f10b6c99c0
Add a property to configure the slot for the voltage sense monitoring of the device. Vsense data will be sent to the processor via the slot defined by the property Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200626154143.20351-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
38 lines
1.2 KiB
Plaintext
38 lines
1.2 KiB
Plaintext
Texas Instruments TAS2562 Smart PA
|
|
|
|
The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
|
|
efficiently driving high peak power into small loudspeakers.
|
|
Integrated speaker voltage and current sense provides for
|
|
real time monitoring of loudspeaker behavior.
|
|
|
|
Required properties:
|
|
- #address-cells - Should be <1>.
|
|
- #size-cells - Should be <0>.
|
|
- compatible: - Should contain "ti,tas2562", "ti,tas2563".
|
|
- reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
|
|
- ti,imon-slot-no:- TDM TX current sense time slot.
|
|
- ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be
|
|
greater then ti,imon-slot-no.
|
|
|
|
Optional properties:
|
|
- interrupt-parent: phandle to the interrupt controller which provides
|
|
the interrupt.
|
|
- interrupts: (GPIO) interrupt to which the chip is connected.
|
|
- shut-down-gpio: GPIO used to control the state of the device.
|
|
|
|
Examples:
|
|
tas2562@4c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "ti,tas2562";
|
|
reg = <0x4c>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <14>;
|
|
|
|
shut-down-gpio = <&gpio1 15 0>;
|
|
ti,imon-slot-no = <0>;
|
|
ti,vmon-slot-no = <1>;
|
|
};
|
|
|