forked from Minki/linux
e9fdf122cf
With the previous commit there is no need for the lowlevel driver any more to specify it it uses two or three cells. So simplify accordingly. The only non-trival change affects the pwm-rockchip driver: It used to only support three cells if the hardware supports polarity. Now the default number depends on the device tree which has to match hardware anyhow (and if it doesn't the error is just a bit delayed as a PWM handle with an inverted setting is catched when pwm_apply_state() is called). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
315 lines
7.4 KiB
C
315 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2014 Free Electrons
|
|
* Copyright (C) 2014 Atmel
|
|
*
|
|
* Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/atmel-hlcdc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define ATMEL_HLCDC_PWMCVAL_MASK GENMASK(15, 8)
|
|
#define ATMEL_HLCDC_PWMCVAL(x) (((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK)
|
|
#define ATMEL_HLCDC_PWMPOL BIT(4)
|
|
#define ATMEL_HLCDC_PWMPS_MASK GENMASK(2, 0)
|
|
#define ATMEL_HLCDC_PWMPS_MAX 0x6
|
|
#define ATMEL_HLCDC_PWMPS(x) ((x) & ATMEL_HLCDC_PWMPS_MASK)
|
|
|
|
struct atmel_hlcdc_pwm_errata {
|
|
bool slow_clk_erratum;
|
|
bool div1_clk_erratum;
|
|
};
|
|
|
|
struct atmel_hlcdc_pwm {
|
|
struct pwm_chip chip;
|
|
struct atmel_hlcdc *hlcdc;
|
|
struct clk *cur_clk;
|
|
const struct atmel_hlcdc_pwm_errata *errata;
|
|
};
|
|
|
|
static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct atmel_hlcdc_pwm, chip);
|
|
}
|
|
|
|
static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
|
|
struct atmel_hlcdc *hlcdc = chip->hlcdc;
|
|
unsigned int status;
|
|
int ret;
|
|
|
|
if (state->enabled) {
|
|
struct clk *new_clk = hlcdc->slow_clk;
|
|
u64 pwmcval = state->duty_cycle * 256;
|
|
unsigned long clk_freq;
|
|
u64 clk_period_ns;
|
|
u32 pwmcfg;
|
|
int pres;
|
|
|
|
if (!chip->errata || !chip->errata->slow_clk_erratum) {
|
|
clk_freq = clk_get_rate(new_clk);
|
|
if (!clk_freq)
|
|
return -EINVAL;
|
|
|
|
clk_period_ns = (u64)NSEC_PER_SEC * 256;
|
|
do_div(clk_period_ns, clk_freq);
|
|
}
|
|
|
|
/* Errata: cannot use slow clk on some IP revisions */
|
|
if ((chip->errata && chip->errata->slow_clk_erratum) ||
|
|
clk_period_ns > state->period) {
|
|
new_clk = hlcdc->sys_clk;
|
|
clk_freq = clk_get_rate(new_clk);
|
|
if (!clk_freq)
|
|
return -EINVAL;
|
|
|
|
clk_period_ns = (u64)NSEC_PER_SEC * 256;
|
|
do_div(clk_period_ns, clk_freq);
|
|
}
|
|
|
|
for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
|
|
/* Errata: cannot divide by 1 on some IP revisions */
|
|
if (!pres && chip->errata &&
|
|
chip->errata->div1_clk_erratum)
|
|
continue;
|
|
|
|
if ((clk_period_ns << pres) >= state->period)
|
|
break;
|
|
}
|
|
|
|
if (pres > ATMEL_HLCDC_PWMPS_MAX)
|
|
return -EINVAL;
|
|
|
|
pwmcfg = ATMEL_HLCDC_PWMPS(pres);
|
|
|
|
if (new_clk != chip->cur_clk) {
|
|
u32 gencfg = 0;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(new_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_disable_unprepare(chip->cur_clk);
|
|
chip->cur_clk = new_clk;
|
|
|
|
if (new_clk == hlcdc->sys_clk)
|
|
gencfg = ATMEL_HLCDC_CLKPWMSEL;
|
|
|
|
ret = regmap_update_bits(hlcdc->regmap,
|
|
ATMEL_HLCDC_CFG(0),
|
|
ATMEL_HLCDC_CLKPWMSEL,
|
|
gencfg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
do_div(pwmcval, state->period);
|
|
|
|
/*
|
|
* The PWM duty cycle is configurable from 0/256 to 255/256 of
|
|
* the period cycle. Hence we can't set a duty cycle occupying
|
|
* the whole period cycle if we're asked to.
|
|
* Set it to 255 if pwmcval is greater than 256.
|
|
*/
|
|
if (pwmcval > 255)
|
|
pwmcval = 255;
|
|
|
|
pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
|
|
|
|
if (state->polarity == PWM_POLARITY_NORMAL)
|
|
pwmcfg |= ATMEL_HLCDC_PWMPOL;
|
|
|
|
ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
|
|
ATMEL_HLCDC_PWMCVAL_MASK |
|
|
ATMEL_HLCDC_PWMPS_MASK |
|
|
ATMEL_HLCDC_PWMPOL,
|
|
pwmcfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN,
|
|
ATMEL_HLCDC_PWM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
|
|
status,
|
|
status & ATMEL_HLCDC_PWM,
|
|
10, 0);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS,
|
|
ATMEL_HLCDC_PWM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
|
|
status,
|
|
!(status & ATMEL_HLCDC_PWM),
|
|
10, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_disable_unprepare(chip->cur_clk);
|
|
chip->cur_clk = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops atmel_hlcdc_pwm_ops = {
|
|
.apply = atmel_hlcdc_pwm_apply,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = {
|
|
.slow_clk_erratum = true,
|
|
};
|
|
|
|
static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
|
|
.div1_clk_erratum = true,
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int atmel_hlcdc_pwm_suspend(struct device *dev)
|
|
{
|
|
struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
|
|
|
|
/* Keep the periph clock enabled if the PWM is still running. */
|
|
if (pwm_is_enabled(&chip->chip.pwms[0]))
|
|
clk_disable_unprepare(chip->hlcdc->periph_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_hlcdc_pwm_resume(struct device *dev)
|
|
{
|
|
struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
|
|
struct pwm_state state;
|
|
int ret;
|
|
|
|
pwm_get_state(&chip->chip.pwms[0], &state);
|
|
|
|
/* Re-enable the periph clock it was stopped during suspend. */
|
|
if (!state.enabled) {
|
|
ret = clk_prepare_enable(chip->hlcdc->periph_clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return atmel_hlcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state);
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
|
|
atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
|
|
|
|
static const struct of_device_id atmel_hlcdc_dt_ids[] = {
|
|
{
|
|
.compatible = "atmel,at91sam9n12-hlcdc",
|
|
/* 9n12 has same errata as 9x5 HLCDC PWM */
|
|
.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
|
|
},
|
|
{
|
|
.compatible = "atmel,at91sam9x5-hlcdc",
|
|
.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
|
|
},
|
|
{
|
|
.compatible = "atmel,sama5d2-hlcdc",
|
|
},
|
|
{
|
|
.compatible = "atmel,sama5d3-hlcdc",
|
|
.data = &atmel_hlcdc_pwm_sama5d3_errata,
|
|
},
|
|
{
|
|
.compatible = "atmel,sama5d4-hlcdc",
|
|
.data = &atmel_hlcdc_pwm_sama5d3_errata,
|
|
},
|
|
{ .compatible = "microchip,sam9x60-hlcdc", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, atmel_hlcdc_dt_ids);
|
|
|
|
static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct device *dev = &pdev->dev;
|
|
struct atmel_hlcdc_pwm *chip;
|
|
struct atmel_hlcdc *hlcdc;
|
|
int ret;
|
|
|
|
hlcdc = dev_get_drvdata(dev->parent);
|
|
|
|
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
ret = clk_prepare_enable(hlcdc->periph_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node);
|
|
if (match)
|
|
chip->errata = match->data;
|
|
|
|
chip->hlcdc = hlcdc;
|
|
chip->chip.ops = &atmel_hlcdc_pwm_ops;
|
|
chip->chip.dev = dev;
|
|
chip->chip.npwm = 1;
|
|
|
|
ret = pwmchip_add(&chip->chip);
|
|
if (ret) {
|
|
clk_disable_unprepare(hlcdc->periph_clk);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = pwmchip_remove(&chip->chip);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_disable_unprepare(chip->hlcdc->periph_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = {
|
|
{ .compatible = "atmel,hlcdc-pwm" },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static struct platform_driver atmel_hlcdc_pwm_driver = {
|
|
.driver = {
|
|
.name = "atmel-hlcdc-pwm",
|
|
.of_match_table = atmel_hlcdc_pwm_dt_ids,
|
|
.pm = &atmel_hlcdc_pwm_pm_ops,
|
|
},
|
|
.probe = atmel_hlcdc_pwm_probe,
|
|
.remove = atmel_hlcdc_pwm_remove,
|
|
};
|
|
module_platform_driver(atmel_hlcdc_pwm_driver);
|
|
|
|
MODULE_ALIAS("platform:atmel-hlcdc-pwm");
|
|
MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Atmel HLCDC PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|