forked from Minki/linux
e7b3dc7ef1
smc91x is shared between many different platforms. Each platform needs to specify the interrupt type, and in some cases the irq type depends on more than just the build configuration - it depends on runtime checks. Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide a way for these flags to be passed via the IRQ resource itself. Note that IRQF_TRIGGER_* constants are intentionally defined to correspond with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that the low bits of PCI iomem resources correspond with the BAR flag bits. Also provide a way to configure smc91x to read the IRQ flags from the resource. Once all platforms have been converted over (signified by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@redhat.com>
279 lines
6.4 KiB
C
279 lines
6.4 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/zylonite.c
|
|
*
|
|
* Support for the PXA3xx Development Platform (aka Zylonite)
|
|
*
|
|
* Copyright (C) 2006 Marvell International Ltd.
|
|
*
|
|
* 2007-09-04: eric miao <eric.miao@marvell.com>
|
|
* rewrite to align with latest kernel
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pxafb.h>
|
|
#include <asm/arch/zylonite.h>
|
|
#include <asm/arch/mmc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
#define MAX_SLOTS 3
|
|
struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
|
|
|
|
int gpio_backlight;
|
|
int gpio_eth_irq;
|
|
|
|
int lcd_id;
|
|
int lcd_orientation;
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = ZYLONITE_ETH_PHYS + 0x300,
|
|
.end = ZYLONITE_ETH_PHYS + 0xfffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = -1, /* for run-time assignment */
|
|
.end = -1,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
|
|
static void zylonite_backlight_power(int on)
|
|
{
|
|
gpio_set_value(gpio_backlight, on);
|
|
}
|
|
|
|
static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
|
|
.pixclock = 110000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 4,
|
|
.left_margin = 6,
|
|
.right_margin = 4,
|
|
.vsync_len = 2,
|
|
.upper_margin = 2,
|
|
.lower_margin = 3,
|
|
.sync = FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
|
|
.pixclock = 50000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 1,
|
|
.left_margin = 0x9f,
|
|
.right_margin = 1,
|
|
.vsync_len = 44,
|
|
.upper_margin = 0,
|
|
.lower_margin = 0,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
|
|
.num_modes = 1,
|
|
.lccr0 = LCCR0_Act,
|
|
.lccr3 = LCCR3_PCP,
|
|
.pxafb_backlight_power = zylonite_backlight_power,
|
|
};
|
|
|
|
static struct pxafb_mode_info sharp_ls037_modes[] = {
|
|
[0] = {
|
|
.pixclock = 158000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 4,
|
|
.left_margin = 39,
|
|
.right_margin = 39,
|
|
.vsync_len = 1,
|
|
.upper_margin = 2,
|
|
.lower_margin = 3,
|
|
.sync = 0,
|
|
},
|
|
[1] = {
|
|
.pixclock = 39700,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.bpp = 16,
|
|
.hsync_len = 8,
|
|
.left_margin = 81,
|
|
.right_margin = 81,
|
|
.vsync_len = 1,
|
|
.upper_margin = 2,
|
|
.lower_margin = 7,
|
|
.sync = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info zylonite_sharp_lcd_info = {
|
|
.modes = sharp_ls037_modes,
|
|
.num_modes = 2,
|
|
.lccr0 = LCCR0_Act,
|
|
.lccr3 = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP,
|
|
.pxafb_backlight_power = zylonite_backlight_power,
|
|
};
|
|
|
|
static void __init zylonite_init_lcd(void)
|
|
{
|
|
/* backlight GPIO: output, default on */
|
|
gpio_direction_output(gpio_backlight, 1);
|
|
|
|
if (lcd_id & 0x20) {
|
|
set_pxa_fb_info(&zylonite_sharp_lcd_info);
|
|
return;
|
|
}
|
|
|
|
/* legacy LCD panels, it would be handy here if LCD panel type can
|
|
* be decided at run-time
|
|
*/
|
|
if (1)
|
|
zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
|
|
else
|
|
zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
|
|
|
|
set_pxa_fb_info(&zylonite_toshiba_lcd_info);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_lcd(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC)
|
|
static int zylonite_mci_ro(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
|
|
}
|
|
|
|
static int zylonite_mci_init(struct device *dev,
|
|
irq_handler_t zylonite_detect_int,
|
|
void *data)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
int err, cd_irq, gpio_cd, gpio_wp;
|
|
|
|
cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
|
|
gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
|
|
gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
|
|
|
|
/*
|
|
* setup GPIO for Zylonite MMC controller
|
|
*/
|
|
err = gpio_request(gpio_cd, "mmc card detect");
|
|
if (err)
|
|
goto err_request_cd;
|
|
gpio_direction_input(gpio_cd);
|
|
|
|
err = gpio_request(gpio_wp, "mmc write protect");
|
|
if (err)
|
|
goto err_request_wp;
|
|
gpio_direction_input(gpio_wp);
|
|
|
|
err = request_irq(cd_irq, zylonite_detect_int,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
"MMC card detect", data);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: MMC/SD/SDIO: "
|
|
"can't request card detect IRQ\n", __func__);
|
|
goto err_request_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_request_irq:
|
|
gpio_free(gpio_wp);
|
|
err_request_wp:
|
|
gpio_free(gpio_cd);
|
|
err_request_cd:
|
|
return err;
|
|
}
|
|
|
|
static void zylonite_mci_exit(struct device *dev, void *data)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
int cd_irq, gpio_cd, gpio_wp;
|
|
|
|
cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
|
|
gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
|
|
gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
|
|
|
|
free_irq(cd_irq, data);
|
|
gpio_free(gpio_cd);
|
|
gpio_free(gpio_wp);
|
|
}
|
|
|
|
static struct pxamci_platform_data zylonite_mci_platform_data = {
|
|
.detect_delay = 20,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = zylonite_mci_init,
|
|
.exit = zylonite_mci_exit,
|
|
.get_ro = zylonite_mci_ro,
|
|
};
|
|
|
|
static struct pxamci_platform_data zylonite_mci2_platform_data = {
|
|
.detect_delay = 20,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
};
|
|
|
|
static void __init zylonite_init_mmc(void)
|
|
{
|
|
pxa_set_mci_info(&zylonite_mci_platform_data);
|
|
pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
|
|
if (cpu_is_pxa310())
|
|
pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_mmc(void) {}
|
|
#endif
|
|
|
|
static void __init zylonite_init(void)
|
|
{
|
|
/* board-processor specific initialization */
|
|
zylonite_pxa300_init();
|
|
zylonite_pxa320_init();
|
|
|
|
/*
|
|
* Note: We depend that the bootloader set
|
|
* the correct value to MSC register for SMC91x.
|
|
*/
|
|
smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
|
|
smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq);
|
|
platform_device_register(&smc91x_device);
|
|
|
|
zylonite_init_lcd();
|
|
zylonite_init_mmc();
|
|
}
|
|
|
|
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
|
|
.phys_io = 0x40000000,
|
|
.boot_params = 0xa0000100,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa3xx_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = zylonite_init,
|
|
MACHINE_END
|