forked from Minki/linux
78e92006f4
The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Acked-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
821 lines
20 KiB
C
821 lines
20 KiB
C
/*
|
|
* pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
|
|
*
|
|
* Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
|
|
*
|
|
* based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
|
|
* by Dany Salman <salmandany@yahoo.fr>
|
|
* Copyright (c) 2004 TDF
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include "demux.h"
|
|
#include "dmxdev.h"
|
|
#include "dvb_demux.h"
|
|
#include "dvb_frontend.h"
|
|
#include "dvb_net.h"
|
|
#include "dvbdev.h"
|
|
#include "tda1004x.h"
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
#define DRIVER_NAME "pluto2"
|
|
|
|
#define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */
|
|
#define REG_PCAR 0x0020 /* PC address register */
|
|
#define REG_TSCR 0x0024 /* TS ctrl & status */
|
|
#define REG_MISC 0x0028 /* miscellaneous */
|
|
#define REG_MMAC 0x002c /* MSB MAC address */
|
|
#define REG_IMAC 0x0030 /* ISB MAC address */
|
|
#define REG_LMAC 0x0034 /* LSB MAC address */
|
|
#define REG_SPID 0x0038 /* SPI data */
|
|
#define REG_SLCS 0x003c /* serial links ctrl/status */
|
|
|
|
#define PID0_NOFIL (0x0001 << 16)
|
|
#define PIDn_ENP (0x0001 << 15)
|
|
#define PID0_END (0x0001 << 14)
|
|
#define PID0_AFIL (0x0001 << 13)
|
|
#define PIDn_PID (0x1fff << 0)
|
|
|
|
#define TSCR_NBPACKETS (0x00ff << 24)
|
|
#define TSCR_DEM (0x0001 << 17)
|
|
#define TSCR_DE (0x0001 << 16)
|
|
#define TSCR_RSTN (0x0001 << 15)
|
|
#define TSCR_MSKO (0x0001 << 14)
|
|
#define TSCR_MSKA (0x0001 << 13)
|
|
#define TSCR_MSKL (0x0001 << 12)
|
|
#define TSCR_OVR (0x0001 << 11)
|
|
#define TSCR_AFUL (0x0001 << 10)
|
|
#define TSCR_LOCK (0x0001 << 9)
|
|
#define TSCR_IACK (0x0001 << 8)
|
|
#define TSCR_ADEF (0x007f << 0)
|
|
|
|
#define MISC_DVR (0x0fff << 4)
|
|
#define MISC_ALED (0x0001 << 3)
|
|
#define MISC_FRST (0x0001 << 2)
|
|
#define MISC_LED1 (0x0001 << 1)
|
|
#define MISC_LED0 (0x0001 << 0)
|
|
|
|
#define SPID_SPIDR (0x00ff << 0)
|
|
|
|
#define SLCS_SCL (0x0001 << 7)
|
|
#define SLCS_SDA (0x0001 << 6)
|
|
#define SLCS_CSN (0x0001 << 2)
|
|
#define SLCS_OVR (0x0001 << 1)
|
|
#define SLCS_SWC (0x0001 << 0)
|
|
|
|
#define TS_DMA_PACKETS (8)
|
|
#define TS_DMA_BYTES (188 * TS_DMA_PACKETS)
|
|
|
|
#define I2C_ADDR_TDA10046 0x10
|
|
#define I2C_ADDR_TUA6034 0xc2
|
|
#define NHWFILTERS 8
|
|
|
|
struct pluto {
|
|
/* pci */
|
|
struct pci_dev *pdev;
|
|
u8 __iomem *io_mem;
|
|
|
|
/* dvb */
|
|
struct dmx_frontend hw_frontend;
|
|
struct dmx_frontend mem_frontend;
|
|
struct dmxdev dmxdev;
|
|
struct dvb_adapter dvb_adapter;
|
|
struct dvb_demux demux;
|
|
struct dvb_frontend *fe;
|
|
struct dvb_net dvbnet;
|
|
unsigned int full_ts_users;
|
|
unsigned int users;
|
|
|
|
/* i2c */
|
|
struct i2c_algo_bit_data i2c_bit;
|
|
struct i2c_adapter i2c_adap;
|
|
unsigned int i2cbug;
|
|
|
|
/* irq */
|
|
unsigned int overflow;
|
|
|
|
/* dma */
|
|
dma_addr_t dma_addr;
|
|
u8 dma_buf[TS_DMA_BYTES];
|
|
u8 dummy[4096];
|
|
};
|
|
|
|
static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
|
|
{
|
|
return container_of(feed->demux, struct pluto, demux);
|
|
}
|
|
|
|
static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
|
|
{
|
|
return container_of(fe->dvb, struct pluto, dvb_adapter);
|
|
}
|
|
|
|
static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
|
|
{
|
|
return readl(&pluto->io_mem[reg]);
|
|
}
|
|
|
|
static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
|
|
{
|
|
writel(val, &pluto->io_mem[reg]);
|
|
}
|
|
|
|
static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
|
|
{
|
|
u32 val = readl(&pluto->io_mem[reg]);
|
|
val &= ~mask;
|
|
val |= bits;
|
|
writel(val, &pluto->io_mem[reg]);
|
|
}
|
|
|
|
static void pluto_write_tscr(struct pluto *pluto, u32 val)
|
|
{
|
|
/* set the number of packets */
|
|
val &= ~TSCR_ADEF;
|
|
val |= TS_DMA_PACKETS / 2;
|
|
|
|
pluto_writereg(pluto, REG_TSCR, val);
|
|
}
|
|
|
|
static void pluto_setsda(void *data, int state)
|
|
{
|
|
struct pluto *pluto = data;
|
|
|
|
if (state)
|
|
pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
|
|
else
|
|
pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
|
|
}
|
|
|
|
static void pluto_setscl(void *data, int state)
|
|
{
|
|
struct pluto *pluto = data;
|
|
|
|
if (state)
|
|
pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
|
|
else
|
|
pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
|
|
|
|
/* try to detect i2c_inb() to workaround hardware bug:
|
|
* reset SDA to high after SCL has been set to low */
|
|
if ((state) && (pluto->i2cbug == 0)) {
|
|
pluto->i2cbug = 1;
|
|
} else {
|
|
if ((!state) && (pluto->i2cbug == 1))
|
|
pluto_setsda(pluto, 1);
|
|
pluto->i2cbug = 0;
|
|
}
|
|
}
|
|
|
|
static int pluto_getsda(void *data)
|
|
{
|
|
struct pluto *pluto = data;
|
|
|
|
return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
|
|
}
|
|
|
|
static int pluto_getscl(void *data)
|
|
{
|
|
struct pluto *pluto = data;
|
|
|
|
return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
|
|
}
|
|
|
|
static void pluto_reset_frontend(struct pluto *pluto, int reenable)
|
|
{
|
|
u32 val = pluto_readreg(pluto, REG_MISC);
|
|
|
|
if (val & MISC_FRST) {
|
|
val &= ~MISC_FRST;
|
|
pluto_writereg(pluto, REG_MISC, val);
|
|
}
|
|
if (reenable) {
|
|
val |= MISC_FRST;
|
|
pluto_writereg(pluto, REG_MISC, val);
|
|
}
|
|
}
|
|
|
|
static void pluto_reset_ts(struct pluto *pluto, int reenable)
|
|
{
|
|
u32 val = pluto_readreg(pluto, REG_TSCR);
|
|
|
|
if (val & TSCR_RSTN) {
|
|
val &= ~TSCR_RSTN;
|
|
pluto_write_tscr(pluto, val);
|
|
}
|
|
if (reenable) {
|
|
val |= TSCR_RSTN;
|
|
pluto_write_tscr(pluto, val);
|
|
}
|
|
}
|
|
|
|
static void pluto_set_dma_addr(struct pluto *pluto)
|
|
{
|
|
pluto_writereg(pluto, REG_PCAR, cpu_to_le32(pluto->dma_addr));
|
|
}
|
|
|
|
static int __devinit pluto_dma_map(struct pluto *pluto)
|
|
{
|
|
pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
|
|
TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
|
|
|
|
return pci_dma_mapping_error(pluto->dma_addr);
|
|
}
|
|
|
|
static void pluto_dma_unmap(struct pluto *pluto)
|
|
{
|
|
pci_unmap_single(pluto->pdev, pluto->dma_addr,
|
|
TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
|
|
}
|
|
|
|
static int pluto_start_feed(struct dvb_demux_feed *f)
|
|
{
|
|
struct pluto *pluto = feed_to_pluto(f);
|
|
|
|
/* enable PID filtering */
|
|
if (pluto->users++ == 0)
|
|
pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
|
|
|
|
if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
|
|
pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
|
|
else if (pluto->full_ts_users++ == 0)
|
|
pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pluto_stop_feed(struct dvb_demux_feed *f)
|
|
{
|
|
struct pluto *pluto = feed_to_pluto(f);
|
|
|
|
/* disable PID filtering */
|
|
if (--pluto->users == 0)
|
|
pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
|
|
|
|
if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
|
|
pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
|
|
else if (--pluto->full_ts_users == 0)
|
|
pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
|
|
{
|
|
/* synchronize the DMA transfer with the CPU
|
|
* first so that we see updated contents. */
|
|
pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
|
|
TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
|
|
|
|
/* Workaround for broken hardware:
|
|
* [1] On startup NBPACKETS seems to contain an uninitialized value,
|
|
* but no packets have been transfered.
|
|
* [2] Sometimes (actually very often) NBPACKETS stays at zero
|
|
* although one packet has been transfered.
|
|
* [3] Sometimes (actually rarely), the card gets into an erroneous
|
|
* mode where it continuously generates interrupts, claiming it
|
|
* has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
|
|
* has been transfered. Only a reset seems to solve this
|
|
*/
|
|
if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
|
|
unsigned int i = 0;
|
|
while (pluto->dma_buf[i] == 0x47)
|
|
i += 188;
|
|
nbpackets = i / 188;
|
|
if (i == 0) {
|
|
pluto_reset_ts(pluto, 1);
|
|
dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
|
|
}
|
|
}
|
|
|
|
dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
|
|
|
|
/* clear the dma buffer. this is needed to be able to identify
|
|
* new valid ts packets above */
|
|
memset(pluto->dma_buf, 0, nbpackets * 188);
|
|
|
|
/* reset the dma address */
|
|
pluto_set_dma_addr(pluto);
|
|
|
|
/* sync the buffer and give it back to the card */
|
|
pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
|
|
TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
|
|
}
|
|
|
|
static irqreturn_t pluto_irq(int irq, void *dev_id)
|
|
{
|
|
struct pluto *pluto = dev_id;
|
|
u32 tscr;
|
|
|
|
/* check whether an interrupt occured on this device */
|
|
tscr = pluto_readreg(pluto, REG_TSCR);
|
|
if (!(tscr & (TSCR_DE | TSCR_OVR)))
|
|
return IRQ_NONE;
|
|
|
|
if (tscr == 0xffffffff) {
|
|
// FIXME: maybe recover somehow
|
|
dev_err(&pluto->pdev->dev, "card hung up :(\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* dma end interrupt */
|
|
if (tscr & TSCR_DE) {
|
|
pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
|
|
/* overflow interrupt */
|
|
if (tscr & TSCR_OVR)
|
|
pluto->overflow++;
|
|
if (pluto->overflow) {
|
|
dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
|
|
pluto->overflow);
|
|
pluto_reset_ts(pluto, 1);
|
|
pluto->overflow = 0;
|
|
}
|
|
} else if (tscr & TSCR_OVR) {
|
|
pluto->overflow++;
|
|
}
|
|
|
|
/* ACK the interrupt */
|
|
pluto_write_tscr(pluto, tscr | TSCR_IACK);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void __devinit pluto_enable_irqs(struct pluto *pluto)
|
|
{
|
|
u32 val = pluto_readreg(pluto, REG_TSCR);
|
|
|
|
/* disable AFUL and LOCK interrupts */
|
|
val |= (TSCR_MSKA | TSCR_MSKL);
|
|
/* enable DMA and OVERFLOW interrupts */
|
|
val &= ~(TSCR_DEM | TSCR_MSKO);
|
|
/* clear pending interrupts */
|
|
val |= TSCR_IACK;
|
|
|
|
pluto_write_tscr(pluto, val);
|
|
}
|
|
|
|
static void pluto_disable_irqs(struct pluto *pluto)
|
|
{
|
|
u32 val = pluto_readreg(pluto, REG_TSCR);
|
|
|
|
/* disable all interrupts */
|
|
val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
|
|
/* clear pending interrupts */
|
|
val |= TSCR_IACK;
|
|
|
|
pluto_write_tscr(pluto, val);
|
|
}
|
|
|
|
static int __devinit pluto_hw_init(struct pluto *pluto)
|
|
{
|
|
pluto_reset_frontend(pluto, 1);
|
|
|
|
/* set automatic LED control by FPGA */
|
|
pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
|
|
|
|
/* set data endianess */
|
|
#ifdef __LITTLE_ENDIAN
|
|
pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
|
|
#else
|
|
pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
|
|
#endif
|
|
/* map DMA and set address */
|
|
pluto_dma_map(pluto);
|
|
pluto_set_dma_addr(pluto);
|
|
|
|
/* enable interrupts */
|
|
pluto_enable_irqs(pluto);
|
|
|
|
/* reset TS logic */
|
|
pluto_reset_ts(pluto, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pluto_hw_exit(struct pluto *pluto)
|
|
{
|
|
/* disable interrupts */
|
|
pluto_disable_irqs(pluto);
|
|
|
|
pluto_reset_ts(pluto, 0);
|
|
|
|
/* LED: disable automatic control, enable yellow, disable green */
|
|
pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
|
|
|
|
/* unmap DMA */
|
|
pluto_dma_unmap(pluto);
|
|
|
|
pluto_reset_frontend(pluto, 0);
|
|
}
|
|
|
|
static inline u32 divide(u32 numerator, u32 denominator)
|
|
{
|
|
if (denominator == 0)
|
|
return ~0;
|
|
|
|
return (numerator + denominator / 2) / denominator;
|
|
}
|
|
|
|
/* LG Innotek TDTE-E001P (Infineon TUA6034) */
|
|
static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *p)
|
|
{
|
|
struct pluto *pluto = frontend_to_pluto(fe);
|
|
struct i2c_msg msg;
|
|
int ret;
|
|
u8 buf[4];
|
|
u32 div;
|
|
|
|
// Fref = 166.667 Hz
|
|
// Fref * 3 = 500.000 Hz
|
|
// IF = 36166667
|
|
// IF / Fref = 217
|
|
//div = divide(p->frequency + 36166667, 166667);
|
|
div = divide(p->frequency * 3, 500000) + 217;
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = (div >> 0) & 0xff;
|
|
|
|
if (p->frequency < 611000000)
|
|
buf[2] = 0xb4;
|
|
else if (p->frequency < 811000000)
|
|
buf[2] = 0xbc;
|
|
else
|
|
buf[2] = 0xf4;
|
|
|
|
// VHF: 174-230 MHz
|
|
// center: 350 MHz
|
|
// UHF: 470-862 MHz
|
|
if (p->frequency < 350000000)
|
|
buf[3] = 0x02;
|
|
else
|
|
buf[3] = 0x04;
|
|
|
|
if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
|
|
buf[3] |= 0x08;
|
|
|
|
if (sizeof(buf) == 6) {
|
|
buf[4] = buf[2];
|
|
buf[4] &= ~0x1c;
|
|
buf[4] |= 0x18;
|
|
|
|
buf[5] = (0 << 7) | (2 << 4);
|
|
}
|
|
|
|
msg.addr = I2C_ADDR_TUA6034 >> 1;
|
|
msg.flags = 0;
|
|
msg.buf = buf;
|
|
msg.len = sizeof(buf);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
else if (ret == 0)
|
|
return -EREMOTEIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pluto2_request_firmware(struct dvb_frontend *fe,
|
|
const struct firmware **fw, char *name)
|
|
{
|
|
struct pluto *pluto = frontend_to_pluto(fe);
|
|
|
|
return request_firmware(fw, name, &pluto->pdev->dev);
|
|
}
|
|
|
|
static struct tda1004x_config pluto2_fe_config __devinitdata = {
|
|
.demod_address = I2C_ADDR_TDA10046 >> 1,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_DEFAULT,
|
|
.if_freq = TDA10046_FREQ_3617,
|
|
.request_firmware = pluto2_request_firmware,
|
|
};
|
|
|
|
static int __devinit frontend_init(struct pluto *pluto)
|
|
{
|
|
int ret;
|
|
|
|
pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
|
|
if (!pluto->fe) {
|
|
dev_err(&pluto->pdev->dev, "could not attach frontend\n");
|
|
return -ENODEV;
|
|
}
|
|
pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
|
|
|
|
ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
|
|
if (ret < 0) {
|
|
if (pluto->fe->ops.release)
|
|
pluto->fe->ops.release(pluto->fe);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __devinit pluto_read_rev(struct pluto *pluto)
|
|
{
|
|
u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
|
|
dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
|
|
(val >> 12) & 0x0f, (val >> 4) & 0xff);
|
|
}
|
|
|
|
static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac)
|
|
{
|
|
u32 val = pluto_readreg(pluto, REG_MMAC);
|
|
mac[0] = (val >> 8) & 0xff;
|
|
mac[1] = (val >> 0) & 0xff;
|
|
|
|
val = pluto_readreg(pluto, REG_IMAC);
|
|
mac[2] = (val >> 8) & 0xff;
|
|
mac[3] = (val >> 0) & 0xff;
|
|
|
|
val = pluto_readreg(pluto, REG_LMAC);
|
|
mac[4] = (val >> 8) & 0xff;
|
|
mac[5] = (val >> 0) & 0xff;
|
|
|
|
dev_info(&pluto->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
}
|
|
|
|
static int __devinit pluto_read_serial(struct pluto *pluto)
|
|
{
|
|
struct pci_dev *pdev = pluto->pdev;
|
|
unsigned int i, j;
|
|
u8 __iomem *cis;
|
|
|
|
cis = pci_iomap(pdev, 1, 0);
|
|
if (!cis)
|
|
return -EIO;
|
|
|
|
dev_info(&pdev->dev, "S/N ");
|
|
|
|
for (i = 0xe0; i < 0x100; i += 4) {
|
|
u32 val = readl(&cis[i]);
|
|
for (j = 0; j < 32; j += 8) {
|
|
if ((val & 0xff) == 0xff)
|
|
goto out;
|
|
printk("%c", val & 0xff);
|
|
val >>= 8;
|
|
}
|
|
}
|
|
out:
|
|
printk("\n");
|
|
pci_iounmap(pdev, cis);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit pluto2_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct pluto *pluto;
|
|
struct dvb_adapter *dvb_adapter;
|
|
struct dvb_demux *dvbdemux;
|
|
struct dmx_demux *dmx;
|
|
int ret = -ENOMEM;
|
|
|
|
pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
|
|
if (!pluto)
|
|
goto out;
|
|
|
|
pluto->pdev = pdev;
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret < 0)
|
|
goto err_kfree;
|
|
|
|
/* enable interrupts */
|
|
pci_write_config_dword(pdev, 0x6c, 0x8000);
|
|
|
|
ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (ret < 0)
|
|
goto err_pci_disable_device;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
ret = pci_request_regions(pdev, DRIVER_NAME);
|
|
if (ret < 0)
|
|
goto err_pci_disable_device;
|
|
|
|
pluto->io_mem = pci_iomap(pdev, 0, 0x40);
|
|
if (!pluto->io_mem) {
|
|
ret = -EIO;
|
|
goto err_pci_release_regions;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, pluto);
|
|
|
|
ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
|
|
if (ret < 0)
|
|
goto err_pci_iounmap;
|
|
|
|
ret = pluto_hw_init(pluto);
|
|
if (ret < 0)
|
|
goto err_free_irq;
|
|
|
|
/* i2c */
|
|
i2c_set_adapdata(&pluto->i2c_adap, pluto);
|
|
strcpy(pluto->i2c_adap.name, DRIVER_NAME);
|
|
pluto->i2c_adap.owner = THIS_MODULE;
|
|
pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
|
|
pluto->i2c_adap.dev.parent = &pdev->dev;
|
|
pluto->i2c_adap.algo_data = &pluto->i2c_bit;
|
|
pluto->i2c_bit.data = pluto;
|
|
pluto->i2c_bit.setsda = pluto_setsda;
|
|
pluto->i2c_bit.setscl = pluto_setscl;
|
|
pluto->i2c_bit.getsda = pluto_getsda;
|
|
pluto->i2c_bit.getscl = pluto_getscl;
|
|
pluto->i2c_bit.udelay = 10;
|
|
pluto->i2c_bit.timeout = 10;
|
|
|
|
/* Raise SCL and SDA */
|
|
pluto_setsda(pluto, 1);
|
|
pluto_setscl(pluto, 1);
|
|
|
|
ret = i2c_bit_add_bus(&pluto->i2c_adap);
|
|
if (ret < 0)
|
|
goto err_pluto_hw_exit;
|
|
|
|
/* dvb */
|
|
ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
|
|
THIS_MODULE, &pdev->dev, adapter_nr);
|
|
if (ret < 0)
|
|
goto err_i2c_del_adapter;
|
|
|
|
dvb_adapter = &pluto->dvb_adapter;
|
|
|
|
pluto_read_rev(pluto);
|
|
pluto_read_serial(pluto);
|
|
pluto_read_mac(pluto, dvb_adapter->proposed_mac);
|
|
|
|
dvbdemux = &pluto->demux;
|
|
dvbdemux->filternum = 256;
|
|
dvbdemux->feednum = 256;
|
|
dvbdemux->start_feed = pluto_start_feed;
|
|
dvbdemux->stop_feed = pluto_stop_feed;
|
|
dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
|
|
DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
|
|
ret = dvb_dmx_init(dvbdemux);
|
|
if (ret < 0)
|
|
goto err_dvb_unregister_adapter;
|
|
|
|
dmx = &dvbdemux->dmx;
|
|
|
|
pluto->hw_frontend.source = DMX_FRONTEND_0;
|
|
pluto->mem_frontend.source = DMX_MEMORY_FE;
|
|
pluto->dmxdev.filternum = NHWFILTERS;
|
|
pluto->dmxdev.demux = dmx;
|
|
|
|
ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
|
|
if (ret < 0)
|
|
goto err_dvb_dmx_release;
|
|
|
|
ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
|
|
if (ret < 0)
|
|
goto err_dvb_dmxdev_release;
|
|
|
|
ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
|
|
if (ret < 0)
|
|
goto err_remove_hw_frontend;
|
|
|
|
ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
|
|
if (ret < 0)
|
|
goto err_remove_mem_frontend;
|
|
|
|
ret = frontend_init(pluto);
|
|
if (ret < 0)
|
|
goto err_disconnect_frontend;
|
|
|
|
dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
|
|
out:
|
|
return ret;
|
|
|
|
err_disconnect_frontend:
|
|
dmx->disconnect_frontend(dmx);
|
|
err_remove_mem_frontend:
|
|
dmx->remove_frontend(dmx, &pluto->mem_frontend);
|
|
err_remove_hw_frontend:
|
|
dmx->remove_frontend(dmx, &pluto->hw_frontend);
|
|
err_dvb_dmxdev_release:
|
|
dvb_dmxdev_release(&pluto->dmxdev);
|
|
err_dvb_dmx_release:
|
|
dvb_dmx_release(dvbdemux);
|
|
err_dvb_unregister_adapter:
|
|
dvb_unregister_adapter(dvb_adapter);
|
|
err_i2c_del_adapter:
|
|
i2c_del_adapter(&pluto->i2c_adap);
|
|
err_pluto_hw_exit:
|
|
pluto_hw_exit(pluto);
|
|
err_free_irq:
|
|
free_irq(pdev->irq, pluto);
|
|
err_pci_iounmap:
|
|
pci_iounmap(pdev, pluto->io_mem);
|
|
err_pci_release_regions:
|
|
pci_release_regions(pdev);
|
|
err_pci_disable_device:
|
|
pci_disable_device(pdev);
|
|
err_kfree:
|
|
pci_set_drvdata(pdev, NULL);
|
|
kfree(pluto);
|
|
goto out;
|
|
}
|
|
|
|
static void __devexit pluto2_remove(struct pci_dev *pdev)
|
|
{
|
|
struct pluto *pluto = pci_get_drvdata(pdev);
|
|
struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
|
|
struct dvb_demux *dvbdemux = &pluto->demux;
|
|
struct dmx_demux *dmx = &dvbdemux->dmx;
|
|
|
|
dmx->close(dmx);
|
|
dvb_net_release(&pluto->dvbnet);
|
|
if (pluto->fe)
|
|
dvb_unregister_frontend(pluto->fe);
|
|
|
|
dmx->disconnect_frontend(dmx);
|
|
dmx->remove_frontend(dmx, &pluto->mem_frontend);
|
|
dmx->remove_frontend(dmx, &pluto->hw_frontend);
|
|
dvb_dmxdev_release(&pluto->dmxdev);
|
|
dvb_dmx_release(dvbdemux);
|
|
dvb_unregister_adapter(dvb_adapter);
|
|
i2c_del_adapter(&pluto->i2c_adap);
|
|
pluto_hw_exit(pluto);
|
|
free_irq(pdev->irq, pluto);
|
|
pci_iounmap(pdev, pluto->io_mem);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
kfree(pluto);
|
|
}
|
|
|
|
#ifndef PCI_VENDOR_ID_SCM
|
|
#define PCI_VENDOR_ID_SCM 0x0432
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_PLUTO2
|
|
#define PCI_DEVICE_ID_PLUTO2 0x0001
|
|
#endif
|
|
|
|
static struct pci_device_id pluto2_id_table[] __devinitdata = {
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SCM,
|
|
.device = PCI_DEVICE_ID_PLUTO2,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
}, {
|
|
/* empty */
|
|
},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, pluto2_id_table);
|
|
|
|
static struct pci_driver pluto2_driver = {
|
|
.name = DRIVER_NAME,
|
|
.id_table = pluto2_id_table,
|
|
.probe = pluto2_probe,
|
|
.remove = __devexit_p(pluto2_remove),
|
|
};
|
|
|
|
static int __init pluto2_init(void)
|
|
{
|
|
return pci_register_driver(&pluto2_driver);
|
|
}
|
|
|
|
static void __exit pluto2_exit(void)
|
|
{
|
|
pci_unregister_driver(&pluto2_driver);
|
|
}
|
|
|
|
module_init(pluto2_init);
|
|
module_exit(pluto2_exit);
|
|
|
|
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
|
|
MODULE_DESCRIPTION("Pluto2 driver");
|
|
MODULE_LICENSE("GPL");
|