forked from Minki/linux
e9b106b8fb
The ni65 and lance ethernet drivers manually program the ISA DMA
controller that is only available on x86 PCs and a few compatible
systems. Trying to build it on ARM results in this error:
ni65.c: In function 'ni65_probe1':
ni65.c:496:62: error: 'DMA1_STAT_REG' undeclared (first use in this function)
((inb(DMA1_STAT_REG) >> 4) & 0x0f)
^
ni65.c:496:62: note: each undeclared identifier is reported only once for each function it appears in
ni65.c:497:63: error: 'DMA2_STAT_REG' undeclared (first use in this function)
| (inb(DMA2_STAT_REG) & 0xf0);
The DMA1_STAT_REG and DMA2_STAT_REG registers are only defined for
alpha, mips, parisc, powerpc and x86, although it is not clear
which subarchitectures actually have them at the correct location.
This patch for now just disables it for ARM, to avoid randconfig
build errors. We could also decide to limit it to the set of
architectures on which it does compile, but that might look more
deliberate than guessing based on where the drivers build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
206 lines
5.9 KiB
Plaintext
206 lines
5.9 KiB
Plaintext
#
|
|
# AMD network device configuration
|
|
#
|
|
|
|
config NET_VENDOR_AMD
|
|
bool "AMD devices"
|
|
default y
|
|
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
|
|
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
|
|
(ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
|
|
---help---
|
|
If you have a network (Ethernet) chipset belonging to this class,
|
|
say Y.
|
|
|
|
Note that the answer to this question does not directly affect
|
|
the kernel: saying N will just case the configurator to skip all
|
|
the questions regarding AMD chipsets. If you say Y, you will be asked
|
|
for your specific chipset/driver in the following questions.
|
|
|
|
if NET_VENDOR_AMD
|
|
|
|
config A2065
|
|
tristate "A2065 support"
|
|
depends on ZORRO
|
|
select CRC32
|
|
---help---
|
|
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
|
|
say N.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called a2065.
|
|
|
|
config AMD8111_ETH
|
|
tristate "AMD 8111 (new PCI LANCE) support"
|
|
depends on PCI
|
|
select CRC32
|
|
select MII
|
|
---help---
|
|
If you have an AMD 8111-based PCI LANCE ethernet card,
|
|
answer Y here and read the Ethernet-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called amd8111e.
|
|
|
|
config LANCE
|
|
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
|
|
depends on ISA && ISA_DMA_API && !ARM
|
|
---help---
|
|
If you have a network (Ethernet) card of this type, say Y and read
|
|
the Ethernet-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
|
|
of this type.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called lance. This is recommended.
|
|
|
|
config PCNET32
|
|
tristate "AMD PCnet32 PCI support"
|
|
depends on PCI
|
|
select CRC32
|
|
select MII
|
|
---help---
|
|
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
|
|
answer Y here and read the Ethernet-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called pcnet32.
|
|
|
|
config ARIADNE
|
|
tristate "Ariadne support"
|
|
depends on ZORRO
|
|
---help---
|
|
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
|
|
Otherwise, say N.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called ariadne.
|
|
|
|
config ARM_AM79C961A
|
|
bool "ARM EBSA110 AM79C961A support"
|
|
depends on ARM && ARCH_EBSA110
|
|
select CRC32
|
|
---help---
|
|
If you wish to compile a kernel for the EBSA-110, then you should
|
|
always answer Y to this.
|
|
|
|
config ATARILANCE
|
|
tristate "Atari LANCE support"
|
|
depends on ATARI
|
|
---help---
|
|
Say Y to include support for several Atari Ethernet adapters based
|
|
on the AMD LANCE chipset: RieblCard (with or without battery), or
|
|
PAMCard VME (also the version by Rhotron, with different addresses).
|
|
|
|
config DECLANCE
|
|
tristate "DEC LANCE ethernet controller support"
|
|
depends on MACH_DECSTATION
|
|
select CRC32
|
|
---help---
|
|
This driver is for the series of Ethernet controllers produced by
|
|
DEC (now Compaq) based on the AMD LANCE chipset, including the
|
|
DEPCA series. (This chipset is better known via the NE2100 cards.)
|
|
|
|
config HPLANCE
|
|
bool "HP on-board LANCE support"
|
|
depends on DIO
|
|
select CRC32
|
|
---help---
|
|
If you want to use the builtin "LANCE" Ethernet controller on an
|
|
HP300 machine, say Y here.
|
|
|
|
config MIPS_AU1X00_ENET
|
|
tristate "MIPS AU1000 Ethernet support"
|
|
depends on MIPS_ALCHEMY
|
|
select PHYLIB
|
|
select CRC32
|
|
---help---
|
|
If you have an Alchemy Semi AU1X00 based system
|
|
say Y. Otherwise, say N.
|
|
|
|
config MVME147_NET
|
|
tristate "MVME147 (LANCE) Ethernet support"
|
|
depends on MVME147
|
|
select CRC32
|
|
---help---
|
|
Support for the on-board Ethernet interface on the Motorola MVME147
|
|
single-board computer. Say Y here to include the
|
|
driver for this chip in your kernel.
|
|
To compile this driver as a module, choose M here.
|
|
|
|
config PCMCIA_NMCLAN
|
|
tristate "New Media PCMCIA support"
|
|
depends on PCMCIA
|
|
help
|
|
Say Y here if you intend to attach a New Media Ethernet or LiveWire
|
|
PCMCIA (PC-card) Ethernet card to your computer.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called nmclan_cs. If unsure, say N.
|
|
|
|
config NI65
|
|
tristate "NI6510 support"
|
|
depends on ISA && ISA_DMA_API && !ARM
|
|
---help---
|
|
If you have a network (Ethernet) card of this type, say Y and read
|
|
the Ethernet-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called ni65.
|
|
|
|
config SUN3LANCE
|
|
tristate "Sun3/Sun3x on-board LANCE support"
|
|
depends on (SUN3 || SUN3X)
|
|
---help---
|
|
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
|
|
featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
|
|
here to compile in the Linux driver for this and enable Ethernet.
|
|
General Linux information on the Sun 3 and 3x series (now
|
|
discontinued) is at
|
|
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
|
|
|
|
If you're not building a kernel for a Sun 3, say N.
|
|
|
|
config SUNLANCE
|
|
tristate "Sun LANCE support"
|
|
depends on SBUS
|
|
select CRC32
|
|
---help---
|
|
This driver supports the "le" interface present on all 32-bit Sparc
|
|
systems, on some older Ultra systems and as an Sbus option. These
|
|
cards are based on the AMD LANCE chipset, which is better known
|
|
via the NE2100 cards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called sunlance.
|
|
|
|
config AMD_XGBE
|
|
tristate "AMD 10GbE Ethernet driver"
|
|
depends on OF_NET && HAS_IOMEM
|
|
select PHYLIB
|
|
select AMD_XGBE_PHY
|
|
select BITREVERSE
|
|
select CRC32
|
|
select PTP_1588_CLOCK
|
|
---help---
|
|
This driver supports the AMD 10GbE Ethernet device found on an
|
|
AMD SoC.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called amd-xgbe.
|
|
|
|
config AMD_XGBE_DCB
|
|
bool "Data Center Bridging (DCB) support"
|
|
default n
|
|
depends on AMD_XGBE && DCB
|
|
---help---
|
|
Say Y here to enable Data Center Bridging (DCB) support in the
|
|
driver.
|
|
|
|
If unsure, say N.
|
|
|
|
endif # NET_VENDOR_AMD
|