linux/arch/sparc/include/asm/floppy_32.h
Sam Ravnborg 6baa9b20a6 sparc32: genirq support
The conversion of sparc32 to genirq is based on original work done
by David S. Miller.
Daniel Hellstrom has helped in the conversion and implemented
the shutdowm functionality.
Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20

Test status:
sun4c      - not tested
sun4m,pci  - not tested
sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20)
sun4d      - not tested
leon       - tested on various combinations of leon boards,
             including SMP variants

generic
   Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW
   Allocate 64 IRQs - which is enough even for SS2000
   Use a table of irq_bucket to maintain uses IRQs
      irq_bucket is also used to chain several irq's that
      must be called when the same intrrupt is asserted
   Use irq_link to link a interrupt source to the irq
   All plafforms must now supply their own build_device_irq method
   handler_irq rewriten to use generic irq support

floppy
   Read FLOPPY_IRQ from platform device
   Use generic request_irq to register the floppy interrupt
   Rewrote sparc_floppy_irq to use the generic irq support

pcic:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for pcic
   Use pcic_build_device_irq in pci_time_init
   allocate virtual irqs in pcic_fill_irq

sun4c:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for sun4c
   Use sun4c_build_device_irq in sun4c_init_timers

sun4m:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4m_handler_data that allow easy access to necessary
     data in the mask/unmask functions
   Add a helper method to enable profile_timer (used from smp)
   Added sun4m_build_device_irq
   Use sun4m_build_device_irq in sun4m_init_timers

   TODO:
      There is no replacement for smp_rotate that always scheduled
      next CPU as interrupt target upon an interrupt

sun4d:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4d_handler_data that allow easy access to
   necessary data in mask/unmask fuctions
   Rewrote sun4d_handler_irq to use generic irq support

   TODO:
      The original implmentation of enable/disable had:

          if (irq < NR_IRQS)
               return;

      The new implmentation does not distingush between SBUS and cpu
      interrupts.
      I am no sure what is right here. I assume we need to do
      something for the cpu interrupts.

      I have not succeeded booting my sun4d box (with or without this patch)
      and my understanding of this platfrom is limited.
      So I would be a bit suprised if this works.

leon:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for leon
   Use leon_build_device_irq in leon_init_timers

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Marcel van Nies <morcles@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 22:11:40 -07:00

422 lines
11 KiB
C

/* asm/floppy.h: Sparc specific parts of the Floppy driver.
*
* Copyright (C) 1995 David S. Miller (davem@davemloft.net)
*/
#ifndef __ASM_SPARC_FLOPPY_H
#define __ASM_SPARC_FLOPPY_H
#include <linux/of.h>
#include <linux/of_device.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/idprom.h>
#include <asm/machines.h>
#include <asm/oplib.h>
#include <asm/auxio.h>
#include <asm/irq.h>
/* We don't need no stinkin' I/O port allocation crap. */
#undef release_region
#undef request_region
#define release_region(X, Y) do { } while(0)
#define request_region(X, Y, Z) (1)
/* References:
* 1) Netbsd Sun floppy driver.
* 2) NCR 82077 controller manual
* 3) Intel 82077 controller manual
*/
struct sun_flpy_controller {
volatile unsigned char status_82072; /* Main Status reg. */
#define dcr_82072 status_82072 /* Digital Control reg. */
#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */
volatile unsigned char data_82072; /* Data fifo. */
#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */
volatile unsigned char dor_82077; /* Digital Output reg. */
volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
volatile unsigned char status_82077; /* Main Status Register. */
#define drs_82077 status_82077 /* Digital Rate Select reg. */
volatile unsigned char data_82077; /* Data fifo. */
volatile unsigned char ___unused;
volatile unsigned char dir_82077; /* Digital Input reg. */
#define dcr_82077 dir_82077 /* Config Control reg. */
};
/* You'll only ever find one controller on a SparcStation anyways. */
static struct sun_flpy_controller *sun_fdc = NULL;
extern volatile unsigned char *fdc_status;
struct sun_floppy_ops {
unsigned char (*fd_inb)(int port);
void (*fd_outb)(unsigned char value, int port);
};
static struct sun_floppy_ops sun_fdops;
#define fd_inb(port) sun_fdops.fd_inb(port)
#define fd_outb(value,port) sun_fdops.fd_outb(value,port)
#define fd_enable_dma() sun_fd_enable_dma()
#define fd_disable_dma() sun_fd_disable_dma()
#define fd_request_dma() (0) /* nothing... */
#define fd_free_dma() /* nothing... */
#define fd_clear_dma_ff() /* nothing... */
#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode)
#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr)
#define fd_set_dma_count(count) sun_fd_set_dma_count(count)
#define fd_enable_irq() /* nothing... */
#define fd_disable_irq() /* nothing... */
#define fd_cacheflush(addr, size) /* nothing... */
#define fd_request_irq() sun_fd_request_irq()
#define fd_free_irq() /* nothing... */
#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size))
#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
#endif
/* XXX This isn't really correct. XXX */
#define get_dma_residue(x) (0)
#define FLOPPY0_TYPE 4
#define FLOPPY1_TYPE 0
/* Super paranoid... */
#undef HAVE_DISABLE_HLT
/* Here is where we catch the floppy driver trying to initialize,
* therefore this is where we call the PROM device tree probing
* routine etc. on the Sparc.
*/
#define FDC1 sun_floppy_init()
#define N_FDC 1
#define N_DRIVE 8
/* No 64k boundary crossing problems on the Sparc. */
#define CROSS_64KB(a,s) (0)
/* Routines unique to each controller type on a Sun. */
static void sun_set_dor(unsigned char value, int fdc_82077)
{
if (sparc_cpu_model == sun4c) {
unsigned int bits = 0;
if (value & 0x10)
bits |= AUXIO_FLPY_DSEL;
if ((value & 0x80) == 0)
bits |= AUXIO_FLPY_EJCT;
set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
}
if (fdc_82077) {
sun_fdc->dor_82077 = value;
}
}
static unsigned char sun_read_dir(void)
{
if (sparc_cpu_model == sun4c)
return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
else
return sun_fdc->dir_82077;
}
static unsigned char sun_82072_fd_inb(int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to read unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 4: /* FD_STATUS */
return sun_fdc->status_82072 & ~STATUS_DMA;
case 5: /* FD_DATA */
return sun_fdc->data_82072;
case 7: /* FD_DIR */
return sun_read_dir();
};
panic("sun_82072_fd_inb: How did I get here?");
}
static void sun_82072_fd_outb(unsigned char value, int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to write to unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 2: /* FD_DOR */
sun_set_dor(value, 0);
break;
case 5: /* FD_DATA */
sun_fdc->data_82072 = value;
break;
case 7: /* FD_DCR */
sun_fdc->dcr_82072 = value;
break;
case 4: /* FD_STATUS */
sun_fdc->status_82072 = value;
break;
};
return;
}
static unsigned char sun_82077_fd_inb(int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to read unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 0: /* FD_STATUS_0 */
return sun_fdc->status1_82077;
case 1: /* FD_STATUS_1 */
return sun_fdc->status2_82077;
case 2: /* FD_DOR */
return sun_fdc->dor_82077;
case 3: /* FD_TDR */
return sun_fdc->tapectl_82077;
case 4: /* FD_STATUS */
return sun_fdc->status_82077 & ~STATUS_DMA;
case 5: /* FD_DATA */
return sun_fdc->data_82077;
case 7: /* FD_DIR */
return sun_read_dir();
};
panic("sun_82077_fd_inb: How did I get here?");
}
static void sun_82077_fd_outb(unsigned char value, int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to write to unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 2: /* FD_DOR */
sun_set_dor(value, 1);
break;
case 5: /* FD_DATA */
sun_fdc->data_82077 = value;
break;
case 7: /* FD_DCR */
sun_fdc->dcr_82077 = value;
break;
case 4: /* FD_STATUS */
sun_fdc->status_82077 = value;
break;
case 3: /* FD_TDR */
sun_fdc->tapectl_82077 = value;
break;
};
return;
}
/* For pseudo-dma (Sun floppy drives have no real DMA available to
* them so we must eat the data fifo bytes directly ourselves) we have
* three state variables. doing_pdma tells our inline low-level
* assembly floppy interrupt entry point whether it should sit and eat
* bytes from the fifo or just transfer control up to the higher level
* floppy interrupt c-code. I tried very hard but I could not get the
* pseudo-dma to work in c-code without getting many overruns and
* underruns. If non-zero, doing_pdma encodes the direction of
* the transfer for debugging. 1=read 2=write
*/
extern char *pdma_vaddr;
extern unsigned long pdma_size;
extern volatile int doing_pdma;
/* This is software state */
extern char *pdma_base;
extern unsigned long pdma_areasize;
/* Common routines to all controller types on the Sparc. */
static inline void virtual_dma_init(void)
{
/* nothing... */
}
static inline void sun_fd_disable_dma(void)
{
doing_pdma = 0;
if (pdma_base) {
mmu_unlockarea(pdma_base, pdma_areasize);
pdma_base = NULL;
}
}
static inline void sun_fd_set_dma_mode(int mode)
{
switch(mode) {
case DMA_MODE_READ:
doing_pdma = 1;
break;
case DMA_MODE_WRITE:
doing_pdma = 2;
break;
default:
printk("Unknown dma mode %d\n", mode);
panic("floppy: Giving up...");
}
}
static inline void sun_fd_set_dma_addr(char *buffer)
{
pdma_vaddr = buffer;
}
static inline void sun_fd_set_dma_count(int length)
{
pdma_size = length;
}
static inline void sun_fd_enable_dma(void)
{
pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
pdma_base = pdma_vaddr;
pdma_areasize = pdma_size;
}
extern int sparc_floppy_request_irq(unsigned int irq,
irq_handler_t irq_handler);
static int sun_fd_request_irq(void)
{
static int once = 0;
if (!once) {
once = 1;
return sparc_floppy_request_irq(FLOPPY_IRQ, floppy_interrupt);
} else {
return 0;
}
}
static struct linux_prom_registers fd_regs[2];
static int sun_floppy_init(void)
{
struct platform_device *op;
struct device_node *dp;
char state[128];
phandle tnode, fd_node;
int num_regs;
struct resource r;
use_virtual_dma = 1;
/* Forget it if we aren't on a machine that could possibly
* ever have a floppy drive.
*/
if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
(idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
/* We certainly don't have a floppy controller. */
goto no_sun_fdc;
}
/* Well, try to find one. */
tnode = prom_getchild(prom_root_node);
fd_node = prom_searchsiblings(tnode, "obio");
if(fd_node != 0) {
tnode = prom_getchild(fd_node);
fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
} else {
fd_node = prom_searchsiblings(tnode, "fd");
}
if(fd_node == 0) {
goto no_sun_fdc;
}
/* The sun4m lets us know if the controller is actually usable. */
if(sparc_cpu_model == sun4m &&
prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
if(!strcmp(state, "disabled")) {
goto no_sun_fdc;
}
}
num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
num_regs = (num_regs / sizeof(fd_regs[0]));
prom_apply_obio_ranges(fd_regs, num_regs);
memset(&r, 0, sizeof(r));
r.flags = fd_regs[0].which_io;
r.start = fd_regs[0].phys_addr;
sun_fdc = (struct sun_flpy_controller *)
of_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
/* Look up irq in platform_device.
* We try "SUNW,fdtwo" and "fd"
*/
for_each_node_by_name(dp, "SUNW,fdtwo") {
op = of_find_device_by_node(dp);
if (op)
break;
}
if (!op) {
for_each_node_by_name(dp, "fd") {
op = of_find_device_by_node(dp);
if (op)
break;
}
}
if (!op)
goto no_sun_fdc;
FLOPPY_IRQ = op->archdata.irqs[0];
/* Last minute sanity check... */
if(sun_fdc->status_82072 == 0xff) {
sun_fdc = NULL;
goto no_sun_fdc;
}
sun_fdops.fd_inb = sun_82077_fd_inb;
sun_fdops.fd_outb = sun_82077_fd_outb;
fdc_status = &sun_fdc->status_82077;
if (sun_fdc->dor_82077 == 0x80) {
sun_fdc->dor_82077 = 0x02;
if (sun_fdc->dor_82077 == 0x80) {
sun_fdops.fd_inb = sun_82072_fd_inb;
sun_fdops.fd_outb = sun_82072_fd_outb;
fdc_status = &sun_fdc->status_82072;
}
}
/* Success... */
allowed_drive_mask = 0x01;
return (int) sun_fdc;
no_sun_fdc:
return -1;
}
static int sparc_eject(void)
{
set_dor(0x00, 0xff, 0x90);
udelay(500);
set_dor(0x00, 0x6f, 0x00);
udelay(500);
return 0;
}
#define fd_eject(drive) sparc_eject()
#define EXTRA_FLOPPY_PARAMS
static DEFINE_SPINLOCK(dma_spin_lock);
#define claim_dma_lock() \
({ unsigned long flags; \
spin_lock_irqsave(&dma_spin_lock, flags); \
flags; \
})
#define release_dma_lock(__flags) \
spin_unlock_irqrestore(&dma_spin_lock, __flags);
#endif /* !(__ASM_SPARC_FLOPPY_H) */