forked from Minki/linux
48e2331197
Merge the CPU port registers dump into the master interface registers dump through ethtool, by nesting the ethtool_drvinfo and ethtool_regs structures of the CPU port into the dump. drvinfo->regdump_len will contain the full data length, while regs->len will contain only the master interface registers dump length. This allows for example to dump the CPU port registers on a ZII Dev C board like this: # ethtool -d eth1 0x004: 0x00000000 0x008: 0x0a8000aa 0x010: 0x01000000 0x014: 0x00000000 0x024: 0xf0000102 0x040: 0x6d82c800 0x044: 0x00000020 0x064: 0x40000000 0x084: RCR (Receive Control Register) 0x47c00104 MAX_FL (Maximum frame length) 1984 FCE (Flow control enable) 0 BC_REJ (Broadcast frame reject) 0 PROM (Promiscuous mode) 0 DRT (Disable receive on transmit) 0 LOOP (Internal loopback) 0 0x0c4: TCR (Transmit Control Register) 0x00000004 RFC_PAUSE (Receive frame control pause) 0 TFC_PAUSE (Transmit frame control pause) 0 FDEN (Full duplex enable) 1 HBC (Heartbeat control) 0 GTS (Graceful transmit stop) 0 0x0e4: 0x76735d6d 0x0e8: 0x7e9e8808 0x0ec: 0x00010000 . . . 88E6352 Switch Port Registers ------------------------------ 00: Port Status 0x4d04 Pause Enabled 0 My Pause 1 802.3 PHY Detected 0 Link Status Up Duplex Full Speed 100 or 200 Mbps EEE Enabled 0 Transmitter Paused 0 Flow Control 0 Config Mode 0x4 01: Physical Control 0x003d RGMII Receive Timing Control Default RGMII Transmit Timing Control Default 200 BASE Mode 100 Flow Control's Forced value 0 Force Flow Control 0 Link's Forced value Up Force Link 1 Duplex's Forced value Full Force Duplex 1 Force Speed 100 or 200 Mbps . . . Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
367 lines
9.0 KiB
C
367 lines
9.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Handling of a master device, switching frames via its switch fabric CPU port
|
|
*
|
|
* Copyright (c) 2017 Savoir-faire Linux Inc.
|
|
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
|
*/
|
|
|
|
#include "dsa_priv.h"
|
|
|
|
static int dsa_master_get_regs_len(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int ret = 0;
|
|
int len;
|
|
|
|
if (ops->get_regs_len) {
|
|
len = ops->get_regs_len(dev);
|
|
if (len < 0)
|
|
return len;
|
|
ret += len;
|
|
}
|
|
|
|
ret += sizeof(struct ethtool_drvinfo);
|
|
ret += sizeof(struct ethtool_regs);
|
|
|
|
if (ds->ops->get_regs_len) {
|
|
len = ds->ops->get_regs_len(ds, port);
|
|
if (len < 0)
|
|
return len;
|
|
ret += len;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dsa_master_get_regs(struct net_device *dev,
|
|
struct ethtool_regs *regs, void *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct ethtool_drvinfo *cpu_info;
|
|
struct ethtool_regs *cpu_regs;
|
|
int port = cpu_dp->index;
|
|
int len;
|
|
|
|
if (ops->get_regs_len && ops->get_regs) {
|
|
len = ops->get_regs_len(dev);
|
|
if (len < 0)
|
|
return;
|
|
regs->len = len;
|
|
ops->get_regs(dev, regs, data);
|
|
data += regs->len;
|
|
}
|
|
|
|
cpu_info = (struct ethtool_drvinfo *)data;
|
|
strlcpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
|
|
data += sizeof(*cpu_info);
|
|
cpu_regs = (struct ethtool_regs *)data;
|
|
data += sizeof(*cpu_regs);
|
|
|
|
if (ds->ops->get_regs_len && ds->ops->get_regs) {
|
|
len = ds->ops->get_regs_len(ds, port);
|
|
if (len < 0)
|
|
return;
|
|
cpu_regs->len = len;
|
|
ds->ops->get_regs(ds, port, cpu_regs, data);
|
|
}
|
|
}
|
|
|
|
static void dsa_master_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats,
|
|
uint64_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int count = 0;
|
|
|
|
if (ops->get_sset_count && ops->get_ethtool_stats) {
|
|
count = ops->get_sset_count(dev, ETH_SS_STATS);
|
|
ops->get_ethtool_stats(dev, stats, data);
|
|
}
|
|
|
|
if (ds->ops->get_ethtool_stats)
|
|
ds->ops->get_ethtool_stats(ds, port, data + count);
|
|
}
|
|
|
|
static void dsa_master_get_ethtool_phy_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats,
|
|
uint64_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int count = 0;
|
|
|
|
if (dev->phydev && !ops->get_ethtool_phy_stats) {
|
|
count = phy_ethtool_get_sset_count(dev->phydev);
|
|
if (count >= 0)
|
|
phy_ethtool_get_stats(dev->phydev, stats, data);
|
|
} else if (ops->get_sset_count && ops->get_ethtool_phy_stats) {
|
|
count = ops->get_sset_count(dev, ETH_SS_PHY_STATS);
|
|
ops->get_ethtool_phy_stats(dev, stats, data);
|
|
}
|
|
|
|
if (count < 0)
|
|
count = 0;
|
|
|
|
if (ds->ops->get_ethtool_phy_stats)
|
|
ds->ops->get_ethtool_phy_stats(ds, port, data + count);
|
|
}
|
|
|
|
static int dsa_master_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int count = 0;
|
|
|
|
if (sset == ETH_SS_PHY_STATS && dev->phydev &&
|
|
!ops->get_ethtool_phy_stats)
|
|
count = phy_ethtool_get_sset_count(dev->phydev);
|
|
else if (ops->get_sset_count)
|
|
count = ops->get_sset_count(dev, sset);
|
|
|
|
if (count < 0)
|
|
count = 0;
|
|
|
|
if (ds->ops->get_sset_count)
|
|
count += ds->ops->get_sset_count(ds, cpu_dp->index, sset);
|
|
|
|
return count;
|
|
}
|
|
|
|
static void dsa_master_get_strings(struct net_device *dev, uint32_t stringset,
|
|
uint8_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int len = ETH_GSTRING_LEN;
|
|
int mcount = 0, count;
|
|
unsigned int i;
|
|
uint8_t pfx[4];
|
|
uint8_t *ndata;
|
|
|
|
snprintf(pfx, sizeof(pfx), "p%.2d", port);
|
|
/* We do not want to be NULL-terminated, since this is a prefix */
|
|
pfx[sizeof(pfx) - 1] = '_';
|
|
|
|
if (stringset == ETH_SS_PHY_STATS && dev->phydev &&
|
|
!ops->get_ethtool_phy_stats) {
|
|
mcount = phy_ethtool_get_sset_count(dev->phydev);
|
|
if (mcount < 0)
|
|
mcount = 0;
|
|
else
|
|
phy_ethtool_get_strings(dev->phydev, data);
|
|
} else if (ops->get_sset_count && ops->get_strings) {
|
|
mcount = ops->get_sset_count(dev, stringset);
|
|
if (mcount < 0)
|
|
mcount = 0;
|
|
ops->get_strings(dev, stringset, data);
|
|
}
|
|
|
|
if (ds->ops->get_strings) {
|
|
ndata = data + mcount * len;
|
|
/* This function copies ETH_GSTRINGS_LEN bytes, we will mangle
|
|
* the output after to prepend our CPU port prefix we
|
|
* constructed earlier
|
|
*/
|
|
ds->ops->get_strings(ds, port, stringset, ndata);
|
|
count = ds->ops->get_sset_count(ds, port, stringset);
|
|
for (i = 0; i < count; i++) {
|
|
memmove(ndata + (i * len + sizeof(pfx)),
|
|
ndata + i * len, len - sizeof(pfx));
|
|
memcpy(ndata + i * len, pfx, sizeof(pfx));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int dsa_master_get_phys_port_name(struct net_device *dev,
|
|
char *name, size_t len)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
if (snprintf(name, len, "p%d", cpu_dp->index) >= len)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_master_ethtool_setup(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct ethtool_ops *ops;
|
|
|
|
ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
|
|
if (!ops)
|
|
return -ENOMEM;
|
|
|
|
cpu_dp->orig_ethtool_ops = dev->ethtool_ops;
|
|
if (cpu_dp->orig_ethtool_ops)
|
|
memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops));
|
|
|
|
ops->get_regs_len = dsa_master_get_regs_len;
|
|
ops->get_regs = dsa_master_get_regs;
|
|
ops->get_sset_count = dsa_master_get_sset_count;
|
|
ops->get_ethtool_stats = dsa_master_get_ethtool_stats;
|
|
ops->get_strings = dsa_master_get_strings;
|
|
ops->get_ethtool_phy_stats = dsa_master_get_ethtool_phy_stats;
|
|
|
|
dev->ethtool_ops = ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_master_ethtool_teardown(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
dev->ethtool_ops = cpu_dp->orig_ethtool_ops;
|
|
cpu_dp->orig_ethtool_ops = NULL;
|
|
}
|
|
|
|
static int dsa_master_ndo_setup(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct net_device_ops *ops;
|
|
|
|
if (dev->netdev_ops->ndo_get_phys_port_name)
|
|
return 0;
|
|
|
|
ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
|
|
if (!ops)
|
|
return -ENOMEM;
|
|
|
|
cpu_dp->orig_ndo_ops = dev->netdev_ops;
|
|
if (cpu_dp->orig_ndo_ops)
|
|
memcpy(ops, cpu_dp->orig_ndo_ops, sizeof(*ops));
|
|
|
|
ops->ndo_get_phys_port_name = dsa_master_get_phys_port_name;
|
|
|
|
dev->netdev_ops = ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_master_ndo_teardown(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
dev->netdev_ops = cpu_dp->orig_ndo_ops;
|
|
cpu_dp->orig_ndo_ops = NULL;
|
|
}
|
|
|
|
static ssize_t tagging_show(struct device *d, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct net_device *dev = to_net_dev(d);
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
return sprintf(buf, "%s\n",
|
|
dsa_tag_protocol_to_str(cpu_dp->tag_ops));
|
|
}
|
|
static DEVICE_ATTR_RO(tagging);
|
|
|
|
static struct attribute *dsa_slave_attrs[] = {
|
|
&dev_attr_tagging.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dsa_group = {
|
|
.name = "dsa",
|
|
.attrs = dsa_slave_attrs,
|
|
};
|
|
|
|
static void dsa_master_set_mtu(struct net_device *dev, struct dsa_port *cpu_dp)
|
|
{
|
|
unsigned int mtu = ETH_DATA_LEN + cpu_dp->tag_ops->overhead;
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
if (mtu <= dev->max_mtu) {
|
|
err = dev_set_mtu(dev, mtu);
|
|
if (err)
|
|
netdev_dbg(dev, "Unable to set MTU to include for DSA overheads\n");
|
|
}
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static void dsa_master_reset_mtu(struct net_device *dev)
|
|
{
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
err = dev_set_mtu(dev, ETH_DATA_LEN);
|
|
if (err)
|
|
netdev_dbg(dev,
|
|
"Unable to reset MTU to exclude DSA overheads\n");
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static struct lock_class_key dsa_master_addr_list_lock_key;
|
|
|
|
int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp)
|
|
{
|
|
int ret;
|
|
|
|
dsa_master_set_mtu(dev, cpu_dp);
|
|
|
|
/* If we use a tagging format that doesn't have an ethertype
|
|
* field, make sure that all packets from this point on get
|
|
* sent to the tag format's receive function.
|
|
*/
|
|
wmb();
|
|
|
|
dev->dsa_ptr = cpu_dp;
|
|
lockdep_set_class(&dev->addr_list_lock,
|
|
&dsa_master_addr_list_lock_key);
|
|
|
|
ret = dsa_master_ethtool_setup(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dsa_master_ndo_setup(dev);
|
|
if (ret)
|
|
goto out_err_ethtool_teardown;
|
|
|
|
ret = sysfs_create_group(&dev->dev.kobj, &dsa_group);
|
|
if (ret)
|
|
goto out_err_ndo_teardown;
|
|
|
|
return ret;
|
|
|
|
out_err_ndo_teardown:
|
|
dsa_master_ndo_teardown(dev);
|
|
out_err_ethtool_teardown:
|
|
dsa_master_ethtool_teardown(dev);
|
|
return ret;
|
|
}
|
|
|
|
void dsa_master_teardown(struct net_device *dev)
|
|
{
|
|
sysfs_remove_group(&dev->dev.kobj, &dsa_group);
|
|
dsa_master_ndo_teardown(dev);
|
|
dsa_master_ethtool_teardown(dev);
|
|
dsa_master_reset_mtu(dev);
|
|
|
|
dev->dsa_ptr = NULL;
|
|
|
|
/* If we used a tagging format that doesn't have an ethertype
|
|
* field, make sure that all packets from this point get sent
|
|
* without the tag and go through the regular receive path.
|
|
*/
|
|
wmb();
|
|
}
|