linux/drivers/usb/usbip/vudc_transfer.c
Krzysztof Opasiak 3e448e13a6 usbip: vudc: fix: Clear already_seen flag also for ep0
ep_list inside gadget structure doesn't contain ep0.
It is stored separately in ep0 field.

This causes an urb hang if gadget driver decides to
delay setup handling. On host side this is visible as
timeout error when setting configuration.

This bug can be reproduced using for example any gadget
with mass storage function.

Fixes: abdb295743 ("usbip: vudc: Add vudc_transfer")
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-05 15:08:45 +01:00

509 lines
12 KiB
C

/*
* Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
* Copyright (C) 2015-2016 Samsung Electronics
* Igor Kotrasinski <i.kotrasinsk@samsung.com>
*
* Based on dummy_hcd.c, which is:
* Copyright (C) 2003 David Brownell
* Copyright (C) 2003-2005 Alan Stern
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/usb.h>
#include <linux/timer.h>
#include <linux/usb/ch9.h>
#include "vudc.h"
#define DEV_REQUEST (USB_TYPE_STANDARD | USB_RECIP_DEVICE)
#define DEV_INREQUEST (DEV_REQUEST | USB_DIR_IN)
#define INTF_REQUEST (USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
#define INTF_INREQUEST (INTF_REQUEST | USB_DIR_IN)
#define EP_REQUEST (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
#define EP_INREQUEST (EP_REQUEST | USB_DIR_IN)
static int get_frame_limit(enum usb_device_speed speed)
{
switch (speed) {
case USB_SPEED_LOW:
return 8 /*bytes*/ * 12 /*packets*/;
case USB_SPEED_FULL:
return 64 /*bytes*/ * 19 /*packets*/;
case USB_SPEED_HIGH:
return 512 /*bytes*/ * 13 /*packets*/ * 8 /*uframes*/;
case USB_SPEED_SUPER:
/* Bus speed is 500000 bytes/ms, so use a little less */
return 490000;
default:
/* error */
return -1;
}
}
/*
* handle_control_request() - handles all control transfers
* @udc: pointer to vudc
* @urb: the urb request to handle
* @setup: pointer to the setup data for a USB device control
* request
* @status: pointer to request handling status
*
* Return 0 - if the request was handled
* 1 - if the request wasn't handles
* error code on error
*
* Adapted from drivers/usb/gadget/udc/dummy_hcd.c
*/
static int handle_control_request(struct vudc *udc, struct urb *urb,
struct usb_ctrlrequest *setup,
int *status)
{
struct vep *ep2;
int ret_val = 1;
unsigned int w_index;
unsigned int w_value;
w_index = le16_to_cpu(setup->wIndex);
w_value = le16_to_cpu(setup->wValue);
switch (setup->bRequest) {
case USB_REQ_SET_ADDRESS:
if (setup->bRequestType != DEV_REQUEST)
break;
udc->address = w_value;
ret_val = 0;
*status = 0;
break;
case USB_REQ_SET_FEATURE:
if (setup->bRequestType == DEV_REQUEST) {
ret_val = 0;
switch (w_value) {
case USB_DEVICE_REMOTE_WAKEUP:
break;
case USB_DEVICE_B_HNP_ENABLE:
udc->gadget.b_hnp_enable = 1;
break;
case USB_DEVICE_A_HNP_SUPPORT:
udc->gadget.a_hnp_support = 1;
break;
case USB_DEVICE_A_ALT_HNP_SUPPORT:
udc->gadget.a_alt_hnp_support = 1;
break;
default:
ret_val = -EOPNOTSUPP;
}
if (ret_val == 0) {
udc->devstatus |= (1 << w_value);
*status = 0;
}
} else if (setup->bRequestType == EP_REQUEST) {
/* endpoint halt */
ep2 = vudc_find_endpoint(udc, w_index);
if (!ep2 || ep2->ep.name == udc->ep[0].ep.name) {
ret_val = -EOPNOTSUPP;
break;
}
ep2->halted = 1;
ret_val = 0;
*status = 0;
}
break;
case USB_REQ_CLEAR_FEATURE:
if (setup->bRequestType == DEV_REQUEST) {
ret_val = 0;
switch (w_value) {
case USB_DEVICE_REMOTE_WAKEUP:
w_value = USB_DEVICE_REMOTE_WAKEUP;
break;
case USB_DEVICE_U1_ENABLE:
case USB_DEVICE_U2_ENABLE:
case USB_DEVICE_LTM_ENABLE:
ret_val = -EOPNOTSUPP;
break;
default:
ret_val = -EOPNOTSUPP;
break;
}
if (ret_val == 0) {
udc->devstatus &= ~(1 << w_value);
*status = 0;
}
} else if (setup->bRequestType == EP_REQUEST) {
/* endpoint halt */
ep2 = vudc_find_endpoint(udc, w_index);
if (!ep2) {
ret_val = -EOPNOTSUPP;
break;
}
if (!ep2->wedged)
ep2->halted = 0;
ret_val = 0;
*status = 0;
}
break;
case USB_REQ_GET_STATUS:
if (setup->bRequestType == DEV_INREQUEST
|| setup->bRequestType == INTF_INREQUEST
|| setup->bRequestType == EP_INREQUEST) {
char *buf;
/*
* device: remote wakeup, selfpowered
* interface: nothing
* endpoint: halt
*/
buf = (char *)urb->transfer_buffer;
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType == EP_INREQUEST) {
ep2 = vudc_find_endpoint(udc, w_index);
if (!ep2) {
ret_val = -EOPNOTSUPP;
break;
}
buf[0] = ep2->halted;
} else if (setup->bRequestType ==
DEV_INREQUEST) {
buf[0] = (u8)udc->devstatus;
} else
buf[0] = 0;
}
if (urb->transfer_buffer_length > 1)
buf[1] = 0;
urb->actual_length = min_t(u32, 2,
urb->transfer_buffer_length);
ret_val = 0;
*status = 0;
}
break;
}
return ret_val;
}
/* Adapted from dummy_hcd.c ; caller must hold lock */
static int transfer(struct vudc *udc,
struct urb *urb, struct vep *ep, int limit)
{
struct vrequest *req;
int sent = 0;
top:
/* if there's no request queued, the device is NAKing; return */
list_for_each_entry(req, &ep->req_queue, req_entry) {
unsigned int host_len, dev_len, len;
void *ubuf_pos, *rbuf_pos;
int is_short, to_host;
int rescan = 0;
/*
* 1..N packets of ep->ep.maxpacket each ... the last one
* may be short (including zero length).
*
* writer can send a zlp explicitly (length 0) or implicitly
* (length mod maxpacket zero, and 'zero' flag); they always
* terminate reads.
*/
host_len = urb->transfer_buffer_length - urb->actual_length;
dev_len = req->req.length - req->req.actual;
len = min(host_len, dev_len);
to_host = usb_pipein(urb->pipe);
if (unlikely(len == 0))
is_short = 1;
else {
/* send multiple of maxpacket first, then remainder */
if (len >= ep->ep.maxpacket) {
is_short = 0;
if (len % ep->ep.maxpacket > 0)
rescan = 1;
len -= len % ep->ep.maxpacket;
} else {
is_short = 1;
}
ubuf_pos = urb->transfer_buffer + urb->actual_length;
rbuf_pos = req->req.buf + req->req.actual;
if (urb->pipe & USB_DIR_IN)
memcpy(ubuf_pos, rbuf_pos, len);
else
memcpy(rbuf_pos, ubuf_pos, len);
urb->actual_length += len;
req->req.actual += len;
sent += len;
}
/*
* short packets terminate, maybe with overflow/underflow.
* it's only really an error to write too much.
*
* partially filling a buffer optionally blocks queue advances
* (so completion handlers can clean up the queue) but we don't
* need to emulate such data-in-flight.
*/
if (is_short) {
if (host_len == dev_len) {
req->req.status = 0;
urb->status = 0;
} else if (to_host) {
req->req.status = 0;
if (dev_len > host_len)
urb->status = -EOVERFLOW;
else
urb->status = 0;
} else {
urb->status = 0;
if (host_len > dev_len)
req->req.status = -EOVERFLOW;
else
req->req.status = 0;
}
/* many requests terminate without a short packet */
/* also check if we need to send zlp */
} else {
if (req->req.length == req->req.actual) {
if (req->req.zero && to_host)
rescan = 1;
else
req->req.status = 0;
}
if (urb->transfer_buffer_length == urb->actual_length) {
if (urb->transfer_flags & URB_ZERO_PACKET &&
!to_host)
rescan = 1;
else
urb->status = 0;
}
}
/* device side completion --> continuable */
if (req->req.status != -EINPROGRESS) {
list_del_init(&req->req_entry);
spin_unlock(&udc->lock);
usb_gadget_giveback_request(&ep->ep, &req->req);
spin_lock(&udc->lock);
/* requests might have been unlinked... */
rescan = 1;
}
/* host side completion --> terminate */
if (urb->status != -EINPROGRESS)
break;
/* rescan to continue with any other queued i/o */
if (rescan)
goto top;
}
return sent;
}
static void v_timer(unsigned long _vudc)
{
struct vudc *udc = (struct vudc *) _vudc;
struct transfer_timer *timer = &udc->tr_timer;
struct urbp *urb_p, *tmp;
unsigned long flags;
struct usb_ep *_ep;
struct vep *ep;
int ret = 0;
int total, limit;
spin_lock_irqsave(&udc->lock, flags);
total = get_frame_limit(udc->gadget.speed);
if (total < 0) { /* unknown speed, or not set yet */
timer->state = VUDC_TR_IDLE;
spin_unlock_irqrestore(&udc->lock, flags);
return;
}
/* is it next frame now? */
if (time_after(jiffies, timer->frame_start + msecs_to_jiffies(1))) {
timer->frame_limit = total;
/* FIXME: how to make it accurate? */
timer->frame_start = jiffies;
} else {
total = timer->frame_limit;
}
/* We have to clear ep0 flags separately as it's not on the list */
udc->ep[0].already_seen = 0;
list_for_each_entry(_ep, &udc->gadget.ep_list, ep_list) {
ep = to_vep(_ep);
ep->already_seen = 0;
}
restart:
list_for_each_entry_safe(urb_p, tmp, &udc->urb_queue, urb_entry) {
struct urb *urb = urb_p->urb;
ep = urb_p->ep;
if (urb->unlinked)
goto return_urb;
if (timer->state != VUDC_TR_RUNNING)
continue;
if (!ep) {
urb->status = -EPROTO;
goto return_urb;
}
/* Used up bandwidth? */
if (total <= 0 && ep->type == USB_ENDPOINT_XFER_BULK)
continue;
if (ep->already_seen)
continue;
ep->already_seen = 1;
if (ep == &udc->ep[0] && urb_p->new) {
ep->setup_stage = 1;
urb_p->new = 0;
}
if (ep->halted && !ep->setup_stage) {
urb->status = -EPIPE;
goto return_urb;
}
if (ep == &udc->ep[0] && ep->setup_stage) {
/* TODO - flush any stale requests */
ep->setup_stage = 0;
ep->halted = 0;
ret = handle_control_request(udc, urb,
(struct usb_ctrlrequest *) urb->setup_packet,
(&urb->status));
if (ret > 0) {
spin_unlock(&udc->lock);
ret = udc->driver->setup(&udc->gadget,
(struct usb_ctrlrequest *)
urb->setup_packet);
spin_lock(&udc->lock);
}
if (ret >= 0) {
/* no delays (max 64kb data stage) */
limit = 64 * 1024;
goto treat_control_like_bulk;
} else {
urb->status = -EPIPE;
urb->actual_length = 0;
goto return_urb;
}
}
limit = total;
switch (ep->type) {
case USB_ENDPOINT_XFER_ISOC:
/* TODO: support */
urb->status = -EXDEV;
break;
case USB_ENDPOINT_XFER_INT:
/*
* TODO: figure out bandwidth guarantees
* for now, give unlimited bandwidth
*/
limit += urb->transfer_buffer_length;
/* fallthrough */
default:
treat_control_like_bulk:
total -= transfer(udc, urb, ep, limit);
}
if (urb->status == -EINPROGRESS)
continue;
return_urb:
if (ep)
ep->already_seen = ep->setup_stage = 0;
spin_lock(&udc->lock_tx);
list_del(&urb_p->urb_entry);
if (!urb->unlinked) {
v_enqueue_ret_submit(udc, urb_p);
} else {
v_enqueue_ret_unlink(udc, urb_p->seqnum,
urb->unlinked);
free_urbp_and_urb(urb_p);
}
wake_up(&udc->tx_waitq);
spin_unlock(&udc->lock_tx);
goto restart;
}
/* TODO - also wait on empty usb_request queues? */
if (list_empty(&udc->urb_queue))
timer->state = VUDC_TR_IDLE;
else
mod_timer(&timer->timer,
timer->frame_start + msecs_to_jiffies(1));
spin_unlock_irqrestore(&udc->lock, flags);
}
/* All timer functions are run with udc->lock held */
void v_init_timer(struct vudc *udc)
{
struct transfer_timer *t = &udc->tr_timer;
setup_timer(&t->timer, v_timer, (unsigned long) udc);
t->state = VUDC_TR_STOPPED;
}
void v_start_timer(struct vudc *udc)
{
struct transfer_timer *t = &udc->tr_timer;
dev_dbg(&udc->pdev->dev, "timer start");
switch (t->state) {
case VUDC_TR_RUNNING:
return;
case VUDC_TR_IDLE:
return v_kick_timer(udc, jiffies);
case VUDC_TR_STOPPED:
t->state = VUDC_TR_IDLE;
t->frame_start = jiffies;
t->frame_limit = get_frame_limit(udc->gadget.speed);
return v_kick_timer(udc, jiffies);
}
}
void v_kick_timer(struct vudc *udc, unsigned long time)
{
struct transfer_timer *t = &udc->tr_timer;
dev_dbg(&udc->pdev->dev, "timer kick");
switch (t->state) {
case VUDC_TR_RUNNING:
return;
case VUDC_TR_IDLE:
t->state = VUDC_TR_RUNNING;
/* fallthrough */
case VUDC_TR_STOPPED:
/* we may want to kick timer to unqueue urbs */
mod_timer(&t->timer, time);
}
}
void v_stop_timer(struct vudc *udc)
{
struct transfer_timer *t = &udc->tr_timer;
/* timer itself will take care of stopping */
dev_dbg(&udc->pdev->dev, "timer stop");
t->state = VUDC_TR_STOPPED;
}