Jon Hunter e60f18d6bc ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards ... Commit ff5c9059 (ARM: dts: OMAP3+: Correct gpio #interrupts-cells property) updated the number of interrupt cells required for configuring gpios as interrupts for other devices (such as ethernet controllers). This update allowed the interrupt type (edge, level, etc) to be configured via device-tree (as described in the Documentation/devicetree/bindings/gpio/gpio-omap.txt). This broke ethernet support on the OMAP4 SDP board that defines a gpio as the ethernet IRQ because the interrupt type (level, edge, etc) was not getting configured correctly. This board use the ks8851 ethernet chip which has an active low interrupt. Fix this by defining the gpio interrupt as active-low in the device-tree binding. Please note that the OMAP4-VAR-SOM also uses the same ethernet controller and it is expected it will have the same problem. So the same fix is also applied to this board. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>		2013-05-08 15:03:35 -07:00
..
bootp	ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S	2010-11-30 13:44:24 +00:00
compressed	ARM: 7672/1: uncompress debug support for multiplatform build	2013-03-15 17:18:52 +00:00
dts	ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards	2013-05-08 15:03:35 -07:00
.gitignore	ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore	2012-01-30 11:47:37 -07:00
install.sh	kbuild: use INSTALLKERNEL to select customized installkernel script	2009-09-20 12:18:14 +02:00
Makefile	ARM: dts: remove generated .dtb files on clean	2013-03-04 17:15:35 -08:00