forked from Minki/linux
6b1baefec0
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 of the license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000437.144869442@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1193 lines
30 KiB
C
1193 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/**
|
|
* SDHCI Controller driver for TI's OMAP SoCs
|
|
*
|
|
* Copyright (C) 2017 Texas Instruments
|
|
* Author: Kishon Vijay Abraham I <kishon@ti.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/sys_soc.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#include "sdhci-pltfm.h"
|
|
|
|
#define SDHCI_OMAP_CON 0x12c
|
|
#define CON_DW8 BIT(5)
|
|
#define CON_DMA_MASTER BIT(20)
|
|
#define CON_DDR BIT(19)
|
|
#define CON_CLKEXTFREE BIT(16)
|
|
#define CON_PADEN BIT(15)
|
|
#define CON_CTPL BIT(11)
|
|
#define CON_INIT BIT(1)
|
|
#define CON_OD BIT(0)
|
|
|
|
#define SDHCI_OMAP_DLL 0x0134
|
|
#define DLL_SWT BIT(20)
|
|
#define DLL_FORCE_SR_C_SHIFT 13
|
|
#define DLL_FORCE_SR_C_MASK (0x7f << DLL_FORCE_SR_C_SHIFT)
|
|
#define DLL_FORCE_VALUE BIT(12)
|
|
#define DLL_CALIB BIT(1)
|
|
|
|
#define SDHCI_OMAP_CMD 0x20c
|
|
|
|
#define SDHCI_OMAP_PSTATE 0x0224
|
|
#define PSTATE_DLEV_DAT0 BIT(20)
|
|
#define PSTATE_DATI BIT(1)
|
|
|
|
#define SDHCI_OMAP_HCTL 0x228
|
|
#define HCTL_SDBP BIT(8)
|
|
#define HCTL_SDVS_SHIFT 9
|
|
#define HCTL_SDVS_MASK (0x7 << HCTL_SDVS_SHIFT)
|
|
#define HCTL_SDVS_33 (0x7 << HCTL_SDVS_SHIFT)
|
|
#define HCTL_SDVS_30 (0x6 << HCTL_SDVS_SHIFT)
|
|
#define HCTL_SDVS_18 (0x5 << HCTL_SDVS_SHIFT)
|
|
|
|
#define SDHCI_OMAP_SYSCTL 0x22c
|
|
#define SYSCTL_CEN BIT(2)
|
|
#define SYSCTL_CLKD_SHIFT 6
|
|
#define SYSCTL_CLKD_MASK 0x3ff
|
|
|
|
#define SDHCI_OMAP_STAT 0x230
|
|
|
|
#define SDHCI_OMAP_IE 0x234
|
|
#define INT_CC_EN BIT(0)
|
|
|
|
#define SDHCI_OMAP_AC12 0x23c
|
|
#define AC12_V1V8_SIGEN BIT(19)
|
|
#define AC12_SCLK_SEL BIT(23)
|
|
|
|
#define SDHCI_OMAP_CAPA 0x240
|
|
#define CAPA_VS33 BIT(24)
|
|
#define CAPA_VS30 BIT(25)
|
|
#define CAPA_VS18 BIT(26)
|
|
|
|
#define SDHCI_OMAP_CAPA2 0x0244
|
|
#define CAPA2_TSDR50 BIT(13)
|
|
|
|
#define SDHCI_OMAP_TIMEOUT 1 /* 1 msec */
|
|
|
|
#define SYSCTL_CLKD_MAX 0x3FF
|
|
|
|
#define IOV_1V8 1800000 /* 180000 uV */
|
|
#define IOV_3V0 3000000 /* 300000 uV */
|
|
#define IOV_3V3 3300000 /* 330000 uV */
|
|
|
|
#define MAX_PHASE_DELAY 0x7C
|
|
|
|
/* sdhci-omap controller flags */
|
|
#define SDHCI_OMAP_REQUIRE_IODELAY BIT(0)
|
|
|
|
struct sdhci_omap_data {
|
|
u32 offset;
|
|
u8 flags;
|
|
};
|
|
|
|
struct sdhci_omap_host {
|
|
char *version;
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct regulator *pbias;
|
|
bool pbias_enabled;
|
|
struct sdhci_host *host;
|
|
u8 bus_mode;
|
|
u8 power_mode;
|
|
u8 timing;
|
|
u8 flags;
|
|
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state **pinctrl_state;
|
|
bool is_tuning;
|
|
};
|
|
|
|
static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
|
|
static void sdhci_omap_stop_clock(struct sdhci_omap_host *omap_host);
|
|
|
|
static inline u32 sdhci_omap_readl(struct sdhci_omap_host *host,
|
|
unsigned int offset)
|
|
{
|
|
return readl(host->base + offset);
|
|
}
|
|
|
|
static inline void sdhci_omap_writel(struct sdhci_omap_host *host,
|
|
unsigned int offset, u32 data)
|
|
{
|
|
writel(data, host->base + offset);
|
|
}
|
|
|
|
static int sdhci_omap_set_pbias(struct sdhci_omap_host *omap_host,
|
|
bool power_on, unsigned int iov)
|
|
{
|
|
int ret;
|
|
struct device *dev = omap_host->dev;
|
|
|
|
if (IS_ERR(omap_host->pbias))
|
|
return 0;
|
|
|
|
if (power_on) {
|
|
ret = regulator_set_voltage(omap_host->pbias, iov, iov);
|
|
if (ret) {
|
|
dev_err(dev, "pbias set voltage failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (omap_host->pbias_enabled)
|
|
return 0;
|
|
|
|
ret = regulator_enable(omap_host->pbias);
|
|
if (ret) {
|
|
dev_err(dev, "pbias reg enable fail\n");
|
|
return ret;
|
|
}
|
|
|
|
omap_host->pbias_enabled = true;
|
|
} else {
|
|
if (!omap_host->pbias_enabled)
|
|
return 0;
|
|
|
|
ret = regulator_disable(omap_host->pbias);
|
|
if (ret) {
|
|
dev_err(dev, "pbias reg disable fail\n");
|
|
return ret;
|
|
}
|
|
omap_host->pbias_enabled = false;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdhci_omap_enable_iov(struct sdhci_omap_host *omap_host,
|
|
unsigned int iov)
|
|
{
|
|
int ret;
|
|
struct sdhci_host *host = omap_host->host;
|
|
struct mmc_host *mmc = host->mmc;
|
|
|
|
ret = sdhci_omap_set_pbias(omap_host, false, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!IS_ERR(mmc->supply.vqmmc)) {
|
|
ret = regulator_set_voltage(mmc->supply.vqmmc, iov, iov);
|
|
if (ret) {
|
|
dev_err(mmc_dev(mmc), "vqmmc set voltage failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = sdhci_omap_set_pbias(omap_host, true, iov);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdhci_omap_conf_bus_power(struct sdhci_omap_host *omap_host,
|
|
unsigned char signal_voltage)
|
|
{
|
|
u32 reg;
|
|
ktime_t timeout;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_HCTL);
|
|
reg &= ~HCTL_SDVS_MASK;
|
|
|
|
if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
|
reg |= HCTL_SDVS_33;
|
|
else
|
|
reg |= HCTL_SDVS_18;
|
|
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_HCTL, reg);
|
|
|
|
reg |= HCTL_SDBP;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_HCTL, reg);
|
|
|
|
/* wait 1ms */
|
|
timeout = ktime_add_ms(ktime_get(), SDHCI_OMAP_TIMEOUT);
|
|
while (1) {
|
|
bool timedout = ktime_after(ktime_get(), timeout);
|
|
|
|
if (sdhci_omap_readl(omap_host, SDHCI_OMAP_HCTL) & HCTL_SDBP)
|
|
break;
|
|
if (WARN_ON(timedout))
|
|
return;
|
|
usleep_range(5, 10);
|
|
}
|
|
}
|
|
|
|
static void sdhci_omap_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
u32 reg;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
if (enable)
|
|
reg |= (CON_CTPL | CON_CLKEXTFREE);
|
|
else
|
|
reg &= ~(CON_CTPL | CON_CLKEXTFREE);
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
|
|
sdhci_enable_sdio_irq(mmc, enable);
|
|
}
|
|
|
|
static inline void sdhci_omap_set_dll(struct sdhci_omap_host *omap_host,
|
|
int count)
|
|
{
|
|
int i;
|
|
u32 reg;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_DLL);
|
|
reg |= DLL_FORCE_VALUE;
|
|
reg &= ~DLL_FORCE_SR_C_MASK;
|
|
reg |= (count << DLL_FORCE_SR_C_SHIFT);
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
|
|
|
|
reg |= DLL_CALIB;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
|
|
for (i = 0; i < 1000; i++) {
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_DLL);
|
|
if (reg & DLL_CALIB)
|
|
break;
|
|
}
|
|
reg &= ~DLL_CALIB;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
|
|
}
|
|
|
|
static void sdhci_omap_disable_tuning(struct sdhci_omap_host *omap_host)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_AC12);
|
|
reg &= ~AC12_SCLK_SEL;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_AC12, reg);
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_DLL);
|
|
reg &= ~(DLL_FORCE_VALUE | DLL_SWT);
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
|
|
}
|
|
|
|
static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
struct thermal_zone_device *thermal_dev;
|
|
struct device *dev = omap_host->dev;
|
|
struct mmc_ios *ios = &mmc->ios;
|
|
u32 start_window = 0, max_window = 0;
|
|
bool single_point_failure = false;
|
|
bool dcrc_was_enabled = false;
|
|
u8 cur_match, prev_match = 0;
|
|
u32 length = 0, max_len = 0;
|
|
u32 phase_delay = 0;
|
|
int temperature;
|
|
int ret = 0;
|
|
u32 reg;
|
|
int i;
|
|
|
|
/* clock tuning is not needed for upto 52MHz */
|
|
if (ios->clock <= 52000000)
|
|
return 0;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CAPA2);
|
|
if (ios->timing == MMC_TIMING_UHS_SDR50 && !(reg & CAPA2_TSDR50))
|
|
return 0;
|
|
|
|
thermal_dev = thermal_zone_get_zone_by_name("cpu_thermal");
|
|
if (IS_ERR(thermal_dev)) {
|
|
dev_err(dev, "Unable to get thermal zone for tuning\n");
|
|
return PTR_ERR(thermal_dev);
|
|
}
|
|
|
|
ret = thermal_zone_get_temp(thermal_dev, &temperature);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_DLL);
|
|
reg |= DLL_SWT;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
|
|
|
|
/*
|
|
* OMAP5/DRA74X/DRA72x Errata i802:
|
|
* DCRC error interrupts (MMCHS_STAT[21] DCRC=0x1) can occur
|
|
* during the tuning procedure. So disable it during the
|
|
* tuning procedure.
|
|
*/
|
|
if (host->ier & SDHCI_INT_DATA_CRC) {
|
|
host->ier &= ~SDHCI_INT_DATA_CRC;
|
|
dcrc_was_enabled = true;
|
|
}
|
|
|
|
omap_host->is_tuning = true;
|
|
|
|
/*
|
|
* Stage 1: Search for a maximum pass window ignoring any
|
|
* any single point failures. If the tuning value ends up
|
|
* near it, move away from it in stage 2 below
|
|
*/
|
|
while (phase_delay <= MAX_PHASE_DELAY) {
|
|
sdhci_omap_set_dll(omap_host, phase_delay);
|
|
|
|
cur_match = !mmc_send_tuning(mmc, opcode, NULL);
|
|
if (cur_match) {
|
|
if (prev_match) {
|
|
length++;
|
|
} else if (single_point_failure) {
|
|
/* ignore single point failure */
|
|
length++;
|
|
} else {
|
|
start_window = phase_delay;
|
|
length = 1;
|
|
}
|
|
} else {
|
|
single_point_failure = prev_match;
|
|
}
|
|
|
|
if (length > max_len) {
|
|
max_window = start_window;
|
|
max_len = length;
|
|
}
|
|
|
|
prev_match = cur_match;
|
|
phase_delay += 4;
|
|
}
|
|
|
|
if (!max_len) {
|
|
dev_err(dev, "Unable to find match\n");
|
|
ret = -EIO;
|
|
goto tuning_error;
|
|
}
|
|
|
|
/*
|
|
* Assign tuning value as a ratio of maximum pass window based
|
|
* on temperature
|
|
*/
|
|
if (temperature < -20000)
|
|
phase_delay = min(max_window + 4 * max_len - 24,
|
|
max_window +
|
|
DIV_ROUND_UP(13 * max_len, 16) * 4);
|
|
else if (temperature < 20000)
|
|
phase_delay = max_window + DIV_ROUND_UP(9 * max_len, 16) * 4;
|
|
else if (temperature < 40000)
|
|
phase_delay = max_window + DIV_ROUND_UP(8 * max_len, 16) * 4;
|
|
else if (temperature < 70000)
|
|
phase_delay = max_window + DIV_ROUND_UP(7 * max_len, 16) * 4;
|
|
else if (temperature < 90000)
|
|
phase_delay = max_window + DIV_ROUND_UP(5 * max_len, 16) * 4;
|
|
else if (temperature < 120000)
|
|
phase_delay = max_window + DIV_ROUND_UP(4 * max_len, 16) * 4;
|
|
else
|
|
phase_delay = max_window + DIV_ROUND_UP(3 * max_len, 16) * 4;
|
|
|
|
/*
|
|
* Stage 2: Search for a single point failure near the chosen tuning
|
|
* value in two steps. First in the +3 to +10 range and then in the
|
|
* +2 to -10 range. If found, move away from it in the appropriate
|
|
* direction by the appropriate amount depending on the temperature.
|
|
*/
|
|
for (i = 3; i <= 10; i++) {
|
|
sdhci_omap_set_dll(omap_host, phase_delay + i);
|
|
|
|
if (mmc_send_tuning(mmc, opcode, NULL)) {
|
|
if (temperature < 10000)
|
|
phase_delay += i + 6;
|
|
else if (temperature < 20000)
|
|
phase_delay += i - 12;
|
|
else if (temperature < 70000)
|
|
phase_delay += i - 8;
|
|
else
|
|
phase_delay += i - 6;
|
|
|
|
goto single_failure_found;
|
|
}
|
|
}
|
|
|
|
for (i = 2; i >= -10; i--) {
|
|
sdhci_omap_set_dll(omap_host, phase_delay + i);
|
|
|
|
if (mmc_send_tuning(mmc, opcode, NULL)) {
|
|
if (temperature < 10000)
|
|
phase_delay += i + 12;
|
|
else if (temperature < 20000)
|
|
phase_delay += i + 8;
|
|
else if (temperature < 70000)
|
|
phase_delay += i + 8;
|
|
else if (temperature < 90000)
|
|
phase_delay += i + 10;
|
|
else
|
|
phase_delay += i + 12;
|
|
|
|
goto single_failure_found;
|
|
}
|
|
}
|
|
|
|
single_failure_found:
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_AC12);
|
|
if (!(reg & AC12_SCLK_SEL)) {
|
|
ret = -EIO;
|
|
goto tuning_error;
|
|
}
|
|
|
|
sdhci_omap_set_dll(omap_host, phase_delay);
|
|
|
|
omap_host->is_tuning = false;
|
|
|
|
goto ret;
|
|
|
|
tuning_error:
|
|
omap_host->is_tuning = false;
|
|
dev_err(dev, "Tuning failed\n");
|
|
sdhci_omap_disable_tuning(omap_host);
|
|
|
|
ret:
|
|
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
|
|
/* Reenable forbidden interrupt */
|
|
if (dcrc_was_enabled)
|
|
host->ier |= SDHCI_INT_DATA_CRC;
|
|
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
|
|
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_omap_card_busy(struct mmc_host *mmc)
|
|
{
|
|
u32 reg, ac12;
|
|
int ret = false;
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_omap_host *omap_host;
|
|
u32 ier = host->ier;
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
ac12 = sdhci_omap_readl(omap_host, SDHCI_OMAP_AC12);
|
|
reg &= ~CON_CLKEXTFREE;
|
|
if (ac12 & AC12_V1V8_SIGEN)
|
|
reg |= CON_CLKEXTFREE;
|
|
reg |= CON_PADEN;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
|
|
disable_irq(host->irq);
|
|
ier |= SDHCI_INT_CARD_INT;
|
|
sdhci_writel(host, ier, SDHCI_INT_ENABLE);
|
|
sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
|
|
|
|
/*
|
|
* Delay is required for PSTATE to correctly reflect
|
|
* DLEV/CLEV values after PADEN is set.
|
|
*/
|
|
usleep_range(50, 100);
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_PSTATE);
|
|
if ((reg & PSTATE_DATI) || !(reg & PSTATE_DLEV_DAT0))
|
|
ret = true;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
reg &= ~(CON_CLKEXTFREE | CON_PADEN);
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
|
|
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
|
|
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
|
|
enable_irq(host->irq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_omap_start_signal_voltage_switch(struct mmc_host *mmc,
|
|
struct mmc_ios *ios)
|
|
{
|
|
u32 reg;
|
|
int ret;
|
|
unsigned int iov;
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_omap_host *omap_host;
|
|
struct device *dev;
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
dev = omap_host->dev;
|
|
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CAPA);
|
|
if (!(reg & CAPA_VS33))
|
|
return -EOPNOTSUPP;
|
|
|
|
sdhci_omap_conf_bus_power(omap_host, ios->signal_voltage);
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_AC12);
|
|
reg &= ~AC12_V1V8_SIGEN;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_AC12, reg);
|
|
|
|
iov = IOV_3V3;
|
|
} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CAPA);
|
|
if (!(reg & CAPA_VS18))
|
|
return -EOPNOTSUPP;
|
|
|
|
sdhci_omap_conf_bus_power(omap_host, ios->signal_voltage);
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_AC12);
|
|
reg |= AC12_V1V8_SIGEN;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_AC12, reg);
|
|
|
|
iov = IOV_1V8;
|
|
} else {
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
ret = sdhci_omap_enable_iov(omap_host, iov);
|
|
if (ret) {
|
|
dev_err(dev, "failed to switch IO voltage to %dmV\n", iov);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(dev, "IO voltage switched to %dmV\n", iov);
|
|
return 0;
|
|
}
|
|
|
|
static void sdhci_omap_set_timing(struct sdhci_omap_host *omap_host, u8 timing)
|
|
{
|
|
int ret;
|
|
struct pinctrl_state *pinctrl_state;
|
|
struct device *dev = omap_host->dev;
|
|
|
|
if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
|
|
return;
|
|
|
|
if (omap_host->timing == timing)
|
|
return;
|
|
|
|
sdhci_omap_stop_clock(omap_host);
|
|
|
|
pinctrl_state = omap_host->pinctrl_state[timing];
|
|
ret = pinctrl_select_state(omap_host->pinctrl, pinctrl_state);
|
|
if (ret) {
|
|
dev_err(dev, "failed to select pinctrl state\n");
|
|
return;
|
|
}
|
|
|
|
sdhci_omap_start_clock(omap_host);
|
|
omap_host->timing = timing;
|
|
}
|
|
|
|
static void sdhci_omap_set_power_mode(struct sdhci_omap_host *omap_host,
|
|
u8 power_mode)
|
|
{
|
|
if (omap_host->bus_mode == MMC_POWER_OFF)
|
|
sdhci_omap_disable_tuning(omap_host);
|
|
omap_host->power_mode = power_mode;
|
|
}
|
|
|
|
static void sdhci_omap_set_bus_mode(struct sdhci_omap_host *omap_host,
|
|
unsigned int mode)
|
|
{
|
|
u32 reg;
|
|
|
|
if (omap_host->bus_mode == mode)
|
|
return;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
if (mode == MMC_BUSMODE_OPENDRAIN)
|
|
reg |= CON_OD;
|
|
else
|
|
reg &= ~CON_OD;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
|
|
omap_host->bus_mode = mode;
|
|
}
|
|
|
|
static void sdhci_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_omap_host *omap_host;
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
sdhci_omap_set_bus_mode(omap_host, ios->bus_mode);
|
|
sdhci_omap_set_timing(omap_host, ios->timing);
|
|
sdhci_set_ios(mmc, ios);
|
|
sdhci_omap_set_power_mode(omap_host, ios->power_mode);
|
|
}
|
|
|
|
static u16 sdhci_omap_calc_divisor(struct sdhci_pltfm_host *host,
|
|
unsigned int clock)
|
|
{
|
|
u16 dsor;
|
|
|
|
dsor = DIV_ROUND_UP(clk_get_rate(host->clk), clock);
|
|
if (dsor > SYSCTL_CLKD_MAX)
|
|
dsor = SYSCTL_CLKD_MAX;
|
|
|
|
return dsor;
|
|
}
|
|
|
|
static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_SYSCTL);
|
|
reg |= SYSCTL_CEN;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_SYSCTL, reg);
|
|
}
|
|
|
|
static void sdhci_omap_stop_clock(struct sdhci_omap_host *omap_host)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_SYSCTL);
|
|
reg &= ~SYSCTL_CEN;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_SYSCTL, reg);
|
|
}
|
|
|
|
static void sdhci_omap_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
unsigned long clkdiv;
|
|
|
|
sdhci_omap_stop_clock(omap_host);
|
|
|
|
if (!clock)
|
|
return;
|
|
|
|
clkdiv = sdhci_omap_calc_divisor(pltfm_host, clock);
|
|
clkdiv = (clkdiv & SYSCTL_CLKD_MASK) << SYSCTL_CLKD_SHIFT;
|
|
sdhci_enable_clk(host, clkdiv);
|
|
|
|
sdhci_omap_start_clock(omap_host);
|
|
}
|
|
|
|
static void sdhci_omap_set_power(struct sdhci_host *host, unsigned char mode,
|
|
unsigned short vdd)
|
|
{
|
|
struct mmc_host *mmc = host->mmc;
|
|
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
|
|
}
|
|
|
|
static int sdhci_omap_enable_dma(struct sdhci_host *host)
|
|
{
|
|
u32 reg;
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
reg |= CON_DMA_MASTER;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int sdhci_omap_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk) / SYSCTL_CLKD_MAX;
|
|
}
|
|
|
|
static void sdhci_omap_set_bus_width(struct sdhci_host *host, int width)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
u32 reg;
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
if (width == MMC_BUS_WIDTH_8)
|
|
reg |= CON_DW8;
|
|
else
|
|
reg &= ~CON_DW8;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
|
|
sdhci_set_bus_width(host, width);
|
|
}
|
|
|
|
static void sdhci_omap_init_74_clocks(struct sdhci_host *host, u8 power_mode)
|
|
{
|
|
u32 reg;
|
|
ktime_t timeout;
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
if (omap_host->power_mode == power_mode)
|
|
return;
|
|
|
|
if (power_mode != MMC_POWER_ON)
|
|
return;
|
|
|
|
disable_irq(host->irq);
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
reg |= CON_INIT;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CMD, 0x0);
|
|
|
|
/* wait 1ms */
|
|
timeout = ktime_add_ms(ktime_get(), SDHCI_OMAP_TIMEOUT);
|
|
while (1) {
|
|
bool timedout = ktime_after(ktime_get(), timeout);
|
|
|
|
if (sdhci_omap_readl(omap_host, SDHCI_OMAP_STAT) & INT_CC_EN)
|
|
break;
|
|
if (WARN_ON(timedout))
|
|
return;
|
|
usleep_range(5, 10);
|
|
}
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
reg &= ~CON_INIT;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_STAT, INT_CC_EN);
|
|
|
|
enable_irq(host->irq);
|
|
}
|
|
|
|
static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
|
|
unsigned int timing)
|
|
{
|
|
u32 reg;
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
sdhci_omap_stop_clock(omap_host);
|
|
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
|
|
if (timing == MMC_TIMING_UHS_DDR50 || timing == MMC_TIMING_MMC_DDR52)
|
|
reg |= CON_DDR;
|
|
else
|
|
reg &= ~CON_DDR;
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
|
|
|
|
sdhci_set_uhs_signaling(host, timing);
|
|
sdhci_omap_start_clock(omap_host);
|
|
}
|
|
|
|
static void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
/* Don't reset data lines during tuning operation */
|
|
if (omap_host->is_tuning)
|
|
mask &= ~SDHCI_RESET_DATA;
|
|
|
|
sdhci_reset(host, mask);
|
|
}
|
|
|
|
#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX |\
|
|
SDHCI_INT_TIMEOUT)
|
|
#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE)
|
|
|
|
static u32 sdhci_omap_irq(struct sdhci_host *host, u32 intmask)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
if (omap_host->is_tuning && host->cmd && !host->data_early &&
|
|
(intmask & CMD_ERR_MASK)) {
|
|
|
|
/*
|
|
* Since we are not resetting data lines during tuning
|
|
* operation, data error or data complete interrupts
|
|
* might still arrive. Mark this request as a failure
|
|
* but still wait for the data interrupt
|
|
*/
|
|
if (intmask & SDHCI_INT_TIMEOUT)
|
|
host->cmd->error = -ETIMEDOUT;
|
|
else
|
|
host->cmd->error = -EILSEQ;
|
|
|
|
host->cmd = NULL;
|
|
|
|
/*
|
|
* Sometimes command error interrupts and command complete
|
|
* interrupt will arrive together. Clear all command related
|
|
* interrupts here.
|
|
*/
|
|
sdhci_writel(host, intmask & CMD_MASK, SDHCI_INT_STATUS);
|
|
intmask &= ~CMD_MASK;
|
|
}
|
|
|
|
return intmask;
|
|
}
|
|
|
|
static struct sdhci_ops sdhci_omap_ops = {
|
|
.set_clock = sdhci_omap_set_clock,
|
|
.set_power = sdhci_omap_set_power,
|
|
.enable_dma = sdhci_omap_enable_dma,
|
|
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
|
|
.get_min_clock = sdhci_omap_get_min_clock,
|
|
.set_bus_width = sdhci_omap_set_bus_width,
|
|
.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
|
|
.reset = sdhci_omap_reset,
|
|
.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
|
|
.irq = sdhci_omap_irq,
|
|
};
|
|
|
|
static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)
|
|
{
|
|
u32 reg;
|
|
int ret = 0;
|
|
struct device *dev = omap_host->dev;
|
|
struct regulator *vqmmc;
|
|
|
|
vqmmc = regulator_get(dev, "vqmmc");
|
|
if (IS_ERR(vqmmc)) {
|
|
ret = PTR_ERR(vqmmc);
|
|
goto reg_put;
|
|
}
|
|
|
|
/* voltage capabilities might be set by boot loader, clear it */
|
|
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CAPA);
|
|
reg &= ~(CAPA_VS18 | CAPA_VS30 | CAPA_VS33);
|
|
|
|
if (regulator_is_supported_voltage(vqmmc, IOV_3V3, IOV_3V3))
|
|
reg |= CAPA_VS33;
|
|
if (regulator_is_supported_voltage(vqmmc, IOV_1V8, IOV_1V8))
|
|
reg |= CAPA_VS18;
|
|
|
|
sdhci_omap_writel(omap_host, SDHCI_OMAP_CAPA, reg);
|
|
|
|
reg_put:
|
|
regulator_put(vqmmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct sdhci_pltfm_data sdhci_omap_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
|
|
SDHCI_QUIRK_NO_HISPD_BIT |
|
|
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
|
|
.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN |
|
|
SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
|
|
SDHCI_QUIRK2_RSP_136_HAS_CRC |
|
|
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT,
|
|
.ops = &sdhci_omap_ops,
|
|
};
|
|
|
|
static const struct sdhci_omap_data k2g_data = {
|
|
.offset = 0x200,
|
|
};
|
|
|
|
static const struct sdhci_omap_data dra7_data = {
|
|
.offset = 0x200,
|
|
.flags = SDHCI_OMAP_REQUIRE_IODELAY,
|
|
};
|
|
|
|
static const struct of_device_id omap_sdhci_match[] = {
|
|
{ .compatible = "ti,dra7-sdhci", .data = &dra7_data },
|
|
{ .compatible = "ti,k2g-sdhci", .data = &k2g_data },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_sdhci_match);
|
|
|
|
static struct pinctrl_state
|
|
*sdhci_omap_iodelay_pinctrl_state(struct sdhci_omap_host *omap_host, char *mode,
|
|
u32 *caps, u32 capmask)
|
|
{
|
|
struct device *dev = omap_host->dev;
|
|
char *version = omap_host->version;
|
|
struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
|
|
char str[20];
|
|
|
|
if (!(*caps & capmask))
|
|
goto ret;
|
|
|
|
if (version) {
|
|
snprintf(str, 20, "%s-%s", mode, version);
|
|
pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, str);
|
|
}
|
|
|
|
if (IS_ERR(pinctrl_state))
|
|
pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
|
|
|
|
if (IS_ERR(pinctrl_state)) {
|
|
dev_err(dev, "no pinctrl state for %s mode", mode);
|
|
*caps &= ~capmask;
|
|
}
|
|
|
|
ret:
|
|
return pinctrl_state;
|
|
}
|
|
|
|
static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
|
|
*omap_host)
|
|
{
|
|
struct device *dev = omap_host->dev;
|
|
struct sdhci_host *host = omap_host->host;
|
|
struct mmc_host *mmc = host->mmc;
|
|
u32 *caps = &mmc->caps;
|
|
u32 *caps2 = &mmc->caps2;
|
|
struct pinctrl_state *state;
|
|
struct pinctrl_state **pinctrl_state;
|
|
|
|
if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
|
|
return 0;
|
|
|
|
pinctrl_state = devm_kcalloc(dev,
|
|
MMC_TIMING_MMC_HS200 + 1,
|
|
sizeof(*pinctrl_state),
|
|
GFP_KERNEL);
|
|
if (!pinctrl_state)
|
|
return -ENOMEM;
|
|
|
|
omap_host->pinctrl = devm_pinctrl_get(omap_host->dev);
|
|
if (IS_ERR(omap_host->pinctrl)) {
|
|
dev_err(dev, "Cannot get pinctrl\n");
|
|
return PTR_ERR(omap_host->pinctrl);
|
|
}
|
|
|
|
state = pinctrl_lookup_state(omap_host->pinctrl, "default");
|
|
if (IS_ERR(state)) {
|
|
dev_err(dev, "no pinctrl state for default mode\n");
|
|
return PTR_ERR(state);
|
|
}
|
|
pinctrl_state[MMC_TIMING_LEGACY] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr104", caps,
|
|
MMC_CAP_UHS_SDR104);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_UHS_SDR104] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr50", caps,
|
|
MMC_CAP_UHS_DDR50);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_UHS_DDR50] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr50", caps,
|
|
MMC_CAP_UHS_SDR50);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_UHS_SDR50] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr25", caps,
|
|
MMC_CAP_UHS_SDR25);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_UHS_SDR25] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr12", caps,
|
|
MMC_CAP_UHS_SDR12);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_UHS_SDR12] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_1_8v", caps,
|
|
MMC_CAP_1_8V_DDR);
|
|
if (!IS_ERR(state)) {
|
|
pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
|
|
} else {
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_3_3v",
|
|
caps,
|
|
MMC_CAP_3_3V_DDR);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
|
|
}
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
|
|
MMC_CAP_SD_HIGHSPEED);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_SD_HS] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
|
|
MMC_CAP_MMC_HIGHSPEED);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_MMC_HS] = state;
|
|
|
|
state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs200_1_8v", caps2,
|
|
MMC_CAP2_HS200_1_8V_SDR);
|
|
if (!IS_ERR(state))
|
|
pinctrl_state[MMC_TIMING_MMC_HS200] = state;
|
|
|
|
omap_host->pinctrl_state = pinctrl_state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct soc_device_attribute sdhci_omap_soc_devices[] = {
|
|
{
|
|
.machine = "DRA7[45]*",
|
|
.revision = "ES1.[01]",
|
|
},
|
|
{
|
|
/* sentinel */
|
|
}
|
|
};
|
|
|
|
static int sdhci_omap_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
u32 offset;
|
|
struct device *dev = &pdev->dev;
|
|
struct sdhci_host *host;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_omap_host *omap_host;
|
|
struct mmc_host *mmc;
|
|
const struct of_device_id *match;
|
|
struct sdhci_omap_data *data;
|
|
const struct soc_device_attribute *soc;
|
|
|
|
match = of_match_device(omap_sdhci_match, dev);
|
|
if (!match)
|
|
return -EINVAL;
|
|
|
|
data = (struct sdhci_omap_data *)match->data;
|
|
if (!data) {
|
|
dev_err(dev, "no sdhci omap data\n");
|
|
return -EINVAL;
|
|
}
|
|
offset = data->offset;
|
|
|
|
host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
|
|
sizeof(*omap_host));
|
|
if (IS_ERR(host)) {
|
|
dev_err(dev, "Failed sdhci_pltfm_init\n");
|
|
return PTR_ERR(host);
|
|
}
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
omap_host = sdhci_pltfm_priv(pltfm_host);
|
|
omap_host->host = host;
|
|
omap_host->base = host->ioaddr;
|
|
omap_host->dev = dev;
|
|
omap_host->power_mode = MMC_POWER_UNDEFINED;
|
|
omap_host->timing = MMC_TIMING_LEGACY;
|
|
omap_host->flags = data->flags;
|
|
host->ioaddr += offset;
|
|
|
|
mmc = host->mmc;
|
|
sdhci_get_of_property(pdev);
|
|
ret = mmc_of_parse(mmc);
|
|
if (ret)
|
|
goto err_pltfm_free;
|
|
|
|
soc = soc_device_match(sdhci_omap_soc_devices);
|
|
if (soc) {
|
|
omap_host->version = "rev11";
|
|
if (!strcmp(dev_name(dev), "4809c000.mmc"))
|
|
mmc->f_max = 96000000;
|
|
if (!strcmp(dev_name(dev), "480b4000.mmc"))
|
|
mmc->f_max = 48000000;
|
|
if (!strcmp(dev_name(dev), "480ad000.mmc"))
|
|
mmc->f_max = 48000000;
|
|
}
|
|
|
|
if (!mmc_can_gpio_ro(mmc))
|
|
mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
|
|
|
|
pltfm_host->clk = devm_clk_get(dev, "fck");
|
|
if (IS_ERR(pltfm_host->clk)) {
|
|
ret = PTR_ERR(pltfm_host->clk);
|
|
goto err_pltfm_free;
|
|
}
|
|
|
|
ret = clk_set_rate(pltfm_host->clk, mmc->f_max);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set clock to %d\n", mmc->f_max);
|
|
goto err_pltfm_free;
|
|
}
|
|
|
|
omap_host->pbias = devm_regulator_get_optional(dev, "pbias");
|
|
if (IS_ERR(omap_host->pbias)) {
|
|
ret = PTR_ERR(omap_host->pbias);
|
|
if (ret != -ENODEV)
|
|
goto err_pltfm_free;
|
|
dev_dbg(dev, "unable to get pbias regulator %d\n", ret);
|
|
}
|
|
omap_host->pbias_enabled = false;
|
|
|
|
/*
|
|
* omap_device_pm_domain has callbacks to enable the main
|
|
* functional clock, interface clock and also configure the
|
|
* SYSCONFIG register of omap devices. The callback will be invoked
|
|
* as part of pm_runtime_get_sync.
|
|
*/
|
|
pm_runtime_enable(dev);
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "pm_runtime_get_sync failed\n");
|
|
pm_runtime_put_noidle(dev);
|
|
goto err_rpm_disable;
|
|
}
|
|
|
|
ret = sdhci_omap_set_capabilities(omap_host);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set system capabilities\n");
|
|
goto err_put_sync;
|
|
}
|
|
|
|
host->mmc_host_ops.start_signal_voltage_switch =
|
|
sdhci_omap_start_signal_voltage_switch;
|
|
host->mmc_host_ops.set_ios = sdhci_omap_set_ios;
|
|
host->mmc_host_ops.card_busy = sdhci_omap_card_busy;
|
|
host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
|
|
host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
|
|
|
|
ret = sdhci_setup_host(host);
|
|
if (ret)
|
|
goto err_put_sync;
|
|
|
|
ret = sdhci_omap_config_iodelay_pinctrl_state(omap_host);
|
|
if (ret)
|
|
goto err_cleanup_host;
|
|
|
|
ret = __sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_cleanup_host;
|
|
|
|
return 0;
|
|
|
|
err_cleanup_host:
|
|
sdhci_cleanup_host(host);
|
|
|
|
err_put_sync:
|
|
pm_runtime_put_sync(dev);
|
|
|
|
err_rpm_disable:
|
|
pm_runtime_disable(dev);
|
|
|
|
err_pltfm_free:
|
|
sdhci_pltfm_free(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_omap_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
|
|
sdhci_remove_host(host, true);
|
|
pm_runtime_put_sync(dev);
|
|
pm_runtime_disable(dev);
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdhci_omap_driver = {
|
|
.probe = sdhci_omap_probe,
|
|
.remove = sdhci_omap_remove,
|
|
.driver = {
|
|
.name = "sdhci-omap",
|
|
.of_match_table = omap_sdhci_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sdhci_omap_driver);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for OMAP SoCs");
|
|
MODULE_AUTHOR("Texas Instruments Inc.");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:sdhci_omap");
|