forked from Minki/linux
2874c5fd28
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
486 lines
11 KiB
C
486 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2013 Linaro Ltd.
|
|
* Copyright (c) 2013 Hisilicon Limited.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include "dw_mmc.h"
|
|
#include "dw_mmc-pltfm.h"
|
|
|
|
/*
|
|
* hi6220 sd only support io voltage 1.8v and 3v
|
|
* Also need config AO_SCTRL_SEL18 accordingly
|
|
*/
|
|
#define AO_SCTRL_SEL18 BIT(10)
|
|
#define AO_SCTRL_CTRL3 0x40C
|
|
|
|
#define DWMMC_SDIO_ID 2
|
|
|
|
#define SOC_SCTRL_SCPERCTRL5 (0x314)
|
|
#define SDCARD_IO_SEL18 BIT(2)
|
|
|
|
#define SDCARD_RD_THRESHOLD (512)
|
|
|
|
#define GENCLK_DIV (7)
|
|
|
|
#define GPIO_CLK_ENABLE BIT(16)
|
|
#define GPIO_CLK_DIV_MASK GENMASK(11, 8)
|
|
#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13)
|
|
#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16)
|
|
#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21)
|
|
#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26)
|
|
|
|
#define TIMING_MODE 3
|
|
#define TIMING_CFG_NUM 10
|
|
|
|
#define NUM_PHASES (40)
|
|
|
|
#define ENABLE_SHIFT_MIN_SMPL (4)
|
|
#define ENABLE_SHIFT_MAX_SMPL (12)
|
|
#define USE_DLY_MIN_SMPL (11)
|
|
#define USE_DLY_MAX_SMPL (14)
|
|
|
|
struct k3_priv {
|
|
int ctrl_id;
|
|
u32 cur_speed;
|
|
struct regmap *reg;
|
|
};
|
|
|
|
static unsigned long dw_mci_hi6220_caps[] = {
|
|
MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
0
|
|
};
|
|
|
|
struct hs_timing {
|
|
u32 drv_phase;
|
|
u32 smpl_dly;
|
|
u32 smpl_phase_max;
|
|
u32 smpl_phase_min;
|
|
};
|
|
|
|
static struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
|
|
{ /* reserved */ },
|
|
{ /* SD */
|
|
{7, 0, 15, 15,}, /* 0: LEGACY 400k */
|
|
{6, 0, 4, 4,}, /* 1: MMC_HS */
|
|
{6, 0, 3, 3,}, /* 2: SD_HS */
|
|
{6, 0, 15, 15,}, /* 3: SDR12 */
|
|
{6, 0, 2, 2,}, /* 4: SDR25 */
|
|
{4, 0, 11, 0,}, /* 5: SDR50 */
|
|
{6, 4, 15, 0,}, /* 6: SDR104 */
|
|
{0}, /* 7: DDR50 */
|
|
{0}, /* 8: DDR52 */
|
|
{0}, /* 9: HS200 */
|
|
},
|
|
{ /* SDIO */
|
|
{7, 0, 15, 15,}, /* 0: LEGACY 400k */
|
|
{0}, /* 1: MMC_HS */
|
|
{6, 0, 15, 15,}, /* 2: SD_HS */
|
|
{6, 0, 15, 15,}, /* 3: SDR12 */
|
|
{6, 0, 0, 0,}, /* 4: SDR25 */
|
|
{4, 0, 12, 0,}, /* 5: SDR50 */
|
|
{5, 4, 15, 0,}, /* 6: SDR104 */
|
|
{0}, /* 7: DDR50 */
|
|
{0}, /* 8: DDR52 */
|
|
{0}, /* 9: HS200 */
|
|
}
|
|
};
|
|
|
|
static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_set_rate(host->ciu_clk, ios->clock);
|
|
if (ret)
|
|
dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
|
|
|
|
host->bus_hz = clk_get_rate(host->ciu_clk);
|
|
}
|
|
|
|
static const struct dw_mci_drv_data k3_drv_data = {
|
|
.set_ios = dw_mci_k3_set_ios,
|
|
};
|
|
|
|
static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
|
|
{
|
|
struct k3_priv *priv;
|
|
|
|
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node,
|
|
"hisilicon,peripheral-syscon");
|
|
if (IS_ERR(priv->reg))
|
|
priv->reg = NULL;
|
|
|
|
priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
|
|
if (priv->ctrl_id < 0)
|
|
priv->ctrl_id = 0;
|
|
|
|
if (priv->ctrl_id >= TIMING_MODE)
|
|
return -EINVAL;
|
|
|
|
host->priv = priv;
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct k3_priv *priv;
|
|
struct dw_mci *host;
|
|
int min_uv, max_uv;
|
|
int ret;
|
|
|
|
host = slot->host;
|
|
priv = host->priv;
|
|
|
|
if (!priv || !priv->reg)
|
|
return 0;
|
|
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
|
|
ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
|
|
AO_SCTRL_SEL18, 0);
|
|
min_uv = 3000000;
|
|
max_uv = 3000000;
|
|
} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
|
|
ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
|
|
AO_SCTRL_SEL18, AO_SCTRL_SEL18);
|
|
min_uv = 1800000;
|
|
max_uv = 1800000;
|
|
} else {
|
|
dev_dbg(host->dev, "voltage not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret) {
|
|
dev_dbg(host->dev, "switch voltage failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
|
|
return 0;
|
|
|
|
ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
|
|
if (ret) {
|
|
dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
|
|
ret, min_uv, max_uv);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
int ret;
|
|
unsigned int clock;
|
|
|
|
clock = (ios->clock <= 25000000) ? 25000000 : ios->clock;
|
|
|
|
ret = clk_set_rate(host->biu_clk, clock);
|
|
if (ret)
|
|
dev_warn(host->dev, "failed to set rate %uHz\n", clock);
|
|
|
|
host->bus_hz = clk_get_rate(host->biu_clk);
|
|
}
|
|
|
|
static int dw_mci_hi6220_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_mci_drv_data hi6220_data = {
|
|
.caps = dw_mci_hi6220_caps,
|
|
.num_caps = ARRAY_SIZE(dw_mci_hi6220_caps),
|
|
.switch_voltage = dw_mci_hi6220_switch_voltage,
|
|
.set_ios = dw_mci_hi6220_set_ios,
|
|
.parse_dt = dw_mci_hi6220_parse_dt,
|
|
.execute_tuning = dw_mci_hi6220_execute_tuning,
|
|
};
|
|
|
|
static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
|
|
int smpl_phase)
|
|
{
|
|
u32 drv_phase;
|
|
u32 smpl_dly;
|
|
u32 use_smpl_dly = 0;
|
|
u32 enable_shift = 0;
|
|
u32 reg_value;
|
|
int ctrl_id;
|
|
struct k3_priv *priv;
|
|
|
|
priv = host->priv;
|
|
ctrl_id = priv->ctrl_id;
|
|
|
|
drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
|
|
smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly;
|
|
if (smpl_phase == -1)
|
|
smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
|
|
hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
|
|
|
|
switch (timing) {
|
|
case MMC_TIMING_UHS_SDR104:
|
|
if (smpl_phase >= USE_DLY_MIN_SMPL &&
|
|
smpl_phase <= USE_DLY_MAX_SMPL)
|
|
use_smpl_dly = 1;
|
|
/* fallthrough */
|
|
case MMC_TIMING_UHS_SDR50:
|
|
if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
|
|
smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
|
|
enable_shift = 1;
|
|
break;
|
|
}
|
|
|
|
mci_writel(host, GPIO, 0x0);
|
|
usleep_range(5, 10);
|
|
|
|
reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
|
|
FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
|
|
FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
|
|
mci_writel(host, UHS_REG_EXT, reg_value);
|
|
|
|
mci_writel(host, ENABLE_SHIFT, enable_shift);
|
|
|
|
reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
|
|
FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
|
|
mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
|
|
|
|
/* We should delay 1ms wait for timing setting finished. */
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
static int dw_mci_hi3660_init(struct dw_mci *host)
|
|
{
|
|
mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
|
|
SDMMC_CARD_RD_THR_EN));
|
|
|
|
dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
|
|
host->bus_hz /= (GENCLK_DIV + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_set_sel18(struct dw_mci *host, bool set)
|
|
{
|
|
int ret;
|
|
unsigned int val;
|
|
struct k3_priv *priv;
|
|
|
|
priv = host->priv;
|
|
|
|
val = set ? SDCARD_IO_SEL18 : 0;
|
|
ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
|
|
SDCARD_IO_SEL18, val);
|
|
if (ret) {
|
|
dev_err(host->dev, "sel18 %u error\n", val);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
int ret;
|
|
unsigned long wanted;
|
|
unsigned long actual;
|
|
struct k3_priv *priv = host->priv;
|
|
|
|
if (!ios->clock || ios->clock == priv->cur_speed)
|
|
return;
|
|
|
|
wanted = ios->clock * (GENCLK_DIV + 1);
|
|
ret = clk_set_rate(host->ciu_clk, wanted);
|
|
if (ret) {
|
|
dev_err(host->dev, "failed to set rate %luHz\n", wanted);
|
|
return;
|
|
}
|
|
actual = clk_get_rate(host->ciu_clk);
|
|
|
|
dw_mci_hs_set_timing(host, ios->timing, -1);
|
|
host->bus_hz = actual / (GENCLK_DIV + 1);
|
|
host->current_speed = 0;
|
|
priv->cur_speed = host->bus_hz;
|
|
}
|
|
|
|
static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
|
|
{
|
|
int i;
|
|
int interval;
|
|
unsigned int v;
|
|
unsigned int len;
|
|
unsigned int range_start = 0;
|
|
unsigned int range_length = 0;
|
|
unsigned int middle_range = 0;
|
|
|
|
if (!sample_flag)
|
|
return -EIO;
|
|
|
|
if (~sample_flag == 0)
|
|
return 0;
|
|
|
|
i = ffs(sample_flag) - 1;
|
|
|
|
/*
|
|
* A clock cycle is divided into 32 phases,
|
|
* each of which is represented by a bit,
|
|
* finding the optimal phase.
|
|
*/
|
|
while (i < 32) {
|
|
v = ror32(sample_flag, i);
|
|
len = ffs(~v) - 1;
|
|
|
|
if (len > range_length) {
|
|
range_length = len;
|
|
range_start = i;
|
|
}
|
|
|
|
interval = ffs(v >> len) - 1;
|
|
if (interval < 0)
|
|
break;
|
|
|
|
i += len + interval;
|
|
}
|
|
|
|
middle_range = range_start + range_length / 2;
|
|
if (middle_range >= 32)
|
|
middle_range %= 32;
|
|
|
|
return middle_range;
|
|
}
|
|
|
|
static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
|
|
{
|
|
int i = 0;
|
|
struct dw_mci *host = slot->host;
|
|
struct mmc_host *mmc = slot->mmc;
|
|
int smpl_phase = 0;
|
|
u32 tuning_sample_flag = 0;
|
|
int best_clksmpl = 0;
|
|
|
|
for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
|
|
smpl_phase %= 32;
|
|
|
|
mci_writel(host, TMOUT, ~0);
|
|
dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase);
|
|
|
|
if (!mmc_send_tuning(mmc, opcode, NULL))
|
|
tuning_sample_flag |= (1 << smpl_phase);
|
|
else
|
|
tuning_sample_flag &= ~(1 << smpl_phase);
|
|
}
|
|
|
|
best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
|
|
if (best_clksmpl < 0) {
|
|
dev_err(host->dev, "All phases bad!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
|
|
|
|
dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
|
|
best_clksmpl, tuning_sample_flag);
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
|
|
struct mmc_ios *ios)
|
|
{
|
|
int ret = 0;
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct k3_priv *priv;
|
|
struct dw_mci *host;
|
|
|
|
host = slot->host;
|
|
priv = host->priv;
|
|
|
|
if (!priv || !priv->reg)
|
|
return 0;
|
|
|
|
if (priv->ctrl_id == DWMMC_SDIO_ID)
|
|
return 0;
|
|
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
|
ret = dw_mci_set_sel18(host, 0);
|
|
else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
|
|
ret = dw_mci_set_sel18(host, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!IS_ERR(mmc->supply.vqmmc)) {
|
|
ret = mmc_regulator_set_vqmmc(mmc, ios);
|
|
if (ret) {
|
|
dev_err(host->dev, "Regulator set error %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_mci_drv_data hi3660_data = {
|
|
.init = dw_mci_hi3660_init,
|
|
.set_ios = dw_mci_hi3660_set_ios,
|
|
.parse_dt = dw_mci_hi6220_parse_dt,
|
|
.execute_tuning = dw_mci_hi3660_execute_tuning,
|
|
.switch_voltage = dw_mci_hi3660_switch_voltage,
|
|
};
|
|
|
|
static const struct of_device_id dw_mci_k3_match[] = {
|
|
{ .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
|
|
{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
|
|
{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
|
|
|
|
static int dw_mci_k3_probe(struct platform_device *pdev)
|
|
{
|
|
const struct dw_mci_drv_data *drv_data;
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
|
|
drv_data = match->data;
|
|
|
|
return dw_mci_pltfm_register(pdev, drv_data);
|
|
}
|
|
|
|
static const struct dev_pm_ops dw_mci_k3_dev_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
pm_runtime_force_resume)
|
|
SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
|
|
dw_mci_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static struct platform_driver dw_mci_k3_pltfm_driver = {
|
|
.probe = dw_mci_k3_probe,
|
|
.remove = dw_mci_pltfm_remove,
|
|
.driver = {
|
|
.name = "dwmmc_k3",
|
|
.of_match_table = dw_mci_k3_match,
|
|
.pm = &dw_mci_k3_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dw_mci_k3_pltfm_driver);
|
|
|
|
MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:dwmmc_k3");
|