forked from Minki/linux
a563591243
Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
43 lines
1.4 KiB
Plaintext
43 lines
1.4 KiB
Plaintext
Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
|
|
|
|
Required parameters:
|
|
-------------------
|
|
|
|
compatible : st,<SoC>-<module>-thermal; should be one of:
|
|
"st,stih415-sas-thermal",
|
|
"st,stih415-mpe-thermal",
|
|
"st,stih416-sas-thermal"
|
|
"st,stih416-mpe-thermal"
|
|
"st,stid127-thermal" or
|
|
"st,stih407-thermal"
|
|
according to the SoC type (stih415, stih416, stid127, stih407)
|
|
and module type (sas or mpe). On stid127 & stih407 there is only
|
|
one die/module, so there is no module type in the compatible
|
|
string.
|
|
clock-names : Should be "thermal".
|
|
See: Documentation/devicetree/bindings/resource-names.txt
|
|
clocks : Phandle of the clock used by the thermal sensor.
|
|
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Optional parameters:
|
|
-------------------
|
|
|
|
reg : For non-sysconf based sensors, this should be the physical base
|
|
address and length of the sensor's registers.
|
|
interrupts : Standard way to define interrupt number.
|
|
Interrupt is mandatory to be defined when compatible is
|
|
"stih416-mpe-thermal".
|
|
NB: For thermal sensor's for which no interrupt has been
|
|
defined, a polling delay of 1000ms will be used to read the
|
|
temperature from device.
|
|
|
|
Example:
|
|
|
|
temp1@fdfe8000 {
|
|
compatible = "st,stih416-mpe-thermal";
|
|
reg = <0xfdfe8000 0x10>;
|
|
clock-names = "thermal";
|
|
clocks = <&clk_m_mpethsens>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>;
|
|
};
|