before executing the submake
|
|
tools/: FORCE
|
|
$(Q)mkdir -p $(objtree)/tools
|
|
$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(src)/tools/
|
|
|
|
tools/%: FORCE
|
|
$(Q)mkdir -p $(objtree)/tools
|
|
$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(src)/tools/ $*
|
|
|
|
# Single targets
|
|
# ---------------------------------------------------------------------------
|
|
# Single targets are compatible with:
|
|
# - build with mixed source and output
|
|
# - build with separate output dir 'make O=...'
|
|
# - external modules
|
|
#
|
|
# target-dir => where to store outputfile
|
|
# build-dir => directory in kernel source tree to use
|
|
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
build-dir = $(patsubst %/,%,$(dir $@))
|
|
target-dir = $(dir $@)
|
|
else
|
|
zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
|
|
build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
|
|
target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
|
|
endif
|
|
|
|
%.s: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.i: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.o: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.lst: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.s: %.S prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.o: %.S prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.symtypes: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.ll: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
|
|
# Modules
|
|
/: prepare scripts FORCE
|
|
$(cmd_crmodverdir)
|
|
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
|
|
$(build)=$(build-dir)
|
|
# Make sure the latest headers are built for Documentation
|
|
Documentation/ samples/: headers_install
|
|
%/: prepare scripts FORCE
|
|
$(cmd_crmodverdir)
|
|
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
|
|
$(build)=$(build-dir)
|
|
%.ko: prepare scripts FORCE
|
|
$(cmd_crmodverdir)
|
|
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
|
|
$(build)=$(build-dir) $(@:.ko=.o)
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
|
|
|
|
# FIXME Should go into a make.lib or something
|
|
# ===========================================================================
|
|
|
|
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
|
|
cmd_rmdirs = rm -rf $(rm-dirs)
|
|
|
|
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
|
|
cmd_rmfiles = rm -f $(rm-files)
|
|
|
|
# Run depmod only if we have System.map and depmod is executable
|
|
quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
|
|
cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
|
|
$(KERNELRELEASE)
|
|
|
|
# Create temporary dir for module support files
|
|
# clean it up only when building all modules
|
|
cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
|
|
$(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
|
|
|
|
# read all saved command lines
|
|
|
|
cmd_files := $(wildcard .*.cmd $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
|
|
|
|
ifneq ($(cmd_files),)
|
|
$(cmd_files): ; # Do not try to update included dependency files
|
|
include $(cmd_files)
|
|
endif
|
|
|
|
endif # skip-makefile
|
|
|
|
PHONY += FORCE
|
|
FORCE:
|
|
|
|
# Declare the contents of the .PHONY variable as phony. We keep that
|
|
# information in a variable so we can use it in if_changed and friends.
|
|
.PHONY: $(PHONY)
|