forked from Minki/linux
ea5c8ef296
Add support for CEC hardware that relies on low-level pin polling or GPIO interrupts. One example is the Allwinner SoC. But any GPIO-based CEC implementation can use this as well. A GPIO implementation is very suitable as well for debugging: it can use interrupts to detect state changes and report it. Userspace can then verify if the bus traffic is correct. This also makes error injection possible. The disadvantage is that it is hard to get the timings right since linux isn't a hard realtime system. In general on an idle system it works quite well, but under load the timer will miss its mark every so often. The debugfs file /sys/kernel/debug/cec/cecX/status gives some statistics with respect to the timer overruns. When the adapter is unconfigured and the low-level driver supports interrupts, then the interrupt will be used to detect changes. This should be quite accurate. But when the adapter is configured a hrtimer has to be used. The hrtimer implements a state machine where for each state the code will read the bus or drive the bus and go on to the next state. It will re-arm the timer with a delay based on the next state. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
241 lines
6.4 KiB
Plaintext
241 lines
6.4 KiB
Plaintext
#
|
|
# Multimedia device configuration
|
|
#
|
|
|
|
config CEC_CORE
|
|
tristate
|
|
|
|
config CEC_NOTIFIER
|
|
bool
|
|
|
|
config CEC_PIN
|
|
bool
|
|
|
|
menuconfig MEDIA_SUPPORT
|
|
tristate "Multimedia support"
|
|
depends on HAS_IOMEM
|
|
help
|
|
If you want to use Webcams, Video grabber devices and/or TV devices
|
|
enable this option and other options below.
|
|
Additional info and docs are available on the web at
|
|
<https://linuxtv.org>
|
|
|
|
if MEDIA_SUPPORT
|
|
|
|
comment "Multimedia core support"
|
|
|
|
#
|
|
# Multimedia support - automatically enable V4L2 and DVB core
|
|
#
|
|
config MEDIA_CAMERA_SUPPORT
|
|
bool "Cameras/video grabbers support"
|
|
---help---
|
|
Enable support for webcams and video grabbers.
|
|
|
|
Say Y when you have a webcam or a video capture grabber board.
|
|
|
|
config MEDIA_ANALOG_TV_SUPPORT
|
|
bool "Analog TV support"
|
|
---help---
|
|
Enable analog TV support.
|
|
|
|
Say Y when you have a TV board with analog support or with a
|
|
hybrid analog/digital TV chipset.
|
|
|
|
Note: There are several DVB cards that are based on chips that
|
|
support both analog and digital TV. Disabling this option
|
|
will disable support for them.
|
|
|
|
config MEDIA_DIGITAL_TV_SUPPORT
|
|
bool "Digital TV support"
|
|
---help---
|
|
Enable digital TV support.
|
|
|
|
Say Y when you have a board with digital support or a board with
|
|
hybrid digital TV and analog TV.
|
|
|
|
config MEDIA_RADIO_SUPPORT
|
|
bool "AM/FM radio receivers/transmitters support"
|
|
---help---
|
|
Enable AM/FM radio support.
|
|
|
|
Additional info and docs are available on the web at
|
|
<https://linuxtv.org>
|
|
|
|
Say Y when you have a board with radio support.
|
|
|
|
Note: There are several TV cards that are based on chips that
|
|
support radio reception. Disabling this option will
|
|
disable support for them.
|
|
|
|
config MEDIA_SDR_SUPPORT
|
|
bool "Software defined radio support"
|
|
---help---
|
|
Enable software defined radio support.
|
|
|
|
Say Y when you have a software defined radio device.
|
|
|
|
config MEDIA_RC_SUPPORT
|
|
bool "Remote Controller support"
|
|
depends on INPUT
|
|
---help---
|
|
Enable support for Remote Controllers on Linux. This is
|
|
needed in order to support several video capture adapters,
|
|
standalone IR receivers/transmitters, and RF receivers.
|
|
|
|
Enable this option if you have a video capture board even
|
|
if you don't need IR, as otherwise, you may not be able to
|
|
compile the driver for your adapter.
|
|
|
|
Say Y when you have a TV or an IR device.
|
|
|
|
config MEDIA_CEC_SUPPORT
|
|
bool "HDMI CEC support"
|
|
---help---
|
|
Enable support for HDMI CEC (Consumer Electronics Control),
|
|
which is an optional HDMI feature.
|
|
|
|
Say Y when you have an HDMI receiver, transmitter or a USB CEC
|
|
adapter that supports HDMI CEC.
|
|
|
|
source "drivers/media/cec/Kconfig"
|
|
|
|
#
|
|
# Media controller
|
|
# Selectable only for webcam/grabbers, as other drivers don't use it
|
|
#
|
|
|
|
config MEDIA_CONTROLLER
|
|
bool "Media Controller API"
|
|
depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
|
|
---help---
|
|
Enable the media controller API used to query media devices internal
|
|
topology and configure it dynamically.
|
|
|
|
This API is mostly used by camera interfaces in embedded platforms.
|
|
|
|
config MEDIA_CONTROLLER_DVB
|
|
bool "Enable Media controller for DVB (EXPERIMENTAL)"
|
|
depends on MEDIA_CONTROLLER && DVB_CORE
|
|
---help---
|
|
Enable the media controller API support for DVB.
|
|
|
|
This is currently experimental.
|
|
|
|
#
|
|
# Video4Linux support
|
|
# Only enables if one of the V4L2 types (ATV, webcam, radio) is selected
|
|
#
|
|
|
|
config VIDEO_DEV
|
|
tristate
|
|
depends on MEDIA_SUPPORT
|
|
depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
|
|
default y
|
|
|
|
config VIDEO_V4L2_SUBDEV_API
|
|
bool "V4L2 sub-device userspace API"
|
|
depends on VIDEO_DEV && MEDIA_CONTROLLER
|
|
---help---
|
|
Enables the V4L2 sub-device pad-level userspace API used to configure
|
|
video format, size and frame rate between hardware blocks.
|
|
|
|
This API is mostly used by camera interfaces in embedded platforms.
|
|
|
|
source "drivers/media/v4l2-core/Kconfig"
|
|
|
|
#
|
|
# DVB Core
|
|
# Only enables if one of DTV is selected
|
|
#
|
|
|
|
config DVB_CORE
|
|
tristate
|
|
depends on MEDIA_SUPPORT
|
|
depends on MEDIA_DIGITAL_TV_SUPPORT
|
|
default y
|
|
select CRC32
|
|
|
|
config DVB_NET
|
|
bool "DVB Network Support"
|
|
default (NET && INET)
|
|
depends on NET && INET && DVB_CORE
|
|
help
|
|
This option enables DVB Network Support which is a part of the DVB
|
|
standard. It is used, for example, by automatic firmware updates used
|
|
on Set-Top-Boxes. It can also be used to access the Internet via the
|
|
DVB card, if the network provider supports it.
|
|
|
|
You may want to disable the network support on embedded devices. If
|
|
unsure say Y.
|
|
|
|
# This Kconfig option is used by both PCI and USB drivers
|
|
config TTPCI_EEPROM
|
|
tristate
|
|
depends on I2C
|
|
default n
|
|
|
|
source "drivers/media/dvb-core/Kconfig"
|
|
|
|
comment "Media drivers"
|
|
source "drivers/media/rc/Kconfig"
|
|
|
|
#
|
|
# V4L platform/mem2mem drivers
|
|
#
|
|
|
|
source "drivers/media/usb/Kconfig"
|
|
source "drivers/media/pci/Kconfig"
|
|
source "drivers/media/platform/Kconfig"
|
|
source "drivers/media/mmc/Kconfig"
|
|
source "drivers/media/radio/Kconfig"
|
|
|
|
comment "Supported FireWire (IEEE 1394) Adapters"
|
|
depends on DVB_CORE && FIREWIRE
|
|
source "drivers/media/firewire/Kconfig"
|
|
|
|
# Common driver options
|
|
source "drivers/media/common/Kconfig"
|
|
|
|
comment "Media ancillary drivers (tuners, sensors, i2c, spi, frontends)"
|
|
|
|
#
|
|
# Ancillary drivers (tuners, i2c, spi, frontends)
|
|
#
|
|
|
|
config MEDIA_SUBDRV_AUTOSELECT
|
|
bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
|
|
depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT
|
|
depends on HAS_IOMEM
|
|
select I2C
|
|
select I2C_MUX
|
|
default y
|
|
help
|
|
By default, a media driver auto-selects all possible ancillary
|
|
devices such as tuners, sensors, video encoders/decoders and
|
|
frontends, that are used by any of the supported devices.
|
|
|
|
This is generally the right thing to do, except when there
|
|
are strict constraints with regards to the kernel size,
|
|
like on embedded systems.
|
|
|
|
Use this option with care, as deselecting ancillary drivers which
|
|
are, in fact, necessary will result in the lack of the needed
|
|
functionality for your device (it may not tune or may not have
|
|
the needed demodulators).
|
|
|
|
If unsure say Y.
|
|
|
|
config MEDIA_ATTACH
|
|
bool
|
|
depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
|
|
depends on MODULES
|
|
default MODULES
|
|
|
|
source "drivers/media/i2c/Kconfig"
|
|
source "drivers/media/spi/Kconfig"
|
|
source "drivers/media/tuners/Kconfig"
|
|
source "drivers/media/dvb-frontends/Kconfig"
|
|
|
|
endif # MEDIA_SUPPORT
|