forked from Minki/linux
e72a060151
Introduce register mask for data-ready status register since
pressure sensors (e.g. LPS22HB) export just two channels
(BIT(0) and BIT(1)) and BIT(2) is marked reserved while in
st_sensors_new_samples_available() value read from status register
is masked using 0x7.
Moreover do not mask status register using active_scan_mask since
now status value is properly masked and if the result is not zero the
interrupt has to be consumed by the driver. This fix an issue on LPS25H
and LPS331AP where channel definition is swapped respect to status
register.
Furthermore that change allows to properly support new devices
(e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register
to figure out if the interrupt has been generated by the device.
Fixes: 97865fe413 (iio: st_sensors: verify interrupt event to status)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
848 lines
19 KiB
C
848 lines
19 KiB
C
/*
|
|
* STMicroelectronics accelerometers driver
|
|
*
|
|
* Copyright 2012-2013 STMicroelectronics Inc.
|
|
*
|
|
* Denis Ciocca <denis.ciocca@st.com>
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/buffer.h>
|
|
|
|
#include <linux/iio/common/st_sensors.h>
|
|
#include "st_accel.h"
|
|
|
|
#define ST_ACCEL_NUMBER_DATA_CHANNELS 3
|
|
|
|
/* DEFAULT VALUE FOR SENSORS */
|
|
#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
|
|
#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
|
|
#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
|
|
|
|
/* FULLSCALE */
|
|
#define ST_ACCEL_FS_AVL_2G 2
|
|
#define ST_ACCEL_FS_AVL_4G 4
|
|
#define ST_ACCEL_FS_AVL_6G 6
|
|
#define ST_ACCEL_FS_AVL_8G 8
|
|
#define ST_ACCEL_FS_AVL_16G 16
|
|
#define ST_ACCEL_FS_AVL_100G 100
|
|
#define ST_ACCEL_FS_AVL_200G 200
|
|
#define ST_ACCEL_FS_AVL_400G 400
|
|
|
|
static const struct iio_chan_spec st_accel_8bit_channels[] = {
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 8, 8,
|
|
ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 8, 8,
|
|
ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 8, 8,
|
|
ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3)
|
|
};
|
|
|
|
static const struct iio_chan_spec st_accel_12bit_channels[] = {
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
|
|
ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
|
|
ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
|
|
ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3)
|
|
};
|
|
|
|
static const struct iio_chan_spec st_accel_16bit_channels[] = {
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
|
|
ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
|
|
ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
|
|
ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3)
|
|
};
|
|
|
|
static const struct st_sensor_settings st_accel_sensors_settings[] = {
|
|
{
|
|
.wai = 0x33,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LIS3DH_ACCEL_DEV_NAME,
|
|
[1] = LSM303DLHC_ACCEL_DEV_NAME,
|
|
[2] = LSM330D_ACCEL_DEV_NAME,
|
|
[3] = LSM330DL_ACCEL_DEV_NAME,
|
|
[4] = LSM330DLC_ACCEL_DEV_NAME,
|
|
[5] = LSM303AGR_ACCEL_DEV_NAME,
|
|
[6] = LIS2DH12_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0xf0,
|
|
.odr_avl = {
|
|
{ .hz = 1, .value = 0x01, },
|
|
{ .hz = 10, .value = 0x02, },
|
|
{ .hz = 25, .value = 0x03, },
|
|
{ .hz = 50, .value = 0x04, },
|
|
{ .hz = 100, .value = 0x05, },
|
|
{ .hz = 200, .value = 0x06, },
|
|
{ .hz = 400, .value = 0x07, },
|
|
{ .hz = 1600, .value = 0x08, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0xf0,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = 0x23,
|
|
.mask = 0x30,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_2G,
|
|
.value = 0x00,
|
|
.gain = IIO_G_TO_M_S_2(1000),
|
|
},
|
|
[1] = {
|
|
.num = ST_ACCEL_FS_AVL_4G,
|
|
.value = 0x01,
|
|
.gain = IIO_G_TO_M_S_2(2000),
|
|
},
|
|
[2] = {
|
|
.num = ST_ACCEL_FS_AVL_8G,
|
|
.value = 0x02,
|
|
.gain = IIO_G_TO_M_S_2(4000),
|
|
},
|
|
[3] = {
|
|
.num = ST_ACCEL_FS_AVL_16G,
|
|
.value = 0x03,
|
|
.gain = IIO_G_TO_M_S_2(12000),
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = 0x23,
|
|
.mask = 0x80,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x22,
|
|
.mask_int1 = 0x10,
|
|
.mask_int2 = 0x00,
|
|
.addr_ihl = 0x25,
|
|
.mask_ihl = 0x02,
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x23,
|
|
.value = BIT(0),
|
|
},
|
|
.multi_read_bit = true,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = 0x32,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LIS331DLH_ACCEL_DEV_NAME,
|
|
[1] = LSM303DL_ACCEL_DEV_NAME,
|
|
[2] = LSM303DLH_ACCEL_DEV_NAME,
|
|
[3] = LSM303DLM_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0x18,
|
|
.odr_avl = {
|
|
{ .hz = 50, .value = 0x00, },
|
|
{ .hz = 100, .value = 0x01, },
|
|
{ .hz = 400, .value = 0x02, },
|
|
{ .hz = 1000, .value = 0x03, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0xe0,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = 0x23,
|
|
.mask = 0x30,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_2G,
|
|
.value = 0x00,
|
|
.gain = IIO_G_TO_M_S_2(1000),
|
|
},
|
|
[1] = {
|
|
.num = ST_ACCEL_FS_AVL_4G,
|
|
.value = 0x01,
|
|
.gain = IIO_G_TO_M_S_2(2000),
|
|
},
|
|
[2] = {
|
|
.num = ST_ACCEL_FS_AVL_8G,
|
|
.value = 0x03,
|
|
.gain = IIO_G_TO_M_S_2(3900),
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = 0x23,
|
|
.mask = 0x80,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x22,
|
|
.mask_int1 = 0x02,
|
|
.mask_int2 = 0x10,
|
|
.addr_ihl = 0x22,
|
|
.mask_ihl = 0x80,
|
|
.addr_od = 0x22,
|
|
.mask_od = 0x40,
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x23,
|
|
.value = BIT(0),
|
|
},
|
|
.multi_read_bit = true,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = 0x40,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LSM330_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0xf0,
|
|
.odr_avl = {
|
|
{ .hz = 3, .value = 0x01, },
|
|
{ .hz = 6, .value = 0x02, },
|
|
{ .hz = 12, .value = 0x03, },
|
|
{ .hz = 25, .value = 0x04, },
|
|
{ .hz = 50, .value = 0x05, },
|
|
{ .hz = 100, .value = 0x06, },
|
|
{ .hz = 200, .value = 0x07, },
|
|
{ .hz = 400, .value = 0x08, },
|
|
{ .hz = 800, .value = 0x09, },
|
|
{ .hz = 1600, .value = 0x0a, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0xf0,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = 0x24,
|
|
.mask = 0x38,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_2G,
|
|
.value = 0x00,
|
|
.gain = IIO_G_TO_M_S_2(61),
|
|
},
|
|
[1] = {
|
|
.num = ST_ACCEL_FS_AVL_4G,
|
|
.value = 0x01,
|
|
.gain = IIO_G_TO_M_S_2(122),
|
|
},
|
|
[2] = {
|
|
.num = ST_ACCEL_FS_AVL_6G,
|
|
.value = 0x02,
|
|
.gain = IIO_G_TO_M_S_2(183),
|
|
},
|
|
[3] = {
|
|
.num = ST_ACCEL_FS_AVL_8G,
|
|
.value = 0x03,
|
|
.gain = IIO_G_TO_M_S_2(244),
|
|
},
|
|
[4] = {
|
|
.num = ST_ACCEL_FS_AVL_16G,
|
|
.value = 0x04,
|
|
.gain = IIO_G_TO_M_S_2(732),
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = 0x20,
|
|
.mask = 0x08,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x23,
|
|
.mask_int1 = 0x80,
|
|
.mask_int2 = 0x00,
|
|
.addr_ihl = 0x23,
|
|
.mask_ihl = 0x40,
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
.ig1 = {
|
|
.en_addr = 0x23,
|
|
.en_mask = 0x08,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x24,
|
|
.value = BIT(0),
|
|
},
|
|
.multi_read_bit = false,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = 0x3a,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LIS3LV02DL_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0x30, /* DF1 and DF0 */
|
|
.odr_avl = {
|
|
{ .hz = 40, .value = 0x00, },
|
|
{ .hz = 160, .value = 0x01, },
|
|
{ .hz = 640, .value = 0x02, },
|
|
{ .hz = 2560, .value = 0x03, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0xc0,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = 0x21,
|
|
.mask = 0x80,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_2G,
|
|
.value = 0x00,
|
|
.gain = IIO_G_TO_M_S_2(1000),
|
|
},
|
|
[1] = {
|
|
.num = ST_ACCEL_FS_AVL_6G,
|
|
.value = 0x01,
|
|
.gain = IIO_G_TO_M_S_2(3000),
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = 0x21,
|
|
.mask = 0x40,
|
|
},
|
|
/*
|
|
* Data Alignment Setting - needs to be set to get
|
|
* left-justified data like all other sensors.
|
|
*/
|
|
.das = {
|
|
.addr = 0x21,
|
|
.mask = 0x01,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x21,
|
|
.mask_int1 = 0x04,
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x21,
|
|
.value = BIT(1),
|
|
},
|
|
.multi_read_bit = true,
|
|
.bootime = 2, /* guess */
|
|
},
|
|
{
|
|
.wai = 0x3b,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LIS331DL_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0x80,
|
|
.odr_avl = {
|
|
{ .hz = 100, .value = 0x00, },
|
|
{ .hz = 400, .value = 0x01, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0x40,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = 0x20,
|
|
.mask = 0x20,
|
|
/*
|
|
* TODO: check these resulting gain settings, these are
|
|
* not in the datsheet
|
|
*/
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_2G,
|
|
.value = 0x00,
|
|
.gain = IIO_G_TO_M_S_2(18000),
|
|
},
|
|
[1] = {
|
|
.num = ST_ACCEL_FS_AVL_8G,
|
|
.value = 0x01,
|
|
.gain = IIO_G_TO_M_S_2(72000),
|
|
},
|
|
},
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x22,
|
|
.mask_int1 = 0x04,
|
|
.mask_int2 = 0x20,
|
|
.addr_ihl = 0x22,
|
|
.mask_ihl = 0x80,
|
|
.addr_od = 0x22,
|
|
.mask_od = 0x40,
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x21,
|
|
.value = BIT(7),
|
|
},
|
|
.multi_read_bit = false,
|
|
.bootime = 2, /* guess */
|
|
},
|
|
{
|
|
.wai = 0x32,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = H3LIS331DL_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0x18,
|
|
.odr_avl = {
|
|
{ .hz = 50, .value = 0x00, },
|
|
{ .hz = 100, .value = 0x01, },
|
|
{ .hz = 400, .value = 0x02, },
|
|
{ .hz = 1000, .value = 0x03, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0x20,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = 0x23,
|
|
.mask = 0x30,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_100G,
|
|
.value = 0x00,
|
|
.gain = IIO_G_TO_M_S_2(49000),
|
|
},
|
|
[1] = {
|
|
.num = ST_ACCEL_FS_AVL_200G,
|
|
.value = 0x01,
|
|
.gain = IIO_G_TO_M_S_2(98000),
|
|
},
|
|
[2] = {
|
|
.num = ST_ACCEL_FS_AVL_400G,
|
|
.value = 0x03,
|
|
.gain = IIO_G_TO_M_S_2(195000),
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = 0x23,
|
|
.mask = 0x80,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x22,
|
|
.mask_int1 = 0x02,
|
|
.mask_int2 = 0x10,
|
|
.addr_ihl = 0x22,
|
|
.mask_ihl = 0x80,
|
|
},
|
|
.sim = {
|
|
.addr = 0x23,
|
|
.value = BIT(0),
|
|
},
|
|
.multi_read_bit = true,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
/* No WAI register present */
|
|
.sensors_supported = {
|
|
[0] = LIS3L02DQ_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0x30,
|
|
.odr_avl = {
|
|
{ .hz = 280, .value = 0x00, },
|
|
{ .hz = 560, .value = 0x01, },
|
|
{ .hz = 1120, .value = 0x02, },
|
|
{ .hz = 4480, .value = 0x03, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0xc0,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_2G,
|
|
.gain = IIO_G_TO_M_S_2(488),
|
|
},
|
|
},
|
|
},
|
|
/*
|
|
* The part has a BDU bit but if set the data is never
|
|
* updated so don't set it.
|
|
*/
|
|
.bdu = {
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x21,
|
|
.mask_int1 = 0x04,
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x21,
|
|
.value = BIT(1),
|
|
},
|
|
.multi_read_bit = false,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = 0x33,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LNG2DM_ACCEL_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0xf0,
|
|
.odr_avl = {
|
|
{ .hz = 1, .value = 0x01, },
|
|
{ .hz = 10, .value = 0x02, },
|
|
{ .hz = 25, .value = 0x03, },
|
|
{ .hz = 50, .value = 0x04, },
|
|
{ .hz = 100, .value = 0x05, },
|
|
{ .hz = 200, .value = 0x06, },
|
|
{ .hz = 400, .value = 0x07, },
|
|
{ .hz = 1600, .value = 0x08, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x20,
|
|
.mask = 0xf0,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = 0x23,
|
|
.mask = 0x30,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_ACCEL_FS_AVL_2G,
|
|
.value = 0x00,
|
|
.gain = IIO_G_TO_M_S_2(15600),
|
|
},
|
|
[1] = {
|
|
.num = ST_ACCEL_FS_AVL_4G,
|
|
.value = 0x01,
|
|
.gain = IIO_G_TO_M_S_2(31200),
|
|
},
|
|
[2] = {
|
|
.num = ST_ACCEL_FS_AVL_8G,
|
|
.value = 0x02,
|
|
.gain = IIO_G_TO_M_S_2(62500),
|
|
},
|
|
[3] = {
|
|
.num = ST_ACCEL_FS_AVL_16G,
|
|
.value = 0x03,
|
|
.gain = IIO_G_TO_M_S_2(187500),
|
|
},
|
|
},
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0x22,
|
|
.mask_int1 = 0x10,
|
|
.mask_int2 = 0x00,
|
|
.addr_ihl = 0x25,
|
|
.mask_ihl = 0x02,
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x23,
|
|
.value = BIT(0),
|
|
},
|
|
.multi_read_bit = true,
|
|
.bootime = 2,
|
|
},
|
|
};
|
|
|
|
static int st_accel_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *ch, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
int err;
|
|
struct st_sensor_data *adata = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
err = st_sensors_read_info_raw(indio_dev, ch, val);
|
|
if (err < 0)
|
|
goto read_error;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = adata->current_fullscale->gain / 1000000;
|
|
*val2 = adata->current_fullscale->gain % 1000000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = adata->odr;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
read_error:
|
|
return err;
|
|
}
|
|
|
|
static int st_accel_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
|
{
|
|
int err;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE: {
|
|
int gain;
|
|
|
|
gain = val * 1000000 + val2;
|
|
err = st_sensors_set_fullscale_by_gain(indio_dev, gain);
|
|
break;
|
|
}
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
if (val2)
|
|
return -EINVAL;
|
|
mutex_lock(&indio_dev->mlock);
|
|
err = st_sensors_set_odr(indio_dev, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return err;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
|
|
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
|
|
|
|
static struct attribute *st_accel_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group st_accel_attribute_group = {
|
|
.attrs = st_accel_attributes,
|
|
};
|
|
|
|
static const struct iio_info accel_info = {
|
|
.attrs = &st_accel_attribute_group,
|
|
.read_raw = &st_accel_read_raw,
|
|
.write_raw = &st_accel_write_raw,
|
|
.debugfs_reg_access = &st_sensors_debugfs_reg_access,
|
|
};
|
|
|
|
#ifdef CONFIG_IIO_TRIGGER
|
|
static const struct iio_trigger_ops st_accel_trigger_ops = {
|
|
.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
|
|
.validate_device = st_sensors_validate_device,
|
|
};
|
|
#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
|
|
#else
|
|
#define ST_ACCEL_TRIGGER_OPS NULL
|
|
#endif
|
|
|
|
int st_accel_common_probe(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *adata = iio_priv(indio_dev);
|
|
struct st_sensors_platform_data *pdata =
|
|
(struct st_sensors_platform_data *)adata->dev->platform_data;
|
|
int irq = adata->get_irq_data_ready(indio_dev);
|
|
int err;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &accel_info;
|
|
mutex_init(&adata->tb.buf_lock);
|
|
|
|
err = st_sensors_power_enable(indio_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
err = st_sensors_check_device_support(indio_dev,
|
|
ARRAY_SIZE(st_accel_sensors_settings),
|
|
st_accel_sensors_settings);
|
|
if (err < 0)
|
|
goto st_accel_power_off;
|
|
|
|
adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
|
|
adata->multiread_bit = adata->sensor_settings->multi_read_bit;
|
|
indio_dev->channels = adata->sensor_settings->ch;
|
|
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
|
|
|
|
adata->current_fullscale = (struct st_sensor_fullscale_avl *)
|
|
&adata->sensor_settings->fs.fs_avl[0];
|
|
adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
|
|
|
|
if (!pdata)
|
|
pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
|
|
|
|
err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
|
|
if (err < 0)
|
|
goto st_accel_power_off;
|
|
|
|
err = st_accel_allocate_ring(indio_dev);
|
|
if (err < 0)
|
|
goto st_accel_power_off;
|
|
|
|
if (irq > 0) {
|
|
err = st_sensors_allocate_trigger(indio_dev,
|
|
ST_ACCEL_TRIGGER_OPS);
|
|
if (err < 0)
|
|
goto st_accel_probe_trigger_error;
|
|
}
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err)
|
|
goto st_accel_device_register_error;
|
|
|
|
dev_info(&indio_dev->dev, "registered accelerometer %s\n",
|
|
indio_dev->name);
|
|
|
|
return 0;
|
|
|
|
st_accel_device_register_error:
|
|
if (irq > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
st_accel_probe_trigger_error:
|
|
st_accel_deallocate_ring(indio_dev);
|
|
st_accel_power_off:
|
|
st_sensors_power_disable(indio_dev);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(st_accel_common_probe);
|
|
|
|
void st_accel_common_remove(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *adata = iio_priv(indio_dev);
|
|
|
|
st_sensors_power_disable(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (adata->get_irq_data_ready(indio_dev) > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
|
|
st_accel_deallocate_ring(indio_dev);
|
|
}
|
|
EXPORT_SYMBOL(st_accel_common_remove);
|
|
|
|
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
|
|
MODULE_LICENSE("GPL v2");
|